SonicWALL VPN Client does not connect

Similar Questions

• vSphere Client does not connect

  Since today the vSphere client does not connect to one of our 3 esxi servers

  all have the same error:

  No connection available

  VSphere Client konnte keine connection "10.2.180.5" zu der recovering.

  Ein unbekannter Verbindungsfehler aufgetreten ist. (Fehlgeschlagen Anforderung ist, zu der Die da Remoteserver Hat lange nicht atmosphere.) (As procedure passed timeout))

  Translation:

  no connection

  The vSphere client unable to connect to...

  A unknown connection error has occurred... timeout because the remote server has not responded

  Ping as 10.2.180.5 ausgeführt wird mit 32 bytes of data:

  Antwort von 10.2.180.5: bytes = 32 time < 1 ms TTL = 64

  Antwort von 10.2.180.5: bytes = 32 time < 1 ms TTL = 64

  Antwort von 10.2.180.5: bytes = 32 time < 1 ms TTL = 64

  Antwort von 10.2.180.5: bytes = 32 time < 1 ms TTL = 64

  as you can see the ip address is local and the customer to the web UI works no problem but I like to use the vShpere client

  I have no idea why its not connecting

  same problem for 2 esxi in internet... from my PC at home I can connect without problems

  all ideas are welcome im really out of ideas

  some info:

  Win7 64 bit

  ESET AntiVirus 6 Endoint

  no firewall (windows firewall disabled)

  Fixed: changed to Google DNS (8.8.8.8) in-house DC DNS and everything works... really strange because I use IP to connect

• How can I correct a problem accessing my firewall settings because the Group Policy client does not connect to windows?

  I have tried everything recently adjust the settings of the firewall from my window and a box appears saying that after an unidentified error, I can't access my firewall. After some research, I discovered that it was because my client group policy server does not connect and a small box appears saying that whenever I connect to my laptop. It is not effect my use of the internet at all, so I've never bothered to see what that meant until now I need to access my firewall. I tried to adjust the settings in group policy, but everything is gray and I can't change anything. I use an admin account so I don't know why I can't set the parameters. I'm completely stuck and I don't know that much about computers. Is there anything else I can try? I also tried a system restore, but it lasts for a long time and I can return only 5 days. Thank you

  Hi Sheldon,

  Are you connected or connected to a work network or domain? If so, this could be a policy governed by your network administrator, and you will not be able to change it.
  You might try to tell scientists on TechNet on your question to see if they have a better answer for you:
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads

• 'Connected' but 5.0.07.0440 VPN client does not work

  Hello

  IMPORTANT THING I FORGOT: the customer seems to be connected. It shows a lock locked and says connected but ping shows that nothing is not working too.

  I recently tried, in vain, to connect my win7 64 bit laptop to my place of work with the Client VPN 5.0.07.0440. All technitians and support staff could not understand the problem that prevented successful login. Later, I could connect my laptop using the VPN Client 5.0.07.0410 - same home network via an old k9, winXP.

  What could be the problem with Win7 system? Work on my old laptop is a temporary solution, but not a good thing. I would be grateful for all the help I can get.

  I tried:

  -For each access to the Cisco VPN client on my ZoneAlarm firewall.

  -Turning off the firewall completely.

  -Connect to a different network (in an Internet Café).

  Personal support at work said this isn't the network (they checked my too just in case wifi router settings) from my old computer obviously connects without any problem on the first try.

  ANY ideas would be very appreciated!

  Here is the info yet:

  -Cisco VPN Client 5.0.07.0440

  -64-bit Windows 7 Home Premium SP 1.

  My security software (which may cause the problem as far as I know, even if I close ZoneAlarm):

  -Free firewall zone alarm

  -Microsoft Security Essentials.

  (maybe windows firewall too, if it automatically restarts when I turned off zone alarm)

  IMPORTANT THING I FORGOT: the customer seems to be connected. It shows a lock locked and says connected but ping shows that nothing is not working too.

  Hello

  VPN client traffic is not transmitted from your computer to the VPN at all tunnel.

  It's if you have even tried the connection to the remote server before you took this screenshot?

  ID say it is a problem with your computer. Some software cause problems for the VPN Client or Client VPN software has problems with the network card real or something similar.

  One thing I might suggest is uninstall the firewall software and the VPN Client. After that, it is enough to install the VPN Client and try to login and check the statistics of same as in the pictures above.

  -Jouni

  EDIT: Whoa 300 posts already

  Edit2: If you have a full VPN tunnel, your computer must usually generate connections to the VPN tunnel even if you do not manually connect what either. What makes it even more strange that there are absolutely no traffic in the tunnel. Full VPN tunnel means that all traffic from your computer is transferred to the VPN tunnel when his assets.

• SonicWall VPN PIX - does not, could someone help?

  Hi all

  I'm trying to set up an a 506th PIX VPN tunnel (firmware 6.3 (2)), a firewall SonicWall Pro. It does not at the moment. Phase 1 is ok but the phase 2 is not, the VPN tunnel has not been established, and the security association is removed after a minute or two. I enclose below the PIX config and an attempt to create VPN tunnel debugging output (slightly modified and cut for reasons of confidentiality). The PIX already has other two VPN configured which work perfectly.

  I would be very grateful to anyone who could help me answer the following questions about this VPN configuration:

  1. to debug output, which means the next?

  ISAKMP (0): retransmission of the phase 2 (0/0)... mess_id 0xafc08a94

  crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500

  ISAKMP: error msg not encrypted

  2. in the config, I don't know if the 3 static controls are necessary and how it might interact... What do you think?

