Configuration problem with the ReadyNAS Ultra 2 Plus OS 6.2.4

Similar Questions

• problems with the HP Photosmart Plus b210a Wireless

  Good evening. I have some problems with the HP Photosmart Plus b210a. Precisely after printing when the printer is not detected on the network and is defined as "not available". The works remain in the queue and the printer is turned on and on again unable to work in print queue.
  The printer on the network report says "Success" for each element

  It is the same for the iPhone 4 and iPad 2

  The system is composed of:

  MacBook Pro 13 "with OSX 10.6 update now
  Connected to the Internet router Wavewgate Digicom3G150 with key
  HP Photosmart B210 Pro Aio series with ultimate drivers Apple

  Network:
  D4 HW (MAC) address: 85...
  192 168 123 102 (non-static) IP address
  DHCP configuration
  Authentication: WPA - PSK
  Encryption: Auto (AES / TKIP)

  The same system also use a PC with Windows Seven Home, but in this case, the printer works PERFECTLY! Even with the iPhone and iPad!

  Thank you for the help that you can give me

  OK, I will assume that the connection of the printer to the router and the router are OK for 3 other devices work correctly.

  Make sure that your OS X is healthy:

  1. download and install OS X Combo Update.
  2. download and install the printer drivers HP from Apple.

  After that, you can reset the printing system once more.

• Satellite U300-13U - iTunes has detected a problem with the audio configuration

  Please can someone help me? I have a laptop U300-13U and that you have installed iTunes on it. However, when I open iTunes I get an error message saying 'iTunes has detected a problem with the audio configuration and may not play correctly' which is an understatement - it does not at all!

  I uninstalled, reinstalled iTunes and Quicktime, but in vain. I have searched and exhausted the iTunes support boards but have nowhere either. The sound is fine as I can read CDs with no problems at all. The only suggestion I can get is that there may be a problem with the audio device magnet is not Apple and vice versa.

  Does anyone have AN idea at all as to what might be going on here? I'm completely out of my depth, I'm just a simple girl who wants to play his music!

  Thank you so much.

  Hello

  I don t use iTunes so I m not an expert player but first of all, you must give us some important information:
  -What operating system do you use?
  -Are you using the factory settings (Toshiba Recovery disk) or your own version of Windows
  -Do you have the yellow exclamation marks in Device Manager?

  OK, iTunes says that there is an audio configuration problem so do you trying to update the audio driver? If this isn't the case, you should try it.
  See the Web from Toshiba site for an update and see what happens. Then validate your result:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Welcome them

• launch of checkers problems: error: trying to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall.

  Windows Vista can not launch problem of checkers: try to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall. Please check your firewall settings by visiting the Open Ports FAQ.

  Original title: launch of the problems of checkers:

  Hello

  If you have not yet tried to disable the antivirus/firewall software, then try the following steps to disable them.

  Disable the anti-virus software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software

  Enable or disable Windows Firewall: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off

  IMPORTANT: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• There might be a problem with the configuration of your DOMAIN NAME SERVER

  Last week one, I noticed some problems with my internet connection. I have a BSNL broadband connection. I am connected to the internet, and after some time all of a sudden, I'm not able to connect. My modem lights are all on and on my laptop, I see the symbol of 2 computers with a note on it, which means that I'm connected. But still the pages not displayed. When I run Network Diagnostics (I Windown Vista) I get the error message saying: "there could be a problem with the configuration of your DOMAIN NAME server. I turned off the computer and the modem and switch it on after a long time... He would return but loses the connection with the same error message again. What can I do? I tried to reset the modem, also tried the system restore. What can I do? Please help me. I have laptop Dell Insipiron with Windows Vista and I connect wireless.

  We do not know how your system should be set up - including the DNS configuration and settings.  I recommend you contact your ISP's technical support group and get help from them in the configuration of your computer (and test lines and modem - the problem could be the modem and not on the computer or it could even be the service provider itself).  It can be something as simple as a typo or a box checked or not checked - I do not know because I do not know their settings (different for each access provider).  Give them a call.  I do so often when I have connection problems, and they are almost always useful, or schedule a service call if they cannot help.  I think it's your best chance to solve this problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• problem with the configuration of the channel of width 40 mhz on Aironet 1141

  Hello

  recently we bought the model cisco aironet AIR-AP1141N-E-K9 stand alone.  After you have configured it, customer has no problem with the connection and the cover, but there is problem with passage. clients are unable to connect to higher rates, even if I set the width of the channel to 40 mhz, the maximum for compatible client device N rate is 54 mb. 

  can someone give me some advice how to fix this?

