Connect ES / ARE + TG to 6708 card online?

Similar Questions

• I have a 'C' IDE drive failure I have a SATA drive connected via a PCI-SATA controller card. I want to change from hard disk IDE 'C' on the SATA drive. What are the steps to achieve this?

  Running Windows XP Home, I want to change hard drive as described above.

  As a result, I have a USB hard drive, which I copied the hard drive of the original 'C', before it fails altogether.

  Is it possible to copy this USB drive on my SATA hard drive and have as my primary hard drive?

  Keeping in mind of the SATA hard drive, connected via a PCI-SATA controller card.

  Unless your third sata card supports the option to boot from this map, its not going to work. Not all sata cards are bootable.

• Hello, I can not open my adobe because its shows the message "you are not connected to the internet, but I am online.

  Hello, I can not open my adobe because its shows the message "you are not connected to the internet, but I am online.

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• Tecra 8000: No memory available to connect with area map PC

  I have a Tecra 8000 running Win98 SE and use a card PCMCIA 3Com for my Internet connection. I was troubleshooting my computer on another issue and in the process disabled Cardbus PCMCIA Toshiba ToPIC controllers. After you have enabled these again once I am more able to communicate with the PC card and so unable to connect to the Internet.

  Card troubleshooting agent PC States: "Windows is not able to identify or use the inserted PC card device because there is no available memory area to connect with this device. You need to do an area memory available before this device can be used. Check the CONFIGURATION of your computer. A memory manager that is excluding the regions of superior memory between A000 and FFFF in the SYS file '.

  My Cardbus controllers are defined as follows:
  1 memory range - 0c 000000 - 0C000FFF
  2 memory range - 001000 0c - 0C001FFF

  My PC Card (PCMCIA) properties are as follows:
  Card services shared memory:
  Start 000c 0000
  End 00FFFFFF
  Length 00001000

  While the PC Card Modem is recognized at the Port, it can be communicated with and error message is shown as follows:

  ' Error 666: the modem is not plugged in or is out of service. "Connect a modem to your computer and try again.

  When I run the Diagnostics on the Modem does not respond to the exception of the following:

  "' Open Comm: cannot open port"

  Any help or advice will be appreciated.

  Have you tried to uninstall the Cardbus drivers? Not sure about the location in Win98 (in XP it is in Device Manager), go to "PCMCIA adapters" and uninstall all entries in controller.

  Reboot and Win98 will perform his routine "new hardware found". This is going to re - install drivers and with a bit of luck should solve your problem.

• Problem with installing new card online 7600-SSC-400

  Hi all

  I have a problem when you try to install the new card online 7600-SSC-400 on Cisco 6509. Here was the message is displayed on the screen after I finished installing the card online: "% C6KPWR-SP-4-No supported: no power management module into the connector 7, unauthorized: the image of the card is not packaged in image." I tried to install this card online on another site, but it does not work. The substantive position's logfile which I recorded in the installation session. I don't know what I should do now, please help me solve this problem!

  Thank you very much

  Hieu

  Your IOS image should be characteristic of 'Advanced IP Services' configured to run the IPSEC-SPA module. You are running "Services IP".

  Here is the URL for your reference:

  http://www.Cisco.com/en/us/docs/switches/LAN/catalyst6500/IOS/12.2SXF/native/release/notes/features.html#wp2782875

  Hope that helps.

• IPhone 6 can connect to WIFI without a sim card?

  6 IPhone can connect to WIFI without a Sim Card?

  knitfly wrote:

  6 IPhone can connect to WIFI without a Sim Card?

  Yes, assuming that the iphone 6 has already been activated.

• Not connected, you are currently not connected to any network.

  When I'm on the network icon or click on it says "not connected, you are currently not connected to any networks." I know I'm connected but how am I guess sharing media with friends now, it's kind of a big deal for me and I tried to remove the network and then restart and then re-login has always the same thing happens as my security type is WPA2-PSK , but he says WPA2-Personal, when I go to manage wireless networks, I guess that means the same thing so can you help me more im going to upgrade to windows 7 soon and I don't know if he's going to say the same thing, please help.

  Hello

  1. don't you make changes to your computer before the problem?
  2. what type of connection you are using?  Cable?  Wireless?

  Search for related errors in the event viewer.

  Test in safe mode with networkproblem.

  See also: http://windows.microsoft.com/en-US/windows-vista/The-doctor-is-in-Using-Network-Diagnostics-in-Windows-Vista

• Lose the internet connection in between while trying to browse online

  Original title: lost session?

  I don't know anything about computers! I work from home so I have my work here computer and my laptop.

