Configuration of updates after rebooting

Similar Questions

• MacBook Pro not completing the update after reboot

  Hello!

  I have need help and need some advice. It has been more than 3 months now that this has not been resolved. My Macbook Pro will not perform updates on the App Store after the reboot. I restarted to complete the update, but the message keeps popping up that I need to do the same thing. The software update that needs to be updated is Mac EFI Security Update 2015-001 1.0. I have a Macbook Pro 2012 OS X Lion Mountain 10.8.5. Help, please!

  the message keeps popping up that I need to do the same thing.

  Whence this message pop up?

  Update App Store problems See Linc Davis response.

  Go to the  menu with the option/alt key is pressed and select the first item. Then, go to the software/facilities the report part and see if the update is listed as installed.

• SGE2000P loses the manually configured ipv4 address after reboot

  I am setting up a new switch SGE2000P as independent. As part of the Setup, I need to assign a new IPV4 address to the switch default instead a 192.168.1.254. After that I applied the changes everything works fine, but when the reboot of the switch get the ip address back to the default. Any contributions to this issue will be appreciated.

  Elkins

  Hello Evillalona,

  I just looked at the issue you are seen and wanted to check with you on this subject.

  When you change the settings in the switch then go to the file management section

  the switch and make a copy of the running configuration to the startup configuration? I just wanted to

  check and see if that would fix the problem you are experiencing. I've heard other people with

  the same problem and that was the difficulty for them.

  Thank you

• Windows Vista updates fail to update after reboot

  Hi, I currently have a continuous problem with the Update Manager.

  I can't get the same 5 updates to install entirely after the restart since February 15, 2009.

  I tried to manually download and installing one at a time, but it still shows a failure for: -.
  cumulative update for media center for windows vista KB960544 (error 8007371C)
  Update for windows vista (error C 8007371) KB959772
  Update for windows mail filter mail junk (March 2009) KB905866 (error 800703E7)
  update security for windows vista KB960225 (error 8007371C)
  update security for windows vista (KB958690) (error 800703E7)

  Please any solution?

  -----

• Missing/crushed configuration after reboot - Weblogic 12.1.3

  When you change the configuration of weblogic through the web console, the new configuration is lost after reboot. We detected this behavior when you change the data source options and we have even lost of deployments. It seems that weblogic isn't save the config.xml file and others where the configuration is made persistent or may be crushed?

  We use centOS with stand-alone weblogic configuration and vertical cluster vwmware and docker image machine.

  Anyone with the same problem?

  Hello

  According to Oracle Note WebLogic Server: more recent Configuration changes back rolled after a reboot of the Server Admin (Doc ID 1479592.1), you must remove the directory ' {DOMAIN_HOME} / servers/domain_bak/config_bak "then try to start the server

• DB-autostart after reboot

  DB version: 11.2
  OPERATING SYSTEM: AIX
  
  For a DB application, I want to configure Auto-start after reboot of the operating system. I was under the impression that this evolution "n" 'Y' in the/etc/oratab file will do the trick. But after some googling, I found that more needs to fact.
  
  What is the professional way to configure Auto-restarting after reboot for a stand-alone database. I found the following url that describes the start automatic 8i. Is still the way to do it?
  
  http://www.Bolthole.com/Solaris/Oracle.html

  In the mentioned link, he always calls Oracle scripts

  Su - oracle - c $ORACLE_HOME/bin/dbstart
  Su - oracle - c "start ORACLE_HOME/bin/lsnrctl $".

  In 11 GR 2 it in the bin folder, you can see lsnrctl but not dbstart. You can check below link depending on your version

  http://www.Oracle-base.com/articles/Linux/AutomatingDatabaseStartupAndShutdownOnLinux.php

• Windows 7 hangs after reboot (after "Sensor HP Mobile Data Protection" updated)

  My Windows 7 Home Premium hangs (blue screen) to the 'Starting Windows' screen after reboot. And the reason for the rebate to zero (and crash) is updated to Windows "HP Mobile Data Protection Sensor" . I did hidden, but now I need to install drivers for my webcam and every time that I turn on "automatic driver installation" update of windows server, it installs not only the WebCam drivers, but also this «HP Mobile Data Protection Sensor» update Which brings me to the crash at the next restart of Windows. The only way is to return to the system restore point.

