Configure via missing WAN

Similar Questions

• I downloaded Adobe CS5.5 Master Suite: configuration file missing

  I don't know what to do. My school has published free number (legally) CS5.5 Adobe master collection. I downloaded all via my Adobe Downloader, but now he says that the configuration file is missing. What can I do?

  It seems that the package might be corrupted regular you get the missing file error.

  Consider re - download the package.

  You can download from direct download links available at: http://prodesigntools.com/adobe-cs5-5-direct-download-links.html

  But make sure you follow the steps mentioned on the page before you start the download.

• Can't set up wireless 'Wireless Zero Configuration is missing'

  Original title: Missing Wireless Zero Configuration

  I use Windows XP service pack 3. I used to use an ethernet cable to connect to the internet. I have just bought a wireless adapter and can't make it work. The error that says:-Question WZC failed! I don't seem to have the file on my PC Wireless Auto Configuration. Any ideas how to get it please? Thank you

  Hello

  Try the following and see if it helps.

  Method 1:

  Check if the Wireless Auto-Configuration service is enabled.

  a. Click Start, type services.msc, press on enter and then click Services.
  b. double-click the automatic Wireless Configuration service.
  c. Click Start to start the service.
  d. click on the general tab, verify that the service has not been disabled in the Startup Type box. If Yes, click Automatic to have it start when you start the computer.

  Method 2:

  a. click the Start button and then click Control Panel.
  b. If you are in category view, then click on the connection icon network and Internet, and then on the network connections icon. If you are in Classic view, double-click the network connections icon.
  (c) in the network, LAN or Internet Connections window high speed, select the icon to connect to the Local network. In the menu bar, click on file and select Properties, or simply right-click on the Local area connection icon and select properties from the context menu).
  d. in the Properties window of connection of LAN, on the general tab, click install.
  e. in the window select the component Type of the network under "The type of network component you want to install, click" click to select the icon of the Service, and then click the Add button.
  f. in the Select Network Service window, click on the diskette provided button, click the Browse button.
  g. in the window locate file, navigate to C:\Windows\Inf folder (this is a hidden folder). Click to select NETWZC. INF, and then click the Open button.
  h. in the window to install it from the disc, click on the OK button.
  i. in the window select Network Service, in the Network Service box, select Microsoft as the manufacturer, and then click Wireless Auto Configuration.
  j. click on the OK button.

  Method 3:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2: http://support.microsoft.com/kb/870702

  More information see also:

  To set up automatic wireless network configuration: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  Wireless Zero Configuration Reference: http://msdn.microsoft.com/en-us/library/windows/desktop/ms706593(v=vs.85).aspx

• Error code: 0xc0000034 in Windows 8 - start of the file Configuration data missing required information

  Hi my friend has a Samsung ativ 700 t pro (xe700T1C)

  An update came on his computer to upgrade to 8.1 windows and she accepted the update.

  When the computer has been restarted, an come blue screen error message (error Code: 0xc0000034 in Windows 8 - Boot Configuration data file necessary missing information).

  can help you with a solution?

  I have the same tablet, but I'm still on windows 8.

  see you soon

  Hello

  There is a link available now where you can upload an image from 8.1 to win without a key needed to download... You can save an ISO, create a Flash drive or burn a DVD...

  At least I save the ISO and create a flash...

  The only problem I know is you need to do this on a Win 7 machine or higher and the same 32 or 64-bit machine you make it for...

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

• H710P, configure via OpenManage?

  We have a T620 server with SAS H710P RAID controller. On our 610 we could add relief through IDRAQ, seem not to be able to do it with the 620. If I install OpenManage (we run ESXi 5.5 on the system) that I'd be able to hot plug a spare part and configure it (via OpenManage, no BIOS)?

