Configure SMTP vCenter Operations Manager for Horizon view

Similar Questions

• Installation vCenter Operations Manager for Horizon view adapter

  Hello

  If I want to install the Operations Manager vCenter for Horizon view adapter, I get a Message "confirm the update - vcenter operations manager can not go back to the previous installation state.»

  Backup appliance virtual vCenter OM before applying the update... »

  Is that normal and I can say 'OK' or made, I made a mistake in the Installation with the EGGS?

  Thank you!

  

  
  

  Hello

  I solved it... I was scared, but ok and next... it works great!

  Novell1

• API for vCenter Operations Manager

  Is there an API published for interaction with vCenter Operations Manager?  The tool generates wonderful data sets, and it would be extremely useful to publish these data on a customer portal for the presentation.  Is this possible now or is on the roadmap?  Any help is appreciated.

  There are:

  https://vcopsip/HttpPostAdapter/ OpenAPIServlet

  If you hit it with a simple browser, it gives you documentation.

• vCenter Operations Manager 5.7 is now available

  vCenter Operations Manager 5.7 is now available

  https://my.VMware.com/Web/VMware/info/slug/infrastructure_operations_management/vmware_vcenter_operations_management_suite/5_7

  https://www.VMware.com/support/vcops/doc/vcops-57-vApp-release-notes.html

  What's new:

  More flexibility with capacity planning

  • Capacity Assess risk and plan of distribution and effective demand: define your varied business needs-based strategies to assess the risk of the capacity, efficiency and forecasts. For example, different pads, too commit thresholds of alert, schedules, reports, etc., in production and test-dev environments.
  • New views for Cluster capacity risk: identify quickly via color view of risk of ability to Cluster clusters grouped by commercial criteria, etc., are threatened by ability - right size faces a deficit of capacity now or in the near future, or all simply not.  Down for each cluster in Cluster mode risk detail to analyze what resource is forced on and why.
  • New common environments and workloads policies: new policies of out-of-the-box, such as the Production and Test-Dev strategies, enable a quick installation of the capability settings of Operations Manager to vCenter for types of common environments. Additional new out-of-the-box policies, such as batch workload, interactive workload and political to ignore the virtual machines, help to refine the ability of law with precision settings dimensions and analyze different workloads based on their performance characteristics.

  Improved self-monitoring

  This version introduces new diagnostic measures to monitor the health and availability of the components of Operations Manager vCenter, such as analytical, collector, Active MQ, Web server, database, and operating system.

  Widgets with flexibility and ease of use

  • Health Tree Widget: facilitate the visualization for a large number of objects.
  • Generic Widget Scoreboard: graphics support Sparkline, metrics channel and filtering by resource settings.
  • Metric Sparkline Widget: configurable color ranges and units, are supported for the type of resource and the label.
  • The resource widget: customizable to add parameters beyond health.
  • Top-N analysis Widget: support to the analysis based on the most recent values.

  New personalized relationship Widget

  To create a view hierarchy and the relationship of custom resource, like the current view out-of-the-box vCenter server.

  Great custom user interface to import and export of edge changes and indicators

  • Changed export of binary (.bin) format in XML (.xml): synchro .bin file formats are still supported for backward compatibility.
  • DBCLI improvements: programmatically import and export Super Metrics.
  • Pre-population of the dashboard during import objects.

  Balanced profile Metrics

  This version introduces a new metric profile that signals a small set of parameters. Increase the scalability of vCenter Operations Manager to support more resources by changing the metric profile in the new "Balanced" profile in vCenter operations Manager Administration.

  VMware vCenter Navigator Infrastructure-filtering capacity

  You can configure display it resources discovered by vCenter Infrastructure Navigator in vCenter Operations Manager. This version introduced a feature of configurable Infrastructure Navigator vCenter adapter filtering to control the service and Application reporting of Application resources. For each resource type, you can set up a "black list" or "whiteList" filtering in the filterList.txtconfiguration file.

  • black list: the Infrastructure Navigator vCenter adapter ignores the specified entries. If a name of Service Application or an Application name is included in the "black list", it is not reported by the adapter to Infrastructure Navigator vCenter. It is the default setting. The Infrastructure Navigator vCenter adapter filters unknown names of default Application services.
  • white list: Infrastructure Navigator vCenter adapter reports only the specified entries. If there are no entries added to the white list mode, none of the resources of the resource type matching appear.

  New browser support

  This version adds the new support for the following browsers: Apple Safari version 6, 24 and 25, the versions of Google Chrome and Mozilla Firefox 18 and 19.

