configuration password

Similar Questions

• What is the "User Configuration" password that is requested after the update?

  OSX makes an update last night (I'm on 10.11.3) and after it reboot it asked me password "User Configuration", see picture below. I am aware that you can just restart workaround - but as we have seen repeatedly in our office now, we would like to know exactly why it's happening.

  Can anyone confirm that this is a bug?

  

  Just press Command + Option + command + DELETE keys and it will switch to full name of user and password.

• Install Configuration password

  During my initial installation of 14 elements on my Mac after serial number window, he goes to an 'Options' window, I select the program and click "install". A small window pops up saying "Setup wants to make changes. Type your password to allow this. "He already has the username with my name, I type my password and the box just shakes. I changed my password twice and double checked with the paper in the original to make sure that my info is correct and it is until I get to this window. Also, I tried to replace my name in the username field with my email which is what is used in the initial configuration, but still just a fragile window. Help before I throw this computer out the window.

  It's your application operating system your COMPUTER password to prove that you have permission to install

• Laptop won't let a connection account. There is no configuration password.

  THE MESSAGE "UNABLE TO LOAD THE USER PROFILE".

  * original title - OUR PORTABLE LEAVE MY HUSBAND LOG IN TO HIS ACCOUNT. HE DIDN'T THERE WAS NO PASSWORD ON HIS ACCOUNT... ANY ONE OUT THERE GOT ADVICE? *

  Hi JMHNI,

  Please see the following article some troubleshooting on this particular error you receive:

  http://support.Microsoft.com/kb/947215

  I hope this helps!

• Z5 WiFi hotspot configuration password not accepted by my Tablet

  My Samsung Tablet does not accept the password of my new Z5 during the process of setting up WiFi hotspot.

  Tablet without problem with old phone used as access point.

  Z5 no problem connecting to WiFi at home.

  best regards and thank you

  Everything is ok now.

  The phone has decided to present the "Show password" box, which was not there before.

  Thank you for your patience.

  concerning

• Configuration password hibernation problems

  Original title: Hibernation Pasword

  I have a Compaq Persario laptop and I cannot set a password for when I put my laptop computer to the Hibernate. I wanted to know what steps must I take to solve this problem?

  Thank you

  Hi antwon wood,

  1. what issues are facing everything by creating a password?
  2 - is Windows not and will prompt you to enter the password after the wake up the computer after hibernation?

  We recommend that you provide us with more details on the issue, so that we can better help you. At the same time have a look at the following articles for more information about the hibernation.
  1. see How to activate put in hibernation on my Windows Vista-based computer?
  2. see How do I change the password requirement when my computer wakes from sleep?

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can RV082 password lost, I get my backup configuration file.

  I forgot my rv082 of admin password, but I have a backup configuration. password can be decoded to him?

  Thanks for any help!

  No one really knows what information is in the backup file. In general, are stored passwords that do not need to be transferred elsewhere encrypted and cannot be decrypted. Most likely, you need to reset your router to the factory settings. But you can try asking your question in the support community Cisco Small Business for routers. The RV082 is now part of Cisco Small Business and there is few people Cisco who can check with the developers...

• Reset password on behalf of "vmware" Orchestrator Configuration for a device

  Today I've updated our Orchestrator device to the latest version to correct the error of the bash shell.  Before I did I connected to the device using accounts to the root and vmware (root used for vmware and web site of the device used to connect to the web site configuration) - both worked so I don't know I got the correct password before the update.

  After the update and restart, root always works with the initial password I had set, but vmware account no longer works.  I tried the original on the box password (vmware/vmware) and the password that I know worked before the upgrade - no work.  I found a lot of posts, how to reset the password when running with a host Windows Orchestrator - but not the device.  Does anyone know how to reset it when you use it?

  Also - is this a known issue?  Updated unit horks the configuration password?

  Thank you

  NK

  Then, try another browser. He has had problems with IE.

  Joerg

• Disable the password in the iPhone device.

  Hello world.

  Today my device (iPhone 6s + iOS 9.3.2) asks password for configuration when I was trying to receive mail from Microsoft exchange.

  I have device configuration password and now I can't use "Pass off the coast of password" option (located in the settings/Touch ID and password). This option is disabled now.

  Is there is no way to disable using password?

  Thank you in advance.

  Is your email exchange with your employers?  If so, you will need to delete this email account to remove the safety profile which is the application of these configuration changes. An employer who offers a generally exchange e-mail account leads to a policy of safety and certification when you configure the account that will change some security settings in your phone to enforce the policy of the company with the use of their e-mail account on a mobile device.

• How is my AirPort Extreme from of unauthorized configuration?

  I've set up my AirPort Extreme, she seems to have a good solid connection. I used my iPhone and AirPort to utility in place. Now I wonder, what keeps other users in the configuration? I only put in place a network password, not a configuration password. Anyone who knows my network password and have AirPort Utility on their iPhone arrive to my network?