  3. in what order things happen in the PIX when traffic is from the local network to remote network by VPN? What is NAT then treatment then setting up VPN to access list? or or treatment, then NAT and VPN to access list? or another possibility?

  4. How can I get it work?

  Thank you very much in advance for any help provided,

  A.G.

  ########### NAMING #################################

  vpnpix1 - is the local cisco PIX

  remotevpnpeer - is the Sonicwall firewall remote

  Intranet - is the local network behind PIX

  remotevpnLAN - is the remote network behind the SonicWall

  ################ CONFIG #############################

  6.3 (2) version PIX

  interface ethernet0 10full

  interface ethernet1 10full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  .../...

  hostname vpnpix1

  .../...

  names of

  name A.B.C.D vpnpix1-e1

  name X.Y.Z.T vpnpix1-e0

  name E.F.G.H defaultgw

  intranet name 10.0.0.0

  name 192.168.250.0 nat-intranet

  name J.K.L.M internetgw

  name 10.M.N.P server1

  name Server2 10.M.N.Q

  name 10.M.N.R server3

  name 192.168.252.0 remotevpnLAN

  name 10.1.71.0 nat-remotevpnLAN

  .../...

  object-group network server-group

  description servers used by conencted to users remote LAN through a VPN tunnel

  network-host server1 object

  host Server2 network-object

  network-host server3 object

  .../...

  access allowed INCOMING tcp nat-remotevpnLAN 255.255.255.0 list object-group server-eq - ica citrix

  .../...

  OUTBOUND ip intranet 255.0.0.0 allowed access list nat-remotevpnLAN 255.255.255.0

  access list permits INTRANET-to-remotevpnLAN-VPN ip intranet 255.0.0.0 255.255.255.0 remotevpnLAN

  access-list SHEEP, remotevpnLAN permits intranet ip 255.0.0.0 255.255.255.0 nat-remotevpnLAN

  .../...

  IP address outside the vpnpix1-e0 255.255.255.240

  IP address inside the vpnpix1-e1 255.255.252.0

  .../...

  Global 192.168.250.1 1 (outside)

  NAT (inside) 0 access-list SHEEP-to-remotevpnLAN

  NAT (inside) 1 intranet 255.0.0.0 0 0

  .../...

  static (inside, outside) server1 server1 netmask 255.255.255.255 0 0

  public static server2 (indoor, outdoor) server2 netmask 255.255.255.255 0 0

  public static server3 (indoor, outdoor) server3 netmask 255.255.255.255 0 0

  static (exterior, Interior) nat-remotevpnLAN remotevpnLAN netmask 255.255.255.0 0 0

  .../...

  Access-group ENTERING into the interface outside

  Access-group OUTGOING in the interface inside

  Route outside 0.0.0.0 0.0.0.0 internetgw 1

  Route inside the intranet 255.0.0.0 defaultgw 1

  .../...

  Permitted connection ipsec sysopt

  .../...

  Crypto ipsec transform-set esp-3des esp-md5-hmac VPN - TS1

  .../...

  map BusinessPartners 30 ipsec-isakmp crypto

  card crypto BusinessPartners 30 matches the INTRANET-to-remotevpnLAN-VPN address

  card crypto BusinessPartners 30 set peer remotevpnpeer

  card crypto BusinessPartners 30 game of transformation-VPN-TS1

  BusinessPartners outside crypto map interface

  ISAKMP allows outside

  .../...

  ISAKMP key * address remotevpnpeer netmask 255.255.255.255

  ISAKMP identity address

  part of pre authentication ISAKMP policy 10

  ISAKMP policy 10 3des encryption

  ISAKMP policy 10 md5 hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 28800

  part of pre authentication ISAKMP policy 20

  ISAKMP policy 20 3des encryption

  ISAKMP policy 20 chopping sha

  20 2 ISAKMP policy group

  ISAKMP duration strategy of life 20 28800

  part of pre authentication ISAKMP policy 30

  ISAKMP policy 30 3des encryption

  ISAKMP policy 30 md5 hash

  30 1 ISAKMP policy group

  ISAKMP duration strategy of life 30 28800

  .../...

  : end

  ################## DEBUG ############################

  vpnpix1 # debug crypto isakmp

  vpnpix1 #.

  ISAKMP (0): early changes of Main Mode

  crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500

  Exchange OAK_MM

  ISAKMP (0): treatment ITS payload. Message ID = 0

  ISAKMP (0): audit ISAKMP transform 1 against the policy of priority 10

  ISAKMP: 3DES-CBC encryption

  ISAKMP: MD5 hash

  ISAKMP: default group 2

  ISAKMP: preshared auth

  ISAKMP: type of life in seconds

  ISAKMP: duration of life (basic) of 28800

  ISAKMP (0): atts are acceptable. Next payload is 0

  ISAKMP (0): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication

  to return to the State is IKMP_NO_ERROR

  crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500

  Exchange OAK_MM

  ISAKMP (0): processing KE payload. Message ID = 0

  ISAKMP (0): processing NONCE payload. Message ID = 0

  ISAKMP (0): load useful treatment vendor id

  ISAKMP (0): ID payload

  next payload: 8

  type: 1

  Protocol: 17

  Port: 500

  Length: 8

  ISAKMP (0): the total payload length: 12

  to return to the State is IKMP_NO_ERROR

  crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500

  Exchange OAK_MM

  ISAKMP (0): processing ID payload. Message ID = 0

  ISAKMP (0): HASH payload processing. Message ID = 0

  ISAKMP (0): SA has been authenticated.

