Similar Questions

• Connected to the Internet of VPN remote access VPN clients

  Greetings,

  I need to remote VPN clients to connect to the Internet from the same server VPN ASA

  "client connects to ASA the external interface VPN tunnel can access Internet from the same external interface ASA new."

  Thank you

  you need to configure "same-security-traffic permit intra-interface" on the SAA.

  Also, need to configure the relevant statements of nat for your range of pool of customers.

  i.e.

  Global 1 interface (outside)

  NAT (outside) 1 access-list anyconnectacl

  where anyconnectacl is the pool for your customers:

  permit ip 172.16.1.0 access list anyconnectacl 255.255.255.0 any

• VPN connects but stops internet surfing

  Dear all,

  When I connect to my corporate network through the vpn cisco client, it connects successfully and all required applications runs BUT

  Internet traffic stops, resulting, no. Browsing, etc etc.

  Please let know us, if I need to check the configuration of the vpn client or do I need to add something to my cisco 2811 router,

  Kind regards

  Junaid

  There are two ways to achieve this. If you want your users to use their local ISP gateway, you will want to configure the tunneling split for the customer group. Split tunneling is configured on the router and identifies which networks should be protected by the tunnel. Alternatively, you can tunnel all traffic from the client to the hub router when connected and set up hairpin of routing for Internet access. Here's the configs to sample from each.

  EasyVPN w / split Tunneling sample:

  http://www.Cisco.com/en/us/prod/collateral/iosswrel/ps6537/ps6586/ps6635/ps6659/prod_white_paper0900aecd80313bf8.PDF

  VPN Client Internet audience on a stick:

  http://www.Cisco.com/en/us/products/sw/secursw/ps2308/products_configuration_example09186a008073b06b.shtml

• Unable to connect to the Internet, the error message "Cisco AnyConnect VPN agent service is not responding. Please restart this application after a minute"

  Original title: unable to connect to the internet

  Whenever I connect to my computer and get it on my desk, it goes on to say that Cisco AnyConnect VPN Service not available. How can I fix? I am not connected to the internet and I can't connect to the internet as well. He said also Cisco AnyConnect VPN service agent is not an answer. Please restart this application after a minute. Also, I can't use my firewall for some reason, if I try to allow its loading and the greenbar's going that far - then stops and says that there is an error. I forgot where I tried to activate.

  Oh thanks for the help but I fix it myself. I just did a system restore to a month before

• PPTP connected cisco VPN but Internet not working

  What wrong with my setup but my device not "connected to the internet, I use ubuntu 12.04 LTS
  Cisco 1841

