Connect 3 wire sensor in correct way NI 9209

Similar Questions

• Arabic font, it is not written in the correct way alphbet is not connected and he writes from left to right.  How can I solve this problem?

  Arabic font, it is not written in the correct way alphbet is not connected and he writes from left to right.  How can I solve this problem?

  CS6 and below: How to access the features of Arabic and Hebrew in Photoshop CS6 - YouTube

  Creative cloud. CC to CC 2015:

  First install the value in the parameter of English/Arabic language: change the language setting of your Cloud Creative applications

  Then enable Middle Eastern features in Photoshop: How to write in Arabic in Photoshop CC (and other adobe programs)

  I would like to know if it works.

  Gene

• Re: Portege Z30: Fingerprint software does not, the connection with the sensor fails

  Hello to you all,.

  I have a great fun for you guys. If you're curious, it's here...

  I just bougt garage a portege Toshiba Portege Z30t-A-126 PT24CE-01400HFR
  Nice machine but SSD is too small, so I changed the original SSD 256 to a 512.

  Reinstalled Win7 completely without any pb.

  Just a pb in fact: the footprint software does not work.
  When I hliant, it fails and says "unable to connect with the sensor.

  In french "fingerprint recognition."
  Unable connect the sensor.

  But when I check the Device Manager computor it says that everything is in place and ongoing execution, validity (WBF) (PID = 0010) sensors works very well and the latest version of the driver is installed.
  (I downloaded the form driver toshiba Web site.) The name of the driver is fp - sw - 20140115084521.zip)

  Then? What's not?

  I spent hours searching the web and tried everything I could. Reinstalled a thousand times the drivers, software, tried other drivers... But there is no way that I can fix it.
  It's really annoying...

  Can someone help me please? Have you an idea? I'm stuck...

  Thanks in advance. :-)

  Hello

  This issue of the fingerprint has been described in another thread.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=81261

  You should be able to solve the problem installing the chipset driver.
  Another user said, an installation of Proset Ethernet drivers/software was necessary to get the problem resolved. But to be honest that I put t think that missing Proset utility would cause the question

  However, check it out.

  Your comments would be appreciated

• Correct way to user applsyspub unexpired

  Hi all
  
  System
  OUL5x64
  DB 11.1.0.7
  EBS r12 12.1.1
  
  not sure why APPSSYSPUB has been exceeded. What is the correct way of non-expired this user.
  FNDCPASS or sqlplus >
  now when running adadmin connect as system it would not take the system password.
  
  Thanks in advance.
  Kind regards
  
  
  T
  
  SQL > select name from USER, LOCK_DATE, EXPIRY_DATE account_status
  2 of dba_users
  3 where USERNAME = "APPLSYSPUB";
  
  EXPIRY_DATE LOCK_DATE USERNAME
  ------------------------------ --------------- ---------------
  ACCOUNT_STATUS
  --------------------------------
  APPLSYSPUB OCTOBER 1, 10
  EXPIRED (GRACE)

  Hello

  Please see (how the Applsyspub password expire? [ID] 605570.1).

  Alter profile following (403-Forbidden Error Accessing Forms on E-business Suite (fnd_icx_launch) [556761.1 ID]) in order to avoid that this user locked (Similarly for users of applications and APPLSYS).

  Thank you
  Hussein

• Can Satellite Pro M30, you help me how I can connect the wire of the COM series?

  Dear Sirs,

  Can you help me how I can solve my problem:

  I have TOSHIBA Satellite Pro M30 computer and as you know there is no Serial Port COM in this model.

  Can you help me how I can connect the wire of series Com (SR232 DATA)?

  Where I connect on the updated satellite of reserve.

  For your information I have is also trailer male sides.

  Concerning

  Ali H. Ba - Aqeel

  [email protected]

  Hello
  you´ve got the alternative to get a PCMCIA Serial Port adapter.
  The Installation was easy to my laptop and runs without problems under Windows XP and 2000.

  Have a try.

• Utility of fingerprinting Toshiba - "Failed to connect to the sensor.

  Having a problem with the Toshiba fingerprint utility. The program works fine until I try to use any sort of firewall/antivirus program, even the built-in Windows Firewall: S the scanner still works fine for the boot time scanning, as well as for windows logonm but as soon as any kind of firewall/antivurus software loads up, it fails to connect on the sensor. I added the program to the lists allow but still nothing... So far I tried with AVG Internet Security, Outpost Security Suite and by default, the Windows Firewall. Windows Firewall turned on for awhile, I got when I bought the laptop and there was no problem.

  It's a Qosmio X 500 - 00 X, it uses the same installation of windows when I bought...

  See you soon!

  Hello

  Please update the software of fingerprint. You can find it here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Also try a different firewall and AntiVirus. I have good experiences with AntiVir and Kaspersky Security Suite.

• Drive not work in IE and saying failed to connect with fingerprint sensor

  Hi all

  I purchased a Qosmio x 500 10 t a couple of months back. For the first two weeks, I had no probs using the fingerprint reader to log on windows and connect to Web sites in Internet exploer.

  All of a sudden it would not work on any website that is stored. The Green banner was shown in the upper part of the site and asked finger drag, but nothing happened when I slipped. I rebooted and it worked again but not for long before failing. This time a restart didn't work so I deleted my fingerprints and Web sites and started from scratch. It worked for a few attempts before probs started. And to try to enter the utility of fingerprint it says the connection of sensor failure. So, I did a system restore. He worked for some time yet and then same probs. So I found the update utility software, uninstalled the old and put on the new. Even once worked for a couple of times then failed.

  I couldn't find anything about it is stuck in the registry but to be on the safe side I did a full system own return to the original using disks of backup configuration. Hey presto, I thought that he had worked. Everything goes ok for the first 24 hours and then same problems start to occur. Only this time it's also prompting me to register fingerprints even if I already have. And when I try to enter the utilioty it says cannot read the sensor again.

