Configure the server

Similar Questions

• Network connectivity error when you configure the server for vSphere

  I've just set up my first hypervisor, and naturally it became painfully obvious how much I have to learn.

  I met a problem that I don't know how to fix. When you configure the server, I have configured network settings manually in order to give him the good gateway, subnet mask and static IP address. Unfortunately, I still get "Failed" when I ping the DHCP server. ""

  Hope that the community will be able to guide me in this problem. I am sure it takes to understand this, so let me know what is needed and how to get more information. Thank you!

  Find the person who is responsible for the management of the switch and check which port is set to for example the VLAN you need. Depending on your setting of the port must be configured as an access port or a 802. 1 q port if you configure the VLAN ID on the ESXi host

  André

• What role must be installed and configured the server MRS

  Hi friends,

  What is the role for the domain user account Windows is needed to install and configure the server MRS?

  Should the area of employment must be the local administrator of Vcenter serere?

  Thank you

  Hello

  According to the MIS Program administration guide, you must be administrator to install SRM.

  In addition, my experience on Windows 2008 R2, you must click on the installer and choose "Run as Administrator", otherwise intallation process will be blocked.

  Michael.

• RDS licensing mode not configured the server 2012

  Everyone gets it on a 2012r2 RDS Server.

  I installed vWorkspace ' Terminal Server / RD Session Host role ' and turned on the 'Remote Desktop Session Host' feature on the RDS Server and when I connect to the RDS Server, I get a little popup saying right down

  Remote Desktop services "remote Desktop licensing mode is not configured" will stop working in 106 days.

  Any ideas...

  Hi Dan,.

  A RDS 2012r2 will require a remote office 2012 with 2012 cals installed remote desktop license server to handle licensing.

  You have a remote office 2012 configured license server in your environment or is it 2008? If not, you will need to create one, but it can be used to service existing if you want to consolidate everything on a single server, the RDS 2008 servers.

  Without a configured license server, it will return to the period of 120 days, you get as standard with a host of the session.

  Thank you

• How to configure the server Esxi 3.5 on Vmware workstation 7

  Hello

  I m new technology Vmware Esxi. I will join the formation of VCP5 next month. But before participating in this training, I would take it somewhere on the same experience. So, for this, I install Vmware workstation 7 on my home PC. I have install Esxi 3.5 server on one machine virtual workstation.

  I just edit the machine configuration file virtual vmware [C:\Documents and Settings\a48923\My Documents\My Machines\Esxi virtual-01] as shown below which is marked in "BOLD" letter.

  scsi0. Present = 'TRUE '.
  scsi0.virtualDev = "free".
  memsize = "1024".
  scsi0:0. Present = 'TRUE '.
  scsi0:0. FileName = 'Esxi - 01.vmdk.
  IDE1:0. Present = 'TRUE '.
  IDE1:0. AutoDetect = 'TRUE '.
  IDE1:0. DeviceType = "cdrom-raw"
  floppy0.startConnected = "FALSE".
  floppy0. FileName = "".
  floppy0. AutoDetect = 'TRUE '.
  ethernet0. Present = 'TRUE '.

  ethernet0.virtualDev = "vlance.
  ethernet0. ConnectionType = "bridge".

  monitor_control.restrict_backdoor = TRUE
  monitor_control.vt32 = TRUE
  Monitor.virtual_exec = "automatic".

  ethernet0.wakeOnPcktRcv = "FALSE".
  ethernet0. AddressType = 'generated '.
  roamingVM.exitBehavior = 'go '.
  displayName = "Esxi-01.
  guestOS = "redhat".
  NVRAM = "Esxi - 01.nvram.
  virtualHW.productCompatibility = "esx".
  extendedConfigFile = 'Esxi - 01.vmxf.
  ethernet0.generatedAddress = "00: 0C: 29:32:f8:b3.
  UUID. Location = "56 4 d a1 a1 32 3d 52 - 1 c 5f 62 0 a 1 c 2 b 32 f8 b3"
  UUID. BIOS = "56 4 d a1 a1 32 3d 52 - 1 c 5f 62 0 a 1 c 2 b 32 f8 b3"
  cleanShutdown = 'TRUE '.
  Replay.Supported = 'TRUE '.
  Replay.FileName = «»
  scsi0:0. Redo = «»
  vmotion.checkpointFBSize = "16777216.
  ethernet0.generatedAddressOffset = '0 '.
  tools.remindInstall = 'TRUE '.
  ethernet0.linkStatePropagation.enable = "FALSE".
  tools.syncTime = "FALSE".
  ethernet0.VNET = "VMnet8.

