Configuration of VPN RV110W - please help

Similar Questions

• Application has failed to start because its side-by-side configuration is incorrect? Please help me!

  Hello world

  I just got the new Sims 3, I installed and uninstalled several times, but every time I get the same message came 'the Launcher of the sims 3 has stopped working ".
  I checked the updates, defragmentation and tried again but no joy. In addition, the system requirements exceeds the requirements of the game.
  I spoke to someone on the EA forum and they suggested to the launcher and simply load the game, so I tried this and now I get "the application failed to start because its configuration side by side is incorrect. check the log of events applications for more information. »

  In all honesty doesn't mean a lot to me, I tried to get help from EA, but they do not respond, I hope experts can help me, it would be much appreciated.
  EM

  Hello Emma,

  Thank you for posting.  As a gamer, I have an idea of what might happen.  It seems that the configuration file for the game is not correct or may be corrupt.  Unfortunately only EA support for the Sims 3 can really help you with this problem.  I suggest that you stay in control of their forums or contact their support team.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I can NOT connect my Facebook account to make Yahtzee can access my contacts. He said that Facebook is not configured on this phone. ??? I have also a certificate has expired and do NOT know how to get a certificate of update. ?  Please Help, I have NOT b

  I can NOT connect my Facebook account to make Yahtzee can access my contacts. He said that Facebook is not configured on this phone. ??? What this mean and how can I solve this problem? I have also a certificate has expired and do NOT know how to get a certificate of update. ?  Please Help, I have NOT been able to get help from any of these Issuea. Very frustrated. Please contact me by txt on my iPhone 352-257-9403 if possible. Thank you for your support

  iOS 9.2.1

  certificate is daily horoscope

  wwhat the devil is and why it has expired?

• Please help to configure the router for internet connection 871W!

  Hello world!

  I just started styding for CCNA, so I'm totally new to Cisco stuff. Recently bought a router 871W and spent two days in a row trying to configure internet connection with no luck! I use the port console for the configs and SDM/CCP. Would be greateful if someone could tell me how to do simple configs of internet connection. I googled everything but it's still confusing. I can't assing all-IP ports FA 0-3. I used instead of the VLAN. But all tutorials use FA0 and when I try to assign an IP address to FA0 it gives me some L2 cannot be assigned or something... :/ And I am also confused at what address IP use for WAN.

  I connected the cable between the Modem and the LAN of the PC port and copied some IP addresses which I think I have to use to configure the router for internet connection. And here they are:

  ISP IP: 76.114.54.255

  SUBNET: 255.255.248.0

  GATEWAY: 76.114.48.1

  DHCP: 69.252.97.4

  DNS: 75.75.75.75

  75.75.76.76

  If you can, please help! Thank you!

  Hi david,

  Looks like your 871w can not get a dynamic IP address: % unknown DHCP problem... No possible allocation

  you could ask your ISP to perform a reset/clear MAC add and try again?

  also, kindly post lastest "show run".

  Edit: just to see you've updated your screenshot. could you add command under 4

  Mac-add 0001.4af9.8b83

• my pc configuration-1015 MB of ram, 2.5 ghz processor, 320 GB HDD, win xp sp3. I want to switch to win 7, please help

  my pc configuration-1015 MB of ram, 2.5 ghz processor, 320 GB HDD, win xp sp3. I want to switch to win 7, please help

  See if this helps:-

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

• VIP - ANALYZE Configuration Issues - Please help!

  Hello world
  
  First of all I ask you guys to Please HELP SOLVE ME THIS PROBLEM – thank you!
  
  I am installing grid Infrastructure Oracle 11 g 2 11.0.2.0.3 on Oracle Solaris 11.11 x 86 64 bit installed using Live Media on Oracle VirtualBox 4.2.6.
  
  After you have configured the nodes in the cluster, I ran the cluster verification utility that came out with 100% success.
  
