Configuration of updates failed - back changes...

Similar Questions

• Windows Update fails, "returning changes" hangs forever

  I seem to have bricked just computer from a friend, unless someone has an idea what to do.  This morning, I got it innocently install 108 updates.  Towards the end of this afternoon she called me to say that the computer had asked to be restarted to complete the update, and it did.  When it restarted, he began the configuration, and then failed.  He said it was back of changes, only not to turn it off and then just hung there for 5 hours.  I came to watch once again, rebooted, it (Yes, I thought was not any returning at this point), I tried booting in safe mode, but it's always the same thing - try to install an update, fails and says that this recovery changes everything as before and then it just hangs.

  I tried the system restore on three different restore points, which always goes down with a 0x800700b7 error code.  I can reboot into safe mode command prompt, but then what to do?  The computer does not restart normally.  I looked at a few threads here, but everything seems to be doing an update failed to succeed - in Windows.  I can't get into Windows.  I can't do anything but try the safe mode or watch the blue screen that says that it is.  Please - what can I do?  Other than reinstall Windows and start over (and she needs to be able to save about 400 GB of files before I can do it - so I don't want to do).  Thanks for any help you can provide

  Software don't not brick a PC.  At worst, you need to back up files, run of the mill recovery or make the superior Clean reinstall Windows 7 that if it has not been done before would be a big improvement since it seems that the OS is corrupt anyway.

  In Safe Mode, type services.msc in start search, disable the Windows Update agent.  Make it work for a while with a few reboots, then turn it back on and set to Windows Update "Check for Updates but let me decide which install."  Install the updates in small groups and if necessary use the Restore Point it creates.

  I think due to problems with the restoration of the system which should be the net of security here, I would first run the scans of the infection, SFC and if necessary a repair of steps in troubleshooting for Windows 7 installation to check during the installation.

• Error message: "logon user interface host windows stopped working. & configuration of updates fail

  Several days ago I started having the application error "windows logon UI host has stopped working".  This happens when I connect. and also on the update of windows, when they tried to configure windows update it says "failure configuration update of windows. Returning from the changes. and it restart the whole system again.

  For your information, I use windows 8. so help me solve this problem. TQ

  Hi ZakwanSalleh,

  Thank you for choosing Windows 8 and join us on our community.

  From your description, I understand that you get an error message during newspaper saying "logon user interface host windows stopped working" and after the update of Windows as "failure of windows update." Returning from the changes.

  We get the Windows log on error message if the computer is running out of memory. Then I suggest you perform these methods and check.

  Method 1:

  I suggest you perform a clean boot and remove all unnecessary programs installed on your computer.

  Clean boot: To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Here is the link for your reference perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: Please go through step 3 KB to maintain the computer to a normal startup after you resolve the issue.

  Method 2:

  I also suggest you to run a sfcscan and check.

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. When the analysis is complete, the System File Checker tool indicates whether integrity violations were found. If integrity violations are detected, the System File Checker tool allows to challenge violations of integrity

  Follow these steps to run sfcscan.

  a. press Windows + X keys and click / tap on (Admin) command prompt.

  b. in the elevated command prompt, type sfc/scannow, and then press ENTER.

  NOTE: It can take some time to finish the race.

  For the error "failed windows update Setup. Revenant changes"I suggest you follow the steps in the article and check. Here is the link for your reference.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358#method3

  It will be useful. For other related issues in Windows area it always welcome in our community.

• KB3000061 Windows update fails to 98%

  Original title : Windows 8 Windows 7 upgrade (first update of Windows fails to 98%)

  I tried (twice) to upgrade Windows 7 to Windows 8 using a burned DVD of ISO file downloaded from the Microsoft store (a year ago, long story why I do apply now the upgrade), using the option to keep my programs and files and I get to Windows 8 without any problem , but the first update of Windows says you need to install more than 100 updates and downloads all works OK, each of them, don't reboot, and then he said installation fails at startup to 98% applied and starts to recover (delete all updates). How I've frustrated, turn off the computer and restore Windows 7 using the repair CD and my image to my external hard drive backup. Who completes without error, and I'm back on Windows 7 running stable.

