Configure the Cisco VPN client to pass through the VPN site-to-site (GUI)

Similar Questions

• How to add images to my table and how to configure the Web site? Help, please

  I do not understand how to configure the Web site and add images to a table and make hyperlinks.

  First, set the folder of your Local Site saying DW where to save the files on your local hard drive.  Go to Site > new Site.

  I think it is easier to start with a page layout predefined by using one of the appropriate templates to bootstrap that comes with DW.

  Go to file > new > (Starter models > models Bootstrap). Select one:

  • Bootstrap-Agency
  • Bootstrap-eCommerce
  • Bootstrap-Portfolio
  • Bootstrap-product
  • Bootstrap-real estate
  • Bootstrap-curriculum vitae

  Press the button create.

  For pictures, go to insert > Image. Select an image and save it in the folder of your local site.

  Nancy O.

• Another problem with the configuration of Cisco VPN Client access VPN Site2site

  We have a Cisco ASA 5505 at our CORP. branch I configured the VPN Site2Site to our COLO with a Juniper SRX220h, to another site works well, but when users access the home Cisco VPN client, they cannot ping or SSH through the Site2Site.  JTACS contacted and they said it is not on their end, so I tried to contact Cisco TAC, no support.  So here I am today, after for the 3 days (including Friday of last week) of searching the Internet for more than 6 hours per day and try different examples of other users. NO LUCK. The VPN client shows the route secure 10.1.0.0

  Sorry to post this, but I'm frustrated and boss breathing down my neck to complete it.

  CORP netowrk 192.168.1.0

  IP VPN 192.168.12.0 pool

  Colo 10.1.0.0 internal ip address

  Also, here's an example of my config ASA

  : Saved

  :

  ASA Version 8.2 (1)

  !

  hostname lwchsasa

  names of

  name 10.1.0.1 colo

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.1.1 255.255.255.0

  !

  interface Vlan2

  backup interface Vlan12

  nameif outside_pri

  security-level 0

  IP 64.20.30.170 255.255.255.248

  !

  interface Vlan12

  nameif backup

  security-level 0

  IP 173.165.159.241 255.255.255.248

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  switchport access vlan 12

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  passive FTP mode

  permit same-security-traffic inter-interface

  permit same-security-traffic intra-interface

  object-group network NY

  object-network 192.168.100.0 255.255.255.0

  BSRO-3387 tcp service object-group

  port-object eq 3387

  BSRO-3388 tcp service object-group

  port-object eq 3388

  BSRO-3389 tcp service object-group

  EQ port 3389 object

  object-group service tcp OpenAtrium

  port-object eq 8100

  object-group service Proxy tcp

  port-object eq 982

  VOIP10K - 20K udp service object-group

  10000 20000 object-port Beach

  the clientvpn object-group network

  object-network 192.168.12.0 255.255.255.0

  APEX-SSL tcp service object-group

  Description of Apex Dashboard Service

  port-object eq 8586

  object-group network CHS-Colo

  object-network 10.1.0.0 255.255.255.0

  the DM_INLINE_NETWORK_1 object-group network

  object-network 192.168.1.0 255.255.255.0

  host of the object-Network 64.20.30.170

  object-group service DM_INLINE_SERVICE_1

  the purpose of the ip service

  ICMP service object

  service-object icmp traceroute

  the purpose of the service tcp - udp eq www

  the tcp eq ftp service object

  the purpose of the tcp eq ftp service - data

  the eq sqlnet tcp service object

  EQ-ssh tcp service object

  the purpose of the service udp eq www

  the eq tftp udp service object

  object-group service DM_INLINE_SERVICE_2

  the purpose of the ip service

  ICMP service object

  EQ-ssh tcp service object

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 clientvpn object-group

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group NY

  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo

  inside_nat0_outbound list of allowed ip extended access any 192.168.12.0 255.255.255.0

  outside_pri_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group NY

  outside_pri_access_in list extended access permit tcp any interface outside_pri eq www

  outside_pri_access_in list extended access permit tcp any outside_pri eq https interface

  outside_pri_access_in list extended access permit tcp any interface outside_pri eq 8100

  outside_pri_access_in list extended access permit tcp any outside_pri eq idle ssh interface

  outside_pri_access_in list extended access permit icmp any any echo response

  outside_pri_access_in list extended access permit icmp any any source-quench

  outside_pri_access_in list extended access allow all unreachable icmp

  outside_pri_access_in list extended access permit icmp any one time exceed

  outside_pri_access_in list extended access permit tcp any 64.20.30.168 255.255.255.248 eq 8586

  levelwingVPN_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0

  levelwingVPN_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.255.0

  outside_pri_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo

  backup_nat0_outbound list extended access allowed object-group DM_INLINE_NETWORK_1 192.168.12.0 ip 255.255.255.0

  outside_pri_cryptomap_1 list extended access allow DM_INLINE_SERVICE_2 of object-group 192.168.1.0 255.255.255.0 10.1.0.0 255.255.255.0

  outside_19_cryptomap to access extended list ip 192.168.12.0 allow 255.255.255.0 10.1.0.0 255.255.255.0

  inside_nat0_outbound_1 to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo

  VPN-Corp-Colo extended access list permits object-group DM_INLINE_SERVICE_1 192.168.12.0 255.255.255.0 10.1.0.0 255.255.255.0

  Note to OUTSIDE-NAT0 NAT0 customer VPN remote site access-list

  OUTSIDE-NAT0 192.168.12.0 ip extended access list allow 255.255.255.0 10.1.0.0 255.255.255.0

