Configuring reports FNMS

Similar Questions

• Database Configuration report

  Hello
  
  Pls advice me how to get the 'Configuration report of database"on oracle 10g
  
  I thank you,
  
  Jagath

  Extraction of the details of database 10g

• Failed to configure reports and forms Oracle 11 GR 2

  Mr President.
  I have Oracle 11 g db installed on my laptop.
  I have Windows 7 Home Premium 64 - bit installed on it.
  I installed the server version Weblogic 12 c (12.1.1) using the generic.jar in console mode installation program using the command
  Java-Xmx1024m-jar wls1211_generic.jar
  
  Having correctly installed weblogic server and also have created a domain.
  Now, I try to install Oracle Forms and reports 11g R2 on this machine...
  Have downloaded the 64 bit version...
  The same is installed, but stops on the configuration of the screen and everything is not going further.

  The tnsnames.ora file must reside in the ORACLE_INSTANCE\config directory

  Hope this helps you :)

  If someone useful or appropriate please mark accordingly.

  Concerning
  Carlos

• When you configure Reporting ADG, fnd_adg_utility.switch_rpc_system_on is do failure, why?

  My environment:

  OS: OEL 5, 8-64-bit

  Application version: R12.1.3

  DB version: 11.1.0.7.0

  Input TNS:

  PRIM =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = tcp (PORT = 1528))(HOST=primarydb.xyz.com))

  (CONNECT_DATA =

  (SID = PRIM)

  )

  )

  SQL > create the primary public database link using "PRIM";

  Database link created.

  SQL > START

  fnd_adg_utility.register_connection (p_type =

  fnd_adg_utility. C_CONNECT_STANDBY_TO_PRIMARY,

  p_link_name = > 'primary.xyz.com ',.

  p_link_connstr = > 'PRIM');

  end;

  /

  PL/SQL procedure successfully completed.

  SQL > execute fnd_adg_utility.switch_rpc_system_on;

  ERROR on line 1:

  ORA-20001: ADG - ERR 27: validate the connection - unable to connect through the link

  [Standby-> ORA-00933 primary: not correctly completed SQL command]

  ORA-06512: at the 'APPS '. FND_ADG_EXCEPTION', line 206

  ORA-06512: at the 'APPS '. FND_ADG_UTILITY', line 1235

  ORA-06512: at the 'APPS '. FND_ADG_UTILITY', line 2122

  ORA-06512: at the 'APPS '. FND_ADG_UTILITY', line 2547

  ORA-06512: at line 2

  I am following (Doc ID 1070491.1), to set up Reporting ADG.

  How to troubleshoot? why its happening?

  Kind regards

  Raj.

  Hi all

  Finally found the solution to the problem,

  The question because the dblink, our dblink is added with the db_domain name, such as primary.xyz.com

  Refered below document to remove the name of db_domain dblink.

  Create the link of database without end domain name [ID 462024.1]

  Now, the validation is successful.

• Web server plug in the configuration of Reporting and analysis

  Hi Hyperion gurus,
  
  Please suggest: -.
  
  at the time of Configuring Reporting and analysis (taken from Web server in the configuration of Reporting and analysis)
  
  What Web server I would prefer to use for planning and working space (Apache HTTP server/IIS HTTP Server) I'm having IIS installed on my environment.
  
  If you're suggesting IIS: HTTP Port?
  
  He suggested that if I select the Apache HTTP Server Port: 19000
  
  Somewhere I read the required planning installed IIS server that's why I'm confused.
  
  
  Thanks for the reply in advance...
  
  
  Thank you
  Kumar N

  Hello

  It is up to you what you choose, most people go with the apache plugin and would go for this one, it is much more robust and rarely there at - it problems with it. The apache option will install all necessary files.

  You've probably read that you needed IIS to use EPMA.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Method of Report.Save, the report has been made in a new path, but why is the empty file?

  Hallo,

  I have a problem to save the report file in a new way.

  In my code, I used the Runstate.Report.Save(newpath, overwrite, 0) method to save the report.

  And after the excution of the test, I can find the file of report in the right place, but if I open it, it's empty, I mean, there's nothing in this report.

  Someone has an idea? Where is the problem? And what I could do?

  Thank you!

  Cabio

  Hi Cabio,

  Before answering your question, I would like to let you know that you can configure the path to the report file in the report file path tab report options.  You can choose from several options, including by specifying an expression that is customized for the report path.  This will allow you to customize where the report is saved without changing code.