  version 12.4
  no service pad
  service tcp-keepalives-in
  service tcp-keepalives-out
  service timestamps debug datetime msec
  service timestamps log datetime msec
  no service password-encryption
  !
  hostname Router
  !
  boot-start-marker
  boot system flash c1841-ipbasek9-mz.124-24.T.bin
  boot-end-marker
  !
  logging message-counter syslog
  enable secret 5 $1$eb9Q$7kMUF5Am0kVn/QXwssfrD/
  !
  aaa new-model
  !
  !
  aaa authentication login default local
  aaa authentication ppp default local
  aaa authorization network default local
  !
  !
  aaa session-id common
  dot11 syslog
  no ip source-route
  !
  !
  !
  !
  ip cef
  ip name-server 202.134.1.10
  ip name-server 202.134.0.155
  multilink bundle-name authenticated
  !
  vpdn enable
  !
  vpdn-group PPTP
  ! Default PPTP VPDN group
  accept-dialin
  protocol pptp
  virtual-template 1
  !
  !
  !
  !
  !
  username ala***n password 7 051B131C2A4343
  username fa***ul privilege 15 password 7 03520B59565F701C16594B51
  archive
  log config
  hidekeys
  !
  !
  !
  !
  !
  interface FastEthernet0/0
  ip address 222.124.152.181 255.255.255.224
  no ip redirects
  no ip unreachables
  no ip proxy-arp
  ip flow ingress
  ip nat inside
  ip virtual-reassembly
  duplex auto
  speed auto
  no mop enabled
  !
  interface FastEthernet0/1
  description ====LOCAL=====
  ip address 192.168.100.1 255.255.255.0
  ip access-group 100 in
  no ip redirects
  no ip unreachables
  no ip proxy-arp
  ip flow ingress
  ip nat inside
  ip virtual-reassembly
  duplex auto
  speed auto
  no mop enabled
  !
  interface Virtual-Template1
  description ##PPTP TUNNEL##
  ip unnumbered FastEthernet0/0
  no ip redirects
  no ip unreachables
  no ip proxy-arp
  peer default ip address pool PPTP_POOL
  no keepalive
  ppp authentication pap chap ms-chap
  ppp timeout idle 360
  !
  ip local pool PPTP_POOL 192.168.101.110 192.168.101.125
  ip default-gateway 222.124.152.161
  ip forward-protocol nd
  ip route 0.0.0.0 0.0.0.0 222.124.152.161
  !
  no ip http server
  no ip http secure-server
  !
  ip nat pool fahrul 222.124.152.181 222.124.152.181 prefix-length 29
  ip nat inside source list 77 pool fahrul overload
  !
  access-list 23 permit 10.10.20.0 0.0.0.255
  access-list 77 permit 192.168.2.0 0.0.0.255
  access-list 100 remark auto generated by SDM firewall configuration
  access-list 100 remark SDM_ACL Category=1
  access-list 100 permit ip 192.168.100.0 0.0.0.255 any
  access-list 100 deny   ip host 255.255.255.255 any
  access-list 100 deny   ip 127.0.0.0 0.255.255.255 any
  access-list 100 permit ip any any
  access-list 101 remark auto generated by SDM firewall configuration
  access-list 101 remark SDM_ACL Category=1
  access-list 101 permit udp host 203.197.12.30 eq domain host 121.243.96.154
  access-list 101 permit ip 10.10.20.0 0.0.0.255 192.168.100.0 0.0.0.255
  access-list 101 permit ip 10.10.10.0 0.0.0.255 192.168.100.0 0.0.0.255
  access-list 101 deny   ip 192.168.100.0 0.0.0.255 any
  access-list 101 deny   ip 10.0.0.0 0.255.255.255 any
  access-list 101 deny   ip 172.16.0.0 0.15.255.255 any
  access-list 101 deny   ip 192.168.0.0 0.0.255.255 any
  access-list 101 deny   ip 127.0.0.0 0.255.255.255 any
  access-list 101 deny   ip host 255.255.255.255 any
  access-list 101 deny   ip host 0.0.0.0 any
  access-list 101 deny   ip any any log
  !
  !
  control-plane
  !
  !
  line con 0
  line aux 0
  line vty 0 4
  

  Inside the network is also not in the definition of NAT. Add the following:

  access-list 77 allow 192.168.100.0 0.0.0.255

  Sent by Cisco Support technique iPad App

• I can't get my Satellite L70C - 13 c, connected to the internet.

  I can not connect to Internet on my Toshiba brand new. There are three likely causes:
  (1) on my BT Home hub (modem-router) settings are wrong.
  (2) on my Toshiba drivers must be updated, in particular the VPN software supported.
  (3) it is a matter of Microsoft.

  Experts from the BT forum give me advice here:
  httpsXXX://community.bt.com/t5/Connected-Devices-Other/I-can-t-get-my-new-laptop-connected-to-the-internet/m-p/1549571/highlight/false#M115708
  and I am trying to establish if the address IP etc I need relate to BT

  Experts of the forum Microsoft give me advice here:
  httpXXX://answers.microsoft.com/en-us/windows/forum/windows_10-networking/no-access-to-the-internet-on-a-new-win10-laptop/621c11b9-75df-4e3d-bd55-27fff2421c17

  Their methods 1 and 2 did not work. I'm not willing to change the registry - I am not convinced.

  So the problem I have unsupported software VPN? In this case, or if there are other updates of driver I need, how can I get them if I can't access the internet?

  Another problem is that I tried to load it on my new PC (the objects referred to in the forums) from a memory stick, after using my old PC to save them. My new PC has a Home365 month free trial but it is based on a cloud then is of no use. I bought subscription a year from Office365 but need internet to install it. I can't find my new Toshiba's desktop already installed any software on it.
  Where can I get out of here, please? My Toshiba drivers and software are up to date?