  L2LVPN to access extended list ip 192.168.12.0 allow 255.255.255.0 10.1.0.0 255.255.255.0

  pager lines 24

  Enable logging

  debug logging in buffered memory

  exploitation forest asdm warnings

  record of the rate-limit unlimited level 4

  destination of exports flow inside 192.168.1.1 2055

  timeout-rate flow-export model 1

  Within 1500 MTU

  outside_pri MTU 1500

  backup of MTU 1500

  local pool LVCHSVPN 192.168.12.100 - 192.168.12.254 255.255.255.0 IP mask

  no failover

  ICMP unreachable rate-limit 100 burst-size 5

  ICMP allow any inside

  ICMP allow any outside_pri

  don't allow no asdm history

  ARP timeout 14400

  NAT-control

  interface of global (outside_pri) 1

  Global 1 interface (backup)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access

  NAT (inside) 1 0.0.0.0 0.0.0.0

  NAT (outside_pri) 0-list of access OUTSIDE-NAT0

  backup_nat0_outbound (backup) NAT 0 access list

  static TCP (inside outside_pri) interface https 192.168.1.45 https netmask 255.255.255.255 dns

  static TCP (inside outside_pri) interface 192.168.1.45 www www netmask 255.255.255.255 dns

  static TCP (inside outside_pri) interface 8586 192.168.1.45 8586 netmask 255.255.255.255 dns

  static (inside, inside) tcp interface 8100 192.168.1.45 8100 netmask 255.255.255.255 dns

  Access-group outside_pri_access_in in the outside_pri interface

  Route 0.0.0.0 outside_pri 0.0.0.0 64.20.30.169 1 track 1

  Backup route 0.0.0.0 0.0.0.0 173.165.159.246 254

  Timeout xlate 03:00

  Conn Timeout 0:00:00 half-closed 0:30:00 udp icmp from 01:00 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 01:00 uauth uauth absolute inactivity from 01:00

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  AAA authentication enable LOCAL console

  AAA authentication http LOCAL console

  the ssh LOCAL console AAA authentication

  http server enable 981

  http 192.168.1.0 255.255.255.0 inside

  http 0.0.0.0 0.0.0.0 outside_pri

  http 0.0.0.0 0.0.0.0 backup

  SNMP server group Authentication_Only v3 auth

  SNMP-server host inside 192.168.1.47 survey community lwmedia version 2 c

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Sysopt connection tcpmss 1200

  monitor SLA 123

  type echo protocol ipIcmpEcho 216.59.44.220 interface outside_pri

  Annex ALS life monitor 123 to always start-time now

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set esp-3des-sha1 esp-3des esp-sha-hmac

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  Crypto ipsec df - bit clear-df outside_pri

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  card crypto outside_pri_map 1 match address outside_pri_1_cryptomap

  card crypto outside_pri_map 1 set pfs

  peer set card crypto outside_pri_map 1 50.75.217.246

  card crypto outside_pri_map 1 set of transformation-ESP-AES-256-MD5

  card crypto outside_pri_map 2 match address outside_pri_cryptomap

  peer set card crypto outside_pri_map 2 216.59.44.220

  card crypto outside_pri_map 2 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  86400 seconds, duration of life card crypto outside_pri_map 2 set security-association

  card crypto outside_pri_map 3 match address outside_pri_cryptomap_1

  peer set card crypto outside_pri_map 3 216.59.44.220

  outside_pri_map crypto map 3 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_pri_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  card crypto outside_pri_map interface outside_pri

  crypto isakmp identity address

  ISAKMP crypto enable outside_pri

  crypto ISAKMP policy 5

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 10

  preshared authentication

  the Encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 30

  preshared authentication

  aes-256 encryption

  md5 hash

  Group 2

  life 86400

  crypto ISAKMP policy 50

  preshared authentication

  aes encryption

  md5 hash

  Group 2

  life 86400

  !

  track 1 rtr 123 accessibility

  Telnet timeout 5

  SSH 192.168.1.0 255.255.255.0 inside

  SSH timeout 5

  Console timeout 0

  management-access inside

  dhcpd auto_config outside_pri

  !

  dhcpd address 192.168.1.51 - 192.168.1.245 inside

  dhcpd dns 8.8.8.8 8.8.4.4 interface inside

  rental contract interface 86400 dhcpd inside

  dhcpd field LM inside interface

  dhcpd allow inside

  !

  a basic threat threat detection

  statistical threat detection port

  Statistical threat detection Protocol

  Statistics-list of access threat detection

  a statistical threat detection host number rate 2

  no statistical threat detection tcp-interception

  WebVPN

  port 980

  allow inside

  Select outside_pri

  enable SVC

  attributes of Group Policy DfltGrpPolicy

  VPN-idle-timeout no

  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

  internal GroupPolicy2 group strategy

  attributes of Group Policy GroupPolicy2

  Protocol-tunnel-VPN IPSec svc

  internal levelwingVPN group policy

  attributes of the strategy of group levelwingVPN

  Protocol-tunnel-VPN IPSec svc webvpn

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list levelwingVPN_splitTunnelAcl

  username password encrypted Z74.JN3DGMNlP0H2 privilege 0 aard

  aard attribute username

  VPN-group-policy levelwingVPN

  type of remote access service

  rcossentino 4UpCXRA6T2ysRRdE encrypted password username

  username rcossentino attributes

  VPN-group-policy levelwingVPN

  type of remote access service

  bcherok evwBWqKKwrlABAUp encrypted password username

  username bcherok attributes

  VPN-group-policy levelwingVPN

  type of remote access service

  rscott nIOnWcZCACUWjgaP encrypted password privilege 0 username

  rscott username attributes

  VPN-group-policy levelwingVPN

  sryan 47u/nJvfm6kprQDs password encrypted username

  sryan username attributes

  VPN-group-policy levelwingVPN

  type of nas-prompt service

  username, password cbruch a8R5NwL5Cz/LFzRm encrypted privilege 0

  username cbruch attributes

  VPN-group-policy levelwingVPN

  type of remote access service

  apellegrino yy2aM21dV/11h7fR password encrypted username

  username apellegrino attributes

  VPN-group-policy levelwingVPN

  type of remote access service

  username rtuttle encrypted password privilege 0 79ROD7fRw5C4.l5

  username rtuttle attributes

  VPN-group-policy levelwingVPN

  username privilege 15 encrypted password vJFHerTwBy8dRiyW levelwingadmin

  username password nbrothers Amjc/rm5PYhoysB5 encrypted privilege 0

  username nbrothers attributes

  VPN-group-policy levelwingVPN

  clong z.yb0Oc09oP3/mXV encrypted password username

  clong attributes username

  VPN-group-policy levelwingVPN

  type of remote access service

  username, password finance 9TxE6jWN/Di4eZ8w encrypted privilege 0

  username attributes finance

  VPN-group-policy levelwingVPN

  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

  type of remote access service

  IPSec-attributes tunnel-group DefaultL2LGroup

  Disable ISAKMP keepalive

  tunnel-group 50.75.217.246 type ipsec-l2l

  IPSec-attributes tunnel-group 50.75.217.246

  pre-shared-key *.