  If this isn't meeting your needs, the problem you're likely to have is that you access report until the report is actually produced.  To access the report object after it has been populated, replace the ProcessCleanup callback, which runs after the report has been generated.  (see the example of navigation PreUUTCallback for an example of substitution of a reminder.

  Note: if you use TestStand 2012, this method will not work unless you configure Report Builder for not using a new thread.  You can configure this option in the treatment of dialogue by selecting the checkbox options more results.  If you do not want to use a new thread, you can access the report by changing the sequence of AddUUTReportAndSave in ReportGen_ATML.

• HP Envy 5540: Printer Hp Envy 5540 randomly printed the Network Configuration Page

  Hello!

  I bought this printer about a month ago. Set up the connection to the printer wireless with my wifi, and my understanding is that the printer is protected like my wifi and use the same password in order to print something. I kept my printer connected and 'standby mode' since I put in place. The night last at about 23:00 when I was in bed, the printer turned on randomly and printed a "wireless network configuration page" that has had a lot of information, including the IP address and listing my name wifi as well as the names of my neighbors wifi in the surrounding apartments.

  I'm trying to understand why this printed, because I certainly did not do. Anyone have access to my wifi, or has someone may simply try to print something and selected my printer as it should appear on the "list available connections on the computer of anyone, given that the printer is turned on? How could they print this sheet of network configuration if my printer is password protected?

  I'm mostly concerned about someone who has access to my internet if they could print this page somehow, but maybe it happened just when they tried to connect to it, and it did not work while trying to fix MY printer?

  I would appreciate any idea on the issue.

  Thank you!

  Hi @printerprob5540,

  Welcome to the HP Forums!

  I saw your post on how your HP Envy 5540 randomly print a Network Configuration Page. I'm happy to help with this problem!

  I find it very strange considering the only way to print the Network Configuration Page, AFAIK, is with the following steps:

  • Make sure that there are size A4 or US Letter, unused, plain paper in the feeder.
  • On the printer Panel, drag the screen to the left and then press Setup.
  • Touch tools.
  • Drag upward on the screen and then tap Network Configuration report.
  • A Network Configuration Page prints up to three pages of information.
  Figure: Example of a Network Configuration Page

• Report on the performance of the server - cannot display the Page in generated by the e-mail server

  Server 2003 for Small Business Server, the operating system generates the following email:

  	The page cannot be displayed
  An error has occurred on the page you are trying to view.
  To work around this problem, perform the following steps. After each step, try again to access the page. Make sure service MSSQL$ SBSMONITORING is started. Make sure that the server is not low on memory or disk space. Restart the server. Check that the server is functional and that there is no systemic problem. Run configure reports and alerts task in the list of the Monitoring and Reporting Server management tasks.

  A corresponding system event is logged:

  Event type: error
  Event source: ServerStatusReports
  Event category: no
  Event ID: 1
  Date: 07/08/2012
  Time: 06:03:21
  User: n/a
  Computer:
  Description:
  Server status report:
  URL: http://localhost/monitoring/perf.aspx?reportMode=1&allHours=1
  Error message: timeout expired.  The delay before the end of the operation or the server is not responding.
  Stack trace: at System.Data.SqlClient.SqlConnection.OnError (SqlException exception, State of TdsParserState)
  at System.Data.SqlClient.SqlInternalConnection.OnError (SqlException exception, State of TdsParserState)
  at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning)
  at System.Data.SqlClient.TdsParser.ReadNetlib (Int32 bytesExpected)
  at System.Data.SqlClient.TdsParser.ReadBuffer)
  at System.Data.SqlClient.TdsParser.ReadByteArray (Byte [] buff, Int32 offset, Int32 len)
  at System.Data.SqlClient.TdsParser.ReadValue (_SqlMetaData md, Int32 length)
  at System.Data.SqlClient.TdsParser.ProcessRow (_SqlMetaData [] columns, buffer Object [], Int32 [] map, Boolean useSQLTypes)
  at System.Data.SqlClient.SqlDataReader.PrepareRecord (Int32 i)
  at System.Data.SqlClient.SqlDataReader.GetValue (Int32 i)
  to Microsoft.UpdateServices.Internal.DatabaseAccess.GenericReadableRow.ReadRow (IDataRecord record)
  to Microsoft.UpdateServices.Internal.MultipleResultSetsSPHandler.ExecuteStoredProcedure (DBConnection connection)
  at Microsoft.UpdateServices.Internal.GenericDataAccess.ExecuteSP (String spName, Int32 queryTimeoutInSeconds, DBParameterCollection args, Manager of IExecuteSPHandler)
  at Microsoft.UpdateServices.Internal.GenericDataAccess.ExecuteSP (String spName, DBParameterCollection args, Manager of IExecuteSPHandler)
  at Microsoft.UpdateServices.Internal.DataAccess.ExecuteSPMultipleResultSets (String spName, args, Type [] resultTypes DBParameterCollection)
  at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccess.ExecuteSPCompleteUpdatesResult (String spName, DBParameterCollection args)
  at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccess.ExecuteSPGetAllUpdates (String preferredCulture, Int32 approvedStates, fromSyncDate DateTime, DateTime toSyncDate, Guid [] updateCategoryIds, Guid [] updateClassificationIds, Int32 publicationState)
  at Microsoft.UpdateServices.Internal.BaseApi.Update.GetAll (ApprovedStates approvedStates, fromSyncDate DateTime, DateTime toSyncDate, UpdateCategoryCollection updateCategories, UpdateClassificationCollection updateClassifications, ExtendedPublicationState publicationState)
  at Microsoft.UpdateServices.Internal.BaseApi.Update.GetAll (ApprovedStates approvedStates, fromSyncDate DateTime, DateTime toSyncDate, UpdateCategoryCollection updateCategories, UpdateClassificationCollection updateClassifications)
  at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetUpdates (ApprovedStates approvedStates, fromSyncDate DateTime, DateTime toSyncDate, UpdateCategoryCollection updateCategories, UpdateClassificationCollection updateClassifications)
  at Microsoft.SBS.UpdateServices.DataProvider.GetScheduledUpdates)
  at Microsoft.SBS.UpdateServices.StatusPage.Utility.GetStatusItems)
  at usage.frmPerf.PopulateStatusItems)
  at usage.frmPerf.renderReportWorker)
  at usage.frmPerf.renderReport)