  Thank you

  Lou

  Hi Lou,

  Yes, if you install openmanage server administrator, you will be able to configure a hot spare.

  http://www.Dell.com/support/contents/us/en/19/article/product-support/self-support-knowledgebase/Enterprise-Resource-Center/Enterprise-Tools/OMSA

  http://en.community.Dell.com/TechCenter/systems-management/w/wiki/1760

  Page 170 http://topics-cdn.dell.com/pdf/dell-opnmang-srvr-admin-v8.1_User's%20Guide3_en-us.pdf

• Custom connector - required configuration option missing [IP address]

  Hello

  I am trying to create a connector that is customized for the authentication Gemalto Ezio (DS3) server and I have a "small" problem. When I am trying to create the user on the server of the DS3, I get the error:

  ...

  d: 93df695d13ccb93f:49e2ea00:1470069724e :-8000-0000000000003723,0] [APP: IOM #11.1.2.0.0] [IDDM: 0000KSFGqmb4IvsxggfP8 ^ 1Jha2W00000M] oracle.iam.connectors.icfcommon.prov.ICProvisioningManager: createObject: error creating

  [[the user

  org.identityconnectors.framework.common.exceptions.ConnectorException: missing required configuration option [IP address]

  to oracle.iam.connectors.icfcommon.ConnectorFactory$ ConnectorConfigurator.configure (ConnectorFactory.java:336)

  at oracle.iam.connectors.icfcommon.ConnectorFactory.createConnectorFacade(ConnectorFactory.java:187)

  at oracle.iam.connectors.icfcommon.prov.ICProvisioningManager.init(ICProvisioningManager.java:113)

  at oracle.iam.connectors.icfcommon.prov.ICProvisioningManager.init(ICProvisioningManager.java:122)

  at oracle.iam.connectors.icfcommon.prov.ICProvisioningManager.createObject(ICProvisioningManager.java:267)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:601)

  at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpDS3CREATEUSER.CREATEUSER(adpDS3CREATEUSER.java:109)

  at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpDS3CREATEUSER.implementation(adpDS3CREATEUSER.java:54)

  ...

  I developed the connector following this guide: development of identity connectors using Java - 11 g Release 2 (11.1.2) and 4 next lesson of IOM which I spent a few months of training. I think I have correctly configured all the metadata.

  The Source code of my connector (alpha version) is here: https://www.dropbox.com/s/nwyr81jd9w5w7zk/DS3Connector.tar.gz

  Metadata configuration is here: https://www.dropbox.com/s/yb5pyzc4ew6j3n7/ds3-metadata-screenshots.tar.gz

  Please do you an idea what is the problem? I use the ipAddress in my resource of connector and I don't know what IPAddress means IOM. How can I solve this problem?

  Thank you very much for your help.

  Milan

  Hi, Yes, but all of these attributes are defined by me. for example, I defined in the attributes of DS3ConnectorConfiguration:

  private String keyStore = null;

  private String password = null;

  private String DS3IPAddress = null;

  private String DS3Domain = null;

  private String DS3Group = null;

  and I defined with annotations such as get/set methods: @ConfigurationProperty (order = 1, required = true, helpMessageKey = "configuration.keyStore.help", displayMessageKey is "configuration.keyStore.display"). This says for example that this property or attribute annotation is required.

  You must post these attributes in the public Sub validate().

  I don't care

  I solved my problem.

  The problem is in DS3ConnectorConfiguraiton.java. I had it as ipAddress properties, group... I created get/set methods getIPAddress(), setIPAddress (...); When I created a test application and pasted my connector on the connector server and called some test cases, I have seen this problem is in the get/set methods. I used the ipAddress property and in get/set methods, I used IPAddress (like getIPAddress with uppercase characters I and P). I renamed ipAddress as DS3IPAddress and I created the same get/set methods where the suffix (the attribute name is exactly the same). So, my get/set methods are getDS3IPAddress and setDS3IPAddress. Also, I've renamed other attributes, because after the resolution of IP address, I got error for the attributes of a group. Now, it works fine

  Of course, I got another error, but this error I can fix (it's error in my DS3Util.java...)

  Milan

• Import an element of configuration via REST API vCO

  Hello, I try to import a configuration item via the REST API of the vCO (5.5.1 device), documented here: http://pubs.vmware.com/vsphere-55/index.jsp?topic=%2Fcom.vmware.vsphere.vco_develop_web_services.doc%2FGUID-75E0F269-3D26-418E-8597-E9FC9E67C608.html

  The doc says thyou must add the request headers to set the properties of the element of the configuration that you want to import, but gives no details.  I tried a few variations but each mistake to return 400 (bad request).  For the purposes of this post, I use vCO as the customer STAYS that way.  I think it can be a problem of chickens and eggs, you have probably set a relationship category (folder) to the imported configuration item configuration item - do not know how to do this, but how otherwise he would know where to store the imported configuration item?