  In any case, it is a Lenovo m58 ThinkCenter desktop computer, and Lenovo said on their website that it comes with partition recovery of Windows 7 (which is correct) and that Windows 8 will run on this hardware (which I can't prove).

  Windows 7 is running stable with all the updates of Windows applied. SFC / SCANNOW runs since the prompt Administrator without any problem. CHKDSK /F is running without any problems. So I don't think that my Windows 7 installation is corrupt.

  Should I wait for this upgrade to work? Or do I have to give up the upgrade and return to a clean install of Windows 8, keeping nothing? (Which would have cost me more money, since I did not install media for CD/DVD burning program and other programs provided by Lenovo on the Windows 7 recovery partition). Your advice please.

  [Previous title: Windows updates fail 98%]

  OK, my Lenovo desktop computer is running Windows 8 Pro 64 bits. All Windows updates are applied.

  The only update that failed was KB3000061. According to Microsoft TechNet "KB3000061 configuration windows updates failed, returning changes", this update has no other people who (like me) upgraded a Windows 7 computer to Windows 8. The solution is simply to export and delete a single registry keys, restart and re - apply KB3000061.

  https://social.technet.Microsoft.com/forums/en-us/33f2c4bb-85D5-47F3-80dc-101158fd34bf/kb3000061-failure-configuring-Windows-updates-reverting-changes?Forum=w8itprogeneral

  A lot of my time spent in getting this computer updated from Windows 7 to Windows 8. Personally, I wish that Microsoft would update KB3000061 so that it deletes the registry key which should not be present, rather than 'failure configuration windows updates, changes the way back '.

  Thanks to Chandrashekar.K.B and the XP ROCKS! for the suggestions, I have taken during execution of this update.

• Failure to configure Windows updates, changes to restore, do not turn off your computer.

  I had this problem for about 3 hours now.

  I have a laptop called Lenovo G580, before it all went past, he had to restart while I was navigating apps send me 14 minutes to prepare.

  And then it goes up to (15%)? Then gave me the problem "configuration of the windows updates failed, restore changes. Do not turn off your computer "

  It took a while, so I had to turn it off, but he returned to the screen, same problem all the time. It does change a bit.

  It restarted once but it comes back to the same problem

  I'm not sure what I can do, I just leave and wait until the early morning hours or y at - it a specific solution for this or anything like that?

  Help please!

  Start here: http://support.microsoft.com/kb/949358

• "failed to set up the windows updates. returning from changes. do not turn off your computer.

  Hello

  I get this error "failed to configure windows updates. returning from changes. do not turn off your computer. The computer is a Samsung Ativ tab 5 and I got it for a little over a week.
  I have updated with the SW update
  The results of the troubleshooting online are:

  Problems encountered:

  Recent updates - not fixed installation problems

  Search for missing or corrupted - files detected

  Some security settings are missing or have been modified - fixed

  Registration for the service is missing or corrupt - fixed

  Windows Update error 0 x 80070490 (2014-02-10-t-11_25_11A) - fixed

  I have been through ALL the steps as described in http://support.microsoft.com/kb/949358. I have had no success.
  One thing that bothers me, is in the configuration of the system, I have a service called true vector Internet Monitor (Zone Alarm) and when the value disable as in http://support.microsoft.com/kb/929135, it is the only service still running when you perform a clean restart. I don't know if this affects the Automatic Updates/configuration or not.

  Hello

  Thanks for trying to help. Now my computer seems to be up-to-date.
  I followed your steps but MicrosoftFixit50202.msi did not like "my OS is incompatible. I use windows 8.  I couldn't run this in default or aggressive.
  I did go in Control Panel and disable antivirus and firewall Zone Alarm and reset Windows defender by default.
  I did IE default web browser I have prob changed when I got to the computer.
  I then returned to set up a clean boot and this time I managed to disable the true vector Internet Monitor (Zone Alarm) to run.
  I ran the reset troubleshooting of Windows with the same result as before is to say:
  Recent updates - not fixed installation problems
  Search for missing or corrupted - files detected
  I think I have restarted my computer at this stage and then tried to update again.
  It has not yet, but with the error, I got an error code and a link to help. I don't have not noticed this before. I followed the help and ran about 5 command prompts that have to do with the renaming of files I think.
  Then I tried updating again and this time 38 45 updates succeeded. I then ran the update again and it seemed to work on the other 7 updates.
  Although Windows Update said I was now updated, I was skeptical as when this whole thing started is started when I got the "windows installs updates" and then "failed to configure updates. Returning... etc"then I restarted my computer. At the start, there was no message on try to configure the updates, then, how do I know they are configured and working as it should?
  Thank you.