  Disable ISAKMP keepalive

  type tunnel-group levelwingVPN remote access

  tunnel-group levelwingVPN General-attributes

  address LVCHSVPN pool

  Group Policy - by default-levelwingVPN

  levelwingVPN group of tunnel ipsec-attributes

  pre-shared-key *.

  tunnel-group 216.59.44.221 type ipsec-l2l

  IPSec-attributes tunnel-group 216.59.44.221

  pre-shared-key *.

  tunnel-group 216.59.44.220 type ipsec-l2l

  IPSec-attributes tunnel-group 216.59.44.220

  pre-shared-key *.

  Disable ISAKMP keepalive

  !

  !

  !

  Policy-map global_policy

  !

  context of prompt hostname

  Cryptochecksum:ed7f4451c98151b759d24a7d4387935b

  : end

  Hello

  It seems to me that you've covered most of the things.

  You however not "said" Configuring VPN L2L that traffic between the pool of VPN and network camp should be in tunnel

  outside_pri_cryptomap to access extended list ip 192.168.12.0 allow 255.255.255.0 object-group CHS-Colo

  Although naturally the remote end must also the corresponding configurations for users of VPN clients be able to pass traffic to the site of the camp.

  -Jouni

• Cisco VPN Site to Site with a static and dynamic does not

  Hello

  I have ASA 5510 in Headquarters with static, IP and ASA 5505 in the remote site behind ADSL router trying to establish VPN, but its failure in phase 1

  Config of the headquarters

  interface Ethernet0/0

  Description link to router LeaseLine

  nameif outside

  security-level 0

  IP x.x.x.x 255.255.255.248

  !

  interface Ethernet0/1

  Description link to LAN internal

  nameif inside

  security-level 100

  IP 172.17.1.15 255.255.255.0

  access extensive list ip 172.17.1.0 inside_nat0_outbound_1 allow 255.255.255.0 172.20.1.0 255.255.255.0

  access extensive list ip 172.17.1.0 inside_nat0_outbound_1 allow 255.255.255.0 172.19.1.0 255.255.255.0

  access extensive list ip 172.17.1.0 vpn_to_remote allow 255.255.255.0 172.19.1.0 255.255.255.0

  extended VPN ip 172.17.1.0 access list allow 255.255.255.0 172.20.1.0 255.255.255.0

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound_1

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1

  Crypto ipsec transform-set esp-aes-256-md5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  correspondence address 1 crypto dynamic-map cisco VPN

  Crypto dynamic-map cisco 1 set of transformation-ESP-AES-256-SHA

  card crypto outside_map 10 correspondence address vpn_to_remote

  card crypto outside_map 10 set pfs

  card crypto outside_map 10 peers set y.y.y.y

  card crypto outside_map 10 transform-set esp-aes-256-md5

  outside_map crypto 10 card value reverse-road

  dynamic outside_map 30-isakmp ipsec crypto map Cisco

  outside_map interface card crypto outside

  crypto isakmp identity address

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  aes-256 encryption

  md5 hash

  Group 5

  life 86400

  crypto ISAKMP policy 20

  preshared authentication

  aes encryption

  md5 hash

  Group 2

  life 86400

  crypto ISAKMP policy 30

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  Crypto isakmp nat-traversal 20

  tunnel-group y.y.y.y type ipsec-l2l

  tunnel-group ipsec-attributes y.y.y.y

  pre-shared-key *.

  tunnel-group parkplace type ipsec-l2l

  tunnel-group ipsec-attributes parkplace

  pre-shared-key *.

  The Remote Site configuration

  interface Vlan1

  nameif inside

  security-level 100

  address 172.20.1.1 IP 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP 192.168.1.2 255.255.255.0

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  ICMP list extended access permit icmp any one

  access-list SHEEP extended ip 172.20.1.0 allow 255.255.255.0 172.17.1.0 255.255.255.0

  extended VPN 172.20.1.0 ip access list allow 255.255.255.0 172.17.1.0 255.255.255.0

  Global 1 interface (outside)

  NAT (inside) 0 access-list SHEEP

  NAT (inside) 1 0.0.0.0 0.0.0.0 outdoors

  Access-group ICMP in interface outside

  Route outside 0.0.0.0 0.0.0.0 192.168.1.1 1

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  crypto map outside_map 1 is the VPN address

  peer set card crypto outside_map 1 83.111.252.242

  card crypto outside_map 1 set of transformation-ESP-AES-256-SHA

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  Crypto isakmp nat-traversal 20

  tunnel-group fairmount type ipsec-l2l

  tunnel-group fairmount ipsec-attributes

  pre-shared-key *.

  Best regards / Asfar

  Hello

  Have you tried to replace the names of 'tunnel-group' entry with Ip address on both ends... ?

  Thank you

  MS

• Need help with configuration on cisco vpn client settings 1941

  Hey all,.

  I just bought a new router 1941 SRI and need help with the configuration of the parameters of the VPN client. Orders aspect a little different here, as I'm used to the configuration of ASA and PIX for vpn, routers not...

  If anyone can help with orders?

  I need the installation:

  user names, authentication group etc.