  However, during root.sh run, I get the following error:
  
  /U01/app/11.2.0/grid/root.sh
  --------------------------------------------------
  CRS-4266: Vote or managed to replace the files
  # File group universal name Id disk STATE file
  -- ----- ----------------- --------- ---------
  1. online 4a3543261bc34fc9bf6e41b5d7fa04c8 (/ dev/rdsk/c8t2d0s1) [OCR]
  Located at 1 vote (s) disk.
  CRS-2672: attempt to start 'ora.asm' on 'sol1.
  CRS-2676: beginning of "ora.asm", the successful "sol1"
  CRS-2672: attempt to start ' ora. OCR.dg' on 'sol1.
  CRS-2676: beginning with ' ora. OCR.dg' on 'sol1' successful
  /U01/app/11.2.0/grid/bin/srvctl start applications sol1 - n... failed
  FirstNode configuration failed on line /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm 9196.
  /U01/app/11.2.0/grid/Perl/bin/perl-I/U01/app/11.2.0/grid/Perl/lib-I/U01/app/11.2.0/grid/CRS/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
  
  I have re-run this command to see the real errors
  
  /U01/app/11.2.0/grid/bin/srvctl start applications sol1 - n
  ------------------------------------------------------------------------------------
  RPRC-1013: failed to start of ora.net1.network resources
  RPRC-1064: failed to start of ora.net1.network on node sol1 resources
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  RPRC-1079: failed to start of ora.sol1.vip resources
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to place the "ora.sol1.vip" resource on which will achieve its investment policy
  RPRC-1013: failed to start of ora.ons resources
  RPRC-1064: failed to start of ora.ons on node sol1 resources
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  
  
  I ran the following commands to know the State of SAN and SCAN-headphones
  
  srvctl status scan
  --------------------------------
  VIP scan1 SCAN is enabled
  Scan1 VIP SCAN does not work
  VIP SCAN scan2 is enabled
  Scan2 VIP SCAN does not work
  SCAN VIP Scan3 is enabled
  Scan3 VIP SCAN does not work
  
  srvctl status scan_listener
  --------------------------------------------
  LISTENER_SCAN1 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan1 is not running
  LISTENER_SCAN2 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan2 is not running
  LISTENER_SCAN3 listener to SCAN is enabled
  SCAN of the earpiece that listener_scan3 is not running
  
  srvctl config scan_listener
  ---------------------------------------------
  LISTENER_SCAN1 listener SCAN exists. Port: TCP:1521
  LISTENER_SCAN2 listener SCAN exists. Port: TCP:1521
  LISTENER_SCAN3 listener SCAN exists. Port: TCP:1521
  
  
  Here is the content of my/etc/hosts and /etc/resolv.conf files
  
  cat/etc/hosts
  -----------------------------
  # Public
  192.168.56.101 sol1.localdomain loghost sol1
  192.168.56.102 sol2.localdomain sol2
  192.168.56.160 solfiler solfiler.localdomain
  
  # VIP
  192.168.56.111 sol1-vip sol1 - vip.localdomain
  192.168.56.112 sol2-vip sol2 - vip.localdomain
  
  # Private interconnection
  192.168.0.101 sol1-priv sol1 - priv.localdomain
  192.168.0.102 sol2-priv sol2 - priv.localdomain
  
  # Scan
  #192.168.56.201 ground-sweeping ground - scan.localdomain
  #192.168.56.202 ground-sweeping ground - scan.localdomain
  #192.168.56.203 ground-sweeping ground - scan.localdomain
  
  
  cat /etc/resolv.conf
  ------------------------------------
  #
  # AUTOMATICALLY generatedFROM_SMF_V1_
  #
  # ATTENTION: THIS FILE GENERATED FROM SMF DATA.
  # DO NOT EDIT THIS FILE. CHANGES WILL BE LOST.
  # See /etc/resolv.conf (4) for more details.
  
