Connected to the point of access, but not the internet.

Similar Questions

• I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet.

  I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet. It happened suddenly and with no warning or cause. I tried to turn off the modem for 10 seconds and turning it back on, but I still had the same problem. What should I do? Help, please.

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Able to connect to the Internet, but not be able to access router settings

  I can connect to the Internet fine, ping works, but I can't connect to the router settings.

  Specifications

  • Router IP: 192.168.1.1
  • IP address: 192.168.1.150 USING static IP
  • Browser: Safari
  • Error message: Safari cannot open the page because the server dropped the connection unexpectedly.
  • If you need a card, leave a reply!

  Hey Harpo1! Try to access the configuration page using a computer connected to the router. If it does not connect to the page, reboot the router and use a different web browser could help. You can also try to temporarily unplug the modem and see if you can access it.

• Windows Media Center tells me that I have sm not connected to the internet, but I'm out of windows media center I can access the internet. Why?

  Windows Media Center tells me that I have sm not connected to the internet, but I'm out of windows media center I can access the internet. Why?

  Disable the firewall and check the connectivity in media center.

• Windows 8 says it is connected to the Internet, but none of the browsers can access a Web site.

  Windows 8 worked well without problems.  So I think some updates were automatically installed and now none of the 3 browsers work.  Network utilities show always the computer is connected to the internet, but the speed tests it does not at all.  Our other computer with Windows 8 ceased to be able to access the internet at the same time.

  I tried to restore to a previous restore point, but it is still not possible to access the internet.

  Thank you!

  After making back all Microsoft updates and spend 4 hours on the line with the support of Microsoft, we have reduced to eSet having a service that forbade access to the internet, even if we have disabled the firewall.  Stopping this service restored internet access.

  eSet has been marked as compatible on different Web sites, but check on eSet they revealed there are questions.

  Initially things worked but eSet must have updated something that caused problems.

• Airport utility: green points on the AirPort Extreme & Internet; Mini Mac does not connect to the internet.

  Airport utility shows green points on the AirPort Extreme and the Internet, but my my Mac mini does not connect to the internet. IPhones and 2 portable Windows connect very well, and see all the devices on the home network. The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem. I tried to stop and things start back up as if the installation of the internet for the first time. No joy.

  The airport connects using DHCP in Bridge Mode

  The router address is 192.168.80.1

  Address IPv4 is 192.168.80.2

  DNS server is the same as the router, but grayed out

  Mac Mini IPv4 Address is 192.168.80.3

  IPv6 automatically configures

  Also updated the firmware of the airport; no change.

  ISP guy was friendly but puzzled. He started at the top floor level Tech, so I do not know when I hear back.

  Any ideas to fix?

  Thank you.

  Post edited by: en maschera

  but my my Mac mini does not connect to the internet.

  The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem.

  Hello

  Network preferences may be damaged.

  Open the Finder. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  / Library/Preferences/SystemConfiguration

  Click OK, and then move all files in the SystemConfiguration folder to the trash.

  Restart your Mac. See if that makes a difference.

  Your Mac will generate a new SystemConfiguration folder for you.

  Then open AirPort Utility located in HD > Applications > Utilitiies

  Make sure that both Internet and Extreme are green.

  

• I'm trying to connect to the internet and I am unable to do so. My screen says Internet Explore cannot display this Web page. I missed something in the settings? He sees my wireless and says acquiring network address... but not to go further.

  I tried to diagnose, disconnect and reconnect

  You have left out information such as how you connect to the Internet (cable/DSL? ISP?), the brand of your router, and whether other computers can connect to your router wirelessly with success. Also, we don't know whether there is an initial Setup or if you had this before work and now it just doesn't.

  I'm going to assume that this is the first installation then give you instructions on setting up a safe wireless router. Maybe that will make things work for you. If you need more information, be sure to include all missing information in your next post.

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your modem.
  2. attach a class (usually supplied with the router) ethernet cable cat5e Internet/WAN port of the router to the ethernet port on the modem.
  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.
  4. turn on the modem. After that all the lights are on, turn on the router.