  Thank you!

  Take a peek inside has the below examples of config - everything you need: -.

  http://www.Cisco.com/en/us/products/ps5854/prod_configuration_examples_list.html

  HTH >

  Andrew.

• Configuration of CISCO VPN (WRVS4400N) router

  Dear,

  Please help me to setup VPN connection,

  Headquarters: firewall fortigate-200B - SSL, IPsec

  Branch: WRVS4400N Wireless-N Gigabit Security Router with VPN

  The two sides have the public IP address

  Wrong forum, post in the 'small business routers. You can move your ad using the Panel on the right actions.

• Cisco VPN Site to Site - Interesting traffic required to put in place a VPN or not?

  A really quick and easy for the guru there VPN...

  Essentially, I am setting up a VPN for backup, but there is NO interesting traffic unfortunately and we need VPN upward.

  So... is this possible?

  Thanks in advance

  Arnoult

  I would also like to add to David's response. Some persistent according to which firewall and configuration, you use either have phase 1 KeepAlive, or full end-to-end KeepAlive 2 phase.

  I do not know the equivalent of Cisco or if they even have one. Example of this with Juniper dead-peer-detection (DPD) sends only persistent IKEv1/2, while the monitoring of VPN sends ICMP echo requests to follow the VPN / or says he's dead.

  With DPD, it isn't exactly a traffic interesting survey, it's just the IKE "Hello you're here" messages. After awhile, the vpn can go down due to lack of interesting traffic or having to re - negotiate the phase 2. However, to create interesting traffic, you can assign an sla for icmp ip end-to-end.

  You may have noticed in the past that VPN will just down after a while (if you have this configuration)

  There are three modes of RE how actually starts in the negotiations on the SAA

  One answer: Specifies that this peer does respond to incoming connections from IKE first during the exchange of the original owner to determine the appropriate peer to connect to.

  Bidirectional (default): Specifies that this peer can accept and come from the connections based on this crypto map entry. This is the type of default login for Site-to-Site connections. [Only if interesting traffic is put in correspondence]

  Originate only: Specifies that this peer is launching the first Exchange of industrial property to determine the appropriate peer to connect to.

  For the ASA Experts out there, please correct me if I'm wrong.

  Hope this helps

  Bilal

• IOS VPN L2L + C2L (cisco IPSEC client)

  Hello

  need to configure a C2L (client to the LAN) vpn on a cisco router where there is already an ipsec vpn.

  !!! already configured on the ROUTER

  !

  crypto ISAKMP policy 1

  md5 hash

  preshared authentication

  address of cisco key crypto isakmp 0.0.0.0 0.0.0.0

  !

  !

  Crypto ipsec transform-set esp - esp-md5-hmac Tunnel

  !

  crypto dynamic-map 10 Road-Tunnel

  game of transformation-Tunnel

  match address 115

  !

  !

  !

  !

  Crypto map 10 ipsec-isakmp Crypto-Tunnel Dynamic Channel-Tunnel

  !

  point-to-point interface ATM0/1/0.1

  card crypto Crypto-Tunnel

  !

  access-list 115 permit ip 10.0.0.0 0.0.0.255 192.168.168.0 0.0.0.255

  access-list 115 permit ip 10.0.0.0 0.0.0.255 10.2.0.0 0.0.0.255

  access-list 115 deny ip 10.0.0.0 0.0.0.255 any

  !

  !!! new configuration for cisco ipsec client

  !

  no address Cisco key crypto isakmp 0.0.0.0 0.0.0.0

  address of cisco key crypto isakmp 0.0.0.0 0.0.0.0 no.-xauth

  !

  AAA new-model

  !

  AAA authentication login AutClient local

  AAA authorization groupauthor LAN

  !

  !

  username 0 pippo pippo

  !

  crypto ISAKMP policy 10

  BA 3des

  preshared authentication

  Group 2

  !

  ISAKMP crypto client configuration group vpnclient

  key 0-pippo

  DNS 10.10.10.10

  WINS 10.10.10.20

  domain cisco.com

  pool ippoolvpnclient

  Save-password

  ACL 188

  !

  !

  card crypto Crypto-Tunnel client authentication list AutClient

  card crypto Crypto-Tunnel isakmp authorization list groupauthor

  card crypto Crypto-Tunnel client configuration address respond

  card crypto Crypto-ipsec-isakmp dynamic dynmap Tunnel 20

  !

  Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT

  !

  Crypto-map dynamic dynmap 10

  match address 188

  Set transform-set RIGHT

  !

  !

  !

  !

  IP local pool ippoolvpnclient 10.99.0.1 10.99.0.30

  !

  access-list 188 note #.

  access-list 188 note # split tunneling VPN C2L

  access-list 188 allow ip 10.99.0.0 0.0.0.31 10.0.0.0 0.0.0.255

  !

  can you tell me if the new configuration is OK?

  Thank you all

  NOT the ACL should be the opposite. Sound from the point of view of the router.

  access-list 188 allow ip 10.2.0.0 0.0.0.255 10.5.0.0 0.0.0.31

  Concerning

  Farrukh

• Cisco VPN client + VPN site-to-site

  Hi all

  I have two ASA5505 with a site to site VPN.

  One of the ASA is connected to the internal network 192.168.150.0.

  It is connected to 192.168.151.0.

  I also configured IPSec Cisco VPN client that is connected to 192.168.150.0.

  I would like to know if it is possible for a connected with the Cisco VPN client to access the 192.168.151.0 by the site-to-site VPN network.

  Thank you!

  Hello

  If you mean that the IP addresses of the VPN Pool are something like 192.168.150.x then I suggest to use a totally different network than those used on LANs.

  At the software level 9.1 basically causes changes to how are the NAT0 configurations.

