Connect the 7610 with USB cable

Similar Questions

• HP ENVY 7640e: can I connect the printer with a USB cable in addition to the Wi - Fi

  I just bought this printer and succeeded in setting up wireless.  Can I now connect it using a USB cable?  If the answer is 'YES', just make the USB connection, i.e. will be 10 Windows automatically adds the printer, or do I have to re - run the setup software and select the USB option?

  I would like to have the possibility of having the two configurations available for me to pick, i.e. be able to select the wireless printer or USB printers.

  Thank you.

  Hello

  The answer is Yes, you can connect USB and wireless. 10 Windows can install a generic driver for you to print but envy 7640 has many features, so you must install drivers to allow you to print and scan locally using USB and printer software.

  You need to connect to wireless internet to be able to use its full functionality.

  Kind regards.

• I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel

  I use Windows 7 on a computer to which a printer is connected directly by a USB cable.  I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.

  Can someone help me with this?

  Thank you.

  See http://www.winhelponline.com/blog/fix-devices-and-printers-completely-empty-windows-7/

  If this does not help, there is a very long thread here, which may include other suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/devices-and-printers-dialog-box-empty/353707a4-bcb0-4334-98bc-aab84747fecd?page=1

• computer not automatically standby (formerly titled "impossible computer automatically sleep when it is connected to the internet with modem cable")

  Hi, I noticed recently that my computer (Windows XP Media Center Edition 2005) is unable to sleep automatically when it is connected to the internet with a cable modem. Change the settings for my current power mode and try a different feeding regime (diagrams of Windows XP default power and power management, I created) only solves the problem for 2 days at most. I also tried to change the settings for the other power plans mentioned, and yet once again, the problem was only set for two days at the most. I also tried turning off my computer, restarting my computer, recording Powercfg /Restore Default policies in Run, saving sfc/scannow in Run, and again, I got the same result. Reset and power cycling the modem cable is not helped either. To help you better understand the problem, for example, if I had the date set for the screensaver set to 1 minute, the time for the monitor to turn off set to 2 minutes and time for your computer set to 3 minutes, the screen saver activate after 1 minute, the monitor turns off after 2 minutes, but the computer would not sleep mode after 3 minutes , even after an hour or more. I tried to check the Task Manager, and I have not noticed any process that would be interrupting the day before. However, I noticed that when I turned on the monitor by moving the mouse, even when the computer was unable to sleep and unplugged the ethernet cable from the cable modem and waited, the computer has entered standby as it should have.  I tried to find a solution for more than a week, contributions for this issue would be greatly appreciated. Thank you for taking the time to read my post. (Update: it seems that the problem is something else then my cable modem.)

  Hello

  Thank you for the update.

  This behavior can occur because of possible conflicts of third-party software, which includes the third-party security software.

  You can also temporarily disable third-party security software and firewalls installed on the system and check the issue.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: be sure to enable the security software on the computer after checking the issue.

  Note: When you perform a clean boot, you can activate services for the modem, network card and disable third-party services to check the issue.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Office Jet 4620: Connect wireless printer without USB cable

  I have a desktop HP 4620 jet.  He was hanging in my old router.  When I tried to join software router again asked me to use a USB cord.  I do not have a such cord for this printer and want to set using the wireless, but sofeward me continues to send at the option of the cable.  The router is ATT U-verse.  I need step by step instructions on how to connect the wireless printer.

  Thanks for any help.

  Hello

  HP Auto Wireless automatically sets the printer without connecting it to a USB port, only if your computer is also connected wireless to the network. If your PC does not have wireless connectivity USB cable would be necessary, except if your router supports WPS.

  If your PC is connected wireless to the router, restore the pritner as follows:

  1. Click on the WiFi the printer button and select restore network settings, confirm and invites.
  2. Click on the Setup (wrench) and select Tools, then restore the default settings and confirm any command prompt.
  3. Turn the printer off and turn it back on
  4. Open the HP Officejet 4620 software and follow the instructions to connect a wireless printer.

  Another option would be the WPS Pin Code or button WPS, if your router supports supported such a, tap the icon on the printer wireless and select WPS or Wireless protected Setup, follow the steps on the screen, press the button of your router or a PIN code, see the documentation for your router to check the capabilities of WPS.

  If none apply to your PC printer or yout, use a wireless computer connected or get a USB cable for the installation of hht, so a cable was supplied with the printer.

  Kind regards

  Shlomi

• How to connect the Ombudsman with several bpel process

  Hi Please someone tell me how to connect the Ombudsman with several processes bpel in soa 11g

  And here

  http://eoracleapps.blogspot.com/2009/11/how-to-call-synchronous-BPEL-process.html

• Printer LaserJet 4100: Should which cable I for Laserjet 4100 connected to the laptop with USB port

  I have the HP Laserjet 4100 printer. I bought a new laptop with USB ports.  What type of printer cable I need to connect the printer to my laptop? Is there some kind of printer cable adapter, or something else that will do the trick?

