Connect a camera to media player
I have a camera, NI 1764. Is it possible to connect to media player from web constructor? As a webcam.
THX
Hi Adi_,
At this point, control of the media and the Image control can only view videos and images that are hosted on a web server. So the video streaming is not possible at this stage. You may be able to simulate streaming by using a camera to capture images and record these images in a directory that is hosted by a web server. Then your Web UI Builder application you can programmatically load the images in the order at a desired rate (assuming that the file naming scheme image are known). Depending on your application, this may or may not be enough.
I apologize for the inconvenience, but your comments are much appreciated.
Aaron P
National Instruments
Technical sales engineer
Tags: NI Products
Similar Questions
-
How can I connect burner for windows media player
How can I connect burner for windows media player, my i tunes CD of burnes and nero, but I am using windows media player
Hi Tureignjames,-What version of Media Player do you use?If the Media Player 11 that you use, follow the steps listed here:Additional reference on: -
My Sansa MP3 player does not connect to the Windows Media Player.
I connected several times using the same wires. This time THAT WMP says "connect a device" in the upper right corner. This is probably an easy fix. Any suggestions? Thank you.
Hi Larry O would be,.
You are able to open content in Sansa?
Method 1:
Run Windows Media Player troubleshooting utility library:
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
Method 2:
Open Windows Media Player, press the Alt key, check if the device is listed under Tools > options > devices. "Refresh list".
If not listed parameters run 'Windows Media Player' convenience store and check the status.
Open the troubleshooter in the Windows Media Player settings.
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
Hope the above information is helpful.
-
I used the same cable on other sansa and it works very well. It is a 4 GB player, I see if I go to my computer. Thanks for any help.
Hi SteveBrooks,
1. were you able to use the drive before with no problems?
2 you get messages or error codes when you try to synchronize?
Given that the drive is detected by the computer, you can check if the sync settings are correct in Windows media player.
Set up a device to sync in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player
For more information, please visit the links below
Windows Media Player sync: frequently asked questions
You can also view the following support Sansa link and check if it helps:
Sansa player not recognized by the computer
http://KB.SanDisk.com/app/answers/detail/A_ID/42/~/Sansa-player-not-recognized-by-the-computer
Hope this information is useful.
-
Downloads of video but when I try to play windows media player flashes a message saying that he met with a problem and wont play video. If I try to record video on Windows live movie maker it used and it tells me error 0 x 80004005. What I am doing wrong?
Because its a codec? Try the K-Lite codec package.
See you soon,.Jerry -
Media Player does not recognize when Sony Walkman MP3 player is connected
original title: I've GOT A SONY WALKMAN MP3 PLAYER AND MY MEDIA PLAYER SAYS CONNECT A DEVICE WHEN I have ALREADY DONE
My sony walkman mp3 player, TI plys just fine, but when I connect it to my Media Player it says connect a device please help its worked before
Hi CSR,
Thanks for posting your query in Microsoft Community.
I understand that you are facing problem connecting alarm Walkman MP3 player media player in Windows 7.
I imagine the inconvenience that you are experiencing. I will definitely help you with this
1. are you referring to Windows Media player?
If you use Windows media player, follow the steps from the link.
Set up a device to sync in Windows Media Player
http://Windows.Microsoft.com/en-in/Windows7/set-up-a-device-to-sync-in-Windows-Media-Player
-
Cannot play or add LGECI mp3 for Windows media player.
Original title: MP3
Hi, im using the 2006 Apr/LGECI MP3 that I have had since 2006, everytime I try to connect to the windows media player to put on the music, nothing happens. What should I do? (my media pl
Hi, you get an error message?
I suggest you try this method and check.
Install the latest version of codecs:
http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questionsWarning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
-
I'm stuck...
Have old PC running on Windows XP, connected to the Roku via wireless Media Player 11 library... works like a charm.
A new PC running Vista, connected via even wireless, Media Player 11 but Roku continues to tell me that it can't find my music library. My sharing is enabled on MP11. My music library is marked as "shared".
My new PC speak the Roku through my wireless, I can update time etc. using my internet explore.
Help!
Hello Moneychanger.
Thanks for posting in the Microsoft Answers forum! I suggest visit you the links below for assistance with your question:
Please see the links below for more information on setting up a wireless network:
How to set up a wireless network
For more information about Windows Media Center, please visit:
Hope this helps J
Adam
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Canon ELPH360HP replay video conflict on Windows7 Media Player.
Recently bought a Canon ELPH360HP camera, Windows7 Media Player will accept the download of the video and photography but will not play video clips. A vague "It could be a codec problem" message.
Solution suggestions would be appreciated.
Hello Terry,
The error could be a codec problem means that some video files are not supported by Windows Media Player 12. What I can suggest is to download a third party media codec and searched through our search engine Bing.
Kind regards.
-
Hello.