  MAIN SITE

  network of the VPN-POOL object

  subnet x.x.x.x y.y.y.y

  being REMOTE-LAN network

  192.168.151.0 subnet 255.255.255.0

  destination of static NAT VPN VPN-POOL POOL (outdoors, outdoor) static REMOTE - LAN LAN

  REMOTE SITE

  network of the VPN-POOL object

  subnet x.x.x.x y.y.y.y

  the object of the LAN network

  192.168.151.0 subnet 255.255.255.0

  NAT static destination LAN LAN (indoor, outdoor) static source VPN-VPN-POOL

  Otherwise, I would imagine that the same kind of configurations above apply. You need the ' same-security-movement ' command to allow the 'outside' to ' outside ' of the movement. You will have to ensure that the ACL from Tunnel Split contains the remote site network. And of course, you should make sure that the ACL crypto sets / include traffic between VPN pool and the network 192.168.151.0/24 on both sides ASAs.

  -Jouni

• Two links one for VPN Site to Site and another for internet on the same router configuration

  Hi all

  I have 2 internet links an ADSL and lease terminated on the same router. I need to configure ADSL for VPN site-to-site of HO and internet leased line dedicated for all users.

  my site IP subnet is 10.10.100.0/24 and HO subnet is 10.1.0.0/24.   Please find attached Config and advice it will be OK and works fine

  Thanks in advance...

  Mikael

  Hello

  For me, it looks like it has configured the route correctly;

  ip route 0.0.0.0 0.0.0.0 fastethernet4 -> for all traffic to the internet.

  Road 10.1.0.0 ip 255.255.255.0 Dialer1 -> for vpn traffic to HO.
  

  The public_IP_HO must be defined according to the map of encryption using the set by the peers command.

  I want to add is on the isakmp policy hash attribute, you can choose between sha/md5 or whatever available on your device. Make sure that the isakmp policy to match political isakmp of your HO.

  The other thing is the acl for the internet. You may want to consider replacing the deny statement if you want to deny traffic only to your jar currently it is said to deny all traffic 10.10.100.0 10.0.0.0 network, not to the 10.1.0.0 HO (network).

  HTH,

• VPN site-to-site between 3 dynamic ip site to ip address static site

  Hi all

  I have a scenario,

  I have a static ip address in the headquarters and I have 4 office locations of all offices of construction site have dynamic ip.

  I created a site to site vpn between HO perfect work for 1 site office

  but I create a second profile in HO ASA for site office 2 config, I have created does not work.

  I use HO ASA 5520 and branches 5505 all site offices is ADSL connection

  I enclose my config HO

  Can u sat down just how dynamic config several profile in the HO

  Thank you

  Zeus

  It's just a suggestion...

  You want to get 3 dynamic sites connected with the HO, right?

  HO:

  As the branch have dynamic ip, you must use the DefaultL2LGroup profile (the same shared key for all three BO).

  The crypto-plan should be dynamic with the right soure/destination NET configured. Exempt NAT with the same source/destination NET as well.

  BO:

  Configured as a VPN Site-2-Site normal with the HO. The IPSEC Wizard is very useful.

  To connect to HO Bo, the branch must initiate the tunnel. After that, you have 2 full functional site site VPN.

  http://www.Cisco.com/en/us/partner/products/ps6120/products_configuration_example09186a00805733df.shtml

  Welcome,

  Norbert

• Allow Cisco VPN Client through the firewall?

  Hello

  How can I allow a cisco VPN client work from the inside of our network to an external IP address?

  We have customers who wish to make use of their Cisco VPN Client companies but our ASA blocks I think?

  Also (sorry to ask) a friend in South America is having the same problem but I am not hink they use Cisco, is there a default port used by the client to Cisco? then I can send this info?

  Thank you

  Generally, the ASA will allow the IPSEC from the inside to outside traffic. This is when you want it came outside and connect to you - this is where it gets creative. You restrict outgoing traffic at all? You deny all ip/tcp/udp outgoing?

  But may depend on if the remote end is compaitable NAT - T, and if they have configured. Another question would be how they allow VPN traffic go?

• Unable to connect to the Cisco VPN you use native client: El Capitan

  I'm unable to connect to the Cisco VPN using native client server Cisco OSX via IPSec. Before the upgrade for connections VPN El Capitan has worked without any problems. VPN uses the shared secret of group. It seems, I get the error "raccoon [2580] ': could not send message vpn_control: Broken pipe ' during the connection."

  When I upgraded to El Capitan, VPN connection has stopped working. I tried to do the following:

  * connect using the old work VPN connection: without success

  Config: Hand [server address, account name],

  AUTH settings [shared secret, the Group name].

  Advanced [mode to use the passive FTP = TRUE]

  errors:

  "authd [124]: copy_rights: _server_authorize failed.

  "raccoon [2580]: could not send message vpn_control: Broken pipe"

  ...

  * Add new VPN connection using L2TP over IPSec: without success

  Config: Hand [server address, account name],

  Authentication settings [user authentication: password, identification of the Machine: Shared Secret].

  Advanced [send all traffic on the VPN = TRUE]

  errsors:

  "pppd [2616]: password not found in the system keychain.

  "authd [124]: copy_rights: _server_authorize failed.

  ...

  
  

  * Add new connection using Cisco via IPSec VPN: without success

  Main config: [server address, account name].

  AUTH settings [shared secret, the Group name].

  Advanced [mode to use the passive FTP = TRUE]

  errors:

  "authd [124]: copy_rights: _server_authorize failed.

  "raccoon [2580]: could not send message vpn_control: Broken pipe"

  VPN server is high and does not work and accepts connections, this problem is entirely on the client side.

  I. Journal of Console app existing/Legacy VPN connection:

  26/03/16 10:24:01, 000 syslogd [40]: sender ASL statistics

  26/03/16 10:24:01, nesessionmanager 311 [2112]: NESMLegacySession [VPN_CONN_NAME$: B7816CCC-2D2C-4D6D - 83 D 9-B2C8B6EB8589]: received an order to start SystemUIServer [2346]

  26/03/16 10:24:01, nesessionmanager 311 [2112]: NESMLegacySession [VPN_CONN_NAME$: B7816CCC-2D2C-4D6D - 83 D 9-B2C8B6EB8589]: changed to connecting status

  26/03/16 10:24:01, nesessionmanager 313 [2112]: IPSec to connect to the server $VPN_SERVER_IP

  26/03/16 10:24:01, 316 nesessionmanager [2112]: phase 1 of the IPSec from.