  Here is what I tried:

  // I have pre-defined a REST host on the vCO server that points to itself (var restHost)
  // restHost.url is https://<vco IP>:8281/vco/api
  
  var reqString = restHost.url + "/configurations/";
  System.log("Request Query: " + reqString);
  
  // Got the following content from a REST query to export a config element - this is a vanilla config element
  var xmlContent = "<?xml version=\"1.0\" encoding=\"ISO-8859-1\" standalone=\"yes\"?>\n<config-element " +
  // I've tried both omitting and including the id
  //"id=\"CB808080808080808080808080808080038A808001334613384319bad96d0cacb\" +
  "version=\"0.0.0\" >\n" +
  "<display-name><![CDATA[test_element]]></display-name>\n<atts>\n" +
  "</atts>\n</config-element>\n";
  
  var req = restHost.createRequest("POST", reqString);
  req.contentType = "application/vcoobject+xml;charset=UTF-8";
  req.setHeader("contentAsString", xmlContent);
  var response = req.execute();
  System.log("Response: " + response.toSource());
  
  
  

  httpResponse:HTTP / 1.1 400 Bad Request

  Documentation for VMware:

  1	In a client application to REST, add request headers to set the properties of the configuration item that you want to import.
  2

  Make a POST request to the URL of the configuration item objects:

  POST http://{vcoHost}:{port}/vco/api/configurations/

  If the POST request is successful, you receive the 202 status code.

  Not sure if the REST plugin vCO supports several content directly part.

  Do you need to import configuration programmatically items? If this is not the case, the simplest way would be to import the terminal using curl or shell script. Something like the following command:

  curl -i -v -k -u user:password -X POST https://10.23.12.20:8281/vco/api/configurations -F categoryId=8a978c4b46aa6b9a0146aa6d116d0008 -F file=@d:/downloads/abcconfig.vsoconf
  

  where:

  user: password - your credentials of the vCO

  10.23.12.20 - your vCO server address/IP

  8a978c4b46aa6b9a0146aa6d116d0008 - ID of the category of configuration items

  d:/downloads/abcconfig.vsoconf - path to the file containing configuration items to import

• OfficeJet Pro 8500 configuration via ethernet

  I just purchased a HP Officejet Pro 8500 Wireless and want to connect it to my wired ethernet network.  I do this type of installation because I believe that it will be more reliable and faster connection.  In addition, my printer is on the same desktop as my iMac and Time Capsule.  I plan to connect the printer through ethernet to the CT, which is connected to my iMac via wired ethernet.  The problem I have is that all gigabit ethernet ports, three on the TC are already in use so I would need to add an ethernet switch (or do I need a hub?) in the equation (maybe one like this on Amazon http://http://amzn.to/9zgsOJNetgear unit).  Will I encounter problems if I connect the printer to my network using ethernet in this switch? This configuration will allow me to print wirelessly on my LAN to my Macbook Pro and my guests to be able to do the same to their Mac or PC?  What about printing from my iPad when comes out the 4.2 update software (which allows to print wireless in native mode)?

  Thanks for the help!

  CASS

  Hello

  Adding a Switch or a hub to your network should not cause any problems, do not add a second router in error because this will cause multiple network problems.

  I hope this makes you in the right direction.

• Change to the subject: the configuration via the mac terminal settings

  Hello

  I administer more than 140 computers mac, with firefox installed. Unfortunately, it seems like a daily appearance when a user calls and says that firefox is updated, listen to which they can't because they are not administrator accounts.
  Now, I use apple remote desktop to turn off auto-updated for many other applications such as software update, microsoft office and adobe. Unfortunately since firefox does not use a standard plist file on mac I can't use default to write preference remotely.
  Question: Is there a way to write to the config of firefox via command line, so I can turn off auto-updated mass instead of having to touch to each computer and do change in the GUI?

