connect my laptop to my tv with HDMI.

Similar Questions

• I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  tvwizard2ft.exe

  I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  Download and install the latest graphics driver. Visit the website of intel to get that. Once downloaded unzip the file and search for tvwsetup.exe.Run this file.

  You may also download and install .NET Framework 3.0 (SP2)

• When I try to connect with my wireless laptop will connect only to Local access. If I connect the laptop to the router with the ethernet cable, it works very well.

  VIsta - Local access only

  HI -.
  I recently moved.   I use the same router from my old apartment and I had no problem connection in the past.   Since I moved I have a new Time Warner modem (Cisco) and the modem works fine.

  The router also works very well I'm able to connect with my iPhone and IPad without any problem.

  But when I try to connect with my wireless laptop, it will only connect to Local access.    If I connect the laptop to the router with the ethernet cable, it works very well.

  It's a Dell Studio 15 with Vista.

  The computer is able to connect to wifi to other places without any problem, but for some reason that I can't connect home.   I tried to reset the modem and the router several times, but that did not help.   I tried the option repair & diagnose several times but it doesn't work.

  I tried to look for other solutions online and tried to disable IPv6, and while it helped some and I was able to connect wireless, the computer ran so slowly that it didn't seem like a good solution.

  This has been very frustrating.   Thanks in advance for any help or suggestion.
  Staci

  Hello Staciusa,

  Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:

  Take a look at step 6 in this article that give more details about it:

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

  If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

• Connection Satellite L750D to the TV with HDMI cable

  I tried to connect a laptop L750D to a Phillips TV but none is displayed on the TV and the message on the TV is «unsupported video»

  When I connected the laptop to the TV and turned on the laptop, it's in restart mode and the messages showed on TV, but as soon as windows has started to the top of the screen of the TV turned blue and the "unsupported video" message appeared.

  I then plugged a laptop HP pavilion g series to the TV with the HDMI cable and using the same port HDMI on the TV and the computer screen is appeared on television right now.

  Can someone help me please?

  Hello

  Try this:
  Both devices (TV and laptop) must be turned off but connected with a HDMI cable.
  Then turn on the TV and the laptop.
  After Windows has started, use the Fn + F5 secret key to switch the video output to TV.
  Is this possible?

  By the way: have you chosen the right graphic resolution and supported?
  Don't forget that you TV supports the resolution which has been chosen!

• Can I damage my graphics card by connecting my laptop to my tv via hdmi.

  Hi, I was shopping at Best Buy and I heard someone saying that I could damage my graphics card by connecting my pc to my TV via HDMI. This is a not seem OK for me but thought I would check doube. I have a dv6-3225dx Pavilion Entertainment PC. I have windows 7 64 bit. Thank you very much

  Hello:

  I've never heard of such a claim.

  People connect external monitors and TV on their laptops all the time, that's why they are equipped with video/HDMI ports.

  Probably, there is a higher risk of damage/overheating to the graphics card for games graphics intensive video then they streaming video to an external monitor/TV.

  I would not be concerned.

  Paul

• Cannot connect Windows 7 pc to TV with HDMI

  just upgraded to Windows 7 from Vista.  I used to be able to connect using Windows Vista by connecting a cable TV on my computer HDMI laptop Dell xps.  This no longer works with Windows 7.  The operating system upgrade is the only change.  Sunday, he worked with Vista and Monday it didn't work anymore after the upgrade to Windows 7.

  Your best bet is:

  Click Start > Help and Support > Type, HDMI

  You will find the information you need, a piece of cake!

  HTH

  If I brought you joy, vote! If I answered your question, click, propose as answer! > WT

• How to connect by Satellite L305 to TV with HDMI Cable VGA

  Hello

  I have a Toshiba Satellite L305, running windows vista Home premium.
  I bought a HDMI VGA cable but when I plug my Satellite on my Westinghouse TV I can't get the two to connect.

  Please help me.

  Hello

  You try to connect to laptop (HDMI) to TV (VGA) using an HDMI cable to VGA?
  As far as I know this is possible only if the s for computer laptop HDMI port can be set to analog signal. As much as I know this option is not available in the BIOS or elsewhere.
  So if you want to connect VGA HDMI Digital common so I have to say; It won't work buddy.

  You will need something like HDMI to VGA Converter that converts the digital signal into analog signal.

• No sound from the laptop to the TV with HDMI connection

  Reference Dell Laptop windows 7 connected to the Samsung 46 '' smart TV with an HDMI cable.  Video works great but no sound on TV.  Is there a setting somewhere that will cause the audio to work from the laptop to the TV via the HDMI cable?

  Right click on the sound icon in the system tray, select playback devices and output of the default value.

  You will need to install an audio HDMI driver for your graphics card if the HDMI output is not displayed...

• connecting the 2 everything in those with hdmi

  Hello

  We recently purchased a HP Envy 27 runnung windows 8.1. We have already had a HP Touchsmart 610 Windows 7.

  I would use the 610 as a second monitor for the new Envy27. I have connected the 2 computers with an hdmi cable, but can't get to save as a second monitor.

  Can someone help me, or is it not possible to link these 2 all in UNITS?

  Hello

  AIO machines are designed to run as AIO (stand-alone machines, without having to connect what either). At this point no other choice than to use an exit USB video card on a same machine and UNPLUG the video card in any other machine. You want to do this? Buy the USB video card and another monitor, it's much cheaper and more convenient.

  Kind regards.

• HELP: Laptop computer plug on TV with HDMI

  Hello

  I'm trying to connect my laptop to my TV with HDMI.  Audio plays in my TV speakers very well.  However, my laptop screen is not mirrored back to me on my TV screen.  How can I solve this problem?  My wallpaper appears on my TV but the icons are missing.  When I drag my mouse to the top corner of the screen of my laptop, it will subsequently appear on my TV screen.