  26/03/16 10:24:01, racoon 338 [2580]: agreed to the takeover of vpn connection.

  26/03/16 10:24:01, racoon 338 [2580]: agreed to the takeover of vpn connection.

  26/03/16 10:24:01, racoon 339 [2580]: IPSec to connect to the server $VPN_SERVER_IP

  26/03/16 10:24:01, racoon 339 [2580]: IPSec to connect to the server $VPN_SERVER_IP

  26/03/16 10:24:01, racoon 339 [2580]: connection.

  26/03/16 10:24:01, racoon 339 [2580]: IPSec Phase 1 started (initiated by me).

  26/03/16 10:24:01, racoon 339 [2580]: IPSec Phase 1 started (initiated by me).

  26/03/16 10:24:01, racoon 349 [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

  26/03/16 10:24:01, racoon 350 [2580]: > > > > > status of phase change = Phase 1 began by us

  26/03/16 10:24:01, racoon 350 [2580]: > > > > > status of phase change = Phase 1 began by us

  26/03/16 10:24:01, racoon 381 [2580]: no message must be encrypted, 0x14a1, side 0 status

  26/03/16 10:24:01, racoon 381 [2580]: no message must be encrypted, 0x14a1, side 0 status

  26/03/16 10:24:01, 381 nesessionmanager [2112]: Controller IPSec: IKE FAILED. phase 2, assert 0

  26/03/16 10:24:01, 381 nesessionmanager [2112]: Controller IPSec: retry the aggressive mode IPSec with DH group 2

  26/03/16 10:24:01, nesessionmanager 404 [2112]: phase 1 of the IPSec from.

  26/03/16 10:24:01, racoon 404 [2580]: IPSec to connect to the server $VPN_SERVER_IP

  26/03/16 10:24:01, racoon 404 [2580]: IPSec to connect to the server $VPN_SERVER_IP

  26/03/16 10:24:01, racoon 405 [2580]: connection.

  26/03/16 10:24:01, racoon 405 [2580]: IPSec Phase 1 started (initiated by me).

  26/03/16 10:24:01, racoon 405 [2580]: IPSec Phase 1 started (initiated by me).

  26/03/16 10:24:01, 407 raccoon [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

  26/03/16 10:24:01, 407 raccoon [2580]: > > > > > status of phase change = Phase 1 began by us

  26/03/16 10:24:01, 407 raccoon [2580]: > > > > > status of phase change = Phase 1 began by us

  26/03/16 10:24:01, racoon 436 [2580]: port 62465 anticipated, but 0

  26/03/16 10:24:01, racoon 436 [2580]: port 62465 anticipated, but 0

  26/03/16 10:24:01, 463 raccoon [2580]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).

  26/03/16 10:24:01, 463 raccoon [2580]: > > > > > status of phase change = Phase 1 began with a peer

  26/03/16 10:24:01, 463 raccoon [2580]: > > > > > status of phase change = Phase 1 began with a peer

  26/03/16 10:24:01, 463 raccoon [2580]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).

  26/03/16 10:24:01, 463 raccoon [2580]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).

  26/03/16 10:24:01, 463 raccoon [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).

  26/03/16 10:24:01, 463 raccoon [2580]: IPSec Phase 1 established (initiated by me).

  26/03/16 10:24:01, 463 raccoon [2580]: IPSec Phase 1 established (initiated by me).

  26/03/16 10:24:01, 484 raccoon [2580]: IPSec Extended requested authentication.

  26/03/16 10:24:01, 484 raccoon [2580]: IPSec Extended requested authentication.

  26/03/16 10:24:01, nesessionmanager 485 [2112]: IPSec asking extended authentication.

  [26/03/16 10:24:01, 494 nesessionmanager [2112]: NESMLegacySession[$VPN-CONN-NAME:B7816CCC-2D2C-4D6D-83D9-B2C8B6EB8589]: status changed by disconnecting

  26/03/16 10:24:01, 495 nesessionmanager [2112]: IPSec disconnection from the server $VPN_SERVER_IP

  26/03/16 10:24:01, racoon 495 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

  26/03/16 10:24:01, racoon 495 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

  26/03/16 10:24:01, racoon 495 [2580]: IKE Packet: forward the success. (Information message).

  26/03/16 10:24:01, racoon 495 [2580]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).

  26/03/16 10:24:01, racoon 495 [2580]: could not send message vpn_control: Broken pipe

  26/03/16 10:24:01, racoon 495 [2580]: could not send message vpn_control: Broken pipe

  [26/03/16 10:24:01, 496 nesessionmanager [2112]: NESMLegacySession[$VPN-CONN-NAME:B7816CCC-2D2C-4D6D-83D9-B2C8B6EB8589]: status changed to offline, last stop reason no

  26/03/16 10:24:01, racoon 496 [2580]: glob found no match for the path "/ var/run/racoon/*.conf".

  26/03/16 10:24:01, racoon 496 [2580]: glob found no match for the path "/ var/run/racoon/*.conf".

