Disable the password in the iPhone device.

Similar Questions

• Windows XP does not recognize the iPhone - device not recognized error

  I am running Windows XP (SP2 I believe) and whenever I plug in my iPhone I get the error not recognized USB device. If iTunes does not recognize it and I can't sync. My guess is that I'm missing or have an updated driver, but I don't know how to install. If it makes a difference, I am using a brand new MacBook Pro and Windows XP via Parallels Desktop. I don't think it's the question, though, as I used to be able to sync with my Manager (ACT!) contacts via Outlook. It seems to be simply a function of Windows is not able to identify the iPhone via USB. A simple solution would be appreciated, but I'll take complicated if that's all that's available.

  Hello abogadopeter,

  Thank you for visiting the Microsoft answers community.

  This question has been a known issue that seems by Parallels. I did some research and read through some of the threads for workarounds. He doesn't seem to be a conclusive solution, but works to some extent. You can take a look at http://forum.parallels.com/search.php and simply search for ipod and look through some of these institutions.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• black screen (on the iPad device) and the white screen of white (on the iPhone device)

  What is the problem?

  I publish the app (Air SDK version 20.0.0.233, compiled in Flash CC) in Itunes Connect and I get the message:

  ---------------------------------------------------

  We discovered one or more bugs in your application when reviewed on iPad and iPhone iOS 9.2.1 running on networks cellular and Wi - Fi.

  More precisely, we were still not able to use the app, a black screen is empty (on iPad device) and white screen of white (on iPhone device) appear indefinitely after the launch of the app.

  Next steps

  Please run your application on a device to identify the issues, and then to review and submit your control application.

  If we misunderstood the intended behavior of your application, please reply to this message in the resolution Center to provide information on how these features have been designed to work.

  For new apps, uninstall all previous versions of your application from a device, then install and follow the steps to reproduce the problem. For updates, install the new version as an update to the previous version, then follow the steps to reproduce the problem (s).

  Resources

  If you have difficulties to reproduce a problem report, please try to test the workflow described in Technical Q & A QA1764: how to reproduce the bugs found compared to observations of the App Store .

  If you have any questions at the level of the code after using the resources above, you can check with Apple Developer technical support . When the DTS engineer follows upward with you, be prepared to provide:

  -all the details of your rejection problem (s)

  -screenshots

  -steps to reproduce the problem (s)

  - symbolicated crash logs -If the result of your question in a crash log

  -------------------------------------------

  Compiling on Mac OS to solve the problem

• Installation of construction LabVIEW application disables the Windows Device Manager? Help on how to diagnose the problem?

  Please can anyone shed light on this, or suggest where to look?

  I built an application using the Application Builder of LV2014 (32 bit).

  On a Win7 X 64 PC at work, it installs and runs ok.

  On Win7 X 64 PC at the customer, it installs ok, but then after Windows restarts on demand 'device manager' no longer works and there are some unchangeable registry entries associated with nipalu. The client runs Symantec security software. A client COMPUTER technician is suggesting that LabVIEW is interacting with device drivers and this is the origin of the problem, but we do not know how to go further. It is not really acceptable to deploy computers where the Windows Device Manager no longer works. Surprisingly, the application itself works always - it's just Windows which messed up.

  Thank you

  Thanks for the suggestions. The company IT guy has not been able to talk to a person in NI UK support (no one was available), but he managed to keep it down to a problem with Dell Data Protection encryption Enterprise Edition. Delete first, then install the LabVIEW application, then reinsert DDPE gave a system where everything worked.

  We have built apps that used progressively more labview drivers (vision, labview base; digital i/o)

• How can I disable the iPhone 6?

  Depending on the medium to turn off an iPhone 6, the only option listed is the user to contact the previous owner of the phone in order to enter the Apple ID and password to remove their account. Well what happens if the former owner died? The technical support provided information * because all possible support options are not listed to disable iPhone 6 so that it can be used by a new user!

  If the previous is dead so please bring the phone and the death certificate and proof of your right to have the (if possible as a testament) phone to an Apple store and proof of your identity, and they can help you

• The iphone needs to cool down before using the flash? How to fix?

  The iphone needs to cool down before using the flash? How to fix?

  Try to close the application or restart the phone camera. See ol-down-before-you-can-use-the-flash/ http://leimobile.com/ios-4-3-camera-bug-flash-is-disabled-the-iphone-needs-to-co.