  If you have not set up a password of The Base Station , then anyone on your wireless network with AirPort Utility will have access to the configuration of your AirPort Extreme settings.

  Now may be a good time to add a password for the Base Station if you have not already done this.

  Tap on the AirPort Utility open on your iPhone

  Press the image of AirPort Extreme

  Tap on edit

  Tap Base Station

  Enter a password you want to use as a password for the Base Station or device

  Check the password again

  Tap done

  Tap done again

  Press update if prompted

• Satellite L40-19 - need directions to the game of password BIOS, editing, deleting

  Dear forum,

  On-line and paper manual for my Satelite L40 - Toshiba 19 c mention the possibility to use passwords of the BIOS Setup, but retains how set, change, or remove. (BIOS FRIEND... CRESTLINE - TOS...) On its website, society seems to stifle as well on this issue.
  L40 - 19 c. utility "Toshiba Assist" does not offer a Posibility to work on BIOS.

  I tried to put the password by intuition, and it worked. Weeks later, I tried to remove it: I entered the old password and left the field for the new blank password. This is the procedure to remove a password from the BIOS Setup.
  The next time you start upward, however, the BIOS asked a password. No password worked: the old one not just ENTER - nothing.

  Thus, obscuring a vital function of a product, my laptop unusable Toshiba. If I had not been able to remove the contents of the CMOS BIOS (Yes, it is possible without paid service), I can have condemned legally responsible society.
  There are explicit laws on insufficient documentation in Germany.

  I like to use the password of the BIOS for obvious reasons of security and certainly like to Toshiba to spare embarrassment to return my money for the clumsy documentation.

  I greatly prefer to receive correct, complete and understandable documentation by Toshiba on how to use all functions of the product, including all functions of BIOS setup password. And of course I like to see - for the benefit of all users of this forum L40 - source download for the manual posted here. Moreover, a responsible statement would do, which is a Toshiba official statement published in this forum.

  Thank you much in advance.
  ContributorJW

  Hey Buddy

  First of all I wonder about your statements you last post sounds a bit more aggressive and I don t know what you mean by professional Seraphim. To my knowledge that you will be served in this forum only common Toshiba laptop users who are trying to help other users of Toshiba laptops
  In any case

  > The point is rather on how to modify and delete a password by the legitimate function of BIOS configuration password.

  The BIOS password (if it s known to you) can be removed easily
  Access the BIOS using the BIOS password then you have to put the old BIOS password, overwrite it with entry empty (pressing enter) then you need to confirm this second time pressing enter) and then you save the changes you made
  This is the procedure more simple that is known to me

  If this does not work, then you put a bad BIOS (maybe typo) or there is something wrong with the BIOS feature.
  In this case ONLY the ASP can help you

  I hope I could help a little...

• I tried veriface, now the laptop wants a password.

  Hello.

  I tried veriface on my G570, but found it annoying so I uninstalled. Now when I turn on the laptop it asks a password to the start screen. This laptop was sent to Lenovo to repair a few months ago, where they have reinstalled windows 7 and made me a default generic user WITH NO PASSWORD account.

  1. press ESC or enter to logon screen does not work.

  2. I can't in the security modes as he always asks this non-existent password.

  3. I tried to reset to the last known good configuration does not work.

  4 try to repair the windows installation asks for the password.

  5. I tried, configure passwords in BIOS, does not work.

  Any help please?

  When you played with veriface, he asked you to type a password.

  you remember how it was?

  everything you typed in veriface is your new Windows password.
  VeriFace has changed.

• Photosmart HP 7520: How to reset the web password PhotoSmart 7520? I tried resteore factory

  Why is this information so hard to find online? I ran through the forums, and all I see are people send each other private messages.

  I put a password for several months ago and I want to go back in but I'm always be prompted to enter a password. What in the world is already the default password?

  Hello @altjx,

  I understand that you want to reset the administrator password that you set on your printer. I would like to help you today to restore the configuration password.

  Please check your private Messages to get instructions on how to reset programming on your HP all-in-one Photosmart 7520.

  Once you have completed the setting to zero, please post the result of zeroing in this thread and not in the private Message.

  I look forward to hear from you!

• Is there an API to change the device password policy?

  As we know, the BES IT policy, we could configure password policy such as:

  1 history of max password

  2. password max attempt

  3 password expire

  4. minimum length of password

  etc...

  I did some research on the internet and I saw no API to get the Java application. I just want to confirm with experts here.

  Thank you.

  That's right, that there is no API for this.

• ASA5510 and the encryption password

  Hello

  In the configuration of an ASA5510 firewall file, the password is encrypted.

  You know the type of encryption is used?

  Thanks for your help.

  Best regards

  Configured passwords that match the locally configured user accounts are hashed using an owner hash algorithm.  The ASA then stores these hash values in the configuration file instead of the plain text values. When you put your password the hash is calculated again and checked history one stored.

  I hope it helps.

  PK