Connect befw11s4 v4 for modem webtar MRC

Similar Questions

• Windows removes the internet conntction system. Connected directly to the modem. Have tried to go through just wifi. the same problem. Only happened for several weeks.

  Windows deletes internet conntction after a few minutes. The netgear and control panel says I'm always connected. Must reboot to get reconnected to the windows system. Connected directly to the modem. Have tried to go through just wifi. The same problem. Only happened for several weeks.

  Hi Sailortdt,

  Welcome to Microsoft Community where you can find the answers related to Windows.

  According to the description, it looks like you are facing a problem with network connectivity.

  It would be awesome if you could answers to these questions in order to help you further.

  1. have you made changes on the computer before this problem?

  2. you receive an error message or error code?

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Connection dial-up for laptop Qosmio F60/05F

  I need dial-up connection.
  This external modem will work with Qosmio F60/05F laptop under Windows7?
  Hadou none taken for phone cable, not dial-up modem not built inside this Toshiba laptop.

  Visit your local dealer and buy the new external dial-up modem compatible with Win7 64 bit.
  I assume that each of them should work properly. Just be sure that they are supported to 32/64 bit operating systems.

• Airport extreme for modem cable via an ethernet switch?

  I can connect the airport extreme to the modem cable via an ethernet switch, or must the extreme connect directly to the modem?

  The answer to your question depends on what type of "modem" cable you may have.

  If you have a simple modem, as in the example below with a single port Ethernet, your network should look like this:

  Internet > Modem > AirPort Extreme > Switch and other devices.

  

  If you have a modem/router, which is actually a modem and a router separate which are combined in a single package, looking for something like the example below, your network may look like this:

  Internet > Modem/Router > switch > AirPort Extreme and other devices

  or... it might look like this:

  Internet > Modem/Router > AirPort Extreme > switch and other devices

  

  If you do not know what kind of modem you have, post back with the number of brand and model of the device that you call your "modem", and we will do some checking.

• Qosmio X 770 does not connect to my wireless modem

  My Qosmio X 770 does not connect to my wireless modem. The without line on the computer turns on and another computer is able to connect to the modem without problems. The Qosmio connects to the modem via a cable. The computer sees the modem and the modem is next to the computer, so range should not be a problem.

  Would help reinstall or update drivers wireless and if so, how can I do this?

  I am running Windows 7.

  Great! Thanks for your comments!

• Intermittently, Time Capsule does not connect to the cable Modem

  Capsule time bought a few weeks ago.  Barely implemented.  TC does not recognize the cable modem.  These forums to get help.  Tracking the specific set of sequence with long delays between the steps and the modem and the TC.  It worked for about a month.  Now about once a day the TC works but not internet wireless or ethernet through the CT.  If I unplug the TC and let it restart and initialize internet connection returns.  During the internet cuts I have ethernet and Wi - Fi at transport CANADA, printers, and drives on the network as well as the time Capsule backup drive and your data.  If I ever lose ethernet and Wi - Fi to TB.  In addition, the modem works fine.  If I cut the TC and to the cable modem ethernet connection I have access to the internet.

  Thank you.  All were huge last time assistance.

  If it's always the same modem... a SB6141 of Arris... There have been a number of reports of trouble with this product with Apple routers. There is no mention that in your first post a month ago, because we wanted to see if a reset of the good modem would get things works well for you.  I had the same experience as with the same exact modem you have.

  The SB6141 is a good product, and the time Capsule is as well. But for some users, these two products do not work as well together. If you call people to support for modem, they show sure to like the question time Capsule. If you call Apple, they will have a different view on things. The bottom line when you go to a support group... because it of always the other guy that you are having problems.

  At this point, the only real solution would be to decide if you want to try another brand and model of modem and keep the time Capsule, or keep the modem and try another brand of router and then connect the Capsule to the router.

  In my case, I replaced the SB6141 (I tried 3 different SB6141s previously because the ISP admitted having difficulties with this modem and some routers) with a 5341J Zoom, and did not have a single falling Internet connection since I installed the Zoom for more than a year. If your Internet service provider indicates that the Zoom is a product that is compatible with their service, you might want to try this modem.

  But unfortunately, there is no assurance that the "solution" that has worked for me will be the solution that suits you. Such is the nature of the beast, when you work with products from two different suppliers.

• E2700 cannot connect directly to the modem, but connects via another wifi router?

  I have a Netgear WNDR3700v2 that I was very pleased until I had a nest of thermostat. Apparently it's a router not supported and I had to change it. I bought an E2700 since he took charge, but I have a huge dilemma...

  If I connect the linksys directly to the modem, I don't get an internet connection. I got out and renewed IPs without success...

  But if I wired the linksys for the netgear, I get a good solid internet connection. problem is, I have no need for installation of 2 routers on top of each other...

  any suggestions? I would like to know what kind of information you need.