  This is my setup, or see attachment file

  http://pastebin.com/1WHeSvmq

     

  Thank you very much

  Please change the encryption used by AES.

  Here's more information: http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a0080a3443f.shtml

  THX //art

• What is the problem with the BizTalk configuration tool?

  I just installed BizTalk Server 2010 (developer edition) and I restarted my computer, but the Configuration tool will not charge. Instead of loading the configuration tool, a dialog box displays saying "another instance of this program is already running" with the title saying "error". I am sure that no other instances of the configuration tool are already running. What's not here? If anyone can help me, that would be greatly appreciated.

  Hi NateKoepke,

   
  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are facing problems with the installation of BizTalk Server 2010. Please correct me that I misunderstood.
   
  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.
  http://social.msdn.Microsoft.com/forums/en-us/biztalkgeneral/threads/

• problem with the configuration of the Windows on Windows 8 updates

  hated, I an asus X553M I think its name everything was fine but but now ever time I'll start up it goes to black screen (lack of configuration of windows, undo changes updates off your computer), then it will reboot, but it just back upward with the failure to set up the screen and it continues to is time and time again iv tried everything I have photos on the laptop that are too important to lose is there a way I could get him...

  Original title: help

  Hello

  Thanks for posting your query in Microsoft Community.

  I suggest you to start from the installation media and then Auto repair and check if it helps.

  Method 1: create installation media.

  Check out the following link to create an installation media for Windows 8.

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  Method 2:

  Step 1: auto repair

  See the next procedure to start on the installation media and auto repair

  1. Insert media such as (DVD or USB key) and press the F12 key and click change default or any other option located at the bottom of the screen.

  2. In the next screen, click on the Troubleshooting option, you WinRE (Windows Recovery Environment) different options to solve the problems with the computer when it is in no State to start is displayed.

  3. Now click on repair automatic, this will open a wizard that automatically diagnose and repair problems with starting the computer.

  Step 2: System Restore

  See the next procedure to start on the installation media and perform the system restore.

  1. Insert media such as (DVD or USB key) and press the F12 key and click change default or any other option located at the bottom of the screen.

  2. In the next screen, click on troubleshooting option, allows you to display different options of WinRE (Windows Recovery Environment) to solve the problems with the computer when it is in no State to start.

  3. Now, click on the system restore, this will open a wizard that automatically diagnose and repair problems with starting the computer.

  Hope this helps, please let us know if you have further questions about Windows.

  Thank you.

• SE "There are problems with the configuration of static files in your environment" after the APEX 5 install using Oracle HTTP Server

  There is not much information in the doc around the new configuration of static file.  Someone at - it an example of this dads.conf he file should look similar to static files?  Everything else seems to work fine - it's my only hang up now.

  Thank you!

  Exact pop-up message:

  There are problems with the configuration of static files in your environment.  Please see the section "Configuration static file Support" in the Guide of the Installation Application Express

  I figured it out on my own - the doc has a section "6.5.4 configuration Support for static file" which basically said yes, it is now supported for static files, then a "see also:" link to the dads.conf section, that I'm not good enough to see there are now 2 new parameters in your dads config file...  All is ready!  It works!  YAY!

• I bought for the Adobe Master Costume CS5.5 product packaging a few years back and today I get the following message appears: "Configuration Error: there was a problem with the license of this product." You restart the computer and restart production

  I bought the Adobe Master Costume CS5.5 product packaging a few years back and today I get the following message appears: "Configuration Error: there was a problem with the license of this product." You restart the computer, and restart the product. Error 213:19 ".

  That was before Adobe moved to a payment structure based on participants. I need to be able to access these programs. Please provide a solution to the problem.

  order to C:\ProgramData\Adobe & C:\ProgramData\Adobe\SLStore folders full reapply administrators property back on the C:\ProgramData folder and then add everyone.

• I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

  I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

  Please contact the original publisher of the widget.

  Thank you

  Sanjit

• Problems with the configuration of the Essbase Server

  Hi all
  
  -J' have a simple environment with a single Foundation Server with only the Foundation services running on it (only the basic components installed). On the same Essbase server, I installed (by default) foundation and Essbase components.
  -I am facing a problem with the configuration of the Essbase server. All steps complete with the exception of the last step: deploying web applications (APS and EAS) to the WebLogic Server.
  -FYI, I am deploying the web application to the existing domain created on the server of the Foundation. As all products must be on the same domain.
  