  ISAKMP (0): start Quick Mode Exchange, M - ID - 1346336108:afc08a94

  to return to the State is IKMP_NO_ERROR

  ISAKMP (0): send to notify INITIAL_CONTACT

  ISAKMP (0): sending message 24578 NOTIFY 1 protocol

  Peer VPN: ISAKMP: approved new addition: ip:remotevpnpeer / 500 Total VPN peer: 3

  Peer VPN: ISAKMP: Peer ip:remotevpnpeer / 500 Ref cnt incremented: 1 Total VPN peer: 3

  crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500

  ISAKMP (0): processing NOTIFY payload Protocol 14 1

  SPI 0, message ID = 476084314

  to return to the State is IKMP_NO_ERR_NO_TRANS

  ISAKMP (0): retransmission of the phase 2 (0/0)... mess_id 0xafc08a94

  crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500

  ISAKMP: error msg not encrypted

  ISAKMP (0): start Quick Mode Exchange, M - ID 1919346690:7266e802

  crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500

  ISAKMP: error msg not encrypted

  ISAKMP (0): retransmission of the phase 2 (1: 1)... mess_id 0xafc08a94

  crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500

  ISAKMP: error msg not encrypted

  ISAKMP (0): retransmission of the phase 2 (0/2)... mess_id 0x7266e802

  crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500

  ISAKMP: error msg not encrypted

  ISAKMP (0): retransmission of the phase 2 (2/3)... mess_id 0xafc08a94

  crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500

  ISAKMP: error msg not encrypted

  ISAKMP (0): retransmission of the phase 2 (1/4)... mess_id 0x7266e802

  crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500

  ISAKMP: error msg not encrypted

  ISAKMP (0): start Quick Mode Exchange, M - ID - 1475513565:a80d7323

  ISAKMP (0): delete SA: CBC vpnpix1-e0, dst remotevpnpeer

  crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500

  ISAKMP: drop msg deleted his

  ISADB: Reaper checking HIS 0x10ff1ac, id_conn = 0 DELETE IT!

  Peer VPN: ISAKMP: Peer ip:remotevpnpeer / 500 Ref cnt decremented for: 0 Total of VPN peer: 3

  Peer VPN: ISAKMP: deleted peer: ip:remotevpnpeer / 500 Total VPN peers: 2

  ISADB: Reaper checking HIS 0 x 1100984, id_conn = 0

  ISADB: Reaper checking HIS 0x10fcddc, id_conn = 0

  crypto_isakmp_process_block:src:remotevpnpeer, dest:vpnpix1 - dpt:500 e0 spt:500

  ISAKMP: its not located for ike msg

  #####################################################

  Get rid of:

  static (exterior, Interior) nat-remotevpnLAN remotevpnLAN netmask 255.255.255.0 0 0

  You don't need it. Change:

  OUTBOUND ip intranet 255.0.0.0 allowed access list nat-remotevpnLAN 255.255.255.0

  access-list SHEEP, remotevpnLAN permits intranet ip 255.0.0.0 255.255.255.0 nat-remotevpnLAN

  TO:

  access list permits OUTGOING ip intranet 255.0.0.0 255.255.255.0 remotevpnLAN

  access-list SHEEP, remotevpnLAN permits intranet ip 255.0.0.0 255.255.255.0 remotevpnLAN

  This indicates the PIX not NAT IPSec traffic. NAT happens BEFORE IPSec in the PIX, so if you the traffic IPSec nat it will never match your crypto access list and will not be encrypted.

  This, however, should not stop the tunnel of Phase 2 of the course of construction, they would stop flowing above the tunnel, traffic, so you still have a problem somewhere. What I'm guessing, is that the Sonicwall (SW) has a different encryption-defined list access, it must be the EXACT OPPOSITE of what is configured on the PIX. In other words, the SW should be encrypting the traffic of "remotevpnLAN-24" "intranet/8", make sure that the subnet mask ar ETHE same too. "

  To answer your questions:

  1. it simply means that the PIX has not received a response and is to retransmit the last ISAKMP packet. The process_block simply means that the PIX has dropped a package that was to be encrypted because the IPSec tunnel has not been built. If you get the tunnel built, these messages will disappear.

  2. the 3 first static does not appear to be linked to the tunnel IPSec, if they are simply to access a server inside, then they will not affect this VPN tunnel. The last of them should be deleted, as I already said.

  3. for traffic initiated from inside the PIX, the order is incoming ACL, then NAT, IPSec processing. That's why your OUTGOING ACL must allow traffic first, then your NAT 0 statement refuses to be NAT had, then the encryption function is the traffic and the number.

  4 do what I said above :-)

  If you still have no luck, re - run debugs, but initiate traffic behind the Sonicwall, in this way the Sonicwall will try and debug of build that the tunnel and you will get more information on the PIX. Mainly, we'll see what traffic model the SonicWall is configured to encrypt (you don't see if the PIX initiates the tunnel).

• Windows - Internet access, no split Tunnel L2TP VPN Clients does not

  Greetings!

  I have four ASA 5505 that I configured with 4 site to site VPN tunnels (works perfectly) to connect to our company facilities 4. The ASA is also configured with remote access L2TP/IPsec so that a specific group of users of portable computers can connect to and access to all facilities. It also works very well except for one important exception - my split tunnel setting doesn't seem to work, because I can't connect to the Internet outside the VPN resources.

