computer to the printer print

Similar Questions

• My 3070 and says he can print t! Same IP address on the computer and the printer. What can I do? CC = is

  My 3070 and said that he can´t print! Same IP address on the computer and the printer. What can I do?

  Hello

  Try to download and run the utility of diagnosis of printing located here. Let us know the results.

  Good luck!

• HP Deskjet 3050: Hp Deskjet 3050 how scan from computer to the printer?

  Since I can't print

  I was wondering how I could scan as to place the paper and scan from the computer?

  Isn't this possible?

  Thanks for the reply

  Sabrina33 wrote:
  ... I was wondering how I could scan as to place the paper and scan from the computer? ...

  Hello

  No, you cannot scan from computer to the printer. You have to put original on the glass and you can use the HP scanner on computer software to scan and save a document/photo scanned on computer.

  My question: do you have installed the software and driver on your computer yet? You should do this first.

  Kind regards.

• printer Lexmark Pro 200. Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

  Printer Lexmark Pro 200.  Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

  Hello

  • What were the changes made before the problem occurred?

  You try to run this fix and check.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  If above does not work, try contacting Lexmark support for assistance.

  http://www1.Lexmark.com/en_US/global-services/customer-support-services/index.shtml

• Computer recognizes the printer, but does not install

  Original title: printer / driver problem

  My HP Officejet 5610 all in one printer just stopped working after 3 years.  I tried to reinstall the software disk... the error log will accomplish even his race.  I think I have a driver problem, but don't know how to fix it.  The computer recognizes the printer, but cannot complete the installation.

  Hello

  You did it of any material changes or software on the computer before this problem?

  You can follow this link completely and check if the problem persists.

  Printer in Windows problems

  Hope the helps of information.

  Please post back and we do know.

• HP officejet6700 no connection of any computer to the printer

  I bought the printer at the beginning of Feb. 2014 everything was working fine until yesterday, all of a sudden I get the message that I can't print or scan, and it's the same for all the computers in our House. All computers and the printer are connected through our wireless router.  I run the doctor print and scan, but it did not help. And I can not connect to hpconnected more it gives me just a mistake.

  Hi lydemar,

  From what you described, this looks like a problem with the wireless connection. I have found a document that you can use to troubleshoot with these symptoms. "Printer is off-line" Message appears on the computer and the printer does not print.

  Although you may not see a message 'offline' this document will guide you through the steps required to solve the problem.

  I hope this helps.

• dleecom.exe has been removed and know my computer and the printer can not communcate between them, what I can do

  in my firewall settign my computer and the printer can not communcate between them hit the wrong button because it was working fine

  Flight23,

  Run first remove print jobs to remove all blocked the queue print jobs.

  Unplug your printer,

  Start, Panel, programs and features, your printer, uninstall.

  Restart your computer.

  Make sure that the printer has been deleted. Driver Manual printer removal

  With online computer, insert the floppy disk to the printer and reinstall the printer. You will get a message, the printer is not connected. Connect the printer at the moment (power on)

  Don't forget the programs anti-virus and firewall will block communications.

  Rick

• Scanning from printer to the computer and the computer to the printer-Envy 5300

  I had printer 5530 myEnvy less than a week. He is doing well, but I tried to scan a document to the printer and it does not find the computer. I go into the preferences of the computer and see scan and my document, but the scan button does not illuminate. I pressed the big picture and he did practically scan my document. I want to scan at the printer to the computer and vice versa? I think I'll call.

  Thank you. I does not solve the problem when I called technical support. When I set up the printer, I used the wrong driver. Everying else worked, but not the sweeping featur. All is find now!

• Printer error "make sure that the printer software is installed and activated this scan from the computer via the printer software.

  Original title: print printer print

  I try to analyse some documents in pdf format, which I can send an email. It works fine last night but this morning I receive a message that says make sure that the printer software is installed and that this scan on the computer is enabled via the printer software. BN

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• No communication between the computer and the printer Photosmart D100 HD series

  Pentiun4 computer and HP Photosmart D110 seriesmy problem computer is HP but not accept the printer sends the signal to the printer. Thank you

  Hello

  1. what operating system is running on your computer?

  2. it worked earlier? If so, remember you have changed your computer?

  3. What is the exact error you receive?

  Follow the steps in this link and check if that helps: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• I lose my Internet on my XP computer when the printer is connected to wireless.

  My new hp6510 wireless printer works fine but my internet connection is lost when the printer is connected to wireless. I use the printer with a linksys E3000 router. The network has a XP computer, a computer with win7 64-bit. I don't have a problem with the computer to win 7, but the xp computer will drop the internet connection and sometimes I can make it work by repair of the connection to the router, but sometimes I need to restart the computer. If I stop the wireless connection and use the USB it works OK. I tried to get help from HP and Linksysm but no help. I would like suggestions.

  Hello

  Please, try the next workaroud and let me know any changes:

  1. In the computer, click the HP Photosmart 6510 .
  2. In the printer Preferences, click the estimated ink levels.
  3. Click on the tab Advanced settings .
  4. Under view alerts, select the 2nd option - Show alerts ink when I print to me.
  5. Click on close, restart the PC and follow for any change.