  After you change the configuration file. I started the Esxi server. But when booting, it shows lmdriver failed to load. When I tried to configure the Exsi network, the back always prompt to reset the default settings of the network. Then I searched the internet, I found this machine NIC not to support Esxi. Is there a way to configure the Microsoft loop back adopter or any virtual adopter for esxi? So that I can install several esxi server on a single machine on vmware workstation and can be communicate with each other.

  With VMware Workstation 7 you should not need to manually configure the .vmx file. Create a new custom virtual machine and select ESX as the guest operating system. This will configure the virtual material suitable as an E1000 network adapter...

  André

• Cannot access the page e-mail channels to configure the served user's email

  Hello-
  I intend to use AIA (FP) for custom development of SOA. Foundation Pack successfully installed. The next step - I want to set up the error handling. In order to associate Email addresses with user roles Error Handling - I tired to open the page
  http:// < SOA-Host >: < port SOA >/sdpmessaging/USERPREFS - UI
  
  I get the following error
  Error 404 - not found
  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
  10.4.5 404 not found
  Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.
  
  If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address
  
  Any thoughts?
  
  Thank you

  Replace with your soa port in the url?
  http://:/sdpmessaging/userprefs-ui

  Ex:
  http://myhost:8001/sdpmessaging/userprefs - ui

  I want to say you used soa or not admin way?

  Published by: Jeremy on January 6, 2011 04:51

• Can configure the server from the host with IP address

  Hello

  I want to configure a guest computer with 2 network cards, one for LAN private and one for the external LAN.

  Right now, the problem is that I don't have that 1 useable public IP I can use on the external network address.

  Which means that it's either I configure the public ip address on the NIC host or on the comment card.

  May I just know set network bridge on the guest computer and configure the external static public IP, and then click map NETWORK address of the host machine, I set up the ip address. Will this work?

  Please notify.

  shanmomo wrote:

  If you mean that by disabling TCP/IP on the host, the guest computer can access external WiFi?

  Yes, if you use a Windows host, just uncheck the TCP/IP on the bridged card.

  Or use NAT, then both machines can connect to the internet with a single IP.

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Configuring the server for Galileo

  Hello
  
  I just downloaded Eclipse 3.5 (Galileo), EPCO 3.5 and WLS 11 g and installed Linux amd64.
  
  I'm trying to add the server to Eclipse, but WLS does not appear in the list of Server adapters. When I try to download the new Oracle Weblogic Server Tools Server adapter I get the following error message:
  
  Can not complete the installation because one or more required elements could not be found.
  Software: Oracle WebLogic Server 1.2.0.200907171310 tools (com.oracle.tools.eclipse.ganymede.wls.feature.feature.group 1.2.0.200907171310)
  Lack of requirement: requires common tools of Oracle 1.2.0.200907171310 (com.oracle.tools.eclipse.ganymede.common.feature.feature.group 1.2.0.200907171310) ' org.eclipse.platform.feature.group [3.4.1,3.5.0)', but it is not found]
  Cannot satisfy the dependency:
  From: Oracle WebLogic Server tools 1.2.0.200907171310 (com.oracle.tools.eclipse.ganymede.wls.feature.feature.group 1.2.0.200907171310)
  In: com.oracle.tools.eclipse.ganymede.common.feature.feature.group [1.2.0.200907171310]
  
  I checked my installation of Eclipse and org.eclipse.plaform v3.5.0.v20090611a - 9gEeG1HFtQcmRThO4O3aR_fqSMvJR2sJ feature is installed.
  
  Can anyone help?
  
  Thank you!

  Ok. This output, I confirmed that the Java virtual machine is less than 5.0. You are using a lower version VM can cause the kind of problem you describe. What is strange, is that I see all the oracle features listed. The list of plugin does not complete. Could you find this entire text and view all rows that have the 'oracle' in there?

  What the disk? You see oracle plugins and install features of this eclipse? Can you describe what you see?

  We are working to get access to a 64-bit linux installation to try on the spot. Not sure how long it will take.

  I wonder if it is a file permissions problem... Once you find the features and plugins of oracle, you can compare their permissions against the permissions of other plugins in your eclipse installation. May need to start over again, log in as administrator, provide costs eclipse install and hit update this session EPCO site.

  -Konstantin

• Home profiles to configure the server with vDS

  Hello

  I'm new to Host Profiles and you want to set up a new generation of server to match the existing reference host. The hardware is identical. I did a manual install and it patched, then I tried that apply the host profile after generating the answer file. I just put IPs in the answer, not the MAC addresses file. I got an error "parameter specified is not correct: PortGroupName. Now the network configuration is a little crooked, the standard vSwitch is still there, and none of the links rising vDS have a physical card associated with them.

