ExpressCache

Similar Questions

• Condusiv ExpressCache modification on Envy Phoenix 810-135qe or similar

  Does anyone have details on how to adjust/change the customized version of the software ExperssCache of Condusiv on a 810qe? The best info I've found are the Readme on my PC :-/

  Supported HP L1 just kept saying I had a CTO without necessary mods, this is the best, and so on. I did up to L2 or L3 and told me the only info/support I'd get HP to get software original work and material configs (which did not change anything on ExpressCache). The guy was kind enough to say that if the thing went belly, reminder play dumb and they would help it return to the initial state.

  I know that the retail version of the software has a cousin of GUI that comes with it (or integrated). I also read that other manufacturers of PC included something similar to it on their OEM versions. Anyone tried interacting with the version of HP with the help of one of these tools (assuming that all are independent), or even replacement of HP with retail ExpressCache?

  I thought about (1) copy of the program to test the environment (an old Dell Latitude I abuse as this is my passion) just to see what options come up and if that doesn't get me anywhere, (2) remove the mSATA card, delete ExpressCache, reinstall the card and retarget it or (3) do nothing and letting 'not used' (I hate this idea I'll have a little vision in the devil and ExpressCache are up to and it's a waste)... I know, I know, a lot of work for little gain, but I paid for the thing, so I want to use it...

  All this is part of the reconfig material where I'm going to an SSD boot and switching to a second drive HARD drive. The struggles of others dealing with 'something' in the BIOS/UEFI (and I suspect ExpressCache) when trying to simply pass on the HARD for one SSD drive are well documented here and other forms. Some fail (thinking that the SSD will be PnP on the same niche as the HHD after cloning), but others have been well informed and still had the wrong questions.  I'm re-thinking the process, starting with how to @old_geekster get first machine boot on the SSD with the HDD removed, but who want it all, I will not reinstall the stock reformatted HARD drive and I want to reconfig ExpressCache to buffering of the HARD drive now no bootable (I understand ExpressCache this will make as TSRI is only a tool to boot drive).

  If I can get the SSD as boot drive and the HARD assets as a second disk drive, I give up and just remove the thing

  Sorry for the long story (hoping for some ad libs that are off-topic)... I hope that Kenobie Obi - Wan is not my only hope (he's not Comin ' and I wouldn't rather clear CMOS)...

  See you soon,.

  A Gator

  Ref: @old_geekster and @airbridge for discussion at the disk SSD switch ref - ed above... http://h30434.www3.HP.com/T5/desktop-hardware/UEFI-BIOS-access-changing-boot-drive-order-to-SSD-Arrg...

  Let's recap...

  -So I took the old Geekster recipe and it worked perfectly. http://h30434.www3.HP.com/T5/desktop-hardware/UEFI-BIOS-access-changing-boot-drive-order-to-SSD-Arrg... Has raced with a 850 single SSD PRO for a month or more without problem. And then I decided that I had read all the threads tech bloody on Earth about this executable mystery that fractures of these machines on the reintroduction of their stock of hard drives. I had some theories, and I guess I felt lucky this morning...

  End of the story...

  -J' reformatted the HDD Seagate with another machine. I tested the water by using it as an external hard drive via the USB port for a few days on the computer, whence he came, and nothing extraordinary occurred.

  -This morning I removed the mSATA SSD and Condusiv ExpressCache later. Do not enter the software removal, as I'm sure if had to repeat several times, I wouldn't miss a good bit.

  -Reinstalled now own OEM HARD drive in slot 5. Moved the 850 slot 0 (seat of origin of the HARD drive). Play time.

  - As expected, 'it' (I guess that the executables in the UEFI?) noticed the Seagate and things are haywire. My experience was different because I don't think that the HARD drive is never turned on and I found myself on a screen of HP recovery with an option to have Win 7 try a fix.

  -Win 7 said it applied patches after crossing it 2 times, but I never exceeded the badges of HP.

  -The third time (and the things happened more slowly each round), I went to the BIOS.

  -In the BIOS, I checked the 1st UEFI boot order and noticed that the HARD drive was less UEFI in the sequence of the BIOS.

  -J' put the 850 a place north of the Windows boot sequence, and it is wonderfully since then booted up.

  I bought this PC thinking, I don't have the time or the interest to perform a build, I've never interacted with a set of cache HDDxSSD, so I'll give it a go and if I want, then I'll switch to solid state. I should also mention that I was a loyal customer of HP for decades... It is outrageous to realizing they let people buy what a machine that has been deliberately designed to resist changes in configuration without explicitly informing the consumer.