  When I'm working, I regularly lose connection and my screen go black and then he says: "session lost."

  I have to disconnect from the internet and wait about 30 seconds and reconnect on/again.  I also lose the

  connection on my laptop when this happens.

  I have AT & T service and a Cisco router.

  What is an outside source that makes me lose my connection?

  Thank you!

  Hello

  1. using a wireless or a wired internet connection?

  2. you receive a specific error message/code when you lose the network connection?

  3 did you change on your computer before the show?

  According to the description of your problem has been the issue is not specific to a single computer, because you lose the connection to both of your computers at the same time. Keeping this in mind I recommend you contact AT & T by clicking the link http://www.att.com/esupport/

  If AT & T guide you indicating that the problem is with your computer, you can then follow the steps mentioned below:

  Method 1:

  Step 1: Perform a safe mode with networking

  Safe mode, start Windows in a limited State, where only the essential is started. If a problem does reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as causes possible

  Start your computer in safe mode with networking

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2: Perform the clean boot

  A clean boot helps eliminate software conflicts. The article below describes how to solve problems in Windows 7 by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual. To configure your computer to clean boot see the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.

  Method 2:

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 3:

  Many network connection problems are caused by hardware that is not configured correctly. Here is some information on how to check your cables, check or reset your modem and check for problems with your network adapter

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

  Method 4:

  When you run the network troubleshooter utility, any problem found, along with any solution, appears in the dialog of the resolution of network issues. If it has more detailed or technical information about the problem and possible solutions, it is saved in one or more event logs

  Use Network Troubleshooter event logs to solve network problems

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  It could be useful!

• XPS 8300 nine connects to the Broadcom Netlink Communication card only after restarting 3 - 4 times at cold start.

  Hello

  I just bought a new XPS 8300.

  After woeking OK a few days, now it connects to the Broadcom Netlink Communication card only after restarting 3 - 4 times at cold start.

  Someone has the same problem?

  All other computers in the House connect from the first shot. (two cell phones and another office.) They have much slower computers.

  In the beginning, I have re-installed the driver (DVD and downloaded), but not that's the problem.

  The computer must have a little hot.

  When it does connect, Test the Dell tool DOES NOT SHOW (does not appear in the list of tests) Broadcom NetLink Gigabite Ethernet card.

  I'm a little disappointed, it's a brand new computer, I was expecting more problems from the beginning.

  Thanks, Cristian, Montreal, Canada

  All,

  According to the received update, please call Support technical and would take appropriate action.

  The fix is based on case to case, so I would ask all those who face this problem to call tech support for your region.

  The technical team sent details to the technical team and the TS process for this issue should go smoothly.

  FYI: I was not provided with a patch, please contact Dell Technical Support for more details.

• Satellite A300-02: connection WLan keeps falling & wireless network card is disabled

  Hello..

  You just bought a new A300-02W (canada), everything works fine wxcept... wireless.
  The passing continues WiFi connection and card wifi has been disabled, I restart the computer then go through the steps of repair under Win Vista to be able to connect again.
  I went to the store and got one same one, another model and I'm having the same problem, the drivers are up-to-date, tried to Win XP and it is the same question.
  Called Toshiba tech support and they advised me to wait for the new wireless driver because the laptop I had is still new.

  Wireless card: Intel wireless wifi link 5100agn
  any idea?

  Hello

  Your laptop is a Canadian series and that's why I put t know why this WLan issue appears on your laptop, but I recommend you use and installation and driver WLan Intel page.

  In addition, you can check the portal of Toshiba Europe WLan WLan driver:
  http://APS2.toshiba-tro.de/WLAN/

  In addition you must disable the option in the properties of card WLan (Device Manager-> properties-> Advanced tab CAD WLan) for energy savings
  Also check the power management tab and turn off also the option called allow the computer to turn off the device to save energy

  Finally, and especially if a newer BIOS has been released for this series then update!

  Good bye

• Sat Pro A60 - screen backlight turns off after the connection with the Vodafone 3g data card

  I have a Sam Pro A60 which took a mounted Vodafone 3g data card. It connects OK data card but then the screen becomes 'empty' you can see the icons if you get the light from the window in the right direction, but permanently unusable.

  A reboot and the screen comes back. Are there keys, I can try to put light or ideas to test if it's a hardware or software problem?
  Thanks in advance.

  Hello

  It s a very strange problem. But I'll try my best ;)

  I noticed a similar problem on my second book. The display light didn't stop but the blue screen of death (BSOD) appeared and I could not continue my work.

  After a lengthy investigation, I found some useful tips.
  Someone told me that I have to disable HT technology (Hyper-Threading Technology) in the system BIOS settings.