  Would someone mind helping me through the steps you would use to apply a profile of the host to a newly built server? I do the distributed configuration manually first vswitch or anything else in preparation? Very much appreciated.

  Thank you

  Mike

  Update: well, I found the source of my error - another admin added a vmkernel port a VDS service and left there for me to stumble, the profile of the host had not been updated since. I deleted and the profile correctly applied this time. My only concern is about to add a new host for the 4 distributed vswitches and migrate the vswitch service VDS Management, I have to prepare all this manually? -Thank you, Mike.

  Hello

  With profiles of the host, you should have a host set up with everything you need (the host of reference). After this, you can create a profile from the host, set this profile to the host you want to modify, verify compliance and then apply the profile. It should ask you unique settings such as the ip addresses of the ports of vmk.

• Failed to configure the server to workstation

  Hello

  We recently had a power outage and our UPS has not be fresh enough for the failure of all. The 9 workstation I was using was installed on a Windows Server with a couple of the shared virtual computer. We are usinh WS9 for testing purposes and hope to upgrade to a version of server soon. After the crash I can't enable shared virtual computer. I tried to remove the datastores.xml, but that has not solved the problem. I also tried to see if I had more than one host entry in my hostfiles that was not the case. I don't know what else to do...

  

  My datastores.xml file:

  <ConfigRoot>
  
  
    <LocalDatastores>
  
  
      <_length>1</_length>
  
  
      <_type>hostd.host.LocalDatastoreEntry[]</_type>
  
  
      <e id="0">
  
  
        <_type>hostd.host.LocalDatastoreEntry</_type>
  
  
        <id>1</id>
  
  
        <name>standard</name>
  
  
        <path>E:\Shared Virtual Machines\</path>
  
  
      </e>
  
  
    </LocalDatastores>
  
  
    <NasVolumes>
  
  
      <_length>0</_length>
  
  
      <_type>hostd.host.NasDatastoreEntry[]</_type>
  
  
    </NasVolumes>
  
  
  </ConfigRoot>
  

  I reinstalled it and it works fine now. We had a power outage and our UPS didn't counter as much as was needed. I had to start from a snapshot as the VM disk has been corrupted.

• Configure the Server DB with a routable IP #.

  Hi im trying to connect a client application, but the client does not get the listener because the listener listen only on 127.0.0.1...
  
  My ip address on the machine is 192.168.1.9.
  
  How can I configure this DB so that I can connect through the client on another computer?
  
  Any help would be appreciated

  But if I use a user name and password I then...
  Enter the user name: system/fortune@matt

  This confirms the DB & earphone works.

  If a client has problems, the problem is localized to the client.

• How to define a connection to the server with a cluster of Olite

  Hello
  
  I install my Olite server on a single machine. This server is associated with a module of a repository. Currently, the Olite server point to a single node of the cluster.
  
  Where and how can I configure the server of Olite, then he can use all the nodes off the coast of the cluster (webtogo application and application sync), use the opportinuty to failover and load balancing?
  
  It is in the configuration config xml file or in a file of tnsname?
  
  Thank you

  OH! Oracle RAC right?

  If you use anything prior to the 10.3.0.2, then move to a node, and then change the file webtogo.ora with your RAC tns service name.

  JDBC: Slim: @(DESCRIPTION=)
  (LOAD_BALANCE = yes)
  (ADDRESS =
  (PROTOCOL = TCP)
  (HOST = node1)
  (PORT = 1521))
  (ADDRESS =
  (PROTOCOL = TCP)
  (HOST = node2)
  (PORT = 1521))
  (CONNECT_DATA = (SERVICE_NAME = nodes)))

  You will need to restart the server for the change to take effect.

  Published by: rekounas on October 22, 2008 17:11

• How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2008, the server process could not be started because the configured identity is incorrect. Check the user name and password.

  When I started and connect to the windows 2008 Server and when trying to open any folder I get the below error message:

  The server process could not be started because the configured identity is incorrect. Check the user name and password.

  Please give me your entries for this problem.

  Kind regards

  Shankar Kale
  

  Hi Shankar,

  The question you posted would be better suited in the TechNet Forums. See the link.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Hope this information helps.

• Configure Exchange server to allow the transfer of mail of the AS / 400

  I need to configure my exchange server except my AS - 400 email, how to configure the exchange server

  Hello PercyParker,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Exchange Server and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer

  Best regards

  Matthew_Ha