  Search localdomain
  nameserver 192.168.56.101
  nameserver 192.168.56.102
  nameserver 192.168.1.1
  
  
  Here are the details of the network
  
  dladm show-phys
  ----------------------------------
  MEDIA SPEED DUPLEX LINK
  Net1 Ethernet up to 1000 complete e1000g1
  NET2 Ethernet up to 1000 full e1000g2
  Net0 Ethernet up to 1000 complete e1000g0
  
  ipadm show-addr
  ---------------------------------
  ADDROBJ TYPE STATE ADDR
  127.0.0.1/8 ok static lo0/v4
  Net0/v4 dhcp ok 10.0.2.15/24
  Net1/addr static 192.168.56.101/24 ok
  NET2/addr static 192.168.0.101/24 ok
  OK static lo0/v6: 1/128
  Net0/v6 addrconf ok fe80::a00:27ff:fe5f:f484 / 10
  
  
  I did the nslookup on my name SCAN
  
  Nslookup ground-scan
  ----------------------------------
  Name: sol - scan.localdomain
  Address: 192.168.56.202
  Name: sol - scan.localdomain
  Address: 192.168.56.203
  Name: sol - scan.localdomain
  Address: 192.168.56.201
  
  I ran the following commands to see if the installation process correctly reads my SCANNING configuration
  
  srvctl stop scan_listener
  srvctl stop scan
  
  srvctl config scan
  -----------------------------
  SCAN name: ground-scan, network: 1/192.168.56.0/255.255.255.0/net1
  SCAN VIP name: scan1, IP: /sol-scan/192.168.56.203
  SCAN VIP name: scan2, IP: /sol-scan/192.168.56.201
  SCAN VIP name: scan3, IP: /sol-scan/192.168.56.202
  
  So it's good reading ANALYSIS information there is so no problem
  
  I tried to start listeners to SWEEP and ended up with the same mistakes
  
  srvctl start scan_listener
  ------------------------------------------
  RPRC-1079: could not start the ora of the resource. LISTENER_SCAN1. LSNR
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN1. LSNR' on which would meet its investment policy
  RPRC-1079: could not start the ora of the resource. LISTENER_SCAN2. LSNR
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN2. LSNR' on which would meet its investment policy
  RPRC-1079: could not start the ora of the resource. LISTENER_SCAN3. LSNR
  CRS-2674: beginning of "ora.net1.network", the "sol1' failed
  CRS-2632: there is no more servers to try to put the resources ' ora. LISTENER_SCAN3. LSNR' on which would meet its investment policy
  
  If it helps, I use automatic network default Solaris 11.11 management but I changed IP addresses of net1 and net2 manually to meet my network
  Requirements for the clusterware.
  
  I followed all the steps of the system requirements for installing under solaris 11.
  
  After checking everything I could have as detailed above, I'm now helpless as to where things go wrong
  
  What is automatic 11.11 Solaris network management that does not allow the creation of addresses IP SCAN VIP?
  
  Once again I ASK YOU GUYS to Please HELP me THIS PROBLEM FIX.
  
  Concerning
  Terry.

  Hello

  the problem is the host name of the server is resolved is on the 10.X.X.X network.
  For example, the cluster requires the public network to be on this network. And the error you get, because this network is on DHCP.

  If you have the following options that you can try:
  a.) change the server to have the host name to resolve to the 192.X network
  (b) change the order of the network adapters
  (c.) remove the network 10.X.X.X at the moment of installation

  Concerning
  Sebastian

• Configuration of blackBerry Smartphones wireless... Please help me

  I returned to my curve 9300 3 g OS 6.0 v a week. Once connected to my network domestic wi - fi, the browser only leads to the mobile network service provider and do not lead by wi - fi... I tried to disconnect the mobile network and turned on wi - fi this time too his does not work... but with the same router I can able to connect with other phones wifi brand and its operation.

  friends please suggest me the solution for this. Please help me. Thank you.