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Does anyone know how I could go about fixing this? Thanks in advance!

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Configuration without wire - HP Laserjet P1100w with Mac OS 10.7.5

  Ok

  I have the most recent updates of software through my Mac. I am connected via USB but unable to connect via Wifi.

  What is going on?

  Hi @rkcampbell,

  By your post, I see that you cannot set up the printer on the wireless network. I can help you.

  Make sure that Safari is set as default browser. (sometimes the SAP will not open if it is not set by default)

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Reset the printer first to clear the previous network settings.
  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  (hold down the x key and when the printer makes a noise to let go of taken)

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Officejet 6500)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  Check your network encryption type.

  Go, go to the Apple/system preferences/network/click on the button advanced/double click on the name of the network. (watch the WEP or WPA)

  Check the network password.
  In the Apple menu, click on Go, selection of applications, utilities, Keychain Access, double-click the name of the network,
  Check the show the password box, type your Mac password to see.  (some networks have a password shortcut configuration)

  And then double-click the P1102w printers & scanners.

  Open the utility.

  Click Printer Setup.

  Click Config to HTML.

  This should open the Web built-in to the printer server.

  Click the network tab.
  Click on wireless in the list on the left.
  Under Communication Mode, click Infrastructure.

  Select your network SSID from the list of available network names (SSID), then click on the< button="" so="" the="" network="" name="" moves="" over="" to="" other="">
  In the Safe Mode pop-up menu, under authentication, click WEP, WPA/WPA2 or open. Your selection depends on which wireless security protocol using your network.

  Make sure that you select hexadecimal or alpha according to your password. (very important)

  Apply the settings.

  In the confirmation box (changes have been registered), click OK.

  You should get a solid blue light on the printer shortly.

  All we have to do is remove the USB driver and add the network driver.

  Click on the Apple.
  Click on System Preferences.

  Click the Printers & Scanners.

  Select the printer, and then click the sign - to remove the printer. (USB driver)

  Unplug the USB cable.

  Then click on the + sign and select the printer from the list and click Add. (Hello P1102w)

  Test the printer.

  If you have problems with the opening of HTML configuration, then perform the following steps:

  Close all applications.

  In the Apple menu, click on Go, computer, MAC hard drive, library, Printers, HP, LaserJet, click the folder for your printer, click browser EWS / config HTML, click on the network tab, click on wireless on the left and fill out your information. (Make sure infrastructure is selected) Apply the settings.

  Then, unplug the USB cable and remove the USB driver and add the network printer. Make sure that this shows that the name of the printer.

  Test the printer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• How can I configure to print wirelessly on a Mac

  Hi guys,.

  I recently bought the HP Laser jet P1102w.  I took the printer on location work and used for the first time.  It was a process of soimple of the printer and automatically downloaded and installed MAC software.