  Thank you!

  Use a mozilla.cfg file in the Firefox program folder to lock the prefs or specify default values.

  Place a local file - settings.js in the folder by default/pref where you will also find the channel - prefs.js to specify using mozilla.cfg file.

  pref("general.config.filename", "mozilla.cfg");
  pref("general.config.obscure_value", 0); // use this to disable the byte-shift
  

  See:

  • http://KB.mozillazine.org/Locking_preferences

  You can use these functions in mozilla.cfg:

  defaultPref();  // set new default value
  pref();         // set pref, but allow changes in current session
  lockPref();     // lock pref, disallow changes
  

  lockPref("app.update.enabled", false);
  

  • http://KB.mozillazine.org/app.update.enabled

• HP ENVY 750-170se: cannot access the RAID configuration via Ctrl + i on startup

  I activated the RAID in BIOS > Storage Options > SATA emulations.

  There are 2 drives HARD correspondents attached to the SATA 2 ports & 3.

  At startup the Intel Rapid Storage screen shows the two discs. It shows the prompt to hit "Ctrl + I" to enter setup.

  However: when I hit, stand or mash Ctrl + I, before, during and after the screen from the IRS, it never penetrates RAID installation.

  What keeps me to enter RAID configuration menu?

  Is there some SATA ports I need the HARD drive to be attached to the?

  Motherboard is the model 2B4B, verson A0.11 BIOS

  Based on this post I tried to use Intel Rapid Storage to make the RAID. TSRI was not installed/available in Windows so I donwloaded it... during the installation I was told there was a newer version already installed (which is weird because I couldn't access it).

  TSRI in Windows made the RAID volume. No need to enter during POST/boot.

• Configure icon missing from tdm great importer complement

  I downloaded and installed TDM Excel Add-In for Microsoft Excel Version 3.5.1 from this link http://www.ni.com/example/27944/en/

  The said http://www.ni.com/white-paper/4906/en/ user guide "...". Click the importing TDM configuration. "I use Excel 2010.  I don't see an icon to configure importing TDM.  All I see in the Ribbon from Add-in's import and the words.  I tried to uninstall, reinstall, reboot, removing the add-in and then add again.  Still don't see not the icon set. When I click the icon import I get only the open file dialog box.  Can anyone offer any suggestions?  Is there a forum dedicated for this additional support?   Thanks in advance!

  

  

  that's it (Note: I imported example Data.tdms events after running the example 'TDMS write events Data.vi' in 2013)

• SQLNET.ora Network Configuration file "missing parameters".

  Hello gurus;
  
  Earlier I create sqlnet, ora by NETCA
  My SQLNET.ora contains following information only...
  
  
  sqlnet.ora # Network Configuration file: /u01/app/oracle/product/10.2.0/db_1/network/admin/sqlnet.ora
  # Generated by Oracle configuration tools.
  
  NAMES. DIRECTORY_PATH = (TNSNAMES)
  
  
  * > > Help > > *.
  why he did not show all parameters? Here is something wrong?
  I need to set SQLNET. AUTHENTICATION_SERVICES = NONE

  952909 wrote:
  Hi EdStevens

  Not able to connect to the database without entering a user name and password.

  Yes, we know. You said, in almost all positions, you did on this subject. We got that. Believe me, we understand that. Can we move on to solve your problem?

  [oracle@localhost ~] $ sqlplus /.

  SQL * more: Release 10.2.0.1.0 - Production on sat 22 dec 19:12:30 2012
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  ERROR:
  ORA-01017: name of user and password invalid. connection refused

  Because everything counts OS logged as that doesn't have an account AUTHENTIFIE of BONES in the database.

  but I can connect like this,

  [oracle@localhost ~] $ sqlplus

  SQL * more: Release 10.2.0.1.0 - Production on sat 22 dec 19:12:17 2012
  Copyright (c) 1982, 2005, Oracle. All rights reserved.