  26/03/16 10:24:01, racoon 496 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

  26/03/16 10:24:01, racoon 496 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

  $VPN_SERVER_IP

  II. new VPN connection using L2TP over IPSec Console app log:

  26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetFillColorWithColor: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetStrokeColorWithColor: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextFillRects: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextClipToRect: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetShouldSmoothFonts: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetFontAntialiasingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetShouldSmoothFonts: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, com.apple.preference.network.remoteservice [2539 295]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, com.apple.preference.network.remoteservice [2539 295]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:28, [2539 339] com.apple.preference.network.remoteservice: error in CoreDragRemoveTrackingHandler:-1856

  26/03/16 10:37:28, [2539 339] com.apple.preference.network.remoteservice: error in CoreDragRemoveReceiveHandler:-1856

  26/03/16 10:37:28, com.apple.xpc.launchd [1 393]: (com.apple.SystemUIServer.agent [2346]) Service was released due to the signal: Broken pipe: 13

  26/03/16 10:37:28, Spotlight 461 [459]: spot: logging agent

  26/03/16 10:37:28, [2539 487] com.apple.preference.network.remoteservice: service - area of the one error ERROR = NEConfigurationErrorDomain Code = 9 "configuration is unchanged" UserInfo = {NSLocalizedDescription = configuration is unchanged}

  26/03/16 10:37:28, [2539 487] com.apple.preference.network.remoteservice: service - area of the one error ERROR = NEConfigurationErrorDomain Code = 9 "configuration is unchanged" UserInfo = {NSLocalizedDescription = configuration is unchanged}

  26/03/16 10:37:28, nesessionmanager 519 [2112]: NESMLegacySession [VPN_CONN_NAME$: 04c 10954-16 b 2 - 40BB - B3F1 - 9288F968029E]: received an order to start com.apple.preference.network.re [2539]

  26/03/16 10:37:28, nesessionmanager 519 [2112]: NESMLegacySession [VPN_CONN_NAME$: 04c 10954-16 b 2 - 40BB - B3F1 - 9288F968029E]: changed to connecting status

  26/03/16 10:37:28, com.apple.SecurityServer [75 536]: rules of problem opening the file "/ etc/authorization ': no such file or directory

  26/03/16 10:37:28, com.apple.SecurityServer [75 536]: sandbox has denied authorizing the right "system.keychain.modify" customer "/ usr/libexec/nehelper" [184]

  26/03/16 10:37:28, 536 pppd [2616]: NetworkExtension is the controller

  26/03/16 10:37:28, 538 pppd [2616]: NetworkExtension is the controller

  26/03/16 10:37:28, nehelper 540 [184]: 10954-16 b 2 - 40BB - B3F1 04c - 9288F968029E: cannot copy content, returned SecKeychainItemCopyContent user interaction is not allowed.

  26/03/16 10:37:28, nehelper 540 [184]: 10954-16 b 2 - 40BB - B3F1 04c - 9288F968029E: SecKeychainItemFreeContent returned the user interaction is not allowed.

  26/03/16 10:37:28, 570 pppd [2616]: password not found in the system keychain

  26/03/16 10:37:28, 572 pppd [2616]: publish_entry SCDSet() failed: success!

  26/03/16 10:37:28, 573 pppd [2616]: publish_entry SCDSet() failed: success!

  26/03/16 10:37:28, 573 pppd [2616]: pppd 2.4.2 (Apple version 809.40.5) started by $VPN_SERVER_USER, uid 501

  26/03/16 10:37:28, SystemUIServer 620 [2615]: [BluetoothHIDDeviceController] EventServiceConnectedCallback

  26/03/16 10:37:28, SystemUIServer 620 [2615]: [BluetoothHIDDeviceController] EventServiceDisconnectedCallback

  26/03/16 10:37:28, authd 720 [124]: copy_rights: _server_authorize failed

  26/03/16 10:37:28, sandboxd 748 [120]: nehelper (184) ([184]) refuse the authorization-right-get system.keychain.modify

  III. New connection of Cisco VPN through IPSec Console app log:

  26/03/16 10:18:26, 917 WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x10d of window is not attached to the window 0x10f

  26/03/16 10:19:43, 975 WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x10d of window is not attached to the window 0x10f

  [26/03/16 10:19:56 nesessionmanager 265 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: received an order to start SystemUIServer [2346]

  [26/03/16 10:19:56 nesessionmanager 265 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: changed to connecting status

  26/03/16 10:19:56, nesessionmanager 267 [2112]: IPSec to connect to the server $VPN_SERVER_IP

  26/03/16 10:19:56, nesessionmanager 270 [2112]: phase 1 of the IPSec from.

  26/03/16 10:19:56, authd 284 [124]: copy_rights: _server_authorize failed

  26/03/16 10:19:56, 295 raccoon [2576]: agreed to the takeover of vpn connection.

  26/03/16 10:19:56, 295 raccoon [2576]: agreed to the takeover of vpn connection.

  26/03/16 10:19:56, 295 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

  26/03/16 10:19:56, 295 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

  26/03/16 10:19:56, racoon 296 [2576]: connection.

  26/03/16 10:19:56, racoon 296 [2576]: IPSec Phase 1 started (initiated by me).

  26/03/16 10:19:56, racoon 296 [2576]: IPSec Phase 1 started (initiated by me).

  26/03/16 10:19:56, racoon 308 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

  26/03/16 10:19:56, racoon 308 [2576]: > > > > > status of phase change = Phase 1 began by us

  26/03/16 10:19:56, racoon 308 [2576]: > > > > > status of phase change = Phase 1 began by us

  26/03/16 10:19:56, 352 raccoon [2576]: no message must be encrypted, 0x14a1, side 0 status

  26/03/16 10:19:56, 352 raccoon [2576]: no message must be encrypted, 0x14a1, side 0 status

  26/03/16 10:19:56, nesessionmanager 352 [2112]: Controller IPSec: IKE FAILED. phase 2, assert 0

  26/03/16 10:19:56, nesessionmanager 353 [2112]: Controller IPSec: retry the aggressive mode IPSec with DH group 2

  26/03/16 10:19:56, nesessionmanager 373 [2112]: phase 1 of the IPSec from.

  26/03/16 10:19:56, 374 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

  26/03/16 10:19:56, 374 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

  26/03/16 10:19:56, 374 raccoon [2576]: connection.

  26/03/16 10:19:56, 374 raccoon [2576]: IPSec Phase 1 started (initiated by me).

