Connect the buttons to play a single layer

Similar Questions

• Leave the button to play the audio only twice

  I am building an assessment of the foreign language with audio passages that the user must listen to then answer two questions about this. The user can play the audio twice. But even if I put 2 number of attempts, when I tested it, I was able to play the audio unlimited times. What is the trick?

  

  You seem to misunderstand the 'attempts' to an interactive object, will attempt to clarify. It does not limit the number of clicks ON the interactive object (here a button), but saying how many attempts can be 'impossible', which means clicking outside of the object. For your use case failure action would never happen, because the user always clicks the button, never outside it. Even with the project to continue that left you for the action failure: never happens.

  For the successful action, you use the command Play Audio, with project to continue unchecked: This means that the user can click several times, the playback head was never released, and audio can be played as many times as you want. The solution is to use a conditional, tip action (not a standard action because you want to allow 2 attempts, sorry David - TLCMediaDesign) and a counter variable. Here are the steps:

  • Set a user variable v_attempts with a default value of 2
  • Create a tip action to be triggered by the button that looks like this:

  

  It is always prudent to turn off the button before you hide it. Or you can just keep turn it off. This action also allows you to show the attempts left in a container of text:

  1. Before the first click: v_counter = 2
  2. After all, first, click on: v_counter = 1
  3. After the second click: v_counter = 0 and since it is more possible to click, there's = 0; This is important because CP is not very mathematical mind, does not see the difference between a negative and a positive number.

  It is also very easy to change the number of retries by simply changing the default value. Think it will be one of the (easy) scripts in my recipe book future actions. TNX for the question.

• Is it possible to connect the buttons to certain pages of a pdf document?

  I was wondering how do I create a button that specifically to open a specific page.

  Sure. When you create the button Add a command 'Go to page', appears in a floating window. Then, you open the file you want to link to, then navigate to the desired page. Then you click on the link "configure" in the floating window and the button will connect directly to that location in the other file.

• Get the button to play the timeline for the specified duration

  Hello

  I have an animation on board, and I'm doing a button that can play the timeline for a while and then stop, without the help of labels. So, I thought that if I put the button for sym.getSymbol("mysymbol").play (500);  This would make the chronology of this symbol for 500 milliseconds time game each click on the button, but it does not work, because it makes everything simply start playing at 500ms. So then I tried adding an action to stop after that:

  sym.getSymbol("mysymbol").play ();

  sym.getSymbol("mysymbol").stop (500);

  But it doesn't, because I guess that since these events are one after another, he does not expect 500 seconds to stop and he reads (500) stop immediately after the read statement, which did not work either. Can someone help me with this? I'm pretty new to javascript, but I really tried to learn with the API of edge for a few weeks now and still can't seem to solve this problem.

  Have you tried to use the setTimeout Javascript function? Maybe something like:

  sym.getSymbol('mysymbol').play ();

  setTimeout (function () {sym.getSymbol('mysymbol').stop ()}, 500);

  Have not had time to check if the code works, but I have used the function setTimeout to delay actions successfully in my own projects.

• Audio attached to the button "submit" plays at the beginning of the slide

  I created a text box with a "submit" button. When someone types in their response and clicks submit, text comments will appear and an audio excerpt explains the answer. I have attached the audio, the button submit, but when I go through the project that it plays as soon as the slide appears, not after the answer to the question. He does not appear in the timeline panel, but played when I go to the Audio tab of the submit button. As an aside, the audio on the success and failure of the feedback will be the same. Does make a difference? Should I attach audio to the legends of f/b?
  
  Any ideas on how to solve this problem?
  
  PS - the Captiv8er - you were so help kind it has everyone (me)! THX!

  Well, how about that? I am answering my own question...!

  With more tests, I found that if I join the audio for the legends of success or failure, she plays after the answer to the question. The audio was playing when the slide appeared first of all because I loose to the Submit button, which is visible from the beginning of the slide.

  Thank you, me! (Maybe I'm starting to find it?...)

• Add the button to play the Audio

  Rick and other experts, it should be easy, but heck, I can't make it work.
  
  Location: 6 Captivate slide 2 (any text, from PPT). Next navigation control button appearing a.5 and stopping at 5.5 no other objects or chart on the slide back and forth.
  
  Problem: I want to add a 'play' button, which will allow students to hear an audio summary of the information. However, I want the button to appear also a.5 seconds. I tried different variations, but no matter where the play button is or where the 'pause' is placed on the timeline, the audio still works without clicking. I don't want to do this.
  
  Any solution other than a jump to?