  As we were out of the office, us were not connected to the wireless network and was therefore not able to configure the printer to the netwrok.

  Now that we're back in the office, I want to set up the printer so that it can be used without wire of all devices connected to the network.

  I can't find how to do on MAC OS X 10.6.8.  I removed the printer from the Print & Scan utility and tried to install it again when you are connected to the network, however I am still only able to print when connected by USB.

  I understand that I can print via the device connected to the network, but rather would set it up to do all together with wireless.

  Please can you point me in the direction to find the instructions for set up?

  Any help is most appreciated.

  Hi @EI2014 ,

  Make sure that Safari is set as default browser. Sometimes, the built-in Web server will not open in other browsers.

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Claire on the former network settings on the printer.

  Turn the printer off, press and hold the wireless button and cancel (x button) while turning the printer on and do not release both buttons until the printer stops making the noise.

  Print a configuration report and check the SSID address and IP are disabled.
  Print a Configuration Page.

  Plug the USB cable from the printer to the Mac.

  Go to Apple, system preferences, print and fax.

  Double-click the P1102w.

  Open the utility.

  Click Printer Setup.

  Click config HTML.

  This should open the Web built-in to the printer server.

  Click the network tab.
  Click on wireless in the list on the left.
  Under Communication Mode, click Infrastructure.

  Select your network SSID from the list of available network names (SSID), then click on the< button="" so="" the="" network="" name="" moves="" over="" to="" other="">
  In the Safe Mode pop-up menu, under authentication, click WEP, WPA/WPA2 or open. Your selection depends on which wireless security protocol using your network.

  Make sure that you select hexadecimal or alpha according to your password. (very important)

  Apply the settings.

  In the confirmation box (changes have been registered), click OK.

  You should get a solid blue light on the printer shortly.

  All we have to do is remove the USB driver and add the network driver.

  Click on the Apple.
  Click on System Preferences.

  Click the print and fax.

  Select the printer, and then click the sign - to remove the printer. (USB driver)

  Unplug the USB cable.

  Then click on the + sign and select the printer from the list and click Add. (Hello p1102w)

  Test the printer.

  If you have problems with the opening of HTML configuration, then perform the following steps:

  Close all applications.

  In the Apple menu, click on Go, computer, MAC hard drive, library, Printers, HP, LaserJet, click the folder for your printer, click browser EWS / config HTML, click on the network tab, click on wireless on the left and fill out your information. (Make sure infrastructure is selected) Apply the settings.

  Remove the USB driver, then add the network printer.

  Test the printer.

  If you need help, let me know.

  Good day!
  Thank you.

• Product configuration... Please wait and then nothing!

  Hello

  I had my HP LaserJet MFP M175 np 100 for nearly two years.  It has been implemented for almost the same two years without problem.  Recently, I tried to add two new laptops to wireless and the majority of wireless laptops connected started having problems printing.  In addition, all the IPAD is connected to the wireless printer could no longer find the AirPrinters printer.

  So I tried to uninstall the driver of any PC laptop, so that I could start over completely.  Now I'm trying to place the main laptop on the connection and when I install the driver with the CD for the printer comes with, it goes through all the steps up to 'Install '.  When he arrives to install and has written to connect to the printer and the PC, I connect the laptop via USB, and then the login step 100%.  The next screen says "configuration...". Please wait "."   Then the meter never passes 15% and wrote the error message that appears: "unable to communicate lease to ensure that your PC and the product are connected via the USB cable and that the product is on and ready."

  Many times I reinstalled the software I've never had this constant message.  I tried on another laptop and it still gave me the same message on that one.  Can someone help with this error message?

  Help, please!

  Thank you!

  Hi @ChristiC ,

  I understand that you cannot set up the printer on the wireless again. I can help you today.

  If the printer is in an error state, it will not be recognized on the computer.

  Power cycle the printer.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Restore the default settings of the network printer.

  • Press the Setup button. (key)
  • Select the network configuration Menu.
  • Then select default settings.

  Print a configuration report to ensure that the IP address is 0.0.0.0 and the SSID is disabled.

  Go to the install button (key) on the printer, arrow to the reports on the right, select config report.

  Check Device Manager to see if the USB printing support has been installed for the printer or with the name of the printer, under Bus USB controllers. How to make in the Windows Device Manager?

  Let me know how the printer is listed, or if you have exclamation points.

  If you have an exclamation point on the printer, right click and update the printer drivers.

