It is supported to connect multiple monitors using USB as a video source?

Similar Questions

• Multiple monitors using RDP 7 in Windows Vista x 64

  I have two computers using Windows Vista x 64 and RDP 7, both computers have two video cards, however, there is no way to activate the two monitors with remote desktop.

  Here are some tips on the configuration of the machine running Office remotely:
  -Monitors have a different layout (Vertical and Horizontal)
  -Both computers have installed SP2
  -Both computers use the NVIDIA drivers
  -L' guest computer have no connected monitor

  Up to present all the post in Internet refers is a mandatory condition the same monitor settings; However, that statement is NOT true, because I have a third computer using Windows 7, with no connected monitors, drivers NVIDIA, using the same version of RDP 7 and I am able to connect to this computer using the monitors.

  Any idea on this problem will be appreciated.

  Thank you
  RM

  There is no support for multiple monitors in Vista (see: http://support.microsoft.com/kb/969084)

• multiple monitors using miniDP and HDMI

  I have a small question, I have 3 monitors (Acer and 2 DELL U2415).

  Currently, I want to have a configuration as follows:

  ACER-> MAC Pro via HDMI

  Both my DELL-> Pro MAC with MiniDisplayPort

  The only problem is, HDMI will work with a miniDP and the other monitor is not recognized and if disconnect the miniDP first then the second - the first and the second will work will not. Apparently he doesn't like HDMI 1 and 2 MiniDP.

  Then I took my ACER and used the HDMI / MiniDP and plugged (essentially the 3 monitors are on MiniDP) it works fine.  However, I think that the cable is not terrible because there are static in the image.

  Can you guys please help me on how to set it up so that my acer still uses the HDMI and connects to the Mac Pro and the other 2 Dells use miniDP cables.

  Thank you.

  Make sure that you have all the monitors on the same bus Thunderbolt.

  https://support.Apple.com/HT202801

• Multiple monitors use on Tecra M2

  I wish I could use 2 additional monitors on my Tecra M2, currently I use a docking station I plug a monitor extended in and that works very well, is it possible to hook up a 3rd monitor in the plug of the monitor on the right rear of the computer laptop itself and using it as a 3rd monitor? If so can you tell me how to operate as I tried this and have not yet had a bit of luck.

  Hello

  AFAIK, it is possible to use only one additional monitor.
  You can connect it to the RGB port on the right side or you said, you can use the port replicator.
  By using the FN + F5 key combination, you can choose between different output modes. I don't see any option that allows 3 monitors together.

• Unable to connect multiple computers using the router

  Original title: router WiFi has changed

  Hi, my router when initially set up allowed all our computers, phones etc to use the wireless connection, my brother connected to his laptop and now it will allow only one thing to connect both. If another device connects it disconnects one that was originally in line.  Do you know what it changed?

  Hello

  You can also try to contact the manufacturer of the router and try to reset the settings of the router and check if that helps you solve the problem.

• Impossible to get a maximum resolution of 2560 x 1600 on external monitor using DVI with Optimus video T420s

  Hello

  I have a T420s with Nvidia Optimus graphics card. I also have the ThinkPad Mini Dock Plus Series 3.

  When I tried to drive an external monitor via DVI, I can't get the full resolution of 2560 x 1600.

  I searched the forums and found several threads expressing problems with the implementation of the resolution of 2560 x 1600 per display port. Engineering even issued a new nvidia driver to solve problems. (http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T420-Unable-to-get-max-resolution-of-2560x1...

  I uninstalled my intel/nvidia drivers but also installed the latest lenovo driver according to the instructions on the previous post and I still can't get the full resolution of 2560 x 1600 on the DVI ports of the docking station. I tried two DVI ports on the docking station, and it still does not work. I tried enabling Optimus, discreet mode mode, etc... Nothing helps.

  However, if I try to drive the external monitor via the display of the docking port, I can get the complete resolution of 2560 x 1600.

  Anyone have any suggestions on how to fix this so I can use the DVI ports on the docking station?

  Thank you very much for the help!

  dvi on the dock port is single link dvi and not dual link dvi, as such, it supports WQXGA or WQHD resolution.

  In order to use the resolution WQXGA resolution, you must use the displayport, if you monitor is not a displayport then you must use an active displayport to DVI.

• Connect the Labtop using USB Port of labtop to TV USB Port will this work?

  How to connect my laptop to the tv via the USB Port of labtop on Port USB HDTV Compatible.

  Sony's Connect Via a USB port on the Emerson HD TV

  Thank you

  No, that won't work because the USB port on the computer is not a view of the port and the USB port on your TV does not have a display in the port.
  "Isis08" wrote in the new message: * e-mail address is removed from the privacy... *

  How to connect my laptop to the tv via the USB Port of labtop on Port USB HDTV Compatible.

  Sony's Connect Via a USB port on the Emerson HD TV

  Thank you

• I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

  Original title: multiple monitors

  I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

  Hi David,

  Thanks for posting your query on the Microsoft Community.

  I suggest you refer to the Microsoft Help Articles below and try the steps mentioned.

  Check out the link:

  http://Windows.Microsoft.com/en-in/Windows-8/how-connect-multiple-monitors#1TC=T1

  You can also check:

  http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• connection of two monitor using hdmi cables

  hp Hello Forum

  I want to connect two monitors using two hdmi cables, hdmi to dvi cable and an external graphics card.  The problem is, I don't know where to start? (what to connect to what?) I can do if I have easy to follow instructions or illustrations would be gr8, thanks in advance :-)

  Sorry... I just noticed that we have discussed your configuration before. May I ask if the previously suggested configuration did not work? What prompted the purchase of the USB graphic card?

  Display USB adapters are designed mainly for the non-graphiquement intense... Adding screens for things like spreadsheets, documents word, daytrading, presentations, etc. The display adapter using USB can cause a lower performance than using the native chart AMD Radeon HD 7570 card. I suggest that you avoid using the USB graphic card, if possible. Depending on your selection of available cables, if suggests using one of the following configurations;

  (1) computer > HDMI cable > monitor and the computer > cable DVI > monitor (recommended)

  or

  (2) computer > HDMI cable > monitor and the computer > DVI-HDMI cable > monitor

• How to connect a laptop Windows XP Home Edition on a monitor using VGA.

  Hello

  I have a broken HP Pavilion DV1000. I don't see anything on the screen when it is tilted to normally, so I have to bend down a little to see something. for this reason that I want to connect to an external monitor using a VGA cable. Connection of a monitor on a computer Windows XP is not as simple as do on a Windows 7 PC. I don't want to extend my desktop on the monitor, but want to show my desktop on the monitor. With Windows 7, it is not a problem.

  Please give me some advice!

  Thank you.

  Hello

  Try the steps mentioned in the link

  How to configure and use multiple monitors in Windows XP

  http://support.Microsoft.com/kb/307873/en-us

• XPP windows does support multiple monitors (above 3 monitors)?

  XPP windows does support multiple monitors (above 3 monitors)?

  XPP windows does support multiple monitors (above 3 monitors)?

  Windows XP should be able to use up to 10 monitors.  However, you may need to use your video device software to manage them as you wish.

  How to configure and use multiple monitors in Windows XP

  "Windows XP makes it possible for you to increase your productivity by using multiple monitors to increase the size of your desktop. With the use of up to ten individual monitors connected to a single computer, you can create an office that is large enough to hold many programs or windows. »

  You can also obtain this information from the built-in in Windows XP Help system.  (Press F1, which should bring up & assistance.  Type "Multiple monitors" in the search field.  You should find some information).

• NB520 - support for multiple monitors

  NB520 they supported multiple monitors built in, if not, how can I have multiple monitor support my NB520? I need to use a Pewerpoint 2007 (presenter to display mode differs from the public view).

  Thanks a lot for a response in advance.

  Hi smit_Aood,

  The NB520 supports an external monitor and you can use the internal monitor + external at the same time (both monitors are supported). In addition, you can choose if you want to extend the desktop on the secondary monitor or to clone.

  Using the FN + F5 key combination, you can switch between different modes.

  Last but not least, you can use also a video projector or a TV as a second monitor. A certain computer screen is not necessary. ;)

• Use multiple monitors with Client view

  Hello

  Quick question regarding the use of multiple monitors when connecting via the customer to view. I have many users using a monitor with a zero multi configuration client and everything works as expected. When connecting via customer discovered however the Office extends on (i.e. Outlook stretches on left and right screens) two monitors instead of 'renewal' (i.e. the prospects on the left monitor, acrobat opens on the right). Everyone is aware of a fix for this?

  Thanks in advance.

  See you soon.

  Are you sure that you are using PCoIP?  View what version do you use?  Which version of the Client that you are using a view?

  Gunnar

• The ipad pro supports multiple monitors with different content on each screen?

  I want to replace my laptop with an ipad pro.  Currently I drive three screens with my laptop, all with different content (VGA, HDMI, laptop screen) with no additional adapters.  The Ipad pro has a video card that will allow me to run multiple monitors (3 including the pro) with different content on each monitor?

  Given that the pro iPad running iOS and iOS do not supports multiple monitors, I would say no. I may be wrong, so feel free to correct me.

• Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

  Original title: unable to disable my lan connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I turn off my connection to the local network, it is showing message.

    It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Please answer soon

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi MVTDA,

  You can try the following methods and check to see if it helps:

  Method 1:

  a. Click Start and select run, type cmd and click OK.

  b. type net stop cryptsvc and press ENTER.

  c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

  d. restart the computer.

  e. open new command prompt and Type net start cryptsvc, and press ENTER.

  Method 2:

  If the same problem persists then you can try to uninstall the network drivers and check.

  a. click the Start button. Select run, type devmgmt.msc and press OK.

  b. Select the network card and right click on it.

  c. now, select Properties.

  d. in the Properties window, on the driver tab, click Uninstall.

  e. After you have uninstalled the drivers, restart the computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.