  Hello

  There should be several ways to do this.

  * If the sound is at the level of the slide, phase it so it's not 'appear' to a.5,.6 ou.7 seconds in. Then configure the button to pause seconds a.5.
  * Configure the button with a legend of success and set the audio to the legend of success
  * Insert the audio on the next slide and have the button simply open the next slide

  There are other ways as well. Just threw a little.

  See you soon... Rick

• problems with connecting the buttons within the OSM, at an another mso.

  Im trying to put in place the buttons nested in an mso to bind to a graph in an another mso. I can't find a work around... If someone has encountered this problem / have a work around?

  Thank you

  -LK

  Button for a MSO action cannot in an other MSO.

• Need help to connect the buttons

  Can someone help me with this problem I have.

  I have a gfx I created 6 forms and them transformed from simple buttons. I have URL was sitting inside an xml file. How can I get the buttons to use the URL of the value in the xml file?

  Also how can I change the current external photo which is responsible for loading the url of a framework in the same xml file.

  I hope you arnt as confused as I am right now.

  I packed the flash file that includes the xml aswell.

  If someone could help me with this, I would be very grateful.

  Thank you all

  http://www.onlineaddicts.co.UK/menu.rar

  Remove all btns code, paste it below on the main timeline

  Also, no need to charge twice as much than the dome in the image container...

  Give an instance name to the outer container of the btns - menumv

  Use the following of the openURL method, use the same one for all the inclinometer...

  	import flash.events.Event;
  	import flash.events.MouseEvent;
  	import flash.net.URLLoader;
  	import flash.net.URLRequest;

  var myXML:XML;

  var myLoader:URLLoader = new URLLoader();

  myLoader.load (new URLRequest ("links.xml"));

  myLoader.addEventListener (Event.COMPLETE, processXML);

  function processXML(e:Event):void

  {

  	myXML = new XML (e.target.data);
  	trace (myXML);
  	menumv.carbtn.addEventListener (MouseEvent.CLICK, openURL);

  }

  function openURL(e:MouseEvent):void

  {

  navigateToURL (new URLRequest (myXML.car.url));

  }

  --

  http://www.darshanrane.com

• Need help to connect the buttons inside a movieclip

  Hello

  I have five mcButtons inside a movieclip. I want to, so if the user clicks on the 1 mcButton it won't Stop on frame 2. I want then the other four mcButtons that were not clicked to stop on frame 2. Can't do the second part of this work. my code is below. Any help would be greatly appreciated.

  Thanks in advance

  prev08.Btn1.ID = 0;

  prev08.btn2.id = 1;

  prev08.btn3.id = 2;

  prev08.btn4.id = 3;

  prev08.btn5.id = 4;

  prev08.btn1.addEventListener (MouseEvent.CLICK, getXML08)

  prev08.btn2.addEventListener (MouseEvent.CLICK, getXML08)

  prev08.btn3.addEventListener (MouseEvent.CLICK, getXML08)

  prev08.btn4.addEventListener (MouseEvent.CLICK, getXML08)

  prev08.btn5.addEventListener (MouseEvent.CLICK, getXML08)

  function getXML08(event:MouseEvent):void

  {

  for (var i: int = 0; i < 18; i ++)

  {

  if(i == Event.Target.ID)

  {

  event.target.gotoAndStop (2)

  }

  on the other

  {

  prev08.getChildAt [i] .gotoAndStop (1)

  }

  }

  they all go to the same frame?  that makes no sense.

  If you want to run each in their own framework 1, except just clicked the button that should go to its Framework 2, direct all frame them 1 followed by the evt.currentTarget goes to frame 2:

  function getXML08(e:MouseEvent) {}

  for (var i: int = 1; i<>

  prev08 ["BNT" + i] .gotoAndStop (1);

  }

  MovieClip (e.currentTarget) .gotoAndStop (2);

  }

• Click the button to play and click to reverse

  I have a test button, I'd like to have play a movie where a chart is growing. Once stopped, I would like to be able to click on the same button and have the graphic go backward. I'd rather have chronology reversed, rather than extend the chronology of the mc, because then I have to align the beginning and the end, and if we change, I have to remember to change the other.

  I have:

  btn_test.onRelease = function() {}
  If (_root.adinstance._currentframe! = 1) {}
  While (_root.adinstance._currentframe! = 1) {}
  _root.adinstance.prevFrame ();
  }
  }
  else {}
  _root.adinstance.play ();
  }
  }

  I get the expansion but when when it hits the while, it disappears the adinstance mc.

  Any ideas?