As above, I now get the "C00D11B1" error code when you try to play MPG files out of my camera through Media Player. It cannot read this type of file. Unfortunately, for the past six years, he played identical videos taken out of this camera.
Help on the Web sends me to a page that doesn't seem to be not applicable, with my sound card is the issue (it is perfectly functional, plays MP3s, etc.). Media Player plays all the other files it usually plays (AVI, MP4).
I checked with Windows Update, just as a thought. Nothing has changed - not surprising.
How can I fix? I don't want to take just a blind shot to a system restore point. I'm under the latest Windows 7, 32-bit, and nothing (including the MSE) Watch malware either. Already tried MS Fix - It. He finds a couple of possible errors and I let correct... but nothing that has solved the problem.
Thank you very much.
Well, after trying dozens of solutions across Internet, try to use my Windows recovery disk and each system restore, I had?
My solution was to reinstall Windows 7 completely.
It worked. If you can call the requirement of swatting a fly with a bazooka 'working '.
Here's my solution.
-
I can't Windows media player to connect to my USB memory stick.
I went to my memory stick allows you to put music on it and windows media player does not connect to it. Because it does not connect it allows me to sync music....
I checked my computer and the USB memory key works very well over there... I can see it and windows media player will play the songs that are on it.
I used the hardware diagnostic tool and it came with 4 ALERTS
Driver USB ms problem... SD... XD/SM and CF Reader.
I tried a few different restore points... .but he stll do not work.
Thanks in advance for your time.
Because the USB works on the PC, appears not a hardware problem, but a kind of connection problem with Media Player. Please repost your question to the Windows Media Player Discussion Group at: http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.multimedia.windows.mediaplayer where experts in Media Player will be more than happy to help you with your problem.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Now, I have no sound on my lapt top having a media player to "check the drive for errors" and laptop have no d
the sounds I made a windows update, but no sound came through it please please help with a link to something. Re, I did check the drive for errors and still after it again all the sounds left my laptop which is a vaio song
Thanks for any help
Hi, Pantha9,
What version of Windows are you using?
Start > right click on computer and select Manage
Select Device Manager
Click on the + next to sound, video and game controllers
Right-click on the driver and select uninstall
Restart the computer and Windows will reload the driver
New attempt of his
Access the site of the factory and search for driver updates
-
Hi I have a problem connecting to the internet. When I click on the internet it goes straight to windows media player.
HI Maria,
If you are using Vista, go to http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and scroll down to EXE and click or double-click it to run the program to restore EXE file associations. Once done, do the same for LNK entry. This should restore your programs and get the Internet icon to go to the internet rather than WMP. If you use Windows 7, go to http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html. If you are using XP, go to http://www.dougknox.com/xp/file_assoc.htm.
If this does not work and it started recently, try a system restore to a restore point BEFORE the problem started. If you use Windows 7, see:http://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, see:http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, see:http://www.bleepingcomputer.com/tutorials/tutorial56.html. If the first attempt fails, try an earlier point or two because the problem may have started before you noticed.
I hope this helps.
Good luck!
-
Successfully connected to SOPCAST, but Windows Media Player 11 cannot read the media.
I've successfully connected to SOPCAST, but Windows Media Player11 cannot read the media. I am running XP Professional, Internet Explorer8. Are there settings I need to change to enable P2P?
Hello
Try the tool Microsoft Fix It to the article below and check out them.
Solve the problems of Windows Media Player video and other media or library
http://support.Microsoft.com/mats/windows_media_player_diagnostic/ -
Media Player - try to burn a CD and the drive doesn't show as connected
I bought a new DVD/CD-RW unit, it plays the CD but when I go to Media player and try to burn a CD, the burner does not show as connected? It's weird.
Try this
http://myvideoproblems.com/tutorials/EnableCdRecording.htm
Maybe you are looking for
-
Using iCloud Drive on iPad as a backup documents, music and photos
Hi all With my trusty laptop Windows now 6 years old, that I am looking to replace that with an iPad Pro I feel this will do everything (and more), I would need a laptop. My question is about the storage and backup of my documents, music and video fi
-
Cannot create folders under POP Server mail in iPhone mail
Why Apple does not allow the creation of folders in email POP servers in iPhones? Very unfair to limit this function. I have all Apple devices (iPhone not only) and it would be great if I could organize my emails that I don't want to delete but do n
-
Alternating - Signal Express sampling frequency
Hi, Im trying to get data using Signal Express + NOR USB-6211, I put the sample rate to 44100 Hz. and everything seems to be ok, but when I checked the data I realized this time column does not increase in a period time constant (ie. sample FREQ not
-
Equipped with Vista. I want to add pictures to the text of the emails, but Vista will only send photos as attachments. How can I add pictures of text?
-
How to use existing java features like call webservice etc in webworks 2.0
I have two or three existing features like calling a webservice /construct and sending a xml file to a url etc... developeb in java base. I want to use these features in my blackberry application 2.0 10 webworks. is it possible to do?