  I accept the inherent risk of allowing tunnels to split from a security point of view since I take the necessary steps to secure the systems used for remote access. I would appreciate any feedback on how to get the job of split tunnel.

  Here is the configuration:

  : Saved
  :
  ASA Version 1.0000 11
  !
  SGC hostname
  domain somewhere.com
  names of
  COMMENTS COMMENTS LAN 192.168.2.0 name description
  name 75.185.129.13 description of SGC - external INTERNAL ASA
  name 172.22.0.0 description of SITE1-LAN Ohio management network
  description of SITE2-LAN name 172.23.0.0 Lake Club Network
  name 172.24.0.0 description of training3-LAN network Southwood
  description of training3 - ASA 123.234.8.124 ASA Southwoods name
  INTERNAL name 192.168.10.0 network Local INTERNAL description
  description of name 192.168.11.0 INTERNAL - VPN VPN INTERNAL Clients
  description of Apollo name 192.168.10.4 INTERNAL domain controller
  description of DHD name 192.168.10.2 Access Point #1
  description of GDO name 192.168.10.3 Access Point #2
  description of Odyssey name 192.168.10.5 INTERNAL Test Server
  CMS internal description INTERNAL ASA name 192.168.10.1
  name 123.234.8.60 description of SITE1 - ASA ASA management Ohio
  description of SITE2 - ASA 123.234.8.189 Lake Club ASA name
  description of training3-VOICE name Southwood Voice Network 10.1.0.0
  name 172.25.0.0 description of training3-WIFI wireless Southwood
  !
  interface Vlan1
  nameif outside
  security-level 0
  IP address dhcp setroute
  !
  interface Vlan2
  nameif INSIDE
  security-level 100
  255.255.255.0 SGC-internal IP address
  !
  interface Vlan3
  nameif COMMENTS
  security-level 50
  IP 192.168.2.1 255.255.255.0
  !
  interface Ethernet0/0
  Time Warner Cable description
  !
  interface Ethernet0/1
  switchport access vlan 2
  switchport trunk allowed vlan 2-3
  switchport vlan trunk native 2
  switchport mode trunk
  !
  interface Ethernet0/2
  switchport access vlan 2
  switchport trunk allowed vlan 2-3
  switchport vlan trunk native 2
  switchport mode trunk
  !
  interface Ethernet0/3
  switchport access vlan 2
  switchport trunk allowed vlan 2-3
  switchport vlan trunk native 2
  switchport mode trunk
  !
  interface Ethernet0/4
  switchport access vlan 2
  switchport trunk allowed vlan 2-3
  switchport vlan trunk native 2
  switchport mode trunk
  !
  interface Ethernet0/5
  switchport access vlan 2
  switchport trunk allowed vlan 2-3
  switchport vlan trunk native 2
  switchport mode trunk
  !
  interface Ethernet0/6
  Description for Wireless AP Trunk Port
  switchport access vlan 2
  switchport trunk allowed vlan 2-3
  switchport vlan trunk native 2
  switchport mode trunk
  !
  interface Ethernet0/7
  Description for Wireless AP Trunk Port
  switchport access vlan 2
  switchport trunk allowed vlan 2-3
  switchport vlan trunk native 2
  switchport mode trunk
  !
  boot system Disk0: / asa821-11 - k8.bin
  Disk0: / config.txt boot configuration
  passive FTP mode
  clock timezone IS - 5
  clock to summer time EDT recurring
  DNS domain-lookup outside
  INTERNAL DNS domain-lookup
  DNS domain-lookup GUEST
  DNS server-group DefaultDNS
  Name-Server 4.2.2.2
  domain somewhere.com
  permit same-security-traffic inter-interface
  permit same-security-traffic intra-interface
  DM_INLINE_TCP_1 tcp service object-group
  EQ port 3389 object
  port-object eq www
  EQ object of the https port
  EQ smtp port object
  the DM_INLINE_NETWORK_1 object-group network
  network-object SITE1-LAN 255.255.0.0
  network-object SITE2-LAN 255.255.0.0
  network-object training3-LAN 255.255.0.0
  object-group training3-GLOBAL network
  Southwood description Global Network
  network-object training3-LAN 255.255.0.0
  network-object training3-VOICE 255.255.0.0
  network-object training3-WIFI 255.255.0.0
  DM_INLINE_TCP_2 tcp service object-group
  EQ port 5900 object
  EQ object Port 5901
  object-group network INTERNAL GLOBAL
  Description Global INTERNAL Network
  network-object INTERNAL 255.255.255.0
  network-object INTERNALLY-VPN 255.255.255.0
  access-list outside_access note Pings allow
  outside_access list extended access permit icmp any CMS-external host
  access-list outside_access note that VNC for Camille
  outside_access list extended access permit tcp any host CMS-external object-group DM_INLINE_TCP_2
  access-list outside_access note INTERNAL Services
  outside_access list extended access permit tcp any host CMS-external object-group DM_INLINE_TCP_1
  DefaultRAGroup_splitTunnelAcl list standard access allowed INTERNAL 255.255.255.0
  access-list sheep extended ip INTERNAL 255.255.255.0 allow INTERNAL VPN 255.255.255.0
  access-list extended sheep allowed ip IN-HOUSE-GLOBAL SITE1-LAN 255.255.0.0 object-group
  access-list extended sheep allowed ip IN-HOUSE-GLOBAL SITE2-LAN 255.255.0.0 object-group
  access-list extended sheep allowed ip object-IN-HOUSE-GLOBAL object group training3-GLOBAL
  access-list INTERNAL-to-SITE1 extended permit ip IN-HOUSE-GLOBAL SITE1-LAN 255.255.0.0 object-group
  access-list INTERNAL-to-training3 extended permitted ip object-IN-HOUSE-GLOBAL object group training3-GLOBAL
  access-list INTERNAL-to-SITE2 extended permit ip IN-HOUSE-GLOBAL SITE2-LAN 255.255.0.0 object-group
  no pager
  Enable logging
  exploitation forest asdm warnings
  Debugging trace record
  Outside 1500 MTU
  MTU 1500 INTERNAL
  MTU 1500 COMMENTS
  192.168.11.1 mask - local 192.168.11.25 pool IN-HOUSE VPN IP 255.255.255.0
  no failover
  ICMP unreachable rate-limit 1 burst-size 1
  ASDM image disk0: / asdm - 623.bin
  enable ASDM history
  ARP timeout 14400
  Global 1 interface (outside)
  (INTERNAL) NAT 0 access-list sheep
  NAT (INTERNAL) 1 0.0.0.0 0.0.0.0
  NAT (GUEST) 1 0.0.0.0 0.0.0.0
  5900 5900 Camille netmask 255.255.255.255 interface static tcp (GUEST, outdoor)
  3389 3389 Apollo netmask 255.255.255.255 interface static tcp (INDOOR, outdoor)
  public static tcp (INDOOR, outdoor) interface www Apollo www netmask 255.255.255.255
  public static tcp (INDOOR, outdoor) interface https Apollo https netmask 255.255.255.255
  public static tcp (INDOOR, outdoor) interface smtp smtp Apollo netmask 255.255.255.255
  5901 puppy 5901 netmask 255.255.255.255 interface static tcp (GUEST, outdoor)
  Access-group outside_access in interface outside
  Timeout xlate 0:05:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  RADIUS protocol AAA-server Apollo
  Apollo (INTERNAL) AAA-server Apollo
  Timeout 5
  key *.
  AAA authentication enable LOCAL console
  the ssh LOCAL console AAA authentication
  AAA authentication LOCAL telnet console
  AAA authentication http LOCAL console
  Enable http server
  http 0.0.0.0 0.0.0.0 INTERNAL
  http 0.0.0.0 0.0.0.0 COMMENTS
  No snmp server location
  No snmp Server contact
  Community SNMP-server
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
  Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  SYSTEM_DEFAULT_CRYPTO_MAP game 65535 dynamic-map crypto transform-set ESP-3DES-SHA TRANS_ESP_3DES_SHA
  correspondence address 1 card crypto outside_map INTERNAL SITE1
  card crypto outside_map 1 set of peer SITE1 - ASA
  card crypto outside_map 1 set of transformation-ESP-3DES-SHA
  address for correspondence card crypto outside_map 2 INTERNAL training3
  outside_map 2 peer training3 - ASA crypto card game
  card crypto outside_map 2 game of transformation-ESP-3DES-SHA
  address for correspondence outside_map 3 card crypto INTERNAL SITE2
  game card crypto outside_map 3 peers SITE2 - ASA
  card crypto outside_map 3 game of transformation-ESP-3DES-SHA
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  delimiter group @.
  Telnet training3 - ASA 255.255.255.255 outside
  Telnet SITE2 - ASA 255.255.255.255 outside
  Telnet SITE1 - ASA 255.255.255.255 outside
  Telnet 0.0.0.0 0.0.0.0 INTERNAL
  Telnet 0.0.0.0 0.0.0.0 COMMENTS
  Telnet timeout 60
  SSH enable ibou
  SSH training3 - ASA 255.255.255.255 outside
  SSH SITE2 - ASA 255.255.255.255 outside
  SSH SITE1 - ASA 255.255.255.255 outside
  SSH 0.0.0.0 0.0.0.0 INTERNAL
  SSH 0.0.0.0 0.0.0.0 COMMENTS
  SSH timeout 60
  Console timeout 0
  access to the INTERNAL administration
  Hello to tunnel L2TP 100
  interface ID client DHCP-client to the outside
  dhcpd dns 4.2.2.1 4.2.2.2
  dhcpd ping_timeout 750
  dhcpd outside auto_config
  !
  address INTERNAL 192.168.10.100 dhcpd - 192.168.10.200
  dhcpd Apollo Odyssey interface INTERNAL dns
  dhcpd somewhere.com domain INTERNAL interface
  interface of dhcpd option 150 ip 10.1.1.40 INTERNAL
  enable dhcpd INTERNAL
  !
  dhcpd address 192.168.2.100 - 192.168.2.200 COMMENTS
  dhcpd dns 4.2.2.1 4.2.2.2 interface COMMENTS
  enable dhcpd COMMENTS
  !