  I use a laptop "HP Compaq 6715 b" . I had Vista prior to this (it was preinstalled with HP all the "stuff"), but after upgrade (reinstallation) of windows 7, upgrading from windows found all the drivers (and graphics and sound and even the biometric device drivers), but is now something wrong after every update "HP Mobile Data Protection Sensor" . Why? Or at least I can make him 'banned '?

  P.S. I had and have the 32-bit version of Windows.

  ny6uctblu,
  Have you checked with HP on any problems with this software?  Here is a link for download of HP for the software.  You should also check that your BIOS is up to date.  I found some info on a wire of HP on the Data Protection sensor Mobile works is not propely.  This thread can also give you some other ideas.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have the same problem. whenever I start windows it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  I have the same problem. whenever I boot windows vista it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  Hi MartinWithWindowsIssues,

  Welcome to the Microsoft Vista answers Forum!

  I have some steps that may help you.

  Step 1

  Try resetting the component of windows update.

  To do this, click resolve this present in the link below. Click run in the file download dialog box and follow the steps described in the fix it Wizard.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2

  Perform a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files.

  To do this, follow the steps below:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Hope the helps of information. Please post back and we do know.

  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Update will not install after reboot required.

  Update of security for Microsoft Visual C++ 2005 Service Pack 1 (KB2538242).

  I'm running Windows 7 x 64.

  I have a Windows update that requires the closing down to install.   This is not, and after reboot, I have a slower computer.

  At this point, even removing the offending program would be useful.

  Thank you for your expertise.

  Hello

  Try the methods provided below and see if they help to resolve the issue.

  Method 1:

  In the case where you are not able to install specific updates then, try the troubleshooting provided in the link below steps to fix the problem.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Method 2:

  You can also try to reset the Windows Update components and check if that helps.

  Click on the link provided below for more information about resetting Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3:

  Start the computer in a clean boot state and then try to download the updates manually.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Download the updates manually from the link provided below.

  MFC Package security update Microsoft Visual C++ 2008 Service Pack 1

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26368

  MFC Package security update Microsoft Visual C++ 2005 Service Pack 1

  http://www.Microsoft.com/download/en/details.aspx?ID=26347

  I hope this helps.

• Pro9 Acrobat on Mac suddenly will not print pdf unless I put it on the Image to print.  Downloaded drivers for printer Canon updated and rebooted - same problem.  Problem appeared after update of Adobe, but not sure we - in the last 45 days.

  Acrobat 9 pro, suddenly will not print pdf except for the print image.  Begun in the last 45 days after the update from Adobe.  Have installed drivers for Canon updated and rebooted, but no change.

  If you look at system requirements for Acrobat 9 for Mac, you will see that it is only compatible with Mac OS X v. 10.4.11 or 10.5.

• Some ESX4 configurations are lost after the reboot of the system

  Hi people,

  I use ESX4 server for months.

  Lately, after creating a few Pools of resources (RP) and the addition of virtual machines in the pool, I noticed that after rebooting my system, I lost all the Resource Pools, I created.

  This problem of loss of configuration is not only limited to the RPs, I also lost some of the configurations of the network/portgroup after system reboot.

  This problem is is produced as well when I entered "Maintenance mode" and then then rebooted the system;  and also when I typed the command "reboot" in the bash shell (I typed 'reboot' command 'sync' several times before typing.)

  This problem becomes a kind of annoyance since I have to re-create the lost configuration each time that I reboot.

  Is it possible to manually force the ESX4 to save the configuration for that I do not keep losing part of my configurations?