  TT2

• How to disable the touchpad in windows 8 - Pavilion g6

  How to disable the touchpad in windows 8 - Pavilion g6

  Welcome to the forum, Sally.

  There are several ways to do this - method you choose may depend on what you need to accomplish.

  Follow a few ideas.

  • A double tap farm in the upper left corner of the touch pad if it off for a single session.

  Enable / disable

  Control Panel > display icon > mouse > Settings of TouchPad > click on "enable TouchPad.

  They continue parameters to install and configure the TouchPad as you like it...

  ==========================================================================

  A method that works with the pilots 'old', it is a failure of session by session...

  Make sure this setting is ON / CHECKED:

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  () repeat) TouchPad settings (button) > click tapping >

  Click the shimmering blue wheel

  In "box to Disable TouchPad settings".

  CHECK "Double Tap to activate / disable the TouchPad.

  In the 'Action in the upper left'

  CHECK "Disable the TouchPad during a session.

  Close

  Ok

  
  NOTE that, if it is available on your version, you can select to "turn off the TouchPad" - that's fine, unless something goes wrong.  You could get stuck without your USB mouse AND no way to return to the setting to activate the touchpad.  I don't know if I would use this setting.

  ======================================================================================

  Next...
  Latest drivers (V16.x) have the ability to disable the TouchPad / click on the keypad with a setting on the main page 'Settings' when a USB mouse is used.  This is a very nice feature.

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  CHECK "disable the pointing device internal when the external USB pointing device is attached.

  If you want to be alerted and see a visual cue of disability >

  TICK "Animated icon in the taskbar" >

  and make sure you have your updated task bar notifications so you can see the view of the mouse.

  

  =====================================================

  I hope this helps!

• How to disable the touchpad on Probook 4525 s permanently?

  How to disable the touchpad on Probook 4525 s permanently?  Can I uninstall the driver in Control Panel, but the next time, he is back on again once.  I use a usb mouse and touchpad is simply in the way when I type.

  Damy salvation!

  There are a few options depending on your OS and your version of TouchPad.

  • The best option, if it should be available for you is:

  New drivers (at least the V16.x) have the ability to disable the TouchPad / click on the keypad with a setting on the main page 'Settings' when a USB mouse is used.  This is a very nice feature.

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  CHECK "disable the pointing device internal when the external USB pointing device is attached.

  If you want to be alerted and see a visual cue of disability >

  TICK "Animated icon in the taskbar" >

  and make sure you have your updated task bar notifications so you can see the view of the mouse.

  

  =====================================================

  Here's a 16.2.X TouchPad driver for the ProBook series - it can run on your laptop:

  sp58647 Synpatics V.16.2.10.12

  =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

  Another method that may work with a driver older if the best option isn't available:

  Control Panel > display icon > mice > TouchPad [ClickPad] settings >

  () repeat) TouchPad settings (button) > click tapping >

  Click the shimmering blue wheel

  In "box to Disable TouchPad settings".

  CHECK "Double Tap to activate / disable the TouchPad.

  In the 'Action in the upper left'

  CHECK "Turn off the TouchPad.

  Close

  Ok

  
  NOTE if this alternative is available, it is very well, unless something goes wrong.  You could get stuck without your USB mouse AND no way to return to the setting to activate the touchpad.  I don't know if I would use this setting.

  ===================================================================================

  I hope this helps!

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

  my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?

  Hello

  Follow the instructions here:

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• "The service cannot be started, either because it is disabled or it has no active device is associated."-message I get what anyone who use only request password

  I had problems with my computer and trying to understand what was going on... I changed file permissions and how some

  the services are started.  Now I can't do anything. ..... This allows for standard user password. Now he is not even asking me password more. It just does nothing. Same thing if I try to run as administrator, nothing happens now. Even when I'm with a Director profile I can't do anything that would require only a password before.
            
  I get this message instead: "could not start the service, either because it is disabled or it has no enabled devices associated."
  I'm locked out can do whatever it is administrative. If anyone could offer any suggestions, I would really appreciate this has been driving me crazy.
  
  Thank you, Scott.

  Hi Scott,.

  1. is it impossible to run any program?

  2 - is the only message you receive?

  3. which files do you have change permissions?

  4. remember the services for which you have made changes?

  5. what questions initially face?