  a basic threat threat detection
  statistical threat detection port
  Statistical threat detection Protocol
  Statistics-list of access threat detection
  a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
  NTP server 192.43.244.18 prefer external source
  WebVPN
  allow outside
  CSD image disk0:/securedesktop-asa-3.4.2048.pkg
  SVC disk0:/sslclient-win-1.1.4.179.pkg 1 image
  SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 2 image
  enable SVC
  Group Policy DefaultRAGroup INTERNAL
  attributes of Group Policy DefaultRAGroup
  Server DNS 192.168.10.4 value
  Protocol-tunnel-VPN l2tp ipsec
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
  value by default-domain somewhere.com
  Group Policy DefaultWEBVPNGroup INTERNAL
  attributes of Group Policy DefaultWEBVPNGroup
  VPN-tunnel-Protocol webvpn
  Group Policy DefaultL2LGroup INTERNAL
  attributes of Group Policy DefaultL2LGroup
  Protocol-tunnel-VPN IPSec l2tp ipsec
  Group Policy DefaultACVPNGroup INTERNAL
  attributes of Group Policy DefaultACVPNGroup
  VPN-tunnel-Protocol svc
  attributes of Group Policy DfltGrpPolicy
  value of 192.168.10.4 DNS Server 4.2.2.2
  VPN - 25 simultaneous connections
  VPN-idle-timeout no
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
  value by default-domain somewhere.com
  the value INTERNAL VPN address pools
  chip-removal-disconnect disable card
  WebVPN
  SVC keepalive no
  client of dpd-interval SVC no
  dpd-interval SVC bridge no
  value of customization DfltCustomization
  attributes global-tunnel-group DefaultRAGroup
  VPN INTERNAL address pool
  Group Policy - by default-DefaultRAGroup
  IPSec-attributes tunnel-group DefaultRAGroup
  pre-shared-key *.
  Disable ISAKMP keepalive
  tunnel-group DefaultRAGroup ppp-attributes
  No chap authentication
  no authentication ms-chap-v1
  ms-chap-v2 authentication
  attributes global-tunnel-group DefaultWEBVPNGroup
  VPN INTERNAL address pool
  Group Policy - by default-DefaultWEBVPNGroup
  tunnel-group 123.234.8.60 type ipsec-l2l
  IPSec-attributes tunnel-group 123.234.8.60
  pre-shared-key *.
  tunnel-group 123.234.8.124 type ipsec-l2l
  IPSec-attributes tunnel-group 123.234.8.124
  pre-shared-key *.
  tunnel-group 123.234.8.189 type ipsec-l2l
  IPSec-attributes tunnel-group 123.234.8.189
  pre-shared-key *.
  type tunnel-group DefaultACVPNGroup remote access
  attributes global-tunnel-group DefaultACVPNGroup
  VPN INTERNAL address pool
  Group Policy - by default-DefaultACVPNGroup
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the netbios
  inspect the rsh
  inspect the rtsp
  inspect the skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect the tftp
  inspect the sip
  inspect xdmcp
  inspect the http
  inspect the they
  !
  global service-policy global_policy
  context of prompt hostname
  Cryptochecksum:423c807c0d63cb3e9aeceda977053f84
  : end
  ASDM image disk0: / asdm - 623.bin
  ASDM location Camille 255.255.255.255 INTERNAL
  ASDM location INTERNAL CGT-external 255.255.255.255
  ASDM location INTERNAL SITE1-LAN 255.255.0.0
  ASDM location INTERNAL SITE2-LAN 255.255.0.0
  ASDM location INTERNAL training3-LAN 255.255.0.0
  ASDM location INTERNAL training3 - ASA 255.255.255.255
  ASDM location INTERNAL GDO 255.255.255.255
  ASDM location INTERNAL SITE1 - ASA 255.255.255.255
  ASDM location INTERNAL SITE2 - ASA 255.255.255.255
  ASDM location INTERNAL training3-VOICE 255.255.0.0
  ASDM location puppy 255.255.255.255 INTERNAL
  enable ASDM history