  Enter the user name: ops Sham $
  Enter the password:
  Connected to:

  Because, despite the "ops$"... ops$ feint isn't an authenticated OS account. This is a database of authenticated account. It's only a database of authenticated account because you gave it a password. From your previous post to Justin:

  -quote from the previous post to start-

  SQL > CREATE USER ops$ sham IDENTIFIED EXTERNALLY.
  Created by the user.
  -suspend - quote

  OK, at this point, you have an authenticated os account "$ops Sham".

  -quote to continue-
  SQL > GRANT CONNECT TO the Sham ops$;
  Grant succeeded.
  -suspend - quote

  Now, the operating system account 'sham' should be able to connect with a simple "sqlplus / '.

  -quote to continue-
  SQL > grant dba to simulacrum of ops$;
  Grant succeeded.
  -suspend - quote

  Now, anyone who uses the operating system account 'sham' can connect without a password and have all the privileges listed in the role of "dba".

  -quote to continue-
  SQL > alter the simulacrum of $ ops user identified by shamos.
  Modified user.
  -end quote-

  But now change you your account "$ops Sham" and gave it a password. OPS$ feint is therefore more than a bone authenticated account. It is now a database authenticate the account, but with a rather misleading name. At this point, if you are trying to connect as "sham of the ops$", you will need to provide a password.

  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
  With partitioning, OLAP and Data Mining options

  Note: most web links either saying, we can choose to connect with DB.
  I want to know the difference why this sqlplus command / error display

  Because you're tying to use authentication with an operating system account that is not an operating system os authenticated account in the database. Put "ops$" on the name of the account is NOT what makes an authenticated os account. What makes authenticated os sets the account as "identified on the outside. If you create as 'identified by somepassword', OR if you CHANGE to 'identified by somepassword' then it is NOT authenticated os.

• How can I configure via Bluebeam PDF to preview in the preview of Windows 8 pane?

  In windows 7, you can set the Preview file tree pane to preview a PDF file when you click on it once.

  In windows 8, this does not work, even when you set the view organize in the preview pane and the player to the default player.

  All solutions?

  Bluebeam using for PDF files.

  Thank you very much!

  Thank you!

  Your questions:

  Thanks for posting the request in Microsoft Community Forums.

  1. you have to any other PDF Reader installed on your computer such as Adobe Reader?

  > The group uses BlueBeam, although if there is no solution to BlueBeam on Windows 8, I'll ask if Adobe Acrobat Reader is a viable alternative

  2 are you able to view the icon on the right side on the preview pane?

  > The file icon is there with the image of default BlueBeam on all PDF files. No image of the file as an icon is visible.

  3 do you have. what Bluebeam version installed?

  > Xtreme Bluebeam

  4 is this problem specific to Bluebeam? Are you able to work with other programs to drive?

  > Look into it and report back.

  I suggest you to check if you are using the latest version of Bluebeam on the computer.

  > Yes, the latest version of BlueBeam Xtreme is installed.

  You can try the multiple steps that are proposed in the article provided here.

  http://communities.Bluebeam.com/showthread.php?73-thumbnail-preview

  I also suggest to display the query in Bluebeam forums for more support information.

  http://communities.Bluebeam.com/

  > :) Have done in the same time, I posted this Q here! (Don't know if the question was one for Windows 8 or BlueBeam, so I tried to cover my bases... :)))

  Hope this information helps.

  > Thank you!

  I'll look in the above resource links and post an update. It would be swell if you check also come back here as if I find something relevant and I have an another Q I would love your comments!

  Thank you very much!

• My c6150 printer is configured via a computer P 7. My laptop Windows XP networking will not be printed.

  How to locate a X 86 driver to install on W7 computer? According to me, which will facilitate printing remotely from my XP laptop.

  Try adding an option of the device using the installation of HP after disc installed the software. This, even if Complete installation has already been used.