  Strengthening security

  This version includes the additional security and increases compliance with the directives of the Defense Information Systems Agency (DISA) and the technical Guides (STIG) implementation of security.

  In addition to the groups in vSphere UI are now supported all the properties of the adapter for VMware-based rules.

  Hope this will be useful.

  Thank you

  Alex D.

• Where the vCenter Operations Manager Enterprise 5.0 download

  Hello

  Not sure if the site confused me or is it just me? I'm looking to download vCenter Operations Manager Enterprise 5.0 as it is called on the Installation and the Configuration Guide.

  What I find is VMware vCenter 5.0.2 enterprise operations. Is this the same thing, not enough Manager in there? I think that my 5.0 license will work with 5.0.2 but why is it not the same name? I'm looking for even for good download? So so very well, otherwise where the devil is she lol

  https://my.VMware.com/group/VMware/info?slug=infrastructure_operations_management/vmware_vcenter_operations/5_0

  Thank you for your help... Jim

  Hi Jim, looking to the correct download.

• How to remove vCenter Operations Manager to the extent of consumption?

  Hello

  I imported data from metering 3.3.2 to 3.4. Collection fails:

  'No info extension Operations Manager for xxx.xxx.xxx.xxx vCenter we didn't took a vCenter Server.

  There was a vCops a long time ago, but it has been uninstalled for a long time according to the removal instructions (VMware KB2036389) including the defection of the extension.

  Manage / products a buttons only rebuild and change to vCops, but how can I remove vCops to operate the data collection?

  Note: You mentioned that you had already registered vCOPs/vROPs with vCenter. If this is the case, then you can skip step 1.

  Here are the steps that I followed which allowed me to delete a previously docommissioned vCOPs/vROPs vCLUM server.

  1. make sure that the server vCOPs/vROPs is more entered with vCenter

  • You can check it out and remove manually by following the instructions in this KB article - VMware KB: remove or disable the plug-ins from vCenter Server and vCenter Server Appliance
  • The plugin you are looking for is: com.vmware.vcops

  2. in the portal web vCLUM, click Manage in the top right

  3. make sure that the products tab is selected

  4. click on the checkbox Show inactive

  5. click on the button delete next to the vCenter your old server vCOPs/vROPs was previously attached (you will get a prompt saying that it will not remove the vCenter if he he already asked for data)

  6. Finally, click Activate next to the vCenter.

  I hope this helps!

• Help to configure content vRealize Pack of Operations Manager for paper Insight

  I am running the following:

  vrops Version 6.0.1.2523163

  Log insight Version 2.5.0 - 2629935

  I installed the v1.0 vROps 6.x content pack in Insight Journal and used this article very useful when configuring the liagent.ini file

  vRealize content Operations Manager Pack for newspaper Insight - VMware Blogs

  Everything seemed to go well, but the end result is no data of vrops Li and connection errors in the newspapers of the agent without clear indication of why it is not agent connection.

  Viewing the log file, I see a lot of counters indicating the date, the agent of time shows that he has worked for a few days now with more 8 million observed events.

  However, interrupted events number matches the 8 million observed number of events which means that everything has been ignored "due to the overflow of local storage or rejected by the server" as stated in the article.

  2015-08-23 17:07:16.704273 0x00007f770ffff700 < path > CFApiTransport:348 | Re-login to the server vrops.domain.local:9000

  2015-08-23 17:07:16.762633 0x00007f770ffff700 < error > CurlConnection:482 | Transport CurlConnection::Config error: could not connect to the server

  2015-08-23 17:07:16.762664 0x00007f770ffff700 < path > CFApiTransport:328 | DoConnectJob [deferred by 167 dry connection]

  Agent of the time 134:15:34.106000

  Events observed: 8 176 438 (total number of events saw the newspaper sources since the Agent started or changed server)

  The events collected: 0 (= fall the observed)

  Events sent: 0 (delivered to the destination server)

  Events ignored: 8 176 438 (abandoned due to overflow of local storage or rejected by the server)

  Mailing frequency: 0.00 EPS (average of the last minute)

  DB file size: 143,576,064 bytes

  CPU usage: 0% (in the last 900 seconds average)

  Link: cfapi://vrops.domain.local:9000

  Host name (FQDN full): vrops.domain.local

  Opportunity of free space: 191,429,376 bytes

  Two things, I thought maybe to blame that I don't know how to fix:

  1. vmw_vr_ops_hostname = IP address? same as address of node? My cluster shows the node address as the IP address rather than a FULL domain name. I tried to provide as well in the ini file, but doesn't seem to help, but I find it weird that I don't see the name domain FULL configuration section that I linked to suggested that I should. And what is listed here would be that I filled in the ini file to vmw_vr_ops_hostname file?
  2. In vrops, under Administration > Support > newspapers > change the Logger Configuration > export to Syslog, no matter how many times I uncheck the box 'exit of syslog server logs' external and click ok the box remains checked off the coast. I'm sure that this must be unchecked, but even if it were problems, as I understand it, it would be especially causing duplicate rather logs that prevent all newspapers to appear as is my case.