  26/03/16 10:19:56, 374 raccoon [2576]: IPSec Phase 1 started (initiated by me).

  26/03/16 10:19:56, racoon 376 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

  26/03/16 10:19:56, racoon 376 [2576]: > > > > > status of phase change = Phase 1 began by us

  26/03/16 10:19:56, racoon 376 [2576]: > > > > > status of phase change = Phase 1 began by us

  26/03/16 10:19:56, racoon 404 [2576]: port 62465 anticipated, but 0

  26/03/16 10:19:56, racoon 404 [2576]: port 62465 anticipated, but 0

  26/03/16 10:19:56, racoon 432 [2576]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).

  26/03/16 10:19:56, racoon 432 [2576]: > > > > > status of phase change = Phase 1 began with a peer

  26/03/16 10:19:56, racoon 432 [2576]: > > > > > status of phase change = Phase 1 began with a peer

  26/03/16 10:19:56, racoon 432 [2576]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).

  26/03/16 10:19:56, racoon 432 [2576]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).

  26/03/16 10:19:56, racoon 432 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).

  26/03/16 10:19:56, 433 raccoon [2576]: IPSec Phase 1 established (initiated by me).

  26/03/16 10:19:56, 433 raccoon [2576]: IPSec Phase 1 established (initiated by me).

  26/03/16 10:19:56, racoon 453 [2576]: IPSec Extended requested authentication.

  26/03/16 10:19:56, racoon 453 [2576]: IPSec Extended requested authentication.

  26/03/16 10:19:56, 454 nesessionmanager [2112]: IPSec asking extended authentication.

  [26/03/16 10:19:56, nesessionmanager 464 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: status changed by disconnecting

  26/03/16 10:19:56, nesessionmanager 464 [2112]: IPSec disconnection from the server $VPN_SERVER_IP

  26/03/16 10:19:56, racoon 465 [2576]: IPSec disconnection from the server $VPN_SERVER_IP

  26/03/16 10:19:56, racoon 465 [2576]: IPSec disconnection from the server $VPN_SERVER_IP

  26/03/16 10:19:56, racoon 465 [2576]: IKE Packet: forward the success. (Information message).

  26/03/16 10:19:56, racoon 465 [2576]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).

  26/03/16 10:19:56, racoon 465 [2576]: could not send message vpn_control: Broken pipe

  26/03/16 10:19:56, racoon 465 [2576]: could not send message vpn_control: Broken pipe

  [26/03/16 10:19:56, nesessionmanager 465 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: status changed to offline, last stop reason no

  26/03/16 10:19:56, 466 raccoon [2576]: glob found no match for the path "/ var/run/racoon/*.conf".

  26/03/16 10:19:56, 466 raccoon [2576]: glob found no match for the path "/ var/run/racoon/*.conf".

  26/03/16 10:19:56, 466 raccoon [2576]: IPSec disconnection from the server $VPN_SERVER_IP

  26/03/16 10:19:56, 466 raccoon [2576]: IPSec disconnection from the server $VPN_SERVER_IP

  It seems that I solved the problem, but I'm not sure it helped.

  After restart of the operating system, the two connections: old and new Cisco via IPSec connection, began to work.

• Cisco PIX VPN pass through (sorry, tricky!)

  Hello

  I'm having some problems with allowing IPSEC through a Cisco PIX 501. The configuration is the following:

  Host (mail Client) (192.168.1.111)

  |

  PIX (NAT)

  |

  INTERNET

  |

  (Checkpoint) VPN server

  The problem is, the PIX guard dropping my outgoing isakmp packets on its * internal * inetrface!

  710005: request UDP and eliminated from 192.168.1.111/500 to inside:192.168.1.1/isakmp

  710005: request UDP and eliminated from 192.168.1.111/500 to inside:192.168.1.1/isakmp

  710005: request UDP and eliminated from 192.168.1.111/500 to inside:192.168.1.1/isakmp

  710005: request UDP and eliminated from 192.168.1.111/500 to inside:192.168.1.1/isakmp

  710005: request UDP and eliminated from 192.168.1.111/500 to inside:192.168.1.1/isakmp

  710005: request UDP and eliminated from 192.168.1.111/500 to inside:192.168.1.1/isakmp

  Does anyone know why it does this? Anyting to my in-house (security level 100) should go directly to my giving and external interface on the net. For some reason, is to treat the isakmp packets differently...

  I have included my config as an attachment, can we see what I missed or have any ideas why it loses the isakmp packets?

  Thanks for any help.

  Nick Chettle

  Check users. C and edit it with your favorite editor. Check if you have a private or public IP address!

  I tried to find in the really safe base article I've seen a couple of months ago but I can't find any more.

  https://SecureKnowledge.checkpoint.com/SK/public/intro.jsp

  See also this FAQ:

  http://www.phoneboy.com/bin/view.pl/FAQs/SecureClientFAQs

  See CheckPoint VPN-1 Guide that is on the installation CD or go to the web site of checkpoints, BUT you need a valid account Center user to read and download the documentation. Start looking at page 119 and 211.

  As usual, nothing is free at the checkpoint.

  http://www.checkpoint.com/support/technical/documents/docs_r55.html

  sincerely

  Patrick

• How to allow access to a local area network behind the cisco vpn client

  Hi, my question is about how to allow access to a local area network behind the cisco vpn client

  With the help of:

  • Cisco 5500 Series Adaptive Security Appliance (ASA) that is running version 8.2 software
  • Cisco VPN Client version 5.0 software

  Cisco VPN client allows to inject a local routes in the routing table Cisco ASA?

  Thank you.

  Hi Vladimir,.

  Unfortunately this is not a supported feature if you connect through the VPN Client. With VPN Client, that the VPN Client can access the VPN Client LAN host/local machine, not host from the local network to business as customer VPN is not designed for access from the local company network, but to the local corporate network.

  If you want to access from your local business to your LAN network, you need to configure LAN-to-LAN tunnel.