• Windows Server 2012 domain controller who fails to configure updates, coming back from changes.

  Hello

  I have a domain controller Windows Server 2012 which fails to configure updates. Each reboot it will say its configuration is updated, then in case of failure and Reverie. I can't find out what it is.

  I checked WindowsUpdate.log the only mistake I see there:

  2015 03-22 1000 1160 installation 09:36:29:735 caveat: SelfUpdate is in an error state

  Historical update check indicates a recent update that does not KB2770816:

  

  Download this update and install use autonomous to update manually the results of Setup in a message saying that the update is already installed (although windows search for the update in the updates installed appears without any results)

  I tried to launch the Windows update troubleshooting tool, that said he fixed a point, but after a reboot, I get always this error and now a new, every 20 seconds, I if I get this annoying modal popup saying that windows cannot check the updates even if it seems it can:

  

  Someone at - he counsel on how to locate the reason for the failure of the configuration of updates, perhaps, a log file will be useful information.

  Thank you.

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Windows Updates Setup error: "configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"stuck at 12%

  Just returned to windows 8, got my Norton security is and it.then update was of updates, so I can update to windows 8.1, but I got stuck when you try to update windows 8. It happened at 12%, and then tried to restart, it's 12% again.then what it says that windows does not not update reconfiguration do not turn off your computer.but I read someone post where they keyed off long the computer out the wireless USB mouse and took the card Sd, and the battery, put the battery back , but left the Sd Card and the mouse.and wireless USB, said, he started working.i tried all the this.and isn't yet working.it has been trying to run my computer hot.so I waited until what she calmed and it came again the same thing. ? Stuck in this mode.what do I do? I don't know if I should try just reset the computer of hole again or that it would be wrong.

  Original title: tried to update computers rose to 12%

  Hi Sandra,.

  Thanks for posting your query in Microsoft Community.

  You did it any significant hardware or change software on the computer before this problem?

  I understand that you can not install some updates with the error message "failure of configuration of the Windows updates...". ». I can imagine the disadvantages suffered by you and will certainly help you in the right direction to solve the problem.

  First place, according to the error message, I suggest you to try the steps in the following article and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  
  

  The question may arise if the Windows downloaded update packages are corrupt. So, if you are able to boot to the desktop with the help of the above article, I also suggest you try the following steps and check if the problem persists.

  Method 1:

  Try to run that Windows update utility provided in the following link.

  Problems with installing updates

  Try to install the updates after running the troubleshooter.

  If the problem persists, try the following method.

  Method 2:

  I suggest you to use Deployment Image Servicing and Management to fix Windows Update errors.

  (a) open an elevated command prompt. To do this, press the Windows key + Q and type in CMD right click on command prompt in the list and select run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (b) type the following commands. Press enter after each command

  • DISM.exe / Online/Cleanup-image /Scanhealth
  • DISM.exe / Online/Cleanup-image /Restorehealth

  (c) close the command prompt, and then run Windows Update again.

  Check if the problem persists.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Error Windows Updates 'configuration of Windows updates fail, returning of the changes.

  Updates to the title: original Windows.

  That means 'configuration of the Windows updates fail, returning from changes '? My laptop has been updated but got stuck on 12%, and would not go further. It is restarted 3 times and only went up to 12%.

  Was actually able to solve this problem through more research. It turns out that his receiver of wireless mouse and a SD card was stalled the installation program. I don't know why but I turned off the machine (long press the button), remove, checked all other ports, block tire and cord then put back the battery and card, turned on and it ran through the installer without problem.

• Failed to install KB2898785. Error, "updates were not correctly configured. Returning from the changes.