  According to this article it is said: "If export syslog is configured then the required configuration of the specific agent is not set and the syslog Protocol is used instead of the cfapi." It is also very important to note that configurations can and will be replaced! By example, if you configure the agent works with the content pack (for example. liagent.ini) client-side and later someone configure syslog export from the user interface, the configuration of the client-side agent are crushed with the parameters of the interface user break the integration of content package. »

  vRealize content Operations Manager Pack for newspaper Insight - SFlanders.net

  Given that syslog export was apparently when I first tried to set this up, it would make sense that this is what causes problems, but how could I then set? Especially when the user interface won't let not disable me export syslog on vrops?

  Any help is appreciated. Thank you

  Very useful - I think that the problem is with the [server] section if your configuration. What is the host name = value? It can be solved? The reconnecting log messages are expected that the delayed connection makes it sound like the configuration of the host name does not.

• vCenter Operations Manager doesn't show any new virtual machines added

  Hi all

  I have a 5.5U2 of vSphere environment coupled with Operations Manager 5.8.4 vCenter in this environment, I have a strange behavior as new created virtual machines are not directly shown in the tree view of the infrastructure. Sometimes they raise within the hour, sometimes, others may need several days to appear.

  If I want an immediate reflection of VMS in vCenter, I have the best "Workaround", I tried to restart the services Operations Manager vCenter virtual machine of the user interface.

  All components are registered in DNS names, I checked that all entries are correct, that is the case. And they can be solved.

  Operations Manager vCenter is secured by a member of MS internal CA of an Active Directory domain.

  After "googleing"I've seen a similar question on hosts that are not visible, but not the VMs."

  Some of you have already experienced this kind of questions?

  Thanks for your comments,

  Michael

  As reported by the VMware support, it's normal behavior with this version of vCOPS. Switch to the 6.x version to solve the problem.

• Updated VMware vCenter Operations Manager tools

  Hello everyone, I just use Citrix Xenserver to VMware vCenter with Operations Manager 5.8.4.  I've looked everywhere and cannot find an answer to this.  Is it possible to update VMware tools in the vCOPS TIME?  I just started my new environment with v8 of Veeam backup and he lets know me that VMware tools are outdated.  The only reason why I ask because, coming from Citrix Xenserver v6.2, whenever a device from the virtual computer is provided by Citrix, you're stuck with the tools provided in this unit until they update the device.

  If it's good to update the VMware tools, it's as simple as opening the console to each virtual machine in the vApp and he tell the ' Install/Upgrade Vmware Tools?  Or is there a more complicated step?

  Thank you

  Brett

  As far as I KNOW, the VMware tools upgrade is not recommended on vCops.

  This breaks the device and you can ignore the message of the VMware tools obsolete.

• What is vCenter Operations Manager collector?

  
  Hi all

  Can someone explain what that how Manager vcops collector helps reduce bandwidth constraints. Also where can I download the exe for what can be installed on remote servers windows/Linux.

  Thanks in advance.

  Collectors really come into play when. 1. you have a large scale environment and a unique collector on the default TIME must be divided or distributed due to the load on the solution.  2. you have firewall restrictions and cannot communicate directly from vCOps to the data source. More likely to security, you get poking a hole in the firewall vC Ops. Accordingly, it is not a popular option and not done is special circumstances.

  For the bandwidth needs, it will depend on what adapter you use for data collection. Some adapter query/retrieve more data than is actually used/imported by vC Ops because of filters/blocking/configurations. Some cards also have configurations of amount of threads and the size of the pad/acceleration of data collection applications. The answer is, "it depends." As is well situations, depends on your size environment, latencies, and configuration.

• How necessary is a graphics card for Horizon view?

  I wonder how important it really is to a graphics card help with graphics using Horizon. None of my clients will use intensive graphics, such as games or CAD software. That said, the experience will be good as an experience of laptop to customers, with no particular graphic but things are ok in all?

  This is not necessary unless you have specific needs for 3D applications and 3D rendering.

  Even without and GPU:s, you can provide features basic coated CPU software with 3D.