• tcObjectNotFoundException error during the configuration via the API of the IOM

  Hello

  I'm trying to provide resources using the client API IOM. I use the following code which generates the exception mentioned after the code snippet:

  *******************************Code*******************************

  java.util.Hashtable env = new java.util.Hashtable ();

  env.put (oracle.iam.platform.OIMClient.JAVA_NAMING_FACTORY_INITIAL,

  oimInitialContextFactory);

  env.put (oracle.iam.platform.OIMClient.JAVA_NAMING_PROVIDER_URL, oimURL);

  oracle.iam.platform.OIMClient client = new oracle.iam.platform.OIMClient (env);

  Thor.API.Operations.tcUserOperationsIntf userIntf = (Thor.API.Operations.tcUserOperationsIntf.class) client.getService;

  Thor.API.Operations.tcObjectOperationsIntf objIntf = (Thor.API.Operations.tcObjectOperationsIntf.class) client.getService;

  Thor.API.Operations.tcFormInstanceOperationsIntf formIntf = (Thor.API.Operations.tcFormInstanceOperationsIntf.class) client.getService;

  Thor.API.Operations.tcProvisioningOperationsIntf provIntf = (Thor.API.Operations.tcProvisioningOperationsIntf.class) client.getService;

  Thor.API.Operations.tcUserOperationsIntf userOper = (Thor.API.Operations.tcUserOperationsIntf.class) client.getService;

  java.util.Hashtable mhSearchCriteria = new java.util.Hashtable ();

  Hashtable ObjectHash = new Hashtable();

  objectHash.put ("Objects.Name", "ITAX_GTC");

  Data com.thortech.xl.vo.ResourceData = userIntf.provisionResource (Long.parseLong (userId), objectKey);

  long userObjectInstanceKey = Long.parseLong (data.getOiuKey ());

  long objectInstanceKey = Long.parseLong (data.getObiKey ());

  Hashtable InputHash = new Hashtable();

  Fill out the entry below with data from object

  for (int b = 3; b < row.length; b ++)

  {

  inputHash.put (header [b], [b] row);

  }

  Sets the data object

  formIntf.setProcessFormData (objectInstanceKey, inputHash);

  *********************************************************************************************

  Thor.API.Exceptions.tcObjectNotFoundException

  at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)

  at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)

  at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)

  at Thor.API.Operations.tcUserOperationsIntf_e9jcxp_tcUserOperationsIntfRemoteImpl_1035_WLStub.revokeObjectx (unknown Source)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)

  to $Proxy2.revokeObjectx (Unknown Source)

  at Thor.API.Operations.tcUserOperationsIntfDelegate.revokeObject (unknown Source)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  to Thor.API.Base.SecurityInvocationHandler$ 1.run(SecurityInvocationHandler.java:68)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

  at weblogic.security.Security.runAs(Security.java:41)

  at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs (weblogicLoginSession.java:52)

  at Thor.API.Base.SecurityInvocationHandler.invoke (SecurityInvocationHandler.java:79)

  to $Proxy3.revokeObject (Unknown Source)

  at com.infotech.tra.organization.RoleAssignment.ProvisionResources(RoleAssignment.java:1013)

  at com.infotech.tra.organization.RoleAssignment.main(RoleAssignment.java:48)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at org.eclipse.jdt.internal.jarinjarloader.JarRsrcLoader.main(JarRsrcLoader.java:56)

  Caused by: Thor.API.Exceptions.tcObjectNotFoundException

  at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.revokeObject(tcUserOperationsBean.java:3184)

  at Thor.API.Operations.tcUserOperationsIntfEJB.revokeObjectx (unknown Source)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)

  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)

  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)

  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)

  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)

  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)

  at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)

  at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)

  at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)

  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)

  at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)

  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)

  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)

  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)

  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)

  at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)

  to $Proxy344.revokeObjectx (Unknown Source)

  at Thor.API.Operations.tcUserOperationsIntf_e9jcxp_tcUserOperationsIntfRemoteImpl.__WL_invoke (unknown Source)

  at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)

  at Thor.API.Operations.tcUserOperationsIntf_e9jcxp_tcUserOperationsIntfRemoteImpl.revokeObjectx (unknown Source)

  at Thor.API.Operations.tcUserOperationsIntf_e9jcxp_tcUserOperationsIntfRemoteImpl_WLSkel.invoke (unknown Source)

  at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)

  at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)

  to weblogic.rmi.internal.BasicServerRef$ 1.run(BasicServerRef.java:522)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)

  at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)

  at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

  Add the line before retrieving the key of the object:

  set.goToRow (0); assuming that one record is returned in the result