  Basically, I do not understand why he is not able to connect directly to the modem to linksys. Yet, it becomes solid connection wired through another router.

  I use Comcast and South FL. it is motorola surfboard modem

  OK, found the solution.

  call 1800COMCAST

  go to the problems of the internet, there is an option to send a refresh signal to your modem.

  I did, and it started working. I guess that clears the memory and binds to the new MAC address...

  After that I did, internet is back. I hope this will be useful to someone. I was ready to return the dang thing.

• Linksys Router WRT160N - Wireless does not connect to the cable modem

  I installed the Linksys WRT160n router to replace an existing G router. When installed the new wireless router works, but the router does not receive a connection (IP address - look under status) of the cable modem (so no internet). When I reconnect the old router and then connect the new router, I get any internet connection through two routers (so the old dishes router the IP address that accepts the new router).

  I have configured the router N new for

  "Automatic configuration - DHCP", no need for connection, IP address dynamic, etc (as required by ISP - Timewarner)

  I tried to renewal and release IP address by the router N when it is connected directly to the main switch (the switch to connect to the cable modem). In so doing, shouldn't that assign a new IP address to the router?

  I am allowed 3 IPs from the cable company (because of the switch) and I use all three with three different internet IP cameras to each address for home security system.

  Any suggestions on why the router is not connecting to the internet? Do I need to reboot physically everything on the network, including the cable modem?

  If I understand your post, you said that your ISP gives you 3 Internet IP addresses and you have 3 cameras that use one of these Internet IP addresses.  If this is correct, then that leaves no IP Internet address for your WRT160N use - so that would explain why your WRT160N cannot get an Internet connection.

  If I misread your post, and you have an Internet IP address available for the WRT160N, you might have a problem with your modem and two WRT160N tries to use the same 192.168.1.x subnet.  To check this, follow these steps:

  (1) Please indicate addresses that use your cameras (IE before you take the test below).  If the addresses do not begin with 192.168, then erase the last half of each address.

  (2) Please indicate your ISP

  (3) Please indicate the make and exact model of your modem (not the WRT160N) number.

  (4) Please do the following test:

  Put your entire network.  Disconnect the switch (including cameras) to the modem.  Using an ethernet cable, connect your modem directly to your computer.  (Do not use the WRT160N for this test).  Turn on the modem and the computer.  Make sure you have an active Internet connection, then go ahead with what follows: (even if your Internet connection does not work, include this and move forward.)

  Go to 'Start' > all programs > Accessories > command prompt.
  A black DOS window will appear. Type "ipconfig/all" (with no quotes), and press the Enter key.   Copy all results in your next post.  To make the copy, highlight the results, and then use the keys copy (Ctrl-c) and paste (Ctrl-v) keys.  If your "IP address" does not begin with 192.168, then for security reasons, delete the latter half of your IP address.

• Problem with Windows Fax and Scan does not connect to the Internal Modem

  Just got a new Acer Aspire 5542-5416 computer laptop with Windows 7 64 bit Home Premium, 4 GB of Ram and a 320 GB hard drive. It has a 56 k modem integrated fax of like the old days, but I can't make it work. The laptop did not come with the Windows CD.

  If I open the program Windows Fax and Scan, it is not able to connect to the modem. Basically, if I click on tools > fax accounts > Add..., I get a box with 2 choices: to connect to a fax modem or connect to a fax on my network server. When I want to connect a fax modem I get a message that says: an error has occurred. Please, try the operation again later or contact your administrator. It allows me to do this then just clock OK and them I'm right where I started.

  While in Windows Fax and Scan, if I click on tools > fax settings... nothing happens. No menu settings or anything ever appears. Quite simply, the program does nothing. If I try tools > Fax Status Monitor... I get a box that says entrance exam status, ready to receive a fax. It has a blue progress bar as something takes over, but it gets about 1/100 to and never goes further or ends. There is no box, but there are 3 buttons: view details, answer call or cancel. If I hit details, I get an empty list. If I click on answer call I get an error that says that the fax service is not available.

  If I try tools > Options, general tab has only a single option box is checked: play a sound when come it to new messages. If I try to print a Word or PDF file to a fax using Fax in the printer list, I get the same box with 2 choices: to connect to a fax modem or connect to a fax on my network server, but I get the same error message: an error has occurred. Please, try the operation again later or contact your administrator.

  I've searched the Internet high and low for a solution but no luck. There is a lot of discussion about this problem, but none of the solutions work for me. If I go to Device Manager, the modem is working properly and if I click on the Modem query on the Diagnostics tab, it seems to be able to communicate with the modem very well. I tried to roll back the driver and updated again and still no luck, same problem. If I go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fax\Accounts in the registry, there is no subkeys under the folder accounts I can delete.