  The fingerprints for windows log still works as long as I do not close the utility of fingerprinting before stopping. If I quit the utility I can't reopen it as it says failed to connect to the sensor only. And then I have to uninstall and reinstall the utility software. Aty at the time where he occasionally works on sites stored Web, but most of the time it does nothing.

  Help, please. I have to return Toshiba laptop?

  Have you seen this FAQ?
  + Log on to websites with Authentec Fingerprint Software (TrueSuite) and Internet Explorer 8 +.
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=62

  I recommend looking in the forum and read the HowTo and FAQ section in this forum
  Could still be interesting

• Tecra Z50 - utility of fingerprints can not connect on the sensor

  Although the latest version of the driver for validity sensor is installed the fingerprint utility cannot connect to the sensor.

  System: Win 8.1 64-bit

  You should put a little more information on your machine.
  Are you using the version Win8.1 as recovery image original Toshiba?
  I guess that if you use the laptop with the factory settings, everything should be OK.
  Have you noticed this problem with the original driver?

• Satellite M100-165: connection to the LAN operarte correctly

  I have a Satellite M100-165 for about 2 years with the original Setup (win XP etc) and I make all updates.
  The problem is that the connection to the local network is working properly from the beginning.

  I can connect only if I set the NIC property "link speed & Duplex = 10 Mbps Full Duplex", but on some LANs operate at all.
  I appreciate any response.

  Thank you

  I'm a bit confused now. What you mean with connection to the LAN working correctly from the beginning? What is started for you?
  I can't believe that you declare on that now, two years later. Have you already tried to install recovery image and test it with the factory settings?

• Connect a NPN sensor to a DIO

  Using a USB-6221 (or any STD DAQ of DIO) and want to connect a NPN sensor to activate a vi.  It comes to replace switches mechanical existing finger for ergonomic reasons.  The new sensor is an optical switch, without contact.

  Only vaguely familiar with transistor technology and don't know how to make connections.

  The device I am using is detailed here: http://info.bannersalesforce.com/xpedio/groups/public/documents/literature/28436.pdf

  This is the OTBVN6 model indicated in the upper left corner of page 2 of this document.

  The unit requires a minimum of 10 Vcc so not sure what should I do to connect it to a DIO.

  Thanks for any input

  Doug

  Hi Doug,.

  You can use the attached schema to connect your device to a digital input. You can use the n.c. or n.o. output..

  Resistance limits the maximum current to 10mA with a power of 10Vdc connected to Vcc. If you connect the 5V to your DAQ hardware for the connection of SCR, you can omit the zenerdiode.

  Kees

• Windows Live Messenger will not connect automatically, even if the correct boxes are checked.

  Windows Live Messenger (WLM) will not connect automatically, even if the correct boxes are checked.

  WLM signs component snap perfectly when the Connect button is used, but simply refuses to connect when the computer starts.

  It happened once before but seemed to be linked to the use of the Google toolbar that I uninstalled this time without success.

  Post Windows Live questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Some virtual machines have intermittent network connectivity problems and rest work correctly.

  Some virtual machines have intermittent network connectivity problems and rest work correctly. The VMs are in the same group of port and on a 4-node cluster. Physical network interface cards are appearing in vsphere client

  Please confirm if the issue has been resolved after you complete the steps.

• Replace from the Clipboard, or "connect the wires that overlap?

  I'll go by many of my first diagrams and clean code

  with things I've learned since I started using Labview.  A lot of this involves deleting

  objects, then copy/paste of a conception of good reference in the old design.   However,.

  This often leaves a large number of broken wires to clean.    For example, where I had individual

  enumerations that are used in the design, I am replacing them with typedef enumerations.

  (I couldn't typedef controls to appear in my palette of functions, but it is a question

  for another post)

  As it seems to be my only choice ' replace-> select a VI-> [file .llb]->-> [OK] typedef.

  or remove the old one, paste a new, ctrl-B and rewire.  This second option seems

  to go faster than the first.  But in both cases, there is a lot of click and drag to replace a

  control, and there are dozens of them to do.

  Therefore the routing of the wires is the same, but it takes time to connect them all back.

  Is it possible to tell LV "re - connect the broken wires that overlap the pins."

  overall or in a given area?

  Or y at - it a way to simply "replace from the Clipboard?

  Thank you and best regards,

  -- J.

  If you do a find > anyway, the dialog box that opens has a button replace.  After selecting the replacement, one of the options is to replace all.  This should save time if you have multiple copies of the original constants or controls made from the control.

  Lynn

• Windows 7 message pop-up cigarette... "local area connection adapter does not work correctly. Problems related to the pilot experience or material"what the devil does that average and that the devil can do?

  When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows.  Help

  Hello

  Try to uninstall and reinstall the network adapter drivers.

  Download the latest drivers from the card manufacturer support page.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.
  ---------------------------

  Computer network health.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  On the State of intellectual property.

  TCP/IP and its variables usually look like this.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  Typical TCP/IP status looks like this.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.
  
  Physical address is the MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.
  
  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ------------------------

  Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted

  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• IPhone lost 6. the batery was about to die. If the phone does not connect to internet. is there a way to keep track of its location?

  IPhone lost 6. batery about to dye, it is not connected to the internet. Im trying to track its location by FIND MY IPHONE, but seems to be offline.

  I'll be able to track its location? or y at - it another way to track its location?

  No, you won't. There is no other way or the other. The only way to find my iPhone to work is if it has been activated prior to the loss, the device is on and it has an active connection to the internet. If one who does not exist, you cannot follow the device. As you say the battery was almost dead, then he's probably already dead. You will not be able to track the device.