  OK turn off your wireless network which means that the network located on wifi. Then try to connect. And please tell me that you use what encrpyption in router either WES, EMTE.2, the two etc. AES.

• Please help wifi does not not ACER aspire 4710g (wireless network card problem)

  Please help me

  C:\Users\ali>ipconfig/all

  Windows IP configuration

  Name of the host...:-PC

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  Wireless Network Connection 3 Wireless LAN adapter:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Virtual WiFi Miniport adapt #.

  2

  Physical address.... : 00-1F-3A-1B-2D-F5

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :

  ... Description: Network adapter on Broadcom 802.11 g

  Physical address.... : 00-1F-3A-1B-2D-F5

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: b 3 fe80::4e8:4: 4d49:acc2% 16 (Preferred)

  Autoconfiguration IPv4 address. . : 169.254.172.194 (Preferred)

  ... Subnet mask: 255.255.0.0.

  ... Default gateway. :

  DHCPv6 IOOKING...: 318775098

  DHCPv6 DUID customer...: 00-01-00-01-1B-50-87-0D-00-1D-72-1B-B7-7D

  DNS servers: fec0:0:0:ffff:1 1%

  FEC0:0:0:FFFF:2 1%

  FEC0:0:0:FFFF:3 1%

  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Broadcom NetLink (TM) gigabit Ethernet

  Physical address.... : 00-1D-72-1B-B7-7D

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Adapter Ethernet Local Area Connection * 11:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Adapter Anchorfree VPN #2 HSS

  Physical address.... : 00-FF-03-C6-CD-54

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Adapter Ethernet Local Area Connection * 9:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Card Anchorfree VPN HSS

  Physical address.... : 00-FF-EF-4A-57-34

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  C:\Users\ali >

  AWI

  There is a problem with the wifi adapter "wireless network connection Wireless LAN adapter:" the driver is corrupted or it is incorrectly configured.

  I would start by removing the current driver of sifi and install the latest driver available.

  The IP address for the above connection is

  Autoconfiguration IPv4 address. . : 169.254.172.194 (Preferred)

  This state it does not connect with the router.  Alternatively, you can try to restart the computer and the router at the same time.

• Configuration of VPN Cisco RV220W wireless

  Hello expert support.

  We have a RV220 Wireless Network Security Cisco Firewall.  It is currently configured to provide access only to select users.  Asked me to configure it to provide access to users of hotspots or home networks.  Thought which is on the road, or at home that they would use their home network or a location of hot point to the VPN to the RV220 to access the documents they needed.

  My hypothesis was set up VPN with the users who access the QuickVPN client.  I followed the setup steps, but VPN access failed.

  Anyone who has tried or succeeded in a configuration like that?  I have read a number of posts with users having problems, just configure the VPN and access with QuickVPN.

  Any help would be greatly appreciated.

  Best regards

  Michael

  Try this first.

  http://www.Cisco.com/en/us/docs/routers/CSBR/app_notes/QuickVPN_an_OL-25680.PDF

  If the problem persists, please call the support help center.

  http://www.Cisco.com/en/us/support/tsd_cisco_small_business_support_center_contacts.html

• Need a guide to configure the VPN Client

  Hello...

  I vpn in my 506th pix and I have ver.4.0.1 software vpn client installed on the other pc (on the outside). In the firewall, there are two types of vpn; VPN site to site and remote vpn access. We use vpn for remote access to allow the vpn client to access our server right?

  This is all new to me and could you give an example how to configure vpn inside my firewall in CLI or PDM command and how to configure the software vpn client.

  Please help us beginners cisco

  Tonny

  Tony,

  Try chanigng a cisco and see if it solves... but otherwise, since you changed the PIX outside IP now, you will be able to make VPN connections to the new public IP address now, if it is routed on the internet.

  can you please try to connect now and let us know what is happening?

• How to configure the vpn using two segments in a tunnel?

  Hi guys,.