  You rarely want to use any kind of loop coded to animate something, especially a while loop (they can be particularly unpleasant).  Try something more in the sense of...

  btn_test.onRelease = function() {}
  If (_root.adinstance._currentframe! = 1) {}
  _root.adinstance.onEnterFrame = function() {}
  If (_root.adinstance._currentframe! = 1) {}
  _root.adinstance.prevFrame ();
  } else {}
  delete _root.adinstance.onEnterFrame;
  }
  }
  }
  else {}
  _root.adinstance.play ();
  }
  }

• Wireless that connects the button, but I plug in USB

  I have a problem with the wireless light flashes but I want to use the USB port...

  The wireless light will not turn off so I can use the USB and I need to do a lot of printing.

  Download the user guide here.

  http://support.HP.com/us-en/product/HP-DeskJet-3050-all-in-one-printer-series-J610/4066450/manuals

  Here you will find your wireless information. The flashing light wireless can be ignored because you do not want wireless. Follow the complete directions on the USB connection. Do not insert the USB cable before said to do. You will also find all the software and drivers on this site.

• How to make a menu with the button this opening fade?

  I have built a menu animated in AE and had added text that melted by layer layers/buttons > still > create button. Once I have import into Encore through hotlinks I can't connect the buttons in the menu application.  I have added a sample.
  
  Basically all I want is the feature of game, selection of scene and credits to be selectable after completing discoloration in @ the: 20 mark. I don't want the menu's loop.

  I tried to do a static menu (from the last image in AE) play after that, but there is an a second gap or two before this static menu plays that look just sticky. I tried this in the preview, and it made on a dvd with the same result.

  All the tutorials I've met really does not answer this question either.

  Any help would be appreciated.
  
  Thank you

  So you're on the right track.

  This departure for a workflow I would try if I did more menus animated.

  http://help.Adobe.com/en_US/encoredvd/4.0/WSA5513911-0AD1-440C-BDAD-2E0E806B425E.html

• Does anyone know how to link a video full screen (No button graphics) as a button to play another video program in yet?

  Please see my post from 7/27 copied then:

  CS6 still...

  I need video loop as the first Full-frame play to act as a button (if activated) to read the main program.

  Since a file .psd is necessary to create a button, I created a file .psd with syntax layer as follows: SEE. SCREENSHOT OF PSD LAYER BELOW

  Layer group: (+) Motion Menu group < I have added a space on each side more sign for this forum only note, if I leave the spaces, it transforms into a chart >

  Under layer within the MM group: (%) Video

  NOTE 1: Under inner layer MM group has a mask layer specifications manual Adobe <see screenshot below >

  NOTE 2: Since there is no visible button, < any Full-frame video must act as a button > I don't understand a (= 1) to highlight the layer

  I imported the .psd two layers in still in the first Menu to play. SEE MENU AGAIN: MOTION TAB SCREENSHOT BELOW

  Then, in the properties of the Menu tab, I clicked on the motion tab and drag the video pick whip in the video asset file < menu.mov > in the project Panel to assign the 33:06 .mov video looping as the first play in the main Menu. (See Menu file name: Midnight swim main movement Menu_5 in the screenshot below)

  I do the same with the Audio selection on the same video resource icon .mov to play the audio track with the first play Main Menu.

  Once I have 'add the video background' and 'add audio' to the menu first Play through the selection icon. Rather than place the video in the .psd correct Sub-Layer box to the left of the necessary, creates a new locked layer "background" in the main Menu of Photoshop, but with the always correct to the menu.mov...

  See screenshot below where I had first to unlock the new layer, then I changed the name of the new layer (%) Video and finally he nested within the Group of layers as an Undercoat. So as the new layer does not have the compulsory mask, I add a layer with layer mask: Add a layer mask: reveal all. Finally, I save the .psd file to allow again to pick up the first listen change / hand menu .psd.

  But when I saw the project, the first video game playing on the preview. Which is OK because it is not rendered. Then, I made the Menu driven via the icon in the preview screen. But curiously, he restores the audio but NOTE the video as menu.mov assigned (preview is empty when finished rendering) and double strangely, it makes the appropriate length of the video from the video file program! < do not forget, the assets of video and audio right is assigned correctly in the main Menu: button tab properties MOTION - see screenshot below >

  Perhaps. because the button link play first is the video chapter program main named Midnight swim. (The button link IS correct because if the viewer active / click full screen on the first video game anywhere on the screen as a button, it is supposed to start the main program)

  Bottom line - the rendering should allow preview to play as the correct play first video resource (the 33:06 menu.mov) attributed the tab not query the link main program Midnight swim. I've never met this dysfunction.