  This problem may occur if the service is disabled. To resolve this issue, try the following.

  Method 1: Search for services.

  a. click Start type services.msc and press ENTER.

  b. double-click the service that is not started.

  c. click the log .

  d. check that the service has not been disabled.

  e. click on the general tab, verify that the service has not been disabled in the Startup Type box. If Yes, click Automatic to start when you start the computer.

  Method 2: Perform a system restore if you have made any changes recently. Refer to the following.

  What is system restore?

  System Restore: frequently asked questions

• BlackBerry smartphones can not disable the device password!

  I was playing with my Storm the weekend and decided to apply a password to the device. Now I can't turn it off and I hate that I am constantly asked for her. When I go to 'Options', then 'password' it has not the ability to disable the password feature. The toggle button at the top of the password page is soft gray with a tiny tiny red lock next to her and I can't click on the button. The only thing I can do is to change the password. Any suggestions? !!

  I solved my problem. I did a reset of the handset and that got rid of the option activate the password. However, when I did a backup of subsequent restoration of the handset, I was careful to choose only what I wanted really saved (address book, calendar, etc.). If oyu make a full backup that you will get the active password once you restore again.

• I forgot my password of restriction for the iPhone

  My mother wants to enter restrictions and change it for 17 + apps, but she forgot the password please help!

  Hello

  That your mother forgot restriction code, you'll need to erase your iPhone and then configure as new to remove or change the restriction password.

  There is no way around this feature.

  If you have a backup of your iPhone that was made before the Restrictions were turned on, you can then restore from that backup.

  More information:

  Restrictions of use on your iPhone, iPad and iPod touch - Apple Support

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• Is this common practice to disable the password during repair?

  My iphone screen 6 of s is cracked and I booked the genius bar yesterday to arrange the repair.

  The genie asked me to disable "Find my iphone" for repair. I understand this point of view and do.

  Then, he asked me to turn off the password too. Is this normal? I don't want to reinstall all applications after repair so I do not clear my iPhone, so I feel extremely dangerous for this practice.

  Does anyone have a similar experience?

  Thank you

  Here is what Apple has said about it:

  Until you get the service for your iPhone

  Your content is important, and you will need the backup to restore your iPhone after the service. Apple could remove the content on your iPhone during the service process, that you bring to your carrier, take it to an Apple Store or post.

  Before putting in your iPhone, save it
  Before you send in your iPhone, follow these steps

  If your iPhone has a SIM, remove and keep your accessories and adapters - do not send them with your iPhone.

  Once you receive your replacement or repair iPhone, transfer your SIM to the iPhone and turn it on. You can configure it as you would for a new iPhone or restore your content from your backup.

  copied from answer Service Center - iPhone

  Before putting in your device

  Follow these steps before entrusting your device to an Apple Store, carrier or Apple authorized service provider. If your device turns on or answer, complete the steps as much as possible:

  1. Back up your device.
  2. Have your Apple ID password . For repairs, you will need password your Apple ID to erase your device and turn off Find My iPhone.
  3. Bring your invoice if possible, in the event that your service requires a proof of purchase.
  4. Bring your camera and accessories that you need help.
  5. If you haven't already done so, call to check if you need an appointment before go you to a service outlet. For example, planning a Genius Bar reservation before going to the Apple Store.

  

  Before sending your device

  Do the following before sending your device in repair or replacement. If it not turn on or respond, complete the steps as much as possible:

  1. Backup of your device.
  2. Tap Settings > Messages. Turn off iMessage.
  3. Erase your device: tap Settings > General > reset > erase all content and settings. If requested, enter your access code and password Apple ID.
  4. Make sure that the locking Activation is disabled.
  5. Remove the SIM card, case, or your device screen protector and keep your cable and charger.

  Now, your device is ready to send. If you have arranged a service request, you should have received instructions on how to mail in your device. If you do not have instructions or if you have not set up a repair request, contact The Apple support.

• Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I've tried everything

  Anyone know how to solve my problem? I can't import my photos from Iphone to computer. Sign says: Photos in the camera cannot be imported because the IPhone is locked with a password or read. My phone is unlocked. I tried everything, every single idea. Without success! Any other idea?

  For example, you specify that the device does not display the lock screen, correct? Do you use Touch IDS? If so, try to put your finger on the device to see if it's what he wants.

  See you soon,.

  GB