  Linjo

• No vCenter information Operations Manager of an extension of the "intellectual property" has been collected in a vCenter Server

  Hello

  I just started with a clean install of the vCloud 3.4 meter use.

  The first two collections is fine but now it is defective for vCenter Operations Manager.

  We are still using the operations manager, so it is not necessary to be removed doe to use count see the version of vCOPS (5.8.4.2199700.

  

  Get the following mail:
  Object:

  Hour meter collection usage, errors

  Body:

  Metering: start time (IP): 2015-11-04 12:00

  Duration: 9 seconds

  No vCenter info Operations Manager extension for "vCOPS IP" was taken to a vCenter Server.

  .

  Hi all

  Has had a call with VMware Support and the development of consumption measuring team. This is a bug in version 3.4, and there is a solution for this.

  The workaround is to use the user SSO ([email protected]) to connect to vCenter Server to the extent of consumption.

  Concerning

  Jean

• Operations Manager 5.8 vCenter. is now available

  Operations Manager 5.8 vCenter. is now available for download
  

  
  

  GA Date: December 16, 2013

  GA Build #: VAPP - 1448123 #

  Highlights of the new features and improvements:

  Query execution optimized to improve performance on the scale.

  Authentication options with the new integration with active directory for authentication.

  Improved security with improvements to environmental OS and DURATION.

  Extended integration

  New integration with VMware vCenter Insight Log using a happy vCenter Pack Operations Manager that allows to monitor your infrastructure Operations Manager of vCenter.

  Integration with vCenter Hyperic using the Management Operations of VirtualCenter vCenter Hyperic Pack has expanded. This management pack provides several new features, such as:

  Support for the servers of Microsoft Hyper-V, including on the dashboards of box for troubleshooting and performance analysis.

  Support for Microsoft Exchange and SQL servers, with on the dashboards of box for troubleshooting.

  Several new management packs are available for download. Check the market for Cloud Management Solution VMware exchange for more details: https://solutionexchange.vmware.com/store/vcops.

  For a complete list of all changes and fixes, please see the release notes:

  • VMware vCenter Operations Manager 5.8 release notes

  Note: Please read the release notes before upgrading.   There are a few caveats this time due to additional hardening security

  upward

• Operations Manager 6.1 5.5 Web client on vSphere link refer to the IP address instead of the FULL domain name

  Hello

  We have a new environment vROps 6.1. Everything works like a charm, except when I get the Web Client vSphere. Hosts and Clusters - monitor - health, I try to click on the "see details in vCenter Operations Manager" and I get sent to the IP address to one of the nodes in the cluster vROps. This translates into a certificate error. We have signed all the certificates for the solution of vROps, but that doesn't help us when the link refers to one IP address. Any way to change the behavior of the link to go instead of the full domain name?

  Thanks in advance for your comments.

  Concerning

  Atle

  Yes, here is a code snippet PowerCLI to do:

  to connect-viserver

  $extMgr = get-view ExtensionManager

  $vRops = $extMgr.ExtensionList |? {$_.key - eq "com.vmware.vcops"}

  $vRops.Server [0]. URL = "https://vrops-fqdn/vcops-ngc.zip".

  $ExtExtendedProductInfo = new-Object VMware.Vim.ExtExtendedProductInfo

  $ExtSolutionManagerInfo = new-Object VMware.Vim.ExtSolutionManagerInfo

  $vRops.ExtendedProductInfo = $ExtExtendedProductInfo

  $vRops.SolutionManagerInfo = $ExtSolutionManagerInfo

  $extMgr.UpdateExtension ($vRops)

  AK

• vRealize Operations Manager vSphere Client Web plugin does not work!

  Hi guys, I'm updating my environment Operations Manager vRealize and after that, I do not see the Web Client vSphere health status information. I followed the Migration to vRealize Operations Manager 6.0 Tutorial available in VMware Youtube channel and after change my TIME on the new server vRealize Operations Manager 6.0 Operations Manager 5.8 vCenter vCenter Operations Manager always direct plugin to my old Operations Manager vCenter VAPP environment.

  Error message:

  Unable to connect to the server vCenter operations. Check your network connection and the execution state of the virtual machines in the vCenter Operations Manager VAPP.

  Anyone know how to change the vCenter Operations Manager plugin to my new environment?

  Look at the screenshots to understand my problem.

  Thank you buddy. In fact, I had to do to solve the problem, but I removed the previous configuration before. I had to open https:///mob, locate the old configuration of Operations Manager 5.8 vCenter in content, ExtensionManager and UnregisterExtesion "com.vmware.vcops". After that, I did the same way as you have said and done! Thanks for your help.