  I have the same question about my HP Laserjet 1100 printer.

  Thanks in advance for your assistance expected.

  If I remember correctly, the 1100 uses a cable "C", alias MicroCentronics.  Have never seen an adapter for that one.  On the 4100, you can get a USB to parallel adapter.  They are pretty cheap and available at most CESS (Consumer Electronics Super Store) as Best Buy.  Staples and OfficeMax/Office Depot should also wear.  Online is cheaper if you have time to wait.

  The thing with these USB converters is often must 'install' the cable first.  In other words, connect it to the laptop, then wait so he could install, then connect the printer.  Depending on your operating system and if you have correct updates that can be almost instantaneous, and you may not even see it pop on the screen.

  Best idea is that since these are obviously not portable machines, connect them to your router via a network card.  I had the 1100 years and used a cheap 170 X.  I know most recent are available which are faster.

  For the 4100, see if you can retrieve a Jet Direct 620 unit on eBay.  Probably less than $50 and sometimes even as little as $25.  Stay away from the 600, 510 or 615 cards.  Low or as the 600, they can leave your network open to hackers.  No need to get Gigabit cards as they will be well above what the 4100 can handle.

  Now, two of these old devices, processing power and memory can be a problem.  Never try to print documents online.  Save them on your laptop, and then print.  You will probably get communication errors if you print directly from IE or FireFox.

  If the 1100 does not die, not even worth fixing.  Put into a Fuser is a nightmare.  The 4100 will probably work for another 20 years if you keep to clean and replace the rolls before they cause jams.

• HP Deskjet 3515: Connection HP Deskjet 3515 to the network without USB cable

  Nice day

  I just changed networks and the need to install my HP Deskjet 3515 to the new network but I can't find my USB cable.

  Is - it possible configure the printer on my new network without USB cable?

  Thank you

  GatZza

  Hello @GatZza,

  Welcome to the HP support forums.

  I appreciate that you try to put your Deskjet 3515 on your network wireless without router.

  I would like to help.

  I got the following information from the Printers manual.

  To get started with Direct wireless printing

  1. to use live wireless, you must turn on Direct Wireless Control Panel and get the wireless
  Direct name and password if you have directly on wireless security:
  a. on the home screen, tap on wireless and then select settings.
  b. If the display shows that the wireless is turned off, select live wireless, then on (No.
  Security) or we (with security).

  NOTE: HP recommends that you turn on Direct wireless security. If you turn on safety, only
  users with the password will be able to connect wirelessly to the printer. If you disable security,
  anyone with a Wi - Fi device to the printer WiFi range will be able to connect to the printer.

  c. Select the display name to display the name Direct wireless.
  d. Select Show password to display the password Direct wireless if you live wireless
  Security on.

  2 from your computer wireless or mobile device, Wireless Tower, find and connect wirelessly
  Direct name, for example: 3510 HP-Print-XX-Deskjet series. If you have Direct wireless security, enter
  Direct wireless password when you are prompted. Then print as you normally would from your computer or mobile
  device.

  Open the integrated via Direct wireless Web server

  1. from the home screen, press the wireless button, and then select settings.

  2. If the display shows that the wireless is turned off, select live wireless, then on (No Security) or
  On (with security).

  3. from your computer wireless turn wireless on, to search and connect on behalf of live wireless, for
  example: series HP-Print-XX-Deskjet 3510. If you have Direct wireless security, enter in the wireless
  Direct password when you are prompted.

  4. in a browser supported on your computer, type the following address: http://192.168.223.1.

  When you reach the EWS printers, you should see an option to run the Wireless Setup Wizard.

  Run the wizard, and then follow the prompts.

• The HP software update is still my printer unable to talk to my PC with USB cable or wireless. Nightmare.

  I tried to do what I thought, it was a systematic HP software update on my printer, which has been very well. The software appears to install correctly, but then I could not connect wireless or even when I plugged a USB cable at the back. I restarted my computer and my printer several times. I retried the installation several time steps. Two hours later, I'm stuck, and I see no way to get any help from HP. At this point, I think seriously just junking my printer and switch to another brand that has his act together. Can anyone help? Of course can't do HP.

  Hello

  Normally, I will not let any product for my machines automatically update. Anyway, my suggestion: using Windows restore to restore the machine back to the point before the update.

  I hope this helps.

• Connection Satellite L750D to the TV with HDMI cable

  I tried to connect a laptop L750D to a Phillips TV but none is displayed on the TV and the message on the TV is «unsupported video»

  When I connected the laptop to the TV and turned on the laptop, it's in restart mode and the messages showed on TV, but as soon as windows has started to the top of the screen of the TV turned blue and the "unsupported video" message appeared.

  I then plugged a laptop HP pavilion g series to the TV with the HDMI cable and using the same port HDMI on the TV and the computer screen is appeared on television right now.

  Can someone help me please?

  Hello

  Try this:
  Both devices (TV and laptop) must be turned off but connected with a HDMI cable.
  Then turn on the TV and the laptop.
  After Windows has started, use the Fn + F5 secret key to switch the video output to TV.
  Is this possible?

  By the way: have you chosen the right graphic resolution and supported?
  Don't forget that you TV supports the resolution which has been chosen!

• Cannot connect the phone to the computer with usb (BSoD)

  When I put the usb cable to the computer immediately make a weird noise (such as electricity) and automatically "beeps" once, freezes and after 5 sec BSOD appears. I have LG P970 and Xp pro sp3 32-bit. I have a fix that worked for a while but then the problem happens again.  WHAT SHOULD I DO?
  Had the same thing with usb internet modem but I managed to fix that.
  Sorry for the grammar :)
  Can I just stopped bsod because my pc just can't burn down it's way to powerless. If you need more info, let me know that I am here 24-7, cause I need to send a file from phone to the pc in 2 days. so please help...

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  If you are overclocking STOP

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  Please follow these instructions to collect data against crashes and upload them here, to your Skydrive or a service such as Rapidshare file sharing.

  http://www.SysNative.com/forums/showthread.php/68-blue-screen-of-death-%28BSOD%29-posting-instructions-Windows-8-7-amp-Vista?p=303&viewfull=1#post303

  http://SysNative.com/0x8/BSOD_Windows7_Vista_v2.64_jcgriff2_.exe

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the contents of this folder
  Please, upload to skydrive or a file sharing service and put a link to them in your next post.

  Go to start > search/run > cmd > msinfo32 and include it in the upload

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  http://www.SysNative.com/forums/showthread.php/325-BSODs-but-no-dump-files

  http://www.osronline.com/article.cfm?article=545

  Please also go to start > run > msinfo32 and record the results.  Send it with the DMP files, thank you.

• the iPhone via USB cable connection does not work. Error code 37 - cannot initialize the connection. Sombody has a solution? Thank you.

  See statement above. connect iPhone via USB cable. Error Code 37 - cannot initialize the connection.

  Ah, a famous Apple error. See: http://support.apple.com/kb/ts1275 and http://support.apple.com/kb/TS3125

• Problems of transfer of files on the laptop with USB - Satellite Pro L100

  I have a Topfield Freeview box that connects to my Toshiba Satellite Pro L100 via a very short USB cable. The box can read MP3s that I add via the USB connection.

  My previous laptop added to hundreds of songs without any problem at all. However, this new Toshiba there are very particular problems.

  I can send files of the TNT box to the laptop via USB with no problems, but if I try to send files (for example an MP3) Unlike - laptop box - it stutter and often fail. From time to time an entire song (only 4-5 MB) may be transferred without problems, but normally, it will not work. As I said, I can send 100 MB s, the other direction and everything works fine.

  I tried transfer MP3s from my laptop and on the TNT housing with non-Toshiba laptop from a friend today and worked well. This collaboration with knowing I could do the same with my old laptop, suggests that the problem is clearly with the laptop. There must be a reason this notebook can transfer information via USB in a much better than in the other direction.

  Is there anything I can do to upgrade drivers or software to allow my laptop works properly?

  [Edited by: admin]

  I put t know why this happens and I can only suggest.
  For example on my laptop when something be transferred from an external source laptop and another way the software Anti Virus check all files and so it takes much more time.

  I just disabled the anti scan antivirus and firewall and the transfer was going faster.

  Eventually he s has the same problem on your laptop

• HP Envy 100 stay connected. Back to usb cable how? (Mac OS 10.5.8)

  I'm on a Mac (OS 10.5.8).  I just changed USB cable and wireless two days ago.  Everything was fine my Envy 100 D410e printing.  Today, it does not print anything - says it is not connected, but my diagnosis network says it all right.  So I would go back to using my USB cable.  How do I do that?  [One of the suggestions in the forums for this issue, I've seen offered a download 'fix' it was a .exe program.]  UH... for a Mac?  This is why I want to go back with a cable.  It is therefore not worth.]

  You respond once AGAIN to my own post... :-)
  I decided to uninstall and reinstall without going through
  the wireless configuration. I am now to USB
  mode and I'm happy. Wireless problems
  I read on the forums make me sorry
  I bought a wireless printer. Oh, well, I'm printing
  Once again!

• Tecra A6 does not connect to internet with lan cable

  I got a new Tecra A6, (windows xp) which is barely a week. fine, except that when I connect my router to the laptop computer with lan cable broadband, I am not able to connect to the internet. When I connect the cable to the internet, I'm getting the lan icon works correctly, but when I open a browser page, it says no connection.

  considering that wireless works fine.

  help appreciated.

  Check the firewall settings.
  Maybe the firewall is on and does not allow you to open Web sites.
  Please also check the internet option-> connections in the