  It's a key!

  As I remember the Satellite Pro A60 also supports this Hyper-Threading Technology.
  You can disable this function in the Toshiba HWSetup tool, in the CPU tab.

  Check it out and maybe it's a key as in my case.

  Dude good luck

• Cannot connect the Satellite A660 to WLan - card not found Intel

  I unboxed it today and connected to my home wireless network. Everything was fine.
  I propose then my laptop in the living room where the router and the modem is, the connection dies less than a minute or two.
  Then he says that there are no networks in range at all, cannot detect everything.

  I troubleshoot it and the results are: he says: problem with the router / access point is fixed; and another notification that says a network cable is disconnected or may be broken. I have no cable so idk why he tries a wired connection. I reset my router and tried everything.

  I take her back to połączyćto left home in my room and it works fine, no drop outs.
  It's all new, satellite a66. I made sure that my data was on and the wifi is good.

  Another notification appears when I troubleshoot that says "My technology Intel wifi adapter not found" idk what it is all...

  Thank you.

  JD

  > Another notification appears when I troubleshoot that says "My technology Intel wifi adapter not found" idk what it is all...
  Because of this message, I would recommend checking the status of the WiFi (WLan card) adapter in Device Manager.
  You could uninstall the WLan driver in Device Manager.
  Then you need to download the latest driver from this page:
  http://APS2.toshiba-tro.de/WLAN/

  and should install the new drivers.
  Reconfigure the Wlan connection and test functionality.

  PS: Please make sure that the WiFi was enabled (FN + F8) before trying to set up the connection.

• Said connections wireless network connection are available, but the networks to connect to are no longer visible in the connection

  I got a new laptop from work and have connected a couple of times on our network.  Now, he does not connect through the wireless network connection.  He said that the connections are available, but there is no connection available more in the list.  If you have to manage wireless networks, it is in the list... but you can not log in via this page.  Any help would be grateful.

  Thank you!

  Hello

  1. what operating system you are using?

  2. how many computers is connected to the network?

  3 - is a domain network?

  4. What is the exact error code or error message you received?

  5 have have there been recent changes made on the computer before the show?

  Follow the steps mentioned below and check if that helps.

  Method 1: Troubleshooting run Network.

   

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   

  Method 2: Wi - Fi and in Windows network connection issues.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If you cannot connect to a network, it could be a problem with your network adapter. You can try to use the network adapter troubleshooting utility to automatically find and fix some common problems.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 3: Disable the security software and check.

   

  You can also temporarily disable the security software and check if the problem persists. Be sure to enable this security software on the computer after checking.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  For more information, please see the following links:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  I hope that helps!

• I can not connect Dell Wireless 1390 WLAN Mini Card to WAP4410N

  Hello

  I have dell inspiron 640 m with Wireless 1390 WLAN Mini-Card, and it connects perfectly with any other routers.

  but I can't connect it to the CISCO WAP4410N router! I tried several times but no way.

  I can connect IPAD, Samsung Smart tv, Denon portable radio and toshiba PC but not Imy nspiron computer network.

  I think that my WIFI cannot get th WAP4410N IP address!

  Any expert can help me?

  These products are processed by the Cisco Small Business support community. (URL: https://supportforums.cisco.com/community/netpro/small-business )

• Interruption of the connection to the help and Support window online

  Hi, now my help and support on my laptop with Vista Business 32-bit does not work. He'll never before. When I click on help and support on the start menu and type my question, he said "you have lost your connection using Windows and the Support Web site. Try
  to connect again. "Now, only my help in offline mode is working. And Yes, it is already set to find help online first. (I use my cell phone right now so I don't remember what exact word.) We must first find the database and online help, and it is already set. Indeed, my use the online help to work before, but now it is not and I never change a parameter help and support) there is no problem with my internet connection.

  Hi Trulsbi,
  What type of connection do you have?
  You use a router? If you do, how do you connect? USB, ethernet or wireless?

  This problem may occur if one or more of the following conditions are met:

  • There is a problem with the firmware for your base station.
  • IEEE 802. 1 X authentication is enabled.
  • Your adapter (USB) wireless universal serial bus problems that are related to the USB bus.
  • Your Internet is a DSL connection that uses a Point to support the Ethernet (PPPoE) authentication.

  I know you don't actually lose your connection, but move to make changes to the settings recommended on the article and see if it helps. If it is not the case, change it back to the original settings.

  Here is the complete article, please measures and additional information
  http://support.Microsoft.com/kb/814080

  It will be useful,
  Thank you
  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think