  PS I had problems this announcement - in which case it's because of my links, I inserted the XXXs

  My son-in-law came yesterday. I'm sorry if I'm about to use the technological terms wrong, but the new laptop does not connect to the IPhone (or vice versa), but connects to my modem/router. Also, my Toshiba connects to the internet via an ethernet cable.

  He concludes that there is a software problem with the Toshiba wireless adapter.

  I've decided that I want more stress and wasted hours over this so I'm about to go back to retailers (again) and require that they sort or replace my laptop.

  I will update this when it is finally settled in case it helps others with a similar problem.

• I am connected to the internet, but my network sharing Center proclaims that I'm not.

  The paradox connected but not connected

  I am connected to the internet, but my network sharing Center proclaims that I'm not. Because some of my programs believe later, they refuse to patch. Also, I used the antivirals ware, scans, System Configuration and deleted and later restored the wireless network.

  Any help would be greatly appreciated. Thanks in advance.

  Hello

  1 reboot as often, this allows the refresh icon and also stops a few things of
  interfere with the slot troubleshooting process.

  Do a 1 Restore Point then you can go back to where you were if necessary.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  ------------------------------------------------------

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Do
  It will be the same for network (NIC) card - then right click on the devices and UNINSTALL - Reboot -
  update the driver stacks.

  Now go look at the site of the manufacturer of the system for the updated drivers.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -----------------------------

  Allow you to reset your TCP/IP stack just to make sure:

  Start - type in search - ORDER - search box at the top of list and RIGHT CLICK – RUN AS ADMIN

  Enter these one at a time (or copy and paste) and press ENTER after each

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  Reset

  ----------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT.

  ---------------------------------
  Other tips:

  If the use of a wired cable - Control Panel - device - network adapter - (NIC) Manager - double
  Click Advanced settings and set the "speed & Duplex" 10 Mbps full duplex and then try 1/2
  double-sided. Be sure to APPLY / OK. Maybe some help here: (don't forget the answer is)
  complicated because there's probably more than one single thing, the origin of the problem)

  Others.

  http://www.pctipstricks.com/tips-for-troubleshooting-network-cable-unplugged-error-for-wired-Microsoft-platform-PCs/

  http://www.how-to-hide-IP.info/2009/05/16/CYBERGHOST-VPN-fixing-network-cable-unplugged-error/

  http://www.annoyances.org/exec/Forum/WinXP/1109372091

  There are many causes, one of which is the small monitor pays attention to the evil network device.
  You can try to disable any other network such as WiFi device and reboot to see if that has an effect.

  Still a problem of equipment such as a loose network card that is not properly attached to the computer can
  cause this.

  http://compnetworking.about.com/od/WindowsNetworking/f/cableunplugged.htm

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Error: "connection attempt timed out, please check the connectivity of the internet" when trying to connect to Cisco AnyConnect 2.5 on Windows 7 x 64 computer with modem usb wireless HSIA.

  Original title: issue with Cisco AnyConnect 2.5 on win 7 x 64 when connecting to the internet using wireless HSIA usb modem.

  I have win 7 x 64 enterprize edition on my laptop.

  I have problems with Cisco anyconnect VPN client. When I'm on my corporate network it works fine.

  But when I connect to internet using HSIA modem usb wireless home form, client AnyConnect VPN will not connect. The error I get is "connection attempt has expired, please check internet connectivity.

  Please help me to solve this problem as soon as possible.

  Hi Manish,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet forums for assistance.

  I also recommend that you contact the VPN support to help:

  https://supportforums.Cisco.com/community/NetPro/security/VPN

• Connection VPN, but NO traffic

  This seems to be a common theme, but no other positions are exactly like mine.

  I have 4 clients of VPN (different versions) software that can connect to a VPN concentrator 3005. 2 clients work very well, they connect and can ping the server. I have two clients who connect but cannot ping the server.