  I watched before videos on my TV while my laptop is connected and everything was fine.  For some reason when I plugged on TV today, a default window popped up and he adjusted the settings (I hit very well without thinking about it, and now I can't fix it).  SOS!

  Any help would be greatly appreciated.

  JEL

  In the display settings (Control Panel, personalization), click on your secondary monitor (TV), and then click to uncheck the box next to "extend the desktop to this monitor". Buttons-click apply then OK to exit.

  Or you can just move windows to the second monitor:

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/move-Windows-between-multiple-monitors

  Multiple monitors: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

• Problems with sound when it is connected to the TV with HDMI

  When I connect my laptop to my tv with the HDMI cable everything is fine display wise, but when I go to netflix and watch a movie instantly the sound comes only from the laptop. All other windows sounds come through the TV speakers. Any solution?
  Sony VAIO Windows Vista laptop. Model is VGN-NW150J

  Hi RayBeaudry

   

  Follow the steps below and verify that the default audio device is correct-

  a. click Start type sound in the box start the search.
  b. click on his research at the top of the start menu.
  c. click the read tab notice the check mark next to the default device. For the most part
  users, the default device's speakers.
  d. Select the audio device output digital (HDMI) device to set as audio device as the default, and then click on set as default.
  e. click the Properties button, and then select the levels tab and make sure that the volume
  is at 100 and not cut.
  f. click OK to save your settings and close the sound dialog box.

  Check the link for assistance on the question below
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

   

  I hope this helps.

• Add TV LCD LG as an audio output device when connected with HDMI

  When I connected my laptop to my TV via HDMI, the sound came through the television. But I went to the audio output of the laptop by accidentally turning off the TV as a device on the selection screen of the "playback devices". Now I want to spend my audio back to my TV, but the device is no longer an option. How it add or repair?

  Hello
   
   
   
  Method 1.
  Please update the video card drivers, but also the audio drivers and then check if you have the ability to change the audio device by default.
   
  Update your sound driver in Device Manager:
  a. Click Start and then click Control Panel
  b. click on system and Maintenance
  c. under Device Manager, click on devices and equipment display
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  d. expand sound, video and game controllers
  e. right click on your Audio Controller, and then click Properties
  f. Select the driver tab
  g. click the Update Driver button.
  h. Select the option automatically search for an updated driver
   
  Windows will now look for an update for your Audio drivers locally and on the internet and then will guide you through the process of installing the driver.

   

  For more information see the links below:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

   

   

  Method 2.

  For more information see the articles below:

  Connect your computer to a TV
  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV

   

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Setting the resolution with HDMI

  I'm trying to connect my laptop Sony Vaio (VPCEE2M1E with AMD/ATI Radeon) to my couple of years Toshiba TV.  The Toshiba is the brand "HD READY", but when I hook them together the default resolution is 720 not 1080.

  I went to control PANEL / DISPLAY / SETTINGS HDMI to try to reset manually but 768 and 1080 selection buttons are both in gray.  Also, I can not select the 'Adjust Resolution (Disable)' tab to see what's there.

  The HDMI cable is a cable of high quality IXOS, so that should not present any problems.

  Any thoughts?  Very much appreciated.

  I'm trying to connect my laptop Sony Vaio (VPCEE2M1E with AMD/ATI Radeon) to my couple of years Toshiba TV.  The Toshiba is the brand "HD READY", but when I hook them together the default resolution is 720 not 1080.

  What is the model of your Toshiba TV? 720 p is one of the HD, just not one of the highest resolutions and lots of 720 p always sell TVs HD. Many of those who are capable of 1080i (interelaced) resolution, you must check the specifications of TV to find out. 1080i is not as high resolution 1080 p, but he could make videos to look a little better than 720 p.

  The other consideration is that you may need to add the resolutions undetected in your resolution settings using Catalyst Control Center Radeon card. If you only use the video card drivers MS (ie. not provided on the video card driver disk or downloaded from ATI) then the additional resolution settings may not be available.

• No sound with HDMI

  I NO LONGER GET SOUND (AUDIO) WHEN CONNECTING MY LAPTOP TO MY TV VIA HDMI. I THINK I CAN REMOVE THE TV AND CABLE SINCE MAC MY WIFE PERFORMS THIS DUTY PERFECTLY. MY LAPTOP IS a DV6-7010us... RUNNING WINDOWS 7.

  DOES ANYONE ELSE HAVE THIS PROBLEM? WOULD APPRECIATE ANY HELP/SUGGESTIONS BEFORE TAKING THE MACHINE TO THE DIAGNOSIS. Thank you.

  fixed! went to beat the Control Panel audio and selected the right speaker (tv) setting. It allows to automatically so I assumed it would always be. Thanks for the quick response. Thank you all.

• Windows vista basic when I turn it on is to try to do a startup repair but can't, I can not connect my laptop

  ORIGINAL TITLE: Need help with this 1, you can

  I have a dell inspiron 1520 windows vista basic when I turn it on it is

  trying to do a startup repair but can't so I can't connect my laptop or anything

  with it so please can someone help me

  Hello

  Try to press F12 on startup and run the Dell, diagnostic tests.

  "How to run Dell 32-bit Diagnostics utility"

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=52057

  And here is the link to the Dell Forums; they may not know this error code:

  http://en.community.Dell.com/support-forums/default.aspx

  And here are the methods, if necessary, to reinstall Vista on a Dell computer.

  Since the recovery Partition;

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  And if provided by Dell discs recovery.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_339949&isLegacy=true

  See you soon.