  
  During deployment, the WebLogic administration server reports the following error:
  
  BEA-149003
  Cannot access source application information in /opt/shared/apps/hyperion/Oracle/Middleware/EPMSystem11R1/products/Essbase/eas/server/AppServer/InstallableApps/Common/aps.ear for application "APS".
  The specified error is: there is no file of the application.
  
  
  Now the path and the above files exist on the Essbase server, but not on the server of the Foundation. So after playing with the WL administration console and reading of Sandeep post [1], I came to the conclusion that:
  1. the Essabase components must be installed on the Essbase server, but not configured.
  Now, this means that I need to install all the components on the server of the Foundation, even though I only will use to deploy the services of the Foundation which seems a little ridiculous?
  2. create a new domain on the Essbase server, so the EAS/APS will be deployed on the Essbase server - but will not be on the same domain as the other products.
  
  Well, I am a newbie with WebLogic and so would welcome your valuable contributions!
  
  
  Thanks in advance...
  
  
  References:
  [1]. http://sandeepseshan.blogspot.in/2009/02/weblogic-server-10-deployment-error.html

  The configuration documentation.
  "On the computer on which you will administer the WebLogic Server, you must install all of the Web applications for all applications that you plan to deploy on any machine in the environment. (The Administration WebLogic Server is installed and deployed on computer Services Foundation) »

  You should should not create a new domain for deployment on other servers and can use the existing and only to deploy web applications on the servers that you want running on.

  I don't know what version you install, but if it's 11.1.2.1 then consider the OS is similar on both machines
  "All Web applications in a deployment of EPM system must be deployed on windows computers or on all UNIX machines."

  There do not appear to be there in 11.1.2.2 so I guess it isn't the rule more.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Siri having problems with the connection.

  Hello

  I have an iPhone 6 Plus, 64 GB with IOS version 9.3.3 (G 13, 34) and the carrier is Vodafone.

  I have problems with Siri, feel when I asked her a task (research or appeal), after a few seconds of waiting, the answer is always "sorry, I have a problem with the connection. Please try again in a moment. »

  I have the right connection with Internet with WIFI and 4G data stream.

  I did reset network settinjg, but I don't see any improvement.

  Please indicate what I can do and if it's a common problem with the iphone 6.

  Thank you!

  CC

  After the reset of the iPhone ("home" button and close button for 10 seconds, with the iPhone connected to the computer), Siri works!

  I am concern I have to do this reset every 2-3 weeks if I need services of Siri...

  Good luck to all of you who have the same problems with their iPhone of hares!

  CC

• NO - problem with the service

  I am from INDIA.

  I bought an iPhone 6 s new mobile Hong Kong a licensed salesperson (mobile fortress).

  When I bring to the India and put on my country sim (vodafone) to my laptop, everything works, but the network does not connect.

  "In settings > about I see vodafone, but when I see the carrier" is not connected, I tried many solutions online.

  I tried:

  1. all parameters (network... so on) and the software is up to date.

  2 tried selecting the network, but to the carrier, it does not show the available network.

  3. I tried the complete reset of the phone 2-3 times.

  4. I tried to change the apple ID.

  I tried many things, my phone works, but could not solve the network. Cannot make calls or find networks in my I phone.

  Someone can help me. When I went to ask local sales assistance, that's the problem with the change in the country, and they said that it will be free of charge on 18000INR.

  Please someone help me.

  Thanks in advance.

  Hi a.a,.

  Welcome to the communities of Apple Support! I'm sorry to hear that you experience these symptoms with your new iPhone 6 s. I'm a bit ambiguous on your specific configuration or what you see, but you can check that the phone is not locked on the original support (if the phone was sold to any kind of discounts or subsidized rate, it is most likely locked carrier). You can find the information described in the following article useful:

  How to unlock your iPhone for use with another carrier - Apple Support

  You may also be aware that different iPhone models are sold in different regions and countries and can support only specific carriers in these regions, as shown here:

  iPhone - country view with LTE - Apple networks support

  Concerning

• Problem with the main screen of firefox

  After the update of firefox to firefox 15.0 16.0.2's problem with the main screen. At the top of the main screen displays the bar (caption bar of the main form) that I have win xp and under this title is bar legend like win 7.

  Firefox is running on Windows Xp, if better, I can send the screen, but I don't know where is possible add image to this error report...

  Okay, the problem has been resolved, problem was with the Tab Mix Plus extension. I have an older version of this extension, because at work may not update directly, because I'm going to the Internet via a proxy. Download, update firefox extension directly through the proxy is not possible... I need to download via the other internet browser, in order to not do it often...