Configuration system services

I have a large number of services in the Configuration of the system that are stopped.  As authentication protocol Extensible Application Layer Gateway Service, the Application ID, as well as many others.  Is it a problem are these services stop if necessary?

It's normal. They will start when necessary.

If they all were running even when no no need it would be an unnecessary load on the system.

Tags: Windows

Similar Questions

  • use of iPhone time data system Services and location

    Since last month, data use under Services system-> time and place has increased "substantially." It's pretty evenly half my data use, whatever I do. I have not added new applications or use the phone differently I have in the previous months.

    I use a tracking, human application, but even if I turn off mobile data for her and use of data in the time and the place continues to be half of my mobile data.

    How can I start troubleshooting? I have read the discussions here and off mobile data and background update and synchronization for most things. This has reduced the use of the data, of course, but the time and the place continues to be half of my data.

    I'm on a 1 GB plan, that was a lot, now I close out maxxing when I don't care.

    Hi branches,

    Thanks for checking out the Apple Support and communities for the detailed information of what is happening with your data in time and place. I can understand wanting to make sure that you are able to easily manage your usage data and wanting to know which application is causing this additional use.

    Since you have already completed these steps, I recommend you to disable the location Services for all of your applications, and then turning them back on one or two at a time, as needed, to help determine what applications likely to use your location. You can disable the location for applications and services system with these steps.

    Enable or disable location Services. Go to settings > privacy > location Services. You can turn it off for some or for all applications and services. If you disable location Services, you are prompted to activate again the next time, that a service or application attempts to use it.

    Disable the location Services for system services. Several system services, such as the calibration of the compass with geolocation of ads, using location Services. To see their status, activate them or disable, or display the location Services icon in the status bar when these services use your location, go to settings > privacy > location Services > System Services.

    You can find the steps listed above in the iPhone user guide.

    Privacy - iPhone

    You can also find additional information about the parameters of your privacy and location in this article.

    On privacy and location-based Services - Apple Support

    See you soon!

  • C850-119 - Win 8 accidents - satellite system service exception

    Can someone help me - I have a new laptop Satellite C850-119 with Windows 8 and suddenly, after a month my PC crashes and I get a note - your met Pc problem and this problem due to your PC restart.
    He also says: System service exception,.

    What's wrong?

    Any help would be much appreciated!

    Hello

    Not quite sure if it s just a problem of software, so as a first step, you should check if its software related problem

    Please see this FAQ from Toshiba:
    + Windows 8 recovery & Repair +.
    http://APS2.toshiba-tro.de/KB0/TSB2A03ES0000R01.htm

    You can try to repair the system and if that doesn't do it, get it back to factory settings.

  • HDD Protection System Service disabled

    Toshiba PC Health Monitor - HDD Protection System Service is disabled, how can I activate

    Reinstall them but before you remove the previous class and restart the round. should work...

  • I can't install it last update for itunes on my pc. When I try and download it and it's over, he said, "Apple mobile device service couldn't start. Check that you have sufficient privileges to start system services. »

    I already tried uninstalling and reinstalling several times and that does not work, I simply get the same result.

    I start to download, through all the steps and when it is ready to be finished install it says in a pop-up, "Apple mobile device service couldn't start. Check that you have sufficient privileges to start system services. »

    Right-click on the downloaded installer and use run as administrator.

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • system service exception blue screen

    With the help of a connected USB GPIB adapter 2015 LabView, NI Max worm. 15 and the NI 2 488. Replace the old system. New system with the same versions of software installed causes a BSOD when run us our program or "scan" for devices the BSOD looks as follows.

    System Service exception

    ni488k.sys

    0 x 00000033 (0x00000000C0000005) FFFFF8800A44702E

    any ideas?

    Tried several different things but ultimatlely I think I have all the updates from Windows update has solved the problem.

  • results of system service

    my computer is only 3 months and within the 2nd week, I had a system service exception screen how can I fix this problem?

    Hello

    If your computer is only 3 months old and you have / had a problem in the second week, contact the manufacturer.

    It should be under warranty and you can get them to repair or replace.

    See you soon.

  • I get the diagnosis "Windows Media PLayer cannot play video DVDs. You may need to adjust the display settings of Windows ", etc. But I can also not help & Support 'because a system service is not running.

    The problem may be something that I deleted, but I can't go in the system restore back to an earlier time

    Hello

    1 have had any changes made on the computer before the show?

    2. what operating system is installed on the computer?

    3. when exactly you get the error message?

    4 are. what system service you referring? What is the full and exact error message?

    5. what happens when you try to do a system restore?

    See the link and check if it helps:

    Windows Media Player Error Message help

    http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5268&ID=C00D116A&ContextId=83&OriginalID=C00D116A

    If the problem is not resolved, please provide more information to help you best.

  • on xp family. Windows cannot open help and support because a system service is not ongoing enforcement.

    Windows cannot open help and support because a system service is not ongoing enforcement. to resolve this problem, start the service called help and support

    lhthomas,

    Welcome to the Microsoft Answers community.

    In doing research, I found this article in which people have found a solution:

    Help and support-Service not started

    I hope this helps.

    Lisa
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • When you try to install Windows Defender I get an error message "Service"Windows Defender"(WINDEFEND) could start. Make sure you have sufficient privileges to start system services.

    Original title: could not start the Service "Windows Defender" (WINDEFEND)

    When you try to install Windows Defender, I get an error message that

    "Service"Windows Defender"(WINDEFEND) was able to start. Make sure you have sufficient privileges to start system services.

    How can I check which privileges I have and I need?