  Please let me know any progress,

  Shlomi

• HP 5740 all-in-one: computer recognizes the printer, but not to scan

  My computer HP Envy Phoenix 810-470pc will print and fax, but not to analyze my HP 5740, I can scan from the printer and send it to the computer, but cannot scan to the computer, I reinstalled the software and it hooked up via usb, but it still does not work. Windows 10.

  Welcome to the HP community @retiredrudy,

  I read about the problems you are having with the scanning from or to your Officejet on Windows 10 5740. See the link below and try all the steps in order and you should be able to scan in progress!

  Let me know if you encounter any questions!

  HP printers - "no Options of Scan" or "scan settings do not value" message (Windows 10)

  Best wishes to you!

  Display thanks to my answer for you help today by pressing the "thumbs up" icon below!

• How can I enable 'analysis of the computer' via the printer software?

  I just purchased a HP Deskjet Ink Advantage 3525, everything works, but when I want to scan something it tells me to activate "computer scan" through the software of the printer. I was wondering how you do it...

  I have a mac os x lion (10.7.5)

  I would be very happy if someone could respond as soon as possible because I need the scanner to make a portfolio of University.

  Hey yunkiflower,

  Please take a look through the information in the document below.

  How to perform a scan: OS X v10.7

  It will give you the information to learn how to perform scans with your printer and the combination of the OS.  I hope this helps.

• HP Laserjet Pro M451dn: Problem on a computer with the printer fonts

  Hello

  We have three computers that seem to be running the same configuration.  The problem occurs with Microsoft Publisher as follows:

  -On both computers, when specific documents are called, they work fine and fine print

  -A computer, when particular documents are called, we get the error: "load fonts - information on the police below shows what fonts are embedded in your publication or are unavailable - Goudy/unknown/not available & Goudy ExraBold/unknown/not available."

  I checked all computers and confirmed that the same TTF are installed, even to copy fonts goudy from one computer to another to ensure that they are the same.

  When I go into one of the computers that work and look at the "commercial fonts" section in Microsoft Publisher, it tells me that:

  Police = Goudy

  font type = printer

  Police source = system

  Police = Goudy ExtraBold

  font type = printer

  police source = system

  I tried to install the latest drivers for the M451dn of Laserjet Pro, but the fonts are not yet available. I have no idea on how printer vs TTF fonts. If it were an FTT, I would simply copy, but I don't know how to fix this computer to access the printer fonts.  Any help will be greatly appreciated.

  Thank you

  Jeff

  > fonts, I'm looking are listed as "Additional PS emulation fonts" for a different model printer.  When a non-PS driver is used, the driver can always access these fonts...

  I don't know for certain, but I guess these "Fonts additional PS emulation" can probably be used only if you are using a PostScript printer driver.

  If you use a printer PCL5 or PCL6 (PCL XL) driver, then these policies probably are not accessible.

  EDIT: I found an online source for one of these PS_12542.ttf (= Goudy) fonts, and it doesn't seem to be a valid TrueType font that (in theory) can probably be used by other pilots.

  But this policy has a "limited" license, which means that it cannot be incorporated in the documents:

  

  It is possible (probable?-I don't know) that support routines and standard printer drivers that you cannot use this policy as a "source" for temporary downloaded fonts "smoothly."

• Cannot print from the computer to the printer

  ON MY COPIER LEXMARK, I CLICK ON 'COPY '... A COPY IS MADE... THE SCREEN THEN GOES TO THE PRINT PAGE... I THEN CLICK ON

  THE COPY BUTTON NOW.  The ICON OF the PRINTER COMES AND STATES THERE AREN'T A REQUESTED POINT... AND IT WILL NOT BE PRINTED.

  I REPORTED THIS TO LEXMARK 3 TIMES AND I HAVE BEEN INFORMED THAT MICROSOFT... ON ONE OF THEIR DOWNLOADS

  THE UPDATES... DID SOMETHING THAT PREVENTS FROM HAPPENING.  They told me THAT YOUR OFFICE was WORKING ON

  FIND THE PROBLEM AND INFORM ME... WELL... THIS IS 6 WEEKS AND I HAAVE HEARD NOTHING...

  PLEASE ADVISE...

  Hello

  1. What is the full error message that you receive?

  2. don't you make changes to the computer?

  3. This does happen with all prints?

  4. do the question when using the functions of the printer?

  5. What is the number of the printer model?

  Update of the printer with the last drivers\software\firmware:

  Try to get the latest driver, software or no matter what firmware for the device by the manufacturer on the site mentioned below:

  http://support.lexmark.com/index?page=productSelection&channel=supportAndDownloads&locale=EN&userlocale=EN_US.

  I also suggest you to see the site mentioned below:

  http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-printer-problems.

• Scan from the computer, not the Printer Wizard

  I reinstalled the drivers for full features. I can't use the printer to scan to my office, I am only able to use the Printer Wizard. I was able to scan like this before and for some reason any during the last six months, I can't do it from the printer. It's annoying not to have two options.

  Hi @AnneO57,

  Thanks for the reply. I understand that it will be a lot of time. I don't think that the printer is the cause. To test the feature, you are able to make a copy? If so, the problem is corruption in the computer as a suspect. If all else fails, you should be able to go back using the HP9800 driver for printing.

  Use this message as a guideline:

  • To assign another driver to print in Windows 8 (Windows 8 and 10 are similar)

  Posted by my colleague @Shane_R.

  Please post back with the results. Good luck!