  It took me 10 x the time to do this thing where I wanted to... More ever, I'm cold put in a generation. Although this thing is now massively smooth, I'll be TINKERING the rest of my days.

• Expresscache gel/hanging Windows 8.1 - Y510P

  Hi guys, I got my Y510P Monday and performed as expected. But winning 8.1 would often freeze, hang, even on the screen restart and stop, where I had to stop manually. I found that uninstalling expresscache seems to have solved the crash / freeze... I tried to uninstall, delete my drive cache and re-install with the latest version of expresscache, but still the same problem. To uninstall. Is it a thing of compatibility with win 8.1 or a hardware problem? I run Seatools and the SSD meets all the requirements EXCEPT long credits. Although SSDLIFE said that it is in perfect condition and it should be good until 2022.

  
  

• Windows on Ideapad Y510P ExpressCache question - gel Constant 8.1

  Hello

  I recently bought the laptop Y510p and updated to 8.1 windows

  Since the upgrade, I'm telling gel, which could last 10seconds or 10 minutes.

  Any time I restart the computer, it crashes, and the only way to kill him is to press the button works / stop.

  Checked the eventviewer and I found the following disclaimer appearing every minute:

  Log name: System
  Source: iaStorA
  Date: 20/02/2014-17:36:40
  Event ID: 129
  Task category: no
  Level: WARNING
  Keywords: Classic
  User: n/a
  Computer: DARIUS-PC
  Description:
  \Device\RaidPort0, restore the device, has been published.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
  
  
  129
  3
  0
  0 x 80000000000000
  
  7422
  System
  XXXXX
  
  
  
  \Device\RaidPort0
  0F001800010000000000000081000480040000000000000000000000000000000000000000000000000000000000000004000000810004800000000000000000
  
  

  After much research, I came to the conclusion that the ExpressCache is the cause.

  at the time wherever I've uninstalled it, issues disappeared.

  System will reboot without any problems, it will not be freez.

  Checked the following article:

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=HT074404

  Tried to re - install ExpressCache but the problem started to presist immediately, constant freezing and the message above in Event Viewer.

  Everyone knows the same problem? If you did, did you mange to solve?

  Obviously, I'm happy at this stage that frost has disappeared, but at the same time, I really would like to have full use of the system and would like to get it resolved.

  Any help much appreciated.

  Hello.

  Talked with Support and unfortunately, this seems to be a matter of HW.

  Given that I've owned only the laptop for less than 31 days I received a full refund/replacement code.

  I would say that anyone having the same problem, contact technical support and advises because that is the question to support him rather than S/F.

  Kind regards

  Darius

• Cannot initialize my SSD 16 GB internal for expresscache

  Hello

  I tried to install Expresscache after reformatting my E430. But the always prompt program my 16 GB internal SSD is not initialized. I went to disk management to initialize the disk, but it he always responded initialization fails. Diag on the SSD shows no errors.

  Help, please. Thanks in advance

  Welcome, Choychho1

  The pages below may help
  https://support.Lenovo.com/us/en/documents/ht074404
  https://support.Lenovo.com/us/en/documents/HT104581

• expresscache for the mSata SSD problems

  I have a 16 GB on a T530 mSata reader. Rebuilt my machine and I am trying to run expresscache.

  Deleted the partition on disk mSata and installed the expresscache software from this link:
  http://support.Lenovo.com/en_CA/downloads/detail.page?docid=DS035460

  but no dice. I get an error "unable to retrieve product license information. This link installs version 1.3.110.

  Can anyone help?

  TX

  found what I had in this thread
  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/ExpressCache-update-1-0-100-0-doesn-t-work/...

• Update ExpressCache 1.0.100.0 does not work

  Update my 1.0.86.0 software expressCache recently. Installation proceeded without errors, but when I used the eccmd-info comand to check the SSD was used it showed no information use. (the SSD news or reading / writing information). The comand display only the product name, level & current date. I tried all the suggestions in this area and other forums, including the uninstall & reinstall, clean the disk with DiskPart etc. commands. Nothing has worked. I was finally able to locate a copy of the 1.0.86.0 former level and I installed that - now everything works again. If you recently updated to the last 1.0.100.0 level I suggest you check if the cache works using the comand eccmd-info!

  
  

• ReadyCache + ExpressCache does not work

  I have a Win 7 64 bit SO

  My ReadyCache of SanDisk SSD 32 GB is not found by ExpressCache

  Why!

  

  the i100 is not an ssd readycache. The software you are using is the commercial version and works only with the SSD ReadyCashe part number SDSSDRC - 032G - G26, which is a SATA SSD 2.5'.