  1 customer - who can NOT ping. VPN client 4.0.3c on XP Pro IP 10.10.0.0/16 private leaving a 501 PIX via Internet to a VPN 3005 concentrator inside a LAN 10.100.30.0/24.

  ---> PIX 501 VPN client - > Internet VPN Conc 3005--->---> LAN---> Server

  2nd customer who cannot ping. 4.6 VPN client. on XP Pro private IP 192.168.17/24 leaving a MS Win 2 K through the Internet server in a VPN 3005 concentrator inside a LAN 10.100.30.0/24.

  Client VPN---> Win 2 K server - > Internet VPN Conc 3005--->---> LAN---> Server

  Both can make the VPN connection to the VPN Conc throughout the day, but cannot ping the server. BUT other clients can ping the server.

  ??? Help?

  See MTU:

  http://www.Cisco.com/en/us/Tech/tk175/TK15/technologies_tech_note09186a0080093bc7.shtml

  NAT - T see:

  command:

  ISAKMP nat-traversal 20

  Link:

  http://www.Cisco.com/en/us/products/sw/secursw/ps2120/products_command_reference_chapter09186a00801727a9.html#wp1027312

  Network address translation (NAT), including translation of address of Port (PAT), is used in many networks where IPSec is also used, but there are a number of incompatibilities that prevent IPSec packets to cross successfully. NAT route NAT devices enables ESP packets to pass through one or more NAT devices.

  The firewall supports NAT traversal as described by the Version 2 and Version 3 of the IETF "UDP Encapsulation of IPsec packets" project, available at http://www.ietf.org/html.charters/ipsec-charter.htmland NAT traversal is supported for dynamic and static cryptographic cards. Route NAT is disabled by default on the firewall.

  To enable NAT traversal, check that ISAKMP is enabled (you can activate it with the if_name isakmp enable command) then use the nat traversal [natkeepalive] command isakmp. (This command appears in the configuration if both ISAKMP is enabled and NAT traversal). If you have enabled NAT traversal, you can disable it with the nat-traversal No. isakmp command. The valid values for natkeepalive are from 10 to 3600 seconds. The default value is 20 seconds.

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• iPhone cannot connect to the Internet via time capsule

  I have a current execution capsule 7.7.7 time. IPhones in my house can't get internet service when it is connected to the time capsule. My iPad, I tap on it now, can get internet time capsule service. My Mac can connect. I restarted the capsule of time with my modem cable many times. My passwords are correct.

  I also have a smart Vizio TV that does not connect to the Internet. This is true with wifi and also with a wired connection to the time capsule.

  I don't know what the cause of the problem. Any help will be appreciated.

  He has worked in the past and now could not or never worked?

  Apple routers can sometimes decide autonomously switch to bridge mode. If your cable modem is not a router, you MUST have the apple router... TC in your case DHCP and NAT mode.

  If you have not done before you reset the TC at the factory and re-do the installation. Here are my recommendations.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  Then redo the configuration of the computer that you want to use for TM using Airport utility.

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the wireless is still an issue defined wireless names like TC24ghz and assigned the 5 GHz other name... eg.TC5ghz.

  Finally, use fixed channels in 2.4 ghz... try 11, 9 and 6, in that order.

  (leave the security for a few minutes and see if that makes a difference).

  For iphone and TV with problems in your Setup program ensure that the TC is NAT and DHCP... try to use a different such as google public DNS 8.8.8.8 and 8.8.4.4

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  ** 3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC.

  Ignore this point if you don't understand it... after the return if you drop questions.

  4. be sure that IPv6 is set correctly in the computer. IE link-local only for ethernet or wireless depending on whether you are using. Car is not good enough.

  Tell us which modem cable, you have, make and model please?

  The TC has problems with some popular brands... one of the SB series a modem port is malfunctioning.

• iPad forget password and number to connect to the internet

  Hello

  , I forgot the password for my ipad and it systdmatiquement the connection with the internet. He asks "requires password at startup".   I don't want to format because I have several picture in the camera.

  How do I do?

  IOS 8.1.2

  If you forgot the password:

  https://support.Apple.com/en-us/HT204306

  If you forgot the Apple ID password:

  https://support.Apple.com/en-us/HT201487

• iPhone will not stay connected to the internet?

