Connect the MacBook Pro to Photosmart on the network

Similar Questions

• Unable to connect to Macbook Pro and Photosmart 4580 via Wi - Fi

  I can not get the Wi - Fi connection works!  I took all the troubleshooting steps listed for this problem.  Wireless shows that it is active on the screen of the printer and the signal is strong.  When I go through the steps to set up the Wi Fi connection it takes forever to establish a connection, then when I try to connect is says that the network is unavailable.  In addition, the HP Solution Center does not seem to load on Mac OS X.  Is there another way to access the network printer settings?

  What kind of wireless router you have and what devices are connected on it?

  Can you access the printer's internal web page by accessing its IP address?

  If you can browse the printer web page, then we know that the printer is on the network.   The next step is to try to try a simple test only print.  Go to System Preferences and go to the Print & Fax applet.  Press on the + to add a printer and you should be presented with a list of all the printers on your network.  Select the C4580 / Hello 'Use of Print' select HP Photosmart P1100 - Gutenprint v5.1.3 and press 'Add '.  Now check and see if you can print to the printer.

• I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can you help me

  I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can anyone help?

  You must use the volume control on the monitor. That's how Apple means yo do and does not provide any method using Mac

• I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  OS X El Capitan: use your TV as a monitor

• I am trying to connect a Macbook Pro with Retina display for a new monitor Dell Ultrasharp 3014. I tried to connect via HDMI and DVI cable supplied with the monitor but the monitor says "no cable dvi - d".

  How to connect a Macbook Pro with the (just bought) Retina display for a Dell Ultrasharp U3014's new? I tried to connect with HDMI and DVI cable supplied with the monitor but the monitor says "no dvi - d" cable. I never tried to do that before so I'm lost.

  Use a mini-displayport cable. Connect to one of the ports Thunderbolt the MacBook Pro to ultra-compact monitor entry.

• Can I connect my MacBook Pro (13-inch 2011) with my Samsung TV with just a crush for a HDMI cable?

  Can I connect my MacBook Pro (13-inch 2011) with my Samsung TV with just a crush for a HDMI cable?

  I mirrored displays in the preferences (and it is optimized for Samsung 1440 x 900)

  But my TV says "Mode not supported" on display...

  Any ideas appreciated...... has soon

  You should be able to.

• Connect a Macbook Pro to a Macbook Pro

  Can I connect my macbook pro 17 "firewire to my new macbook pro 15" love at first sight? I want to put the 17 "in target mode. Any other suggestions. Steve Jobs prayer did not work and Wozniak is not taking my calls.

  Yes.

  (137543)

• Need to connect the network adapter when the ethernet cable is not connected

  Hi all and thanks for reading.  I'm new to the both VMWare Fusion and new on Mac.  I have a new MacBook Pro, I bought a month ago.

  I have software that works only on PC and its license server is linked to the mac address of the NETWORK card.  I am implemented on bridged network mode I use the multiplicity to link the Virtual PC to my other PC and it seems the network mode that works best for this.

  I've set up to work with the virtual address of the NIC card and everything works fine.  The problem comes when I'm traveling and my Mac isn't difficult, connected to an ethernet connection.  When I start the merger, told me that 'the network bridge on/dev/vmnet0 unit does not work"and that she didn't connect the device virtual ethernet0.  Under the terms of the merger, I get this error whenever I try to force the card /virtual machine/network/will connect the network adapter.

  When I'm traveling or not hung, I need to get the virtual running NETWORK card so my license server will take place so that I can run my software.  Any ideas?  Any help is most appreciated!

  Thank you

  Mark

  Change the type of the bridged network to NAT and then start the virtual machine.

• C - USB VGA card cannot connect to Macbook pro Multiport

  C - USB VGA card cannot connect to Macbook Pro Multiport

  Writing an effective question of communities of Apple Support

• How to connect my Macbook pro (early 2011) with an Intel HD Graphics 3000 512 MB to a LG34UM57-P for the resolution of 2560 x 1600 pixels?

  The maximum resolution that I receive is 1080 p not 2560 x 1600 (21 x 9 aspect ratio - ultra wide angle). My adapterw of the display is a Lindy Adapter Mini displayport to VGA/HDMI cable is a normal black HDMI cable.

  Any suggestions please?

  Yes... go to Preferences system, then poster and Option + click on scale and see what it does for you.  You should be able to get the maximum

  resolution on this monitor, which, as you mentioned is 2560 x 1080. Maybe you could go with just a displayport cable to connect the monitor to your MacBook Pro. I don't know exactly what model or year of MacBook Pro you have, but I guess it's fairly recent. The lindy adapter will do up to 2160 p and not more, so there is that... the only other thing I know is SwitchResX, but you would have to pay a little for that...

  so, here's my suggestions, aside from trying an adapter that supports the WQHD... (loan from 4 k) that is all I have

  John B

• Connect two Macbook Pro retina to create the extended desktop

  I have two Macbook Pros retina 15 inches (personal: mid 2012, work: mid 2015). They are both under OS x El Capitan 10.11.3

  I would like to connect them to create a wide area network.

  Am I wrong? Is there a way to share the two opens with a bolt of lightning?

  I don't understand what you're trying to do. In your message your refer to:

  1. create the extended desktop

  2. create a WAN

  3. share the poster

  That is what you try to do?

• Using Apple ID them to connect to Macbook Pro

  Hello

  I used to be able to connect to my macbook pro with my apple ID and password. However, recently I had to restore my macbook and pure install El Capitan, and since I see no possibility to use my apple ID to sign in my macbook pro. I must necessarily use the local user name and password to connect.

  Can someone please explain the steps to activate the connection to my macbook pro using my apple id?

  This option has been drained in El Capitan. If you went to El Capitan, he would still continue but with a clean install of El Capitan, you cannot configure with your Apple ID.

• How can I connect my MacBook Pro at home at my iMac at work?

  I have a laptop MacBook Pro that I use at home. I have an iMac at work. Both can connect to the Internet. How can I connect to the MacBook Pro iMac when I'm at home?

  Here are some ideas

  Away from home? Here's how to do to access your Mac remotely. Macworld

  3 ways free to connect remotely to the desktop of your Mac - how-to - Geek

• Mac Mini to connect to MacBook Pro

  I have a MacBook Pro at the beginning and I would like to use it to burn a DVD on my Mac Mini.

  How I'd plug it in for best results?

  Remote Disc/disc sharing does not work for burning

  Use the CD or DVD drive from another computer with your Mac - Apple Support

  Googling is not conclusive if you can burn by connecting the two via FireWire, Mc on optical disc in target disk mode and the other starts normally and then burn using the drive Mode target to the Mac thanks to the optical drive.

• How to connect a macbook pro retina to an external VGA monitor

  I have a MacBook Pro of the retina on OS X El Capitan 10.11.3 running. Previously, I could connect a previous MacBook Pro (late 2009) to an external VGA monitor. I was told on the Apple store I could use the mini display in a Flash port dongle to connect to a VGA cable, but when I tried this, the monitor could not get a signal. Is there another dongle I should use? I have a HDMI cable which I assume will work with most modern projectors, but I really want to go to this old VGA monitor for editing in iMovie.

  If you go to  > System Preferences > displays made outside monitor to see the place? You want to make sure that the mirror/extension development is enabled. Also, how old is your MacBook Pro?