  To configure the router:

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine. The first thing to do is to change the default password because * all * known default passwords for different routers.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar. ;-)

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). Most computers purchased during the last 4 years have the wireless hardware that will support WPA2-Personal (also known as WPA2-PSK). This is the desired encryption level. If your wireless hardware is older, use WPA. Don't use WEP, because who is easily broken within minutes. So go ahead and set the Security Mode WPA2-Personal. Do this and enter a password. For example, you could use the password ' here be dragons, beware you scurvy dogs! The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the ethernet cable and wireless of the computer should see your new network. Enter the password that you have created (exactly as you wrote it with all capital letters and punctuation) to join the network and start surfing. MS - MVP - Elephant Boy computers - don't panic!

• I have a laptop with Windows XP that show an icon connected to the internet, but I can't access the internet.

  Hello

  I have recently setup a wireless connection from my laptop on Windows 7 works very well. but I have a laptop with windows xp that show an icon connected to the internet, but I can't access the internet can you please help me.
  Thank you
  original title: wireless internet

  Do you receive kb from the internet source or is it local only, and when trying to access the page host does upward with the site not found or 404 error, have you tried to repair the connection, it could be your antivirus protection is blocking the signal.

• Network Assistant will not connect pc to the LAN, but connect to the internet properly

  My main PC had been connected to a local network of four PC but abruptly dropped from the network.  I can connect to the internet OK, but the wizard does not reconnect me to the local home network.  I read other articles on test and checks and everything seems to be okay, but when I check my network places other computers are running and are not displayed.

  Try the following and see if it helps:

  "You can not access the shared files and folders or browse computers in the workgroup with Windows XP"
    <>http://support.Microsoft.com/kb/318030 >

  HTH,
  JW

• Not connected to the Internet in with Airtel beetal 220 bxi modem with BSNL connection but wifi shows connected.

  I use windows XP and I use a modem wifi from Airtel (beetal 220 bxi) and I use BSNL connection, I set the BSNL dial the password for wifi definition so that only wifi must be connected automatically to access internet. Since a few days my internet worked fine, but after that it connects for a very short period of time say 10 minutes and then disconnected while wifi shows connected and when I ping IP address to the command run it shows that it is connected and part of the answer is displayed in the run window. My wifi shows connected, but I can't access the internet now a days showing also disconnected wifi and when I click on the wifi button, it shows "error loading plug in, application will exit" and when I click on this point, then all windows will be closed. To connect to the internet, I have again to restart the notebook and there still internet connect for 10 min and same situation happen again. Please help me solve this problem... I am so in troble now a days because of this problem. best regards: Ravindra

  Hello Ravindra,

  I suggest to look at this article on troubleshooting your internet connection in Windows XP:
  "How to troubleshoot possible causes of connection problems in Windows XP Internet.
  http://support.Microsoft.com/kb/314095

• Computer seems to be connected to the internet but cannot access web pages

  It says its connected to the internet and it can download the automatic updates, but when I open internet explore or mozilla or browser accesses a web page.

  The problem does not change if it connected to a hard line or wireless.

  The computer is a Latitude D620 on windows xp, if that helps.

  What happens when you try?

  Have you tried resetting IE?  (Tools |) Internet Options | Advanced...)

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection.

  I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection. It connects to other networks wifi very well with Internet access, is that the wireless in my house what it connects to. When I diagnose the problem, it says "Cannot communicate with DNS server (208.67.222.222)", and then under that it says: "languished network diagnostics remote hosts, but had not received a response." It connects to the Internet through an ethernet cable, but it is rather annoying pulling the cable autour. I currently have Windows Vista Home Premium. Thank you!

  original title: Internet connectivity problem

  Hello

  Now, you may need to contact the support of Panda Internet Security centre to change the settings so that wireless is enabled through it.

  Support link: http://www.pandasecurity.com/homeusers/support/

• I am connected to the internet, but my network sharing Center proclaims that I'm not.

  The paradox connected but not connected

  I am connected to the internet, but my network sharing Center proclaims that I'm not. Because some of my programs believe later, they refuse to patch. Also, I used the antivirals ware, scans, System Configuration and deleted and later restored the wireless network.