  I have the manual .pdf CS6 online and a paper copy of the CS3 manual where I took care to implement the .psd file and the recall of programming so that everything works correctly. In ADDITION, I've done this before with success, but the only difference was that my previous effort was not full-screen video. It was actually more complicated with many buttons and a sector specifically where hidden video read. My point is that it worked perfectly using the syntax above, but for reasons I can't understand, don't worry this time. It must be my syntax layer .psd or something I'm missing or wrong in yet. Please see screenshot below also diagram again.

  Any experience with the help of video Full Frame as the first play, Please HELP! I'm on a deadline, as usual. Stan Jones, you're such a champion, are you there?

  I'll get the screenshots by your request and answer tomorrow morning, Lun Pacific time 7/27.

  Thank you

  Brian Patterson

  DVD - IT Media Services

  N. Hollywood, CA

  

  As always, I'm on a deadline.

  The part of the motion MUST BE the bottom (i.e. its own layer outside the button group). Do not use the prefix % etc. You will have only a = 1 in the Group of buttons and a background layer.

• The button works only once?

  The problem:

  Play the animation, and after clicking the button once it no longer works. The button takes you to the frame labeled "shake". I want to continue to make you "shake" whenever he's in a hurry, but it's not.

  The installation program

  I have a button inside a clip - actually its 2 inside. The first MC crosses and stops on the stop(); framework and that you click on the button that sends the playback head to the section titled "shake" which plays the next MC with the same button inside. I put the button action on its own layer on the first image. The length of this sequence of buttons from the first keyframe of the action is the length of time to the other MC 2.

  The Code

  mcButton.shakeButton.addEventListener (MouseEvent.CLICK, onClick);

  function onClick(event:MouseEvent):void {}

  gotoAndPlay ("shake");

  }

  What I found

  I searched the forum/web and in all cases that I met the problem above the toggle button is not the length of the visible button or other event listeners are in conflict with it. I don't know if one of them is my question. For 1 length of the frame of my button is so much time to the MC, which is the total length of the main timeline. If TI where a conflicting event listener to turn off that button should not play at all, because the event even listeners play before it than those who play after him. If I'm scratching my head for a direction.

  Are the 2 above known issues I found the problem that I have or do you know if it's something else?

  Thanks in advance!

  The second mc is nowhere in sight when this code runs within the Framework 1.  If the code for frame 1 is supposed to aim at the second mc to assign an event listener, it cannot.  Either the mc must be moved when the code is or the code should run when the mc is.  If you get no error messages, I have to wonder why.

  Functions and variables can be shared spread along a timeline in how you allocate this layer, but the code that runs, like play(), stop() etc, addEventListener() when you enter a frame, it happens that within this framework and does not extend to other images.

  What you can do, is have the second mc start frame 1 and make it invisible in this framework and then more later to frame 33 visible Tower.  Otherwise, you must have the event listener for the second mc code down into the fabric of 33.

• How to sync the button in the mainVI with a Subvi round?

  (1) son?

  (2) global variable?

  ================

  I want to stop some programs in Subvi execution by pressing the button in the mainVI. How to connect the button in the mainVI with a Subvi round?

  (1) son?

  It does work if I connect the button with the cycle via cables and connectors (from mainVI Subvi). That's because by the time press the button, Subvi has already asked the value (and it's remaining = FALSE until the Subvi ends).

  (2) global variable?

  I basically got same result.

  The position of the button is transferred to mainVI Subvi, but delayed.

  (3) the only solution I've found so far is to completely remove the Subvi and paste its code in the mainVI.But is not a good solution, because the code of the Subvi runs several times in a different parts of the mainVI.

  Thank you

  Solution: use a reference.

  Create a reference to the button in the main vi (right click on the button and select Create - reference).  Create a control on the front (Refnum palette - Refnum control) reference in your Subvi.  Connect refnum to a terminal.  In the main block diagram, wiring in the control reference at the entrance of reference Subvi you just created.  Subvi block, use node property to get the value of the order.  This will be a Variant, but you can use the variant data to convert it to a Boolean value.

  What is happening is that the reference that you pass to the Subvi is in fact an address (pointer) at its location in memory where the value is stored.  For example, when you click the home button, the value at this address gets changed.  Subvi, the property node can read the value at the same address because it is the address that you have spent in the Subvi.  If an instant change at hand is read by the Subvi.  Similarly, you can display an indicator of the Subvi for the most part, and it will update without having to wait until the end of the Subvi.