    I noticed in the management of the tasks that Norton symlcsvc.exe ran and I was wondering if it was who collide with the Defender, so I temporarily stopped Symantec process running in the field of Services, but still had the same result, try to run the installation of the Defender.

    Help please

    Hello

    This error message is because you have Norton installed on the computer. See the for more information section below.
    http://www.Symantec.com/business/support/index?page=content&ID=TECH103119&locale=en_US

    Let's try the steps and check them off below if it helps.

    Step 1: You can try to uninstall Norton and then check if the problem persists.
    Note: Reinstall Norton after verification.
    Reference: http://support.microsoft.com/kb/307895

    Step 2: Change the registry value and check.

    a. Click Start, type regedit.exe and press ENTER.
    b. navigate to the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender\
    c. right-click on DisableAntiSpyware, on the right panel, then selectEdit.
    d. enter 0, under value data, and click on the OK button.
    e. close the registry editor.
    f. restart the computer.

    Registry warning:
    Important
    this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • "My external hard drive does not appear in Windows Explorer and cannot open 'Help and Support', an error message" Windows cannot open help and Support because a system service is not ongoing.

    Original title:

    Everything was fine until yesterday. Juice now, when I plugged the external HD into the USB port it does not appear in the 'my computer' window. It is recognized by the computer as it is present on the list of the "Disk Clean Up" and it also appears when I click on ' Safe Remove Hardware ' on the taskbar. But if she does not appear in the 'my computer' window I can't work with it or don't even know what it I have arquived in it.

    Trying to find a solution, I realized that same 'information system' to 'System tools' is also not available. Pops up a window saying that "Windows cannot open help and Support because a system service is not ongoing enforcement. " To resolve this problem, start the service named help and Support '. OK, I tried to open 'Help and Support' ' Start Menu ' and the same window appeared again to "not have a system service that runs". I don't know what her soul precisely and I have not the slightest idea of what I need to do to correct this 'disappearance' of Service 'system '. There is nothing without the appearance of HD in the window of thw work? Everything else works fine and the calculation is virus-free. What should I do?

    Hello

    You did changes to the computer, before the show?

    Solution A:

    For the problem with the external drive not appearing is not in Windows Explorer, see the following methods.

    Method 1:

    Check out the following link.

    A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

    http://support.Microsoft.com/kb/925196

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 how to back up and restore the registry in Windows

    Method 2:

    Connect the external hard drive on another USB port and check.

    Solution B:

    For the problem with the help and Support, check if the service is enabled.

    a. click Start, click run. In the Open box, type services.msc and press ENTER.

    b. right-click on the service called Help and Support , and then select Properties.

    c. under the general tab, set the type Startup to Automatic and click Start.

    d. close the services window and check for the issue.

  • My Windows XP home has lost, it is the function of help when I go to help & Support it says a system service is not running and then said go to the Support & Help! ?? Catch 22. Thank you, Dennis Australia

    When I go to help & support it says a system service is not running and then said go to support &! ??
    Catch 22.
    Thank you, Dennis
    Australia

    Go to: Control Panel, administrative tools, Services, double click on help and Support.

    Startup type: automatic

    Service status: click on start, click on apply, click OK

  • I can't open windows help and support. I get a message saying "windows cannot open help and support because a system service is running, to resolve this problem, start the service named help and support.

    How can I open help and support, I get a message telling me that I can't open it, as a system service runs not to solve the problem open help and support!

    How can I open help and support, I get a message telling me that I can't open it, as a system service runs not to solve the problem open help and support!

    Long time since I used XP but I seem to remember that if you do start - run msconfig [back] in my view, there are Services tab there where you can change the aid stopped service to start.

    If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

  • Hello services did not start, check the sufficient privileges to start system services

    I have a Dell desktop computer - over 6 years running windows xp. I've been using itunes for several years, update without problem until a couple of months ago when I got this error "Hello services could not start, check the sufficient privileges to start system services. I tried to delete everything from itunes etc following the instructions from apple forum - but still get the error. I tried to restart Hello in the service of my computer menu - but now it doesn't show even Hello - I have tried to load Hello - same error... help - I don't want no Hello == I just need the latest version of itunes - now I have nothing. !

    Hello the long beach of dl,

    You need not run Hello service to have iTunes on your computer.

    You can look in the event viewer and see if there are errors on iTunes or the Hello Service.
    By default, the Hello service is started and the startup type is set to automatic.
    The path to the executable file is: C:\Program Files\Bonjour\mDNSResponder.exe. You can search and find this file?

    I find a 3rd party software removal tool and then have it remove all traces of iTunes, including the Bonjour service.
    Use the control panel to uninstall iTunes and software components in the following order:

    1. iTunes
    2. QuickTime
    3. Apple Software Update
    4. Apple Mobile Device Support
    5. Hello
    6. Application of Apple Support (iTunes 9 or later)

    Download the latest version of iTunes for Windows, and then try to install again.

    I hope this helps.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • I can not open help and support on my computer beause a system service is not running

    I tried to search, but fine, I could not open as system service is missing

    You can look at http://support.microsoft.com/kb/888018 to see if it applies to your situation, but be careful.  Editing the registry can be very dangerous, please make a backup of your registry before making a pass at her.

    For more information on how to backup/restore the XP registry, please visit:

    http://support.Microsoft.com/kb/322756

    Caution:

    Absolutely no warranty express or implied is delivered with this post.  The poster will be held not responsible for any physical, mental, emotional, or financial loss resulting from the use of suggestions or information contained in this message.  Entities who follow the advice in this post are at their own risk.

Maybe you are looking for