  * Posted on MacRumors forums but no answers *.

  So basically since a few days my phone sometimes don't remain not connected to the internet network of BT-Hub3. I connect to it and then sometimes, it will stay connected for a minute for a few seconds and then disconnect. When I go to the wifi thing it seems available to connect to. After a couple of times that to happen, it will say wrong password (this is the password) and disconnect me and then I have to type the password. Repeat to infinity. It's honestly so frustrating.

  Sometimes it will stay and be fine but his is happened twice in the last few days and never happened before with any phone I've had.

  I try my phone with my BT-Hub4 internet network and it will stay connected. The only problem with this is that the internet is further (bottom), so has a low connection that does not charge anything unless I lean on my bed.

  Initially, I assumed my internet pick, but I'm typing this I am connected to the network BT-Hub3 without disconnect him, even once.

  I had the phone for a year and 2 months (previous owner had since October/November/December in the year of release) and recently got a replacement of the unofficial battery if this of any help. I also still have my phone on the low power mode. The phone always properly connect to the BT-Hub3 network even with unofficial battery and low power however mode.

  I had several other problems with the phone (camera, apps download not heat no reason apparent, random battery drains despite the new battery in just 3 months and has the same problem with the battery, slow Touch ID that apparently is not normal), which most recently happened.

  I had all the settings to reset a week or two ago but surely if who messed with my settings internet I would have had the internet issue earlier? Not sure if I should try to reset the network settings. I hate this and only do if I need to.

  One last note, I have the latest version of iOS so ignore saying his 9.3.2 on

  Hi pinkdolphins0400,

  Thanks for posting in the communities of Support from Apple! I understand that you are having problems with your iPhone does not stay connected to your internet connection at home. I use my home Wi - Fi network to stay connected, so I use all the cell data, if I can understand wanting to make sure that you are able to stay in touch. I am pleased to provide you with a few suggestions for you.

  The first thing I recommend you do is follow the steps described in the following article. It seems that you have already experienced some of these steps, but I want to be sure that you have covered everything.

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  Since you mentioned that your iPhone will stay connected to your network to another, you can take a look at the network settings for the one that you are having problems staying connected to. Article below provides information about network configurations suggested for Apple devices. You can also check with the manufacturer for your BT 3 - Hub see if there are updates that must be performed. This can cause problems with disconnects.

  Recommended settings for the WiFi routers and access points

  For other problems you mentioned (apps do not download, camera, battery draining, contact ID, etc.) reset settings was a big step in troubleshooting to try. If these things are always happening, I recommend making a backup of your iPhone and then restore it via iTunes. The backup will ensure that your data is saved. When you perform the restore via iTunes, you'll want to set up as a new device (temporarily), and then test it. Once you test, you can try to restore your backup. You can find all of the information below, you will need.

  The backup of your iPhone, iPad and iPod touch

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• Only Firefox and nothing else will be connected to the internet

  Here is what happened. A year ago, I've updated CDA Downloader on my computer. He was working before I did, and after I did, he said that he is not able to connect to the internet. Soon, I realized that this had happened to all currencies on my computer (for example, includuing) with the exception of my old version of Firefox. If I try and update, it stops working too.

  I tried everything, including the obvious answers online. I'm not the value of the settings 'LAN', and I did not add-ins, or whatever. Forums like this are frustrating because once other people get their answer, the cat is over, while nothing works for me. It's been a year and it's really VERY frustrating to deal with this for so long. Cannot use aps, impossible to download a LOT of software and can't get my audio books. Can someone help me please?

  So, what you say, it's that the problem does not exist with Firefox, but rather the problem is with other programs do not connect to internet - is that correct?

• Unable to connect to the internet update version

  I've updated to the latest version 35, but since then, the browser seems unable to connect to the internet. I thought it was my firewall that was blocking the program. I did what was suggested to work around this problem, that is, to remove my firewall and then add it again. But it does not solve the problem. There is nothing wrong with my internet, how am I be able to connect to internet by using IE or Chrome. And I was able to connect to the internet in the previous version of Firefox. Unfortunately, the new updated version is not allow me to. Have no solution?

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls