PC will not boot after loading sp3 for Windows xp__

Similar Questions

• DVD player doesn't work after installing SP3 for Windows XP.

  DVD player doesn't work after installing SP3 for Windows XP. That it disappeared from "MY COMPUTER". Device Manager sees it, but there's a yellow exclamation mark over it. See the BIOS of the motherboard and it still works in the BACK. I know SP3 is a collection of updates, but I'm not sure that is my problem. I suspect it's one of the more recent cause I have Windows automatic updates is turned on. Thank you.

  Hello Superhornet142,

  Thank you for your message.  Click HERE and run the FixIt!  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• When microsoft will not cease updates to security for Windows 7

  I heard on NPR that Microsoft will end of support and security for Windows 8 updates and my University still uses windows 7.  If this is true, discontinued today so will be updated security and service for windows 7?

  You can see here:

  http://Windows.Microsoft.com/en-us/Windows/lifecycle

• HP Deskjet 1000 printer, model: J110a printer will not print after loading Windows 10

  After loading Windows 10 would not print my printer. I deleted the printer and HP all downloads for it and turn the computer off. Start the computer up, re-load the printer driver, plugged and tried a test page. I get a message in the lower right of the screen that says "file saved in the documents folder" and no page is printed.  I tried troubleshooting, but without success.

  Hey @Bandit64,

  Issue seems to be with the spooler, try the steps below and mark the port selected in the printer driver settings.

  If you use USB - selected port must be USB001 or DOT4

  If you use a network cable - selected port must be HP TCP/IP Standard.

  1. stop the spooler
  a. click on start, Control Panel, performance and Maintenance, administrative tools, then Services.
  b. scroll the list of services for the print spooler.
  c. right-click on print spooler and stop it.

  2 remove the files of spooling.
  a. click on my computer.
  b. go to C:\WINDOWS\system32\spool\PRINTERS\.
  c. remove all files in this folder.

  NOTE: If the spooler does not work properly, this folder must be empty when the machine is not printing. Normally, it removes these files in this folder after that they were sent to the printer. Delete blocked files can free the spooler and allow it to continue normal operation.

  3. restart the spooler.

  a. click on start, Control Panel, performance and Maintenance, administrative tools, then Services.
  b. scroll the list of services for the print spooler.
  c. right click on print and start spooler.

• Pavilion dv6: Intel Centrino Wireless - n 2230 will not activate after the upgrade to Windows 10

  Model A3E82AV number

  I've been avoiding Windows 10 because I knew something like this was going to happen, but I took the pludge.  Anyway, everything seemed to work but my wireless adapter.  After the upgrade, the rocker on the keyboard turns on and outside airplane mode, and I can't switch to map wireless in Windows settings.
  
  I can get wireless adapter to turn on, go into that in a minute, but if I shutdown or reboot, the problem returns.
  
  I had success in the driver update, or by manually installing the driver, I even read a tip to make the battery, hold the power button down while the battery is out and run it upwards.  I tried to reset the BIOs to default settings.  When the computer feels like it, the wireless adapter will start working after a reboot.  If I have the toggle switch, the light goes from orange to white, I can then activate wireless and connect to my SSID.  If I stop or restart, my wireless NETWORK card no longer works and we return to the toggle keyboard turning power on and off airplane mode.  Device Manager says it is working normally and the drivers are up to date.

  I read a post from microsoft that says VPN adapters could cause corruption while making the upgrade.  I'm a professional, so I got a handful of cards, but also virtual cards VMWare Workstation installed, so I tried to come back to Win 7, remove the adapters, are re-upgrade.  It does not solve the issue.  While I was back in Windows 7, everything worked most of the time, but there were some problems with the programs, etc. which would not work right.  When I upgraded to Windows 10, some of these problems persist, so I checked my backups to make sure they were up to date and did a new install of windows 10.  I am now running a new image with just firefox, associate of HP and the different drivers Intel, I tried to install, and I still can't get the card wireless to tour consistantly on / off power after a reboot.  I thought for sure the nuclear option could solve the problem now I can't even go back to Windows 7.  I did mention to try some recommended drivers Intel, I found in other posts... I also tried to uninstall the driver, and install in compatibility mode, but that has not worked, either.
  
  This one had me scratching my head.  I tried literally everything I can find on the internet in an attempt to solve the problem, and nothing will keep the work of consistantly wireless NETWORK card.  Any other ideas out there?
  
  Looking at the forums, appears not to have a lot of people in all areas of this issue with different brands of computers and network interface cards.  If anyone knows anything else to try, I would really appreciate it.

  FIXED!

  I think so.  I downloaded and installed the bios for Windows 8.  After that, I managed shutdown and booted my laptop 3 times and restarted once.  Every time you start after the installation of the firmware BIOs, the card automatically turned on and connected to my SSID NETWORK.  Since the upgrade to Windows 10 I saw not the laptop automatically start and connect the wireless NETWORK card and he did successfully 4 times now.
  
  The file that I downloaded from the HP Web site was update the BIOs for Windows 8 version F.2D rev A.  The file name is sp68425.  I will continue to monitor and make sure that it was indeed the fix, but all great so far.

  For people who can run on the same topic, here's a recap of what I did to solve my problem:

  Centrino 2230 installed 15.18.0.1 driver
  Update driver Bluetooth 10.0.10586.0

  Updated the BIOS to the version of Windows 8 F.2D Rev A
  
  If you decide to play with the BIOs firmware, just be aware that if things go well, you could cause more damage to your system.  I would only try this method if you are uncomfortable for the recovery of a faulty BIOS installation.

• Computer will not start after the installation of Windows Vista SP2

  
  After downloding and installing Windows Vista SP2 on ACER laptop for my daughter, I can no longer start the computer.  Initially registered startup C:\\Windows\System32\drivers\ecache.sys as corrupt file repair.  Change BIOS to boot first from the optical drive and the departure of computer with Vista DVD in the drive, I accepted the option repair.  No chance that the machine always fails to start and always displays the window "Statup repair."  Auto repair is always unsuccessful.  Repair suggestions will be appreciated.  Thank you.  Bob G.

  Support Microsoft still offers a FREE support for Vista SP2.  Go to: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1 where they will help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• ITunes will not open after installation on own windows.

  Hello good people. I'm having a problem with iTunes. First, I installed my card motherboard and CPU to 970 MSI gaming and AMD FX6300 respectively. Secondly, I tried solving this problem on and off for 12 hours now. I did, step by step, everything included on this page of troubleshooting problems with iTunes for Windows updates .  I even went as far as the PCFixit of use to install each individual program. I also tried uninstalling everything and using the version "for older video cards. 570 GeForce gtx if it matters.

  In addition, Quicktime is not installed with the installer, so this isn't the issue. I even went so far as QuickTime installation, repair and try again, still without success. I don't also get MSI error. I tried disabling my firewall completely, and I currently have no installed antivirus program.

  The installation seems to be just fine, everything seems to be in its place, but when I double click the Itunes, or run as admin, I get the small circle of loading for 1-2 seconds and nothing. If I look at the Task Manager, itunes.exe appears under process for about 2 seconds and then disappears. If I shift-ctrl-click, I get a popup window that says that itunes is running in safe mode, but if I click on one of the options, he runs away and disappears.

  All advice is appreciated. I actually upgraded my mobo and CPU because I've had problems before with my computer does not recognize is not my phone, tablet or anything in any apple product. Same thing for the iphone 4, 5, 6 and ipad mini 3. Now, my computer has no problems with recognition of the device, but I can't seem to install iTunes to do something with it.

  (OS is Windows 7 Ultimate)

  Thanks in advance,

  Cam

  Have you tried to delete all the software apple - itunes, quicktime, ischedule, ipoint, etc., and then reinstall only those you need?

• HP C7280 solutions Center will not work after the upgrade to Windows 7

  I was running Vista and connected the C7280 wired and wireless. The last month or so has been wireless without any problem.

  I've upgraded to Windows 7, reinstalled the driver I had, and now when I try to scan I get an error that says: "an unsupported operation was attempted" which appears twice, then I get an error that says "an invalid argument has been detected.

  A window pop up gives then a few measures to try to resolve the problem.

  I downloaded and installed the driver PS_AIO_02_Net_Full_Win_WW_130_140.exe which did not work.

  I deleted the printer of the material then uninstalled the Software Solution Center

  Driver package driver re-installed PS_AIO_02_Net_Full_Win_WW_130_140.exe C7200 and

  dot4patch_reboot.exe installed,

  Stop the printer, it unplugged for a few minutes, restarted the computer, and

  the same errors.

  The driver is a year old, and I can't find a newer version.

  Exit the:		2009-10-20
  Version:		13.1.0

  The patch is the latest of a few months, but it did not help either. " Print Patch HP software when upgrading from Vista to Windows 7

  2009-12-06, version 1.0, 1.22 M

  This Windows 7 fix corrects some of the features of the printer after upgrading Vista to Windows 7. For networked printers, go to www.hp.com for more support information.

  Any help is appreciated.

  Finally, you have this problem fixed. With the support of HP no.

  I installed the software for a HP Photosmart Premium C410 series and it fixes some problems I had with the HP Solution Center, analyses the problems in the C7280 printing software.

  Go figure...

• Sony Xperia z3 Turned off and will not charge after being immersed for about 5 minutes

  As the subject says. My Xperia Z3 was submerged for about 5 minutes in less than a foot of water. He was in charge at first, then it started to vibrate. The model will thus: 1 (typical to indicate the load power) Vibration, then a Triple vibrator. At this point the LED on the phone turns off. Now he's going to restart this process again and again until the phone is disconnected. That submerged while the phone components were closed and did not open. As far as the damage is concerned, it is a crack in the root of the hair in the backglass and part of the bezel has started to peel off near the camera for unknown reasons. Once again this damage is very slight, and only someone who knows what the phone looks like new would see same. Any help would be apperciated.

  I'm sorry to see it, but you will need to contact your local care Xperia

  http://support.sonymobile.com/global-en/contactus/

  Request a trial of vacuum.

  The crack may be the cause of the water damage.

• Vista will not boot after installed updates

  After installation of .net Framework 3.5 Service Pack 1 for .net Framework Assistant updates. 1.0x86 (KB963707) and Windows Vista (KB968389) to my Dell XPS M1330 laptop, my computer did an automatic stop down. I couldn't restart my computer correctly after this {2nd time this has happened}. I restarted my time 1st comp by selecting the command prompt and the 2nd time by catering to last known position. I did all as usual by pressing F8, F12, F2, diagnostic test, memory test and a little more. Right now I'm running, but I'm going to be scared to do another update when the time comes. Can someone help me please on this issue. Many thanks in advance, Ron

  Hello

  1. keep good backups of your data using redundant methods.

  ------------------------------------------------------

  2. it is very possible that updates do not install correctly are the symptoms of the real problems
  and not the real cause of their.

  ------------------------------------------------------

  3 set updates download but you can install them - and you can install them one at a time if necessary.

  Control Panel - Windows Updates - left settings.

  and run it to restore updates

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  ------------------------------------------------------

  4 do these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------

  5. record how to remove updates if necessary:

  Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

  Or

  Remove an update
  http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

  Or

  The problems with the removal of updates
  http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
  Or

  How to uninstall updates in Windows Vista
  http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

  Disable or hide optional updates on Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Streaming videos will not play after loading

  Hi guys. So I have this problem.
  When I play a video, I've waited a long time to load. When I come back to play, I can't click any part of the video, whether it's the game, the button full screen or any part of the video. Basically, he's wasting all my time waiting in a continuous stream given that I can't play the video at all.

  Videos YouTube are very good. All other videos have this problem. I have to remove the cookies, cache images and download history to fix, but it's a solution temporary because after watching my first video (after the removal of cache and cookies) successfully, it goes back to the same problem. I can't click any part of the video stream.

  I tried Googling, but I can't find the right keyword. I had this problem for 2 days. My version of flash player is the most recent: 15.0.0.189? (if I'm not mistaken).

  I also tried to play a video in incognito mode, but it's always the same problem (if the information is useful).

  I don't know if it's really a flash problem, but it could be one of the culprits.

  Someone knows how to fix this? Please help, it's very frustrating.

  Go to the Control Panel, programs and features and remove Adobe flash player. Now try to play a video as default player by windows.

• Satellite L30-101 will not boot after memory expansion

  Hello

  We have a Toshiba Satellite L30-101 with 512 MB memory

  We also bought 2 X 1 GB-compatible modules to extend the memory to its max.

  When we installed the two new modules the laptop won't boot.

  We tried to install one at the time and both work individually. I also tried 1 X 512 MB
  and 1 X 1 GB, which also worked.

  It seems that we are not the only one with this problem!

  1.5 works much better on le.5 but it doesn't seem to be a shame to have the autres.5 but its unusable!

  regards db

  Post edited by: db133

  I think that you have incompatible modules for mode dual channel.
  What RAM do you have?

  A module is maybe corrupted and so he doesn t run in mode dual channel.

  You can check the module with a program like Memtest86: [www.memtest86.org]

• Satellite L30-105 will not boot after memory expansion

  Hello

  I have a Toshiba Satellite L30-105, with 1 GB of memory (2 X 512 MB modules).
  I bought 2 X 1 GB-compatible modules to extend the memory to its max.

  When I install the two new modules the laptop won't boot. I tried to install one at the time and both work individually. I also tried 1 X 512 MB
  and 1 X 1 GB, which also worked.

  Help I have updated the bios but still can not computing for work with 2 GB of memory?

  Thank you
  Rebmark

  I am also interested what compatible modules you use.

  Just FYI: your laptop model can handle with 2 GB RAM and compatible module - 1 GB DDR2-400/533 (PA3411U-1M1G).

• Laptop will not boot after Dell logo.

  Yesterday, I tried to start my Dell Inspiron 17 laptop. I bought about three years ago and have not had any problems start to date. When I press the power button, the Dell logo appears and then nothing happens. I removed the battery and held the power button down until delete static. I also tried F2, SATA has changed, but that has not worked. Then I tried to run the diagnostics, but I got a black screen. How can I fix this, or is something broken?

  There's your answer - the hard drive is bad (the boot sequence hangs on the black screen because it can not find the bootstrap on the drive to continue.

  Reinstall the drive (you will need a new, 2.5 "SATA laptop drive - hard drive, drive hybrid or disk solid state drive) that is 9.5 mm or thinner) and reload the OS (from the recovery media if all goes well, you did when you received the system) and you'll be all set.

• Driver for Officejet 4500 Wireless all-in-one will not install after the upgrade to Windows 8.1

  Upgrade to Windows 8.1 on Pavilion g6.  OfficeJet 4500 Wireless all-in-one still print but not scan.  Downloaded driver full features.  Installation quit giving the error message "file not found".  Tried the 'chat' with no resolution sessions

  Thanks for the reply.  HP has called since then and was finally able to install the driver.