  Please help me how to set up two segment in a vpn tunnel. Our client has two segments which is 10.15 and 192.168. We have already established VPN connectivity. We can ping the 10.15 segment, but we can not ping 192.168. Attached is the sample configuration.

  crypto ISAKMP policy 1

  BA 3des

  preshared authentication

  Group 2

  ISAKMP crypto key xxxxxx address 11.11.11.11

  !

  86400 seconds, duration of life crypto ipsec security association

  !

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  !

  map SDM_CMAP_1 1 ipsec-isakmp crypto

  Tunnel description

  defined peer 11.11.11.11

  Set security-association second life 28800

  game of transformation-ESP-3DES-SHA

  match address 102

  access-list 101 deny ip 192.168.202.0 0.0.0.255 host 10.15.0.177

  access-list 101 deny ip 192.168.202.0 0.0.0.255 host 192.168.30.174

  access-list 101 permit ip 192.168.202.0 0.0.0.255 any

  access-list 102 permit ip 192.168.202.0 0.0.0.255 host 10.15.0.178

  access-list 102 permit ip 192.168.202.0 0.0.0.255 host 192.168.30.174

  Here is the extended ping.

  Router #ping

  Protocol [ip]:

  Target IP address: 10.15.0.177

  Number of repetitions [5]:

  Size of datagram [100]:

  Timeout in seconds [2]:

  Extended commands [n]: y

  Source address or the interface: 192.168.202.3

  Type of service [0]:

  Set the DF bit in the IP header? [None]:

  Validate the response data? [None]:

  Data model [0xABCD]:

  In bulk, Strict, Record, Timestamp, Verbose [no]:

  Scan the range of sizes [n]:

  Type to abort escape sequence.

  Send 5, echoes ICMP 100 bytes to 10.15.0.177, wait time is 2 seconds:

  Packet sent with a source address of 192.168.202.3

  .!!!!

  Success rate is 80% (4/5), round-trip min/avg/max = 172/172/172 ms

  Router #ping

  Protocol [ip]:

  Target IP address: 192.168.30.174

  Number of repetitions [5]:

  Size of datagram [100]:

  Timeout in seconds [2]:

  Extended commands [n]: y

  Source address or the interface: 192.168.202.3

  Type of service [0]:

  Set the DF bit in the IP header? [None]:

  Validate the response data
  ? [None]:
  Data model [0xABCD]:
  In bulk, Strict, Record, Timestamp, Verbose [no]:
  Scan the range of sizes [n]:
  Type to abort escape sequence.
  Send 5, echoes ICMP 100 bytes to 192.168.30.174, wait time is 2 seconds:
  Packet sent with a source address of 192.168.202.3
  .....
  Success rate is 0% (0/5)
  And here is the result of its crypto isakmp.
  Crypto ISAKMP router #show its

  status of DST CBC State conn-id slot

  11.11.11.11 22.22.22.22 QM_IDLE 1 0 ACTIVE

  And here is the encryption session.

  Router #show crypto sessio

  Session encryption router #show

  Current state of the session crypto

  Interface: FastEthernet0/0

  The session state: UP-ACTIVE

  Peer: 11.11.11.11 port 500

  FLOW IPSEC: allowed host 192.168.202.0/255.255.255.0 ip 192.168.30.174

  Active sAs: 2, origin: card crypto

  FLOW IPSEC: allowed host 192.168.202.0/255.255.255.0 ip 10.15.0.177

  Active sAs: 2, origin: card crypto

  And here are the details of the encryption session.