  32-bit o/s. Vista Home Premium. All scans/checks indicate no problems

  "Updates were not correctly configured. Restoration of the changes. ....." Advice please?

  M/S Rep told me that the (free) support for Vista is no longer available. Could the problem of security identified in the software of M/S already affected my system (published 12/10/2013 refers)?

  Hello

  I wish that refer you to this article-

  https://support.Microsoft.com/kb/949358/en-us

  Note: Make sure that you get the computer back to the Normal start once you have completed the troubleshooting steps.

  Make sure that you back up the data on the computer before you continue.

  Thank you.

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when trying to install Windows on Windows 8 updates

  Former title: windows 8

  Stuck into that and can't GET OUT! Failure of Windows updates. Restoration of the changes. Do not turn off your computer.

  Hello

  Please contact Microsoft Community.

  We understand the inconvenience that you are experiencing.

  1. How long it stays on the same screen?
  2. Windows Update is causing this issue?
  3. Have you tried to interrupt the installation at any time?

  When you try to install Windows updates, you get the following error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer. If this occurs, it may take 30 minutes to undo changes, and then the system will display the Windows login screen. Suggest you not to interrupt this until he completely undo these changes.

  Please see the article below and see if this can help you.

  https://support.Microsoft.com/en-us/KB/949358

  Let us know if you need assistance.

• "Unable to configure windows update, changes the way back" takes too long...

  My PC just newly formatted and now I can see a problem when I turn it off, he just starts to day and after that it fails... I'm worried about what it takes too long... from 10:00 until 16:00? I read an article on them, she'll just take up to 20-30 minutes, but watch?

  Is there something I can do? Can normally on my return from PC? or what I need to reformat?

  Hi Andrei,

  Thanks for posting your query in Microsoft Community.

  I understand your concern, and we as a community will try to help you in the best possible way we can.

  Here are solutions to some common problems with installing updates. You might be able to fix some problems automatically by running the Windows Update Troubleshooter.

  I suggest you check out the link below and check if it helps.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  https://support.Microsoft.com/en-us/KB/949358

  Hope the information helps, if you have any additional questions, feel free to post. We are here to help you.

  Kind regards

  Guru Kiran

• Failed to update Windows 8 (KB2756872, KB2768703), happens to 30% then get error "failure Configuring Windows updated. Changes in return ".

  I installed 2 updates.

  I installed both of them using the standalone installer which.
  First, I checked the updates using Windows updates and then installer of stand-alone download from the link more information if I can use this update later.

  Here are the 2 updates I try to install:
  1 Windows8-RT-KB2756872 - x 64
  2 Windows8-RT-KB2768703 - x 64

  I rebooted my system after installing the updates.
  Windows configures updates up to about 30% and the system gets stopped and restarted.
  Then he went it 100% and all of a sudden, I got a message something like:
  "Failure of Windows updated. Changes in return ".
  It is just returned

  Here are all the logs files (CBS.log, WindowsUpdate.log, WindowsUpdate (1) .log)
  http://bobdn.com/files/logs.zip

  Please tell me how can I get the update installed successfully.

  I finally solved my problem with the update kb2756872 ("update failed, returning of changes"). It was caused by the reserved partition Windows is not set to active (I dual boot using GRUB). Go to the Control Panel-> administrative tools control->-> computer managementdisk management and make sure that the reserved partition is marked 'Active'. This also solves many other problems I experienced as not able to activate Windows startup settings.

• "Configuration of the Windows updates failed. Restoration of the changes

  Configuration of the failure of the updates are happening all the time and takes a long time to restore updates. Please tell us how can I prevent automatic updates.

  To avoid failure, follow these steps:

  "Configuration of the Windows updates failed. Restoration of the changes

• Lenovo thinkpad tablet 2(windodws 8) 3679MU. "Configuration of updates, changes recovery do not fail"

  I recently bought a Lenovo3679MU 2 thinkpad Tablet (windodws 8).  After less than 7 weeks of use, it started auto windows update and restarts, then gives a Message ' failed updates, changes recovery configuration does not turn off'... and then stuck in the loop...! Hepatitis a me... How can I get out me of this...

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  http://support.Microsoft.com/kb/949358