  Has anyone else had a similar problem? Is there any solution for this? I did a Windows Update last night and has not yet solve it. Thank you.

  Sorry about that.

  Here is the link:

  http://social.msdn.Microsoft.com/forums/en-us/windowscompatibility/thread/c75ae899-D05B-411D-a7f2-00fdd33b8589/

• All of a sudden, after a update of firefox, I get "this connection is untrusted" for Facebook, no matter if I use http: or https:, WHY?

  All of a sudden, after a update of firefox, I get "this connection is untrusted" for Facebook, no matter if I use http: or https:, WHY? Here are all the details of the error message:

  This connection is Untrusted

  You asked Firefox to connect safely to facebook.com, but we cannot confirm that your connection is secure.

  Normally, when you try to connect safely, sites will present a reliable identification to prove that you're in the right place. However, the identity of this site cannot be verified.
  What should I do?

  If you normally connect to this site without problems, this error can mean that someone is trying to impersonate the identity of the site, and you should not continue.

  This site uses HTTP Strict Transport Security (HST) to specify that Firefox didn't connect safely. As a result, it is not possible to add an exception for this certificate.

  Facebook.com uses an invalid security certificate.

  The certificate is not trusted because the issuer certificate is unknown.

  (Error code: sec_error_unknown_issuer)

  (Also included a screenshot).

  COR - el said

  You can check the date and time and time zone in the clock on your computer: (double) click on the clock icon in the Windows taskbar.

  • https://support.Mozilla.org/KB/secure+connection+failed

  You can retrieve the certificate and check details such as WHO issued the certificates and the expiration dates of certificates.

  • Click on the link at the bottom of the error page: "I understand the risks".
  • Let Firefox recover the certificate: "Add Exception"-> "get certificate".
  • Click on the button "View" and inspect the certificate and the Coachman, who is the issuer.

  You can see more details like the intermediate certificates that are used in the Details tab.

  If you cannot inspect the certificate by "I understand the risks", then try this:

  Open the chrome URI by pasting or typing this URI in the address bar to open the window "Add the Security Exception" and to check the certificate:

  • chrome://pippki/content/exceptionDialog.XUL

  In the field location type and paste the URL of the Web site

  • retrieve the certificate via the button 'Get certificate '.
  • Click on the "view..." button. "to inspect the certificate in the certificate display

  Check which is the issuer of the certificate.

  You can get more details like the certificate chain in the Details tab of the certificate display.

• HP Pavilion 020na-300 Mini PC: connect two monitors for HP Pavilion 020na-300 Mini PC

  What are the options to connect two monitors for HP Pavilion 020na-300 Mini PC?

  1. do I need 2 x HDMI monitors? A DP HDMI monitor to use with different socket or adapter as well?

  2. How can I connect the 2nd to the 300-020na Mini PC HP Pavilion?

  RSFSS, welcome to the forum.

  Here's a guide that should help you with your problem.

  RSFSS wrote:
  

  What are the options to connect two monitors for HP Pavilion 020na-300 Mini PC?

  1. do I need 2 x HDMI monitors? A DP HDMI monitor to use with different socket or adapter as well?  If you do not already have the monitors, I definitel would get both of them with HDMI connectors.  You will need a DP to HDMI connector:

  http://www.Amazon.com/GP/product/B004C9QST2?gclid=CJDQqtv1rsoCFZBcfgodha4DDQ

  2. How can I connect the 2nd to the 300-020na Mini PC HP Pavilion?  The Guide I've provided assistance with this procedure.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• How to connect the keyboard for apple tv wireless?

  How to connect the keyboard for apple tv wireless?

  If you mean the 4th generation new Apple Tv, you cannot currently. It does not support keyboards at this time.

  If you mean the 3rd generation Apple Tv:

  Use a keyboard Apple Wireless with your Apple TV (2nd or 3rd generation) - Apple supported

• comes to connect in iCloud for the first time and to synchronize my calendars etc I noticed it all disappeared.  How can I restore them?

  comes to connect in iCloud for the first time and to synchronize my calendars etc I noticed it all disappeared.  How can I restore them?

  They run iCloud.com? You have them on a computer?

• What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

  I have a PCI 6519 data acquisition card. I want to install it on the PC and use it outputs to control a robot. I have problems with the connections to the terminal block which is attached to the cable.

  What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

  
  

• I have not connected to hotmail for a while, 3 months or more, and when I did there is absolutely nothing in my Inbox unless the Hotmail team welcome. Where all my stuff?

  lack of everything in my email account

  I have not connected to hotmail for a while, 3 months or more, and when I did there is absolutely nothing in my Inbox unless the Hotmail team welcome. Where all my stuff?
  That's happened?

  Darling
  Just a step: none forum available choices apply to this question.

  Hello CherieBurns,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.