• ExpressCache does not work properly '%0' Caching problem»

  Hello

  I really need serious help

  ExpressCache rest blue curves to & 0 for always and does not work. But the program itself says 'caching '.

  According to my meter to start, I did 25 boots because I install the program.

  SanDisk readycache player is NOT in dynamic mode

  It doesn't have any partition on it

  system sees the drive and his health.

  My C drive is also a disc of sandisk SSD incidentally.

  Can someone help me how to make this Expresscache function correctly?

  How many disks is connected to the computer? Just the SSD C drive and the readycache? If so it cache never puts anything because drive C is an SSD. This solution is for HDD + SSD readycache for cache. Your C drive is already on an SSD, so there is not need to hide something on this subject.

  If you have another HARD drive connected to the computer to ensure that they are not dynamic disks, and you would have to access data or run programs that are stored on or installed on the HARD disk before any caching occur.

• ExpressCache must start with Windows?

  For the life of me, I can't find how to prevent ExpressCache to start with Windows. There is no option in the program itself, there is no entry in MSConfig, and it is not in the startup folder in the start menu.

  (1) is there a way to prevent the program from starting at startup?
  (2) if I found a way to prevent it from running, the caching service would still go in the background at all, or is it completely related to the program.

  It is not really as long as the program running at startup that bothers me, is that it triggers a message control user account I click on in order to run. Unless I completely turn user account controls, you will see the message EVERY time you start Windows.

  Any input would be greatly appreciated.

  There is no way to stop to run at startup to the top at the moment. the next version will be an option to disable automatic runs at startup. until it came out the only thing you can do is to modify the UAC to never notify.

• Confused about hard drives external and ExpressCache 1.3.0 - Important.

  Hi Slotmosta, George and GLS,

  I'm a little confused...

  I thought that 1.3.0 is supposeed to defragment only SATA disks (this should be an option!)?

  I thought that the USB devices must eject normally - wasn't this problem?

  When comes out the next ExpressCache software and * that * he will really be in trouble?

  Kindly let me know.

  TNX,

  Compumind

  It does not seem that this problem is related to defragment.

  http://forums.SanDisk.com/T5/SanDisk-ReadyCache-SSD/please-add-defrag-control-in-next-version-of-CAC...

• When released the new version of ExpressCache?

  Hey Sandisk,

  I think it's time to inform us when the update will happen,

  After all, you want users to be happy and to recommend the ReadyCache, right?

  Please let us know! I really want to try the product - seriously.

  TIA,

  Compumind

  P.S. 'Soon' is not an acceptable answer, lol. I'm sure you people know what is happening.

  Others agree with this statement? Please chime!

  He was released today

  http://forums.SanDisk.com/T5/SanDisk-ReadyCache-SSD/ExpressCache-version-1-3-0-released/TD-p/302107

• Find S/W ExpressCache

  Where can I get the software of ExpressCache for a Win8.1 h9-1351-running HP Envy?

  Drive crashed. Installed the new drive and then Win8.0 of my own CD. So, I upgraded to Win8.1.

  I ordered the CD of 8.0 HP support recovery, the software of ExpressCache would be on the CD?

  Troubleshooting Windows Update usually help in cases like this:

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-8

  Update 5 at a time, saves wear and a large number of older fustraations will take less time.

• Can I use any mSata SSD with ExpressCache?

  Hello

  I'm buying a X230i and I want to increase the performance with a SSD cache drive, as I have on my desk.

  I've been watching this disc; Kingston SSDNow v + 30 GB mS200 (http://www.kingston.com/en/ssd/s#sms200s3), that seems advantageous, that need to be or I might as well buy an SSD 'normal '...

  But it'll work in a X230i and I can use the ExpressCache software with it?

  Best regards

  Morten

  Hello

  I do not have a X230i, but I have a 220 X, and I successfully running Windows 7 and Windows an mSATA 120 GB SSD and Windows 8.0 8.0 and 8.1 of a 240 GB inside mSATA.  So I think that these drives would work in the most recent series of X230i thus, as long as it wasn't anything physically blocking a mSATA card installation.

  Kind regards

  Aryeh Goretsky

• ExpressCache 1.0.100.0 update install .dll error

  I get this error when you install the latest version of ExpressCache found here: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS035460

  "C:\Program Files\Condusiv Technologies\ExpressCache\SupportDll\ecbase.dll file cannot be found. Make sure that the file is on the target system, or is already installed.

  What can I do now?

  OK, I fixed the last number with the solution found here.

  Now, I just hope that there really is a difference when using expresscache...