  Any help would be greatly appreciated. Thanks in advance.

  Hello

  1 reboot as often, this allows the refresh icon and also stops a few things of
  interfere with the slot troubleshooting process.

  Do a 1 Restore Point then you can go back to where you were if necessary.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  ------------------------------------------------------

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Do
  It will be the same for network (NIC) card - then right click on the devices and UNINSTALL - Reboot -
  update the driver stacks.

  Now go look at the site of the manufacturer of the system for the updated drivers.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -----------------------------

  Allow you to reset your TCP/IP stack just to make sure:

  Start - type in search - ORDER - search box at the top of list and RIGHT CLICK – RUN AS ADMIN

  Enter these one at a time (or copy and paste) and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  Reset

  ----------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT.

  ---------------------------------
  Other tips:

  If the use of a wired cable - Control Panel - device - network adapter - (NIC) Manager - double
  Click Advanced settings and set the "speed & Duplex" 10 Mbps full duplex and then try 1/2
  double-sided. Be sure to APPLY / OK. Maybe some help here: (don't forget the answer is)
  complicated because there's probably more than one single thing, the origin of the problem)

  Others.

  http://www.pctipstricks.com/tips-for-troubleshooting-network-cable-unplugged-error-for-wired-Microsoft-platform-PCs/

  http://www.how-to-hide-IP.info/2009/05/16/CYBERGHOST-VPN-fixing-network-cable-unplugged-error/

  http://www.annoyances.org/exec/Forum/WinXP/1109372091

  There are many causes, one of which is the small monitor pays attention to the evil network device.
  You can try to disable any other network such as WiFi device and reboot to see if that has an effect.

  Still a problem of equipment such as a loose network card that is not properly attached to the computer can
  cause this.

  http://compnetworking.about.com/od/WindowsNetworking/f/cableunplugged.htm

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Why my laptop wireless computer connect to the internet first thing in the morning and late at night, but not during the day.

  I wonder if you can help me please?

  I have problems with my satellite internet access on my laptop wireless.  He beautifully connects to the router and the signal is excellent. However, I'm unable to connect to the internet.  I can use the laptop first thing in the morning because it connects right away, but I would say that 95% of the day I can't use it at all.  Sometimes it will work later in the evening.  I learned this could be due to the intensity of the signal and that some suppliers to fall during the day.  My desk top connects perfectly (if the weather permits it) but is not on the wireless network.  I had no problem with my laptop when I used my previous service provider.  It becomes more frustrating that the inability to use the internet visited my lap top unnecessary.  I can't use it on my neighbors wireless network no problem at all but they we internet different provider.  Can you please help because I don't know why it works first thing in the morning and sometimes late at night, but not during the day?  No matter where the lap top is the first thing in the morning, it will work even if it is forty feet away.  I can sit during the day with my phone right by my router and it still not connect to internet even though the router signal strength is excellent and desktop is on the internet.  Any help would be great, because it leads me into the wall!  I am using WIndows 7 on my lap top from acer.

  Kind regards

  Julie

  I would like to thank everyone for their help with my question.  I can tell you now that I have it solved and I'm pretty embarrassed to say the least.  Following a change of internet service provider, I put a cable into the wrong port on the router... silly me!  It works perfectly now. Thank you once again.

• Satellite L455-S5045 laptop Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access.

  PC laptop Toshiba Satellite L455-S5045, Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access. go to google.com and States page cannot be displayed, I ran diagnostics and reports, everything is configured properly. the wireless signal that d-Link has is 802.11n with a WiFi Code and running XP, I have WIN 7. Do I need to driver 802.11n, if I do, why I can not download it

  Hello

  To help you better, please answer these questions.

  1. don't you say no Internet access in the notification bar?

  2. what diagnosis you have to run?

  3 did you do changes on the computer before the show?

  To solve your problem, try the provided items.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the link:

  Troubleshooting Wizard

  Reference (my computer can not connect to Internet)

  http://support.Toshiba.com/support/troubleshootSelfService?PRDTYPE=computers

  If you need help with the Windows operating system, just tell me and we will be happy to help you.