  Router #show crypto session detail

  Current state of the session crypto

  Code: C - IKE Configuration mode, D - Dead Peer Detection

  K - KeepAlive, N - NAT-traversal, X - IKE extended authentication

  Interface: FastEthernet0/0

  The session state: UP-ACTIVE

  Peer: 11.11.11.11 port fvrf 500: (none) ivrf: (none)

  Phase1_id: 11.11.11.11

  DESC: (none)

  IKE SA: local 22.22.22.22/500 remote 11.11.11.11/500 Active

  Capabilities: (None) connid:1 life time: 23:44:02

  FLOW IPSEC: allowed host 192.168.202.0/255.255.255.0 ip 192.168.30.174

  Active sAs: 2, origin: card crypto

  On arrival: dec #pkts'ed drop 0 0 life (KB/s) 4568454/27867

  Outbound: #pkts enc'ed 4 drop 1 life (KB/s) 4568453/27867

  FLOW IPSEC: allowed host 192.168.202.0/255.255.255.0 ip 10.15.0.177

  Active sAs: 2, origin: card crypto

  On arrival: #pkts dec' 8 drop 0 ed life (KB/s) 4591368/27842

  Outbound: #pkts enc'ed 8 drop 2 life (KB/s) 4591368/27842

   

  Hello

  Your side has 192.168.202.0/24 and you are trying to PING 10.15 successfully but not 192.168.30.174

  Check that the ASA has a route to 192.168.30.174 pointing to the external interface.

  Also check that the customer has defined the 192.168.30.174 as part of the VPN traffic correctly.

  Federico.

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  There is a problem with your installation of OS X. The easiest way, but not the fastest way to fix it is to reinstall the operating system. Unless you are in a hurry or have measured access to the network, it is what I suggest, especially since I don't know if there are any problems with the installation. Please backup all data before reinstalling. You won't need the backup unless something is wrong.

  The below, advanced shortcut if it works, can save you some downtime (and the cost of a download of several gigabyte, if necessary.)

  1 back up all data.

  2. disconnect all external storage devices.

  3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.

  4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  6. triple - click anywhere in the line below to select this option:

  chflags -R norestricted /V*/*/S*/*/Caches

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  7. Quit Safari. You go back to the OS X Utilities screen.

  In the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.

  Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.

  8. Select

  ▹ Restart 

  in the menu bar.

  9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.

  Select and copy this line as in step 6:

  sudo /usr/libexec/xpchelper --rebuild-cache

  Paste in a Terminal as before. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and repeat this step. You don't have to repeat the previous steps.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  10. make as in step 9 with this line:

  sudo /usr/libexec/*/app_sandbox_cache_builder --rebuild-cache

  You can then quit Terminal.

• I have problem with my iphone 6 s when I want to download on AppStore or go to error code wiil online games just 1009 I don't no what to do? Please help my ios is 9.3

  I have problem with my lphone6s when I want to download or go online or on wifi error come (code 1009) Please help I don't know what to do?

  1009 error means that you are trying to download on the app store in a

  country other than the one you are located in or from one another AppStore

  that you have an account. That error can also mean that you

  are in a country that is blocked.

  In which country are you physically located? In which country is your

  iTunes account? Which store AppStore/iTunes to the country you are

  try to download from? What VPN do you use?

• Touch pad questions, please help.

  Laptop HP Pavilion

  Model: 15-n096sa

  Product: F4T58EA #ABU

  OS: Windows 8.1 Home Premium X 64

  I installed Windows 8.1 Home Premium X 64 on my laptop last week, he had originally version 8 is installed when I bought a month ago. Since the upgrade of the OS of my touchpad is no longer allows me to scroll with two fingers or enlarge the pages, use the right click function by tapping with two fingers & also bring up the options in a Sling. All I can do now is to move the pointer and click or double-click with the pad.

  Can someone please help me solve this problem because it drives me crazy?

  Thanks in advance.

  Hello EnergySyndicate,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having problems with certain features of the touch pad doesn't work does not correctly. I think it's a question of settings. I'm you provide a HP support document: use and troubleshooting of the TouchPad and ClickPad (Windows 8) that will guide you in how to adjust settings and ensure that the common gestures of the Touchpad is correctly configured.

  I think that this will solve your problem of Touchpad and allow you to go back to listening to your computer. Thanks for posting on the HP Forums. Have a great day!