  Could someone please help?

  Thanks in advance.

  Danny

  Really glad its sorted for you, as I said, I saw the question before at a customer's site and you will never know that the root is full, except if you look in the service console. It would be good to have this visible through the vi client, but in the meantime it just added monthly controls!

  Thank you

  Dan

• KB2289158, KB2443839 and KB2413389 updates require reboot after installation?

  Here are the updates for Office 2007

  Is the computer must restart for these "set up"?

  No, the useless Office updates a reboot. A reboot is required only WindowsUpdates when files are in use. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• After refreshing the computer, when it is about to finish the update that went FAILURE CONFIGURATION WINDOWS UPDATES

  Hello... I just UPDATE my computer and then when I started to update, when he is about to complete the update this showd upward

  DEFAULT CONFIGURATION WINDOWS updates what to do about it... my OS is windows 8

  Original title: I update my computer

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• Incorrect configuration of update KB2559049

  Original title: incorrect Configuration of update

  Update (KB2559049) will not properly configure during the next reboot after installation.

  [1] Q5. All specified updates installed, except for KB2544521

  [2] , I have installed on my system "Trusteer report"

  [3] Q1. Microsoft Security Essential. No third-party firewall.

  Q3. Free trial of McAfee.

  Q4. Firefox, Chrome and Safari.

  A1. If IE9 installed, KB2544521 would not be installed.

  A2. Many other Internet Explorer users have reported that KB2559049 will install after uninstalling Trusteer report & restart the computer. Give it a try.

  CF. http://answers.microsoft.com/thread/fa3bae62-312b-4428-963e-8260b9dde33c

  A3. If still no joy...

  Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

  1. when (date about) don't you install Microsoft Security Essentials (MSE) and has been the computer fully-patched to Windows Update in time?

  2. What antivirus application was installed before installing MSE, was your subscription always news, and did you uninstall it before installing MSE?

  3. do you have a uninstall the pre-installed McAfee free version to test AND THEN (b) download/run the McAfee Consumer products removal tool & reboot (c) before installing any other anti-virus applications (especially MSE) as well as updates of Windows (including the Service Packs & IE) upgrades?

• W7 Ent. SP1 x 64 clean install on the new PC - very slow to load after reboot during installation

  Hi all

  I'm busy to install W7 Ent. SP1 x 64 on two computers for a small organization non-profit of my friends, all the similar Assembly (motherboard: ASRock H81M-VG4, CPU: Intel Celeron G1840, transcend SSD). The first PC went perfectly, no problems with the installation at all. Now, I installed the second, but unfortunately the following happens:

  After restarting the installation, was asked to enter the name of the computer normally, and then to set up a password. When I clicked on next (and leaving the word password empty) the whole process seems to freeze a little, and then after a few minutes, I could choose settings updates, after which everything slowed even further. "Finalizing settings" took about three quarters of an hour. Once this done, all slowed even more, and it now displays a black screen telling me that this is not a genuine copy of Windows (had no chance to fill in the key product of course) and after about half an hour he is now "configuration of settings customized for xxxx".

  -EDIT - Windows has begin once (between my opening message and my second post), and it was terribly slow in everything that (like several minutes before opening anything). I installed the LAN driver with the idea of updating all the drivers, but after a reboot it is so late it now already taken 10 minutes to boot Windows (and is suspended in the Welcome screen again).

  I've done an another clean install after using DISKPART to format the SSD, but the same thing is happening again once unfortunately. I installed on a USB bootable, I used to install two other computers as well (one before this one and the other afterwards), and everything is fine with those. Swapping the RAM module for a good known has not changed the situation.

  All comments are welcomed, appreciated, thanks.

  All other essential drivers have been installed: video, Chipset?

  Try the SSD at the other system and see how it starts in the system causes problems.

  Also try the SSD with the painful installation in this computer to see if the problem persists.

  Could contribute to isolate if the SSD.