Connecting pieces of the system in the dock preferences

Similar Questions

• Automatically use the wired on wireless LAN connection when using the docking station

  Hey guys!

  I use the my T500 with the Advanced Mini Dock @TheDude recommended in this thread: http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T500-Recommended-Compatible-Docking-Station...

  I had almost a month now, and whenever I anchor my laptop I have to pass the connection wireless switch off hard or using FN + F5 and extinguish this particular radio.

  Is it possible to have the computer automatically choose the wired connection when it is available, otherwise use the wireless radio?

  I use Windows 7 Prof 64 bit.

  Thank you

  c1p0

  ThinkVantage Access Connections (AC) can be configured to do this. Change your location profile and change the order of the adapter associated with this place, for example, order first as Wired and Wireless second.

  When I am connected Wired and I pull the Ethernet cable, AC will switch to using wireless automatically. When I put the Ethernet back in, it starts automatically by using the wired and wireless don't report limited or no connectivity (which means that the switch has occurred). You will have to perhaps set up wireless in AC power options, i.e. disable radio when not in use (I did not sentence again).

  This could be similar to a docking station solution. Mine is without docking station; When I'm at the office and go to a meeting, I pull the wire and have continuity.

  Ideally, the CA should provide a solution. But it may take some fiddling.

• Mini Dock more Series 3 - is - do I have to connect the dock and the laptop or just the dock?

  My laptop not charging when I plug the adapter to the back of the stand.

  When I'm on the dock with the adapter plugged into the laptop, if I hover over the Green battery in the system tray icon, it tells me that I should plug the dock:

  "Alternating current is detached from your docking station.  Good battery charging and docking station operation, connect the AC adapter to the docking station. »

  I'm not supposed to use two separate power adapters, am I? (One for the dock and one for the laptop)?

  I think I might have a bad dock.

  you have that to plug in the dock, you don't need to be plugged into taking the laptop when you are connected.

  Remove the battery and anchor the laptop and press the button, does it start?

• System preferences icon has replaced the dock

  Hi all

  I have a strange behavior with the dock in macOS Sierra, especially with the "System Preferences" icon After you open the system preferences application, the icon was his suddenly replaced by another icon (see image below). It looks like a Doc App icon?

  

  I tried to remove the 'System Preferences' app to the dock and put new in. It's OK for a while, but something after a few hours or days, the icon has been replaced by the "Doc App" icon again? !!

  Is there anyone who has this strange behavior?

  Thank you

  Torp

  See this possible solution: Re: app icons disappeared from the dock

• Two external monitors can be connected to the docking station?

  Is it possible to connect two external monitors to a docking of HP 2740? If so, how it is with 1 single VGA port on the docking station. The tablet which is embodied is a HP Elitebook 2760P.

  Yes, you got that right.

  He landed again until what's available / condition on the 2nd external monitor. These days most of them VGA, HDMI and DVI while that few of them have display port too.

• No sound on HDMI when connected to the Dock among

  Hello

  I am facing a problem with the HDMI Audio output when my ThinkPad Edge E531 connecting to my TV via my among Dock.

  The HDMI connection is established and video works fine. However, I can not all sounds for the TV speakers (I use external speakers, but already disconnected those test - no difference).

  When I connect the HDMI directly on the ThinkPad cable, video and audio work perfectly. A configuration previously used with a LG monitor that has a HDMI output input and speaker works fine as well.

  Active audio devices:

  The TV that is connected to the Dock from among:

  SAMSUNG (Audio device high definition)

  Connected TV ThinkPad:

  Digital audio (HDMI) (Audio device high definition)

  More info:

  8.1 Windows x 64

  Intel HD 4000 graphics driver 10.18.10.3412

  graphics NVIDIA GeForce GT740M 9.18.13.2762 driver

  Any help would be greatly appreciated.

  Try to install the latest Intel graphics drivers since the Lenovo support site relevant to your computