Connect to the Web server

Similar Questions

• WANT to 114 does not connect to the Web server

  Have installed a 114 WANT, everything works except for the webservices - wireless eprint etc.

  I tried everything-

  1 re-install services - error cannot connect to the web server

  2. Update - error cannot connect to the web server

  3 give the static IP address

  4 restore the default settings

  I have an internet connection on all computers.  Can someone give me a hint on how to get Web services to work?

  Hi sbenzie,

  How your printer is currently connected to the network? Via Ethernet or wireless? What is your current router / network configuration? That shows your printer because it is the IP address? What happens when you try to launch applications?

  Not yet given the information above, here's what I would try.

  I suggest to reconnect the printer to the network by running the Wireless Setup Wizard and attempt to restart the web services. If this is not enough, you may change some DNS settings in printers EWS (built-in web server) to do this, put the IP address in a browser window on your PC.

  This should start the integrated Web server. In SAP, select the network on the network tab, select 'network '.

  Then select "network address" (IP). Do not change the IP configuration at the top. Go down under "DNS address configuration"and select 'Manual DNS server'. " Under manual DNS server, enter (an 8 in each box on the first line) 8.8.8.8 and 8.8.4.4 on the second line. Press the button 'Apply' at the bottom.

  Now try to connect to Web Services again.

• I can\ to connect to the web server integrated on my D7460?

  Hello

  I had some problems with my Photosmart D7460 printer and resolved (for now) most of them.

  Except that I can't connect to the built-in web server. Also, I do not get a response when I try and ping the printer.

  Giving to think I have problems of network with the exception that I can print to this printer... Well well, from most of the computers on the network, but that's another story.

  I checked what the said road IP address he gave to the printer.

  Any suggestions would be welcome.

  OK, I seem to have solved the problem.

  I'm not sure that bit of material, it was causing the problem but it seems to come form tries to use "WPA & WPA2" parameters (BT Home Hub 3.0) wireless access point.

  Who having spent 'WPA only' I can now ping, print and connect to the web server.

• Install second connection to the web server at DB 10R2 running Apex 3.0.1.00.08

  All,
  
  I'm trying to add a second web server to move a part of the web traffic to another resource. I have a 3.0.1.00.08 instance that runs on the database connected to the web server and I just wanted to add a second connection to the front-end web server.
  
  The second is web server currently running SOA suite so it was logical financial to simply add another call on this web server.
  
  ServerA (existing web server) to connect successfully to the server b (existing database server).
  ServerC (new web server) to be connected on server b.
  
  Directory copied apex and images ServerC ServerA
  
  TNSNAMES. ORA on ServerC located under ORACLE_HOME\NETWORK\ADMIN
  ORCL =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = ServerB.Address)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SID = ORCL)
  (SERVER = DEDICATED)
  )
  )
  
  Server c, I use SQLPLUS to connect to server b using APEX_PUBLIC_USER, correct password, ORCL
  
  Change ORACLE_HOME/Apache/modplsql/conf/dads.conf on ServerC
  
  Alias is ' ORACLE_HTTPSERVER_HOME\Apache\images / '.
  AddType text/xml xbl
  AddType text/x-component htc
  < /plex location >
  Order deny, allow
  Docs PlsqlDocumentPath
  AllowOverride None
  PlsqlErrorStyle DebugStyle
  PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
  PlsqlDatabaseConnectString cn = orcl, cn = oraclecontext NetServiceNameFormat
  PlsqlNLSLanguage AMERICAN_AMERICA. AL32UTF8
  PlsqlAuthenticationMode Basic
  SetHandler pls_handler
  PlsqlDocumentTablename wwv_flow_file_objects$
  PlsqlDatabaseUsername APEX_PUBLIC_USER
  Apex PlsqlDefaultPage
  PlsqlDatabasePassword correct_password
  Allow all the
  < / location >
  
  Restart HTTP_SERVER on ServerC.
  
  I get the error:
  Journal of the database failed
  
  TNS is unable to connect to the destination. Address provided is not a valid TNS or destination is not listening. This error can also occur due to underlying network transport problems.
  
  Ensure that the TNS name in the entry of the DAD for this URL connection string is valid and the listener of the database is running.
  
  ORA-12170: TNS: Connect timeout occurred error-Code: 12170 error TimeStamp: kills, 16 December 2008 20:35:58 GMT
  
  I thought it was weird since it's what worked on the other server and using sqlplus.
  
  I also tried to change the dads.conf file to use the following connection string:
  PlsqlDatabaseConnectString SERVERB:PORT:ORCL ServiceNameFormat
  
  No luck. Why the connection work with SQLPlus and not modplsql? What I am doing wrong? If not, how can I solve this?
  
  Any ideas?
  
  Thank you
  Keith

  Keith:

  Try to use the "SIDFormat" in dads parameter 'PlsqlDatabaseConnectString' instead of 'ServiceNameFormat '.

  CITY

• WebBrowser connection to the Web server

  Hello
  
  Have a question: -.
  
  How does the connection appears of the Webbrowser to the Web server in obiee 10g? I installed the obiee 10g in my vmware machine and disabled the Internet Protocol, but I see still works, you want to know how does it work?
  
  Thank you
  SM.

  He will work with the Intranet... Not with the internet...

  Mark as correct if it is useful.

• Unable to connect to the web services server

  Unable to connect to the web services server.  It is a common error that you might see if you try to enable web services.  If you receive this message, try the following steps.

  For Officejet printers

  1. open the internet browser type printer IP address.

  2 should bring you to the status of the printer page.

  3. Select the tab network at the top.

  4. left side select IPv4 under wireless.

  5. under DNS address Configuration select manual DNS server.

  6. for favorite enter 8.8.8.8

  7. for alternate enter 8.8.4.4

  8. Select apply. You can get a warning saying that this could break the connection which is very good.

  9. turn the printer off for about 30 seconds and then try to enable web services.

  For Photosmart printers

  1. Enter the printer's IP address in a browser.

  2 Select the network at the top of the page.

  3. on the left, select network.

  4. Select Network (IP) address

  5. select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  6. Select apply you could get a fair warning select OK

  I hope this helps!

• Error - 'Auntentication with the server failed. Family Tree Maker software does not connect on the Web dashboard.

  Original title: Family Tree Maker does not connect on the Web dashboard.

  My Family Tree Maker 2009 does not connect to the Internet comes up with the message which is cannot authenticate the server, but it tells me that my version is up-to-date.  He has always worked so far? Comes with the following message if I try to do anything that involves the net.

  "Auntentication with the server failed.

  Hi HelenTL,

  You did changes to the computer before this problem?

  If you have any software security & firewall installed, disable them temporarily and check if the problem persists.

  
  Note: check to allow them back on the computer after you complete these steps.

  Hope the helps of information.
  Please post back and we do know.

• problem connecting to the web services server

  I tried to download the latest updates of software/firmware for my all-in-one HP Photosmart Prem C310a.

  I can't get updates or activate Web Services because it still gives me the error message "problem connect to the web services server.

  I tried everything in the section of the Web of HPs site including connection via WPS - unsucessfully problems.

  I understand that you have found impossible to connect to the server error message on your printer. I would first disconnect the router and the printer for about 1 minute. I would plug the router first then the printer. I would then try to enable web services. If not successful, and you get the same error message. I'd follow these steps.

  1 obtain the IP address of your printer
  a. This can be done by pressing the icon on the printer wireless.
  2. Enter the printer's IP address in a browser.
  3. Select the tab network at the top of the page.
  4. on the left, select network.
  5. Select Network (IP) address
  6. select manual DNS server
  a. manual Preferred DNS should read 8.8.8.8
  b. alternate DNS server should read. 8.8.4.4
  7. Select apply you could get a fair warning select OK.

• Unable to connect to port 80 on the web server on host Ubuntu guest

  I have a very strange problem. I've been running a VM of 14.04 Ubuntu on my MBP under VMware Fusion for some time. I have re-installed Yosemite during the weekend for a clean installation trying to solve some of the problems I had. I now have my Ubuntu VM up and running. All right, except that I can't hit the web server on the virtual machine.

  I can access the virtual machine in a variety of different ways!

  • Ping: I can ping
  • SSH: I can ssh in
  • psql: I can connect to the database remotely via port 5432
  • NFS: can I get the files of the virtual machine files on my hard drive
  • Tomcat: I can access my web application directly through Tomcat on port 8080

  When I do a scan of port of the virtual machine, I get this:

  Port scan started...

  Host port scan: 10.39.186.13

  Open TCP Port: 22 ssh

  Open TCP Port: 111 sunrpc

  Open TCP Port: 389 ldap

  Open TCP Port: 2049 nfsd

  Open TCP Port: 5001 commplex-link

  Open TCP Port: 5432 postgresql

  Open TCP Port: 8000 irdmi

  Open TCP Port: 8080 http-alt

  Open TCP Port: 8104

  Open TCP Port: 37805

  Open TCP Port: 41301

  Open TCP Port: 42060

  Open TCP Port: 55224

  Open TCP Port: 60974

  Port scan has completed...

  Port 80 is not even there. The virtual machine itself, I can access the site via port 80:

  wget xnat@xnatdev:~$ http://xnatdev.wurstworks.com

  -2015-06-22 11:20:50- http://xnatdev.wurstworks.com/

  Resolution xnatdev.wurstworks.com (xnatdev.wurstworks.com)... 127.0.0.1

  Connection to xnatdev.wurstworks.com (xnatdev.wurstworks.com) | 127.0.0.1 |: 80... connected.

  Query HTTP sent, awaiting response... 302 Found

  Location: http://xnatdev.wurstworks.com/app/template/login.VM;JSESSIONID=18A2C3A7C7AB6A63F39F7AC49E54FCD4 [next]

  -2015-06-22 11:20:50- http://xnatdev.wurstworks.com/app/template/login.VM;JSESSIONID=18A2C3A7C7AB6A63F39F7AC49E54FCD4

  Reuse an existing connection to xnatdev.wurstworks.com:80.

  Query HTTP sent, awaiting response... 200 OK

  Length: unspecified [text/html]

  Record on: 'index.html '.

  [ <=>                                                                                         ] 12,818      --.-K/s   in 0.001s

  2015-06-22 11:20:50 (11.2 MB/s) - 'index.html' saved [12818]

  But the host OS, I get this:

  wget rherrick@Aerys:~$ http://xnatdev.wurstworks.com

  -2015-06-22 11:21:50- http://xnatdev.wurstworks.com/

  Resolving xnatdev.wurstworks.com... 10.39.186.13

  Connection to xnatdev.wurstworks.com | 10.39.186.13 |: 80... has failed: connection refused.

  I tried switching between NAT and open networking (I know that I had to work with NAT before, but I'm willing to try anything at this point).

  I'm on OS X 10.10.3 and the most recent, and VMware Fusion 7.1.2. Any ideas on how to get this working would be greatly appreciated!

  OK, got it market. The issue was the listen directive in configuring nginx for connecting Tomcat. I'd put it domain name FULL and port 80 on the server, but something I did is the determination of the FULL domain to 127.0.0.1 instead of the IP DHCP-published name. If this does not work because the incoming request has been the full domain name of host configured in my/etc/hosts, OS, then nginx not pair together configuring nginx for the domain since listening has been screwed up.

• Last update has screwed up to connect to the IMAP server.

  The last update for Thunderbird seems to have changed something so that the connection to the IMAP server. All new messages downloaded but have not read a 'Loading Message' in the status bar. When it finally disappears content downloadable (web related) does not appear. In addition, I can send is no longer emails. The server times out. Worked fine yesterday.

  To diagnose problems with Thunderbird, try the following:

  • Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.

• HP8600 does not connect to the ePrint Server

  HP8600 does not connect to the ePrint server at all. I double checked all the settings and I can print to it from my applications when you are connected to the same network, but try to access the server of ePrint from the screen of the printer or the web interface cannot establish a connection.

  The printer is connected via a wireless network and can be printed from any device connected to our network.

  Everything indicates that there should be good. But can't seem to make bad connection ePrint. No error message not developed.

  The printer is on a network of b/g/n 2.4 GHz connected to a Netgear N600 DUal Band (WNDR3700 model).

  Version of the firmware of the printer is CLP1CN1232AR

  Any ideas? It does not appear to be blocked by a firewall, so really lost here.

  Hello

  Try to define an alternative DNS and check if that can help you:

  1. Tap the wireless on the top of the screen of the printer and look for the IP address is.
  2. Navigate to throguh IP of the printer, the web browser on your PC.
  3. Click the network tab.
  4. Under, click IPv4 wireless.
  5. Under the DNS Configuration, select manual.
  6. Set the address preferably as 8.8.8.8
  7. Set the e-mail address alternative as 8.8.4.4
  8. Click on apply to confirm the change.

  Now, turn the printer off and turn it back on and check for the difference.

  Shlomi

• How to allow the clean-up actions to be taken by a reentrant clone before he is killed, seen through the web server, through a narrow browser?

  Here's a question I'll get lucky with.  I have a VI, set to be reentrant, broadcast via the web server.  The main instance of the VI is never worked with: it's a clone whenever someone accesses the correct URL, and the user interacts with the newly created clone (never the main forum).  A clone is able to configure and calling instrument VI when good IDs are entered, which translates to browser popups that are controllable on the end of the user (even if only one user ever does both. To clarify, many clones can be opened simultaneously for connection purposes, but that a user never interacts with the instruments that are not themselves reentrant).

  If the user clicks on my Logout button in their browser, it is trivial to close these instruments other, independent and properly clean.  But if the user simply click on the red X in their browser, it is non-stop and the instruments that the clone called stay open on the server, when they close.

  My experience so far:

  No close panel? event seems to be triggered in the clone.  The clone simply cease to be.

  The remote_panel_connections property doesn't seem to work properly in this case (I have not had luck so far), since it is possible that more than a clone to be active and that the main parent who is spawning clones stays running, but is not interacted with in some way.

  What I need:

  One way for the clone of VI recognize that the user has closed his browser and communicate that it closes all the assets of VI before ending.

  --------------

  I would like to avoid forcing the instruments that the clone call to constantly query to see if the VI clone is present on the network.  If there is no other solution, but this, I would appreciate a suggestion as to the intensive way less code and resources to implement this type of interrogation, as the instruments are really designed to be totally independent after they are called, rather than under vi.

  Thanks for all comments, let me know if you need more information.

  MTdev wrote:

  One way for the clone of VI recognize that the user has closed his browser and communicate that it closes all the assets of VI before ending.

  When a VI stops running, any reference as a queue is also cancelled.  You can make use of this fact.  If your original clone VI could launch a second reentrant VI, which remains active, you could channel all communications to the instruments via VI second using a queue created in the first.  When the first VI disappears, it will trigger an error waiting waiting VI in the second (no vote office is involved).  The second VI can take all the necessary measures.

• OfficeJet 6100 x (H611a) will not be re - connect to the eprint Server

  My printer HP Officejet 6100 (H611a) has been connected to the server eprint for over a year.  A few days ago when I tried to print from my tablet, he told me that I was no longer connected to the server.

  When I went to the page of the built-in web server, it showed that I had lost the connection and was an icon that says 'fix it '.  I tried the reconnection to the server by clicking on this icon for several days without success.  He would say "unable to connect to the server.

  Finally, I tried to cancel the registration of the printer and tried to start over.  Now whenever I try to save the printer it says "unable to connect to the server.

  I tried this for about two weeks, without success.  Any help would be greatly appricated.

  Hi scthom,

  Welcome to the Forums of HP's Support.  I understand that you get a connection error message when you try to connect to the web services of HP to use ePrint.

  My feeling is that there was an update to your router or modem firmware and this update is causing the printer to communicate with HP.  Please define Manual of the printer an IP address manually and DNS servers.  I've included a link to another post with measures, including screenshots, of how to do it.  Don't worry that the screenshots are for an Officejet 8600 the steps are the same.

  Please let me know how it goes.

• asked when selecting printer password to connect to the Web - 5530th

  "When I select ' printer connect to the Web ' the first thing I get is a problem with the sites security certificate message.  Then a message "i.e. explorer.exe 10.0.0.5 server is asking for your user name and password."  The server indicates that it is from admin. "What password he seeks.  My administrator password does not work.  Any ideas would be most appreciated Win8.1 64-bit, Toshiba laptop

  There are two ways we can know who is responsible for the error, restore the default settings of the printer network, or try a different web browser.

  It seems to me that the built-in Web server opens in Internet Explorer. In order to have the Embedded Web Sever open in another browser, you open Firefox, Google Chrome, etc. On the printer, press the wireless icon and it will show the IP address.

  In the other open browser, type printers I.P address in the address bar. It should load the page you had before with the tabs at the top. See if the password is always asked for.

  If the above fails, the menu on the front panel of the printer, press the wireless icon, and then default network. Connect the printer to your network and then try to load the built-in Web server (be it office or enter the I.P icon).

  Let me know the results.

• run the Web server in vmware

  Hello
  I run the Web server in the os(xp pro) host and now I want to run the Web server in the guest operating system
  I put things in the host operating system, follow
  router setting page (shared ip settings page)
  1 DHCP using OFF
  2 DMZ host server using on 192.168.10.201
  3. setting of virtual server 192.168.10.201 port TCP port internal external port 81 81
  TCP/IP
  1 use the following IP 192.168.10.201
  2 gateway 192.168.10.1
  3. the DNS settings of
  4. on the Advanced tab > Internet connection sharing > VMware Network Adapter VMnet 8
  for now, when someone tries to access my WAN IP then page host server is apear (from external network)
  If I stop server Web host then cannot access my WAN IP

  and in VMware, I put the (Windows XP Pro)
  TCP/IP configuration
  1 use the following IP 192.168.88.201
  2. default gateway 192.168.88.2
  3. the DNS settings of
  4. click the guest OS tab and click Edit > virtual network editor > NAT VMnet host is VMnet8
  5. setting NAT > Port forwarding > Add >: host port 81 machine virtual ip address 192.168.88.201 port 81
  and at the moment access to 192.168.88.201 in the guest operating system is ok the page is apear
  but nothing is apear when try and access my WAN IP external network and if I start it the host Web server then the host page is apear that im is not the intention of
  How can I make the Web server of the guest to access other networks operating system?
  in the guest operating system, I can access Web server of the customer by access 192.168.10.201
  but I can't access Web server of the client by typing host operating system access the 192.168.10.201
  any ideas? My version of vmware's vmware-workstation - 6.5.2 for windows

  Hi Teayun,

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to VMware and would be better suited to the VMware or TechNet community. Please visit the link below to find a community that will support what ask you

  http://www.VMware.com/support/
  http://TechNet.Microsoft.com/en-us/default.aspx Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think