  I should also mention that my test clients are a combination of Windows XP, Windows 7, and Windows Mobile. Other that in specifying the preshared key and forcing L2TP/IPsec on the client side, the VPN settings on clients are the default settings with the help of MS-CHAP/MS-CHAPv2.

  You must configure * intercept-dhcp enable * in your group strategy:

  attributes of Group Policy DefaultRAGroup

  attributes of Group Policy DefaultRAGroup

  Server DNS 192.168.10.4 value
  Protocol-tunnel-VPN l2tp ipsec
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
  value by default-domain somewhere.com

  Intercept-dhcp enable

  -Latptop VPN clients (which I assume are on windows computers) is also the * use on remote network default gateway * box unchecked.  It is located on the Advanced tab of VPN client TCP/IP properties.   Select Client VPN > properties > Networking > TCP/IP Internet Protocol > properties > advanced and uncheck the box.

  Alex

• VPN does not connect in some places

  I have a laptop running v5 Cisco VPN Client that connects to the office of some places network fine, but not other places.  and in the places where it does not connect, it connects fine to another unrelated network.  by "does not connect", I mean that I can't access any of the resources on the office network - the client software seems to work, but there is no access, I cannot ping anything on the office network.  What would cause this?  Here is the log file from a location where it does not connect to the office network:

  Cisco Systems VPN Client 5.0.07.0290 Version
  Copyright (C) 1998-2010 Cisco Systems, Inc.. All rights reserved.
  Customer type: Windows, Windows NT
  Running: 6.1.7600
  Directory of config files: E:\Cisco systems VPN Client\

  1 21:36:30.625 07/03/11 Sev = WARNING/2 CVPND/0xE3400013
  AddRoute cannot add a route which the metric is 0: code 160
  Destination 5.0.0.0
  Subnet mask 255.0.0.0
  Gateway 192.36.253.1
  Interface 192.36.253.179

  2 21:36:30.625 07/03/11 Sev = WARNING/2 CM/0xA3100024
  Failed to add the route. Network: 5000000, subnet mask: ff000000, Interface: c024fdb3 Gateway: c024fd01.

  in this particular case, the local network uses the range of 192.168.1.x IP addresses, so that shouldn't be a problem.