  If the pilot will not be updated or you have a composite USB or an unknown device, try and update the driver, if it will not, right-click and delete the entry.

  If the printer is not listed, or would not be updated, unplug the USB cable and run the uninstaller from the CD.

  I disable all the start up programs and temporarily disable the Antivirus software to see if there is a program to interfere in the background. How to use MSCONFIG. Click the Startup tab and click Disable all.

  Then download, save and run the latest drivers. Drivers HP LaserJet Pro 100 color MFP M175nw.

  Test the printer.

  Then you need to go back and enable startup programs and turn on the Antivirus software.

  What operating system you use on computers? How to find the Windows Edition and the Version on your computer.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• Data of the monitoring report: FSMService

  Hi all
  I have successfully build different services with the host group. I can see the details of the Service with the content engine virtual and everything seems fine. But when I now try to run a report using the monitoring: FSMService as a context parameter, for example the Module VMware Virtual Machines configuration report, I have all shown data if I use one of my construction services.
  If I use the build already in virtualization Service, it shows me all the VMS, but my goal was to report according to the accumulation of services with the Service constructor. Could this be something tha service accumulate shows machines (host)?
  Help, please.
  Kind regards
  hEINER
  SystemInfo: vFogLight 6.5 on Windows Server 2008 R2 64 bit

  Hello hEINER,.
  My suggestion would be to open a support case to diagnose the issue further.
  Concerning

• Video tutorial on Installation and Configuration Forms11gr2 (development and deployment)

  Dear Exparts

  Nice day.

  I'm going to install and configure (reports, webutil etc..) Oracle Forms11gR2 (11.1.2.2) for development and deployment.

  I want to make everything fine. So, before you start I want see tutorial for all this work).

  Can someone help me? (Team Viewer also available on request.) Video tutorial is the first choice.

  Thanks for your time.

  Ask2Learn

  Asked to know wrote:

  Thanks for the link.

  Can you please guide on the development and deployment?

  No patch needed/mendetory for the 64-bit version?

  Ask2Learn

  Hello Ask2Learn,

  Mode of development is fear that the characteristics of the development environment and mode of deployment is for most of the features of the production environment.

  Select any type and click Next and you will see the list. Web search for each components for more information.

  A few mandatory path for 64-bit according to the version of the OS.

  Please check support.oracle.com

  See also the list bit.

  

• How to stop BI Publisher Auto Refresh reports

  Hi Experts,

  I'm new to BI Publisher. I use BI Publisher Version 11.1.1.7. to configure reports for Oracle Identity Manager.

  My requirement is simple, when I pass a parameter in the user name field and then when I click on the "Apply" button, reports should be displayed.

  But at the present time, all user records are displayed without any parameter. I should stop showing all records. And reports should be displayed only when I click the button apply.

  Quick help here could be very useful and appreciated.

  Many thanks in advance,

  Sandy.

  In the properties of the report (not data model)

  You simply uncheck the checkbox for automatic execution.

  

  

  hope that helps.

• set up help entry report

  Hello

  I have a parameterized report of entry which accepts the virtual computer object as input and displays serveral metric for this virtual machine.

  I have a requirement now to create the same report, which will accept a Service [with several machines virtual objects inside] and will generate the same level of VM for each object settings information in the service.

  any help on how this is possible would have me much appericiated

  Thanks in advance,

  Eli

  Hi Eli,

  The challenge here is that your original input configurable report accepts virtual computer object as input.

  This means that the report expects a single VMWVirtualMachine object as input and displays serveral metric for this virtual machine.

  A Service contains a list of VMWVirtualMachine objects. You can drag a report can be set from this list and select a view that accepts a list of virtual machines as input. But you cannot select a view that accepts a single virtual machine as input, because a list of virtual machines does not correspond to a single virtual machine.

  The only way I can think to work together in these reports is to define a view of the iterator in WCF that accepts a list of virtual machines as input, and then iterates over each virtual machine, by displaying your VM for each reportlet.

  You start by ensuring that your VM Properties report helped "share this report and allow it to be included in other reports.

  Then use the WCF (Configuration/definitions) editor to add a view of the iterator, and configure it like this:

  

  The view "iterates" would be set for reports of unique Virtual Machine that you created at the start.

  Once you have saved this point of view, you can drag your FSMService parameterized report "VMWare Virtual Machines" and select Interator component as the view target.

  The report must then browse each VM in the chosen Service, showing your VM report for each of them.

  If your Service is customizable, you can select a different Service and report will iterate on virtual machines in the new Service as needed.

  Kind regards

  Brian Wheeldon