  Lee

  Could you go through a PAT instrument, so you are not able to access resources after the VPN is connected because ESP packets usually will not go through a PAT tool.

  What must be configured on the VPN server is to allow NAT - t (NAT Traversal), IE: encapsulation of the ESP package in UDP or TCP packet, then it passes through PAT instrument very well.

  What server VPN should you terminate the VPN Client?

  The command to activate on the SAA would be: crypto isakmp nat-traversal 20

  Let me know if you have other devices like the VPN server.

  Hope that helps.

• vSphere client does not display does not import an option of the machine when it is connected to vCenter

  Hello

  I just got a new PC and installed all my applications, but the vSphere client does not show the import, an option of the machine when it is connected to vCenter, ideas, why not?

  Thank you

  Hello

  Hello from the Canada

  You must install the converter Plugin into your new PC

  Go to Plugins, then install the converter one.

  Concerning

• Smartphones from blackBerry Storm 2 (on Vodafone in the United Kingdom) does not connect to WiFi properly.

  I'm having a problem with my Storm 2 right now - it does not connect to the router wireless home properly.  Router is a wireless G of Belkin model.   The page "Manage the Conections" shows the connected device (green text, but - no checkmark) and the status page shows that he has an IP address assigned to it.  This is confirmed from the listing routers DHCP client.  But the WiFi icon remains Gray and I cannot get the phone to authenticate to confiure the accounts email outside the company.  Failed attempts to addresses of ping inside or outside the LAN with timeout errors.

  Can one suggest a solution to this is iiue please - even if it has replace the router!

  If it helps it is the result of the WiF self-diagnosis:

  A WiFi Diagnostics (Advanced): December 24, 2009 20:04:43

  A Wi - Fi connection
  Current profile: belkin54g
  SSID: belkin54g
  AP MAC address: 00:11:50:FF:15:20
  Security type: pre-shared Key (PSK)
  Association: success
  Authentication: success
  Local IP address: 192.168.2.11
  Signal level:-44 dBm
  Data connection speed: 54 Mbps
  Status: Acquired network
  Authentication failure reason:
  Network type: 802. 11 b / g
  Network channel: 1 pair
  Encryption: TKIP
  Group cipher: TKIP
  Gateway address: 192.168.2.1
  DHCP: success
  Primary DNS: 192.168.2.1
  Secondary DNS: 194.168.4.100
  Suffix DNS: Belkin
  Subnet mask: 255.255.255.0
  Server's domain suffix:
  Certificate: Not Applicable
  Software token: not Applicable

  Code hotspot:
  Hotspot message: not Applicable
  Hotspot status: not Applicable

  VPN
  Current profile:
  Address of the hub:
  Contact: n/a
  Authentication: n/a
  Secure the device IP:
  Status: VPN profile is not found.
  Hub address: n/a
  Hub IP:
  Primary DNS:
  Secondary DNS:
  DNS suffix:
  Set the subnet mask:
  New attempt to: life of Session:
  Re-login to:
  Failed connection attempts: 0
  Certificate: Software token does not apply:

  The question above is now sorted thanks - active Vodafone BIS on my contract and sudenly the Wi - Fi started working very well!

  Weird - but there you go, the (whims?) wonders of modern technology!

• iPad does not connect to the Wifi on the range 192.168.0. *.

  I have an iPad Mini (ME860BA) on os 9.3.1 that would not connect to my wifi at home.  He began to abandon their studies repeatedly a few months before and then just wouldn't connect at all.  It is on the os 9.3 so I upgraded to 9.3.1 but it did not help.  I was able to connect using a hotspot from my phone but no go on the real wifi. Sometimes it seems impossible to connect and others it seems to connect but without the wifi icon that appear (and internet access). All other devices connect to the House without exception (or question) - it's just my iPad.

  I followed every bit of advice I've found - turning wifi off & on, forgetting network, reset all the network settings, hard reboot, reboot normal, turning airplane mode turn off again, go up the brightness of the screen (odd) and finally I restored my router and the iPad to factory settings.  Nothing worked, so I took him to a store of Apple and waiting for the genius to see me I thought I would try to connect to the wifi and it went all right!  I felt a little silly to start with but they still took a look and said that he had 'something' bad, but they didn't know what.  Their best guess was that it was something to do with password authentication because they are client wifi has no password.  I returned home and disabled the security mode of the router - I have a Virgin Superhub running the 2.4 and 5 GHz primary wireless networks - no amount of adjusting the security modes (remove the password, make visible SSID, change of Protocol) makes all the difference.  However, knowing that it worked on wifi from Apple in the store, I was really puzzled.

  After ages bother with different parameters (especially in my router), I now know why it does not connect to home... My Virgin router to short on a range of address DHCP IP of 192.168. 0. * and my iPad suddenly won't connect unless the beach is 192.168. 1. * or higher.  (It connected OK for 2 years).  It took weeks to find this out, but at least now I can connect.  I turned on the wifi of comments because it uses the gamme.1.  Everything is good, connects the first time, every time!  I have not tried establishing a password (I was so happy, it connected I left because it was... well as I switch on the MAC filtering, for a little extra protection) I could try side password later and if it still connect, I'll update my post.

  My solution is very well when I'm at home but is not going to help if I get the iPad with me - it will be hit & miss if I can get the WiFi also.  Must be set correctly - I see no that it is hardware related, so there must be a bug in the software/firmware.

  Anyone having problems connecting to wifi can try the workaround network comments - at least it will get you.

  Is there a future fix for this?

  Re: iPad wifi suddenly does not save

  Change the range on the router you want to connect to.

• iPhone and iPad does not connect to internet

  Hello

  Since yesterday, I was unable to connect to internet via wifi on my iPad and iPhone.  They show the power of the full signal and says I'm connected, but won't load Web pages or refresh applications.  When I disable wifi on my phone everything works fine on the LTE, but I don't want to use my data.

  I think it must be something with the update iOS because:

  -J' completely rebooted our router and modem and it worked on my iPad for about 30 seconds (what makes a Web page) before it stopped working again.

  -My boyfriend did not the last update on the iPad or iPhone, and both connect on our wifi at home, while my iPad or iPhone will connect to the internet.

  -My iPhone also does not connect to the wifi in my work, even though I know it works as I am online on my computer work via wifi.

  I noticed something strange on my iPhone and iPad when I went to check the settings wifi yesterday - the VPN configuration is flashing/refreshing without touching me, even if I don't have everything set up VPN connections.  When I actually click on VPN, an error is displayed.  There may be something wrong with the VPN on the new update which blocks the wifi signal?

  
  

  I really appreciate your help!
  

  If you are able to connect your iPad and iPhone to your wireless router agreement but the iPad and iPhone will not connect to internet, it is unlikely to have anything to do with the version of iOS.

  Try this:

  Restart your router (unplug unit, wait ten seconds and then reconnect it).

  Wait for the router shows all lights normal and connected.

  Now, reboot your iPad or iPhone

• Citrix Access Gateway does not connect after update June 17

  I am running Citrix Access Gateway on a Windows 7 64-bit Client computer and as updates on 17 June, it does not connect.

  Have you checked with Citrix technical support? This would be my first step. If they cannot help, contact the technical support of MS for Windows Update.

  Support for Windows Update -http://support.microsoft.com/gp/wusupport

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  If you are not in the Canada or the United States, there are numbers to contact local support here:http://support.microsoft.com/common/international.aspx
  MS - MVP - Elephant Boy computers - don't panic!

• HP Officejet Pro 8600 Plus does not connect through the Device Manager but will connect bij Win7.

  I have a HP Officejet Pro 8600 Plus that works very well with some computers connected via ethernet.

  On a new computer with Windows 7 Ultimate edition, HP Device Manager can't find the printer, even when I give IP address.

  When I try to add a new printer network in Windows (add printer) windows detects the printer less than a second.

  I need the hp Device Manager configuration so I can use all the options off the officejet.

  Problem solved.

  The printer has a fixed IP address and the customer got his IP by DHCP. By dhcp, dns suffix has been changed so the printer dns suffix and the client does not mach.

  Now the printer receives its IP address by the dhcp server. The dhcp server always gives the same address to the printer.

• Vista does not connect to the network at startup folders

  Unlike XP, Vista is not automatically mapping/connecting to my WiFi network at startup folders.  Every time I have start or restart, Vista does not connect to them, and I have to manually complete the task.  All folders that I want to connect to are marked "Reconnect at logon."  How to get Vista to connect to these folders when connecting as it is supposed to?

  Hi Peters4,

  I have some questions I need to ask:

  Once have connected you to the computer, you still see the disks with a red X on them or they have gone completely?
  If they have the red x, connects by double-clicking on them?
  If you are prompted for a password?
  You map drives using an IP address instead of a name of sharing?
  Are you using the built in Windows Vista wireless client or other software to connect to the wireless network?

  You could try the following drive mapping and see if that fixes the problem:

  • Press Start.
  • Type CMD in the Search box and press ENTER.
  • Right click on cmd.exe and select run as administrator.

  At the command prompt, use the following command:

  net use x:-\\nom_ordinateur\nom_partage\ / persistent: Yes

  (where x is the drive letter you want to assign.)

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Samsung Galaxy S3 does not connect to the DELL laptop

  Hello

  I use the operating system Windows 7 Home Premium 64 - bit with the Intel processor i5-2450 M CPU @2.50 GHz. recently the past 4 months, I have observed that Samsung Galaxy S3 does not connect to the Dell laptop

  We could not see the content of Samsung Mobile in the PC. No Popup message is coming

  I tried the options below

  1. connected with different cable to the laptop, the original cable

  2. try with Samsung Kies

  Can you please help us in this regard that I wasn't sure if the drivers problem.

  We have seen the error in the mobile below.

  "Could not find the software on your computer that can recognize your device.service Pack 3, Windows Media Player, version 10 or greater, for Android File Transfer for MAC OS or Windows XP must be installed.

  You can download and install Kies on your http://www.samsung.com/kies computer to synchronize with your device data, back up the data and upgarde your device (Windows and Mac OS are supported). »

  I use Windows 7 and Media player version 12.0.7601.18150.hence was not, of course, why the Samsung Galaxy S3 does not connect to the DELL laptop

  Thank you

  Kalyan

  Hi Kalyan,

  From my research, this error message indicates that you have an old version of Samsung drivers installed on the computer.

  Several clients are faced with this question after that they have updated the version of Android to 4.3, but the version of the driver is not updated.

  I suggest you uninstall all traces of Samsung is installed in the list programs and then reinstall the device drivers Samsung from the link provided in the previous post.

  To uninstall a program see the link below.

  Uninstall or change a program

  Once you uninstall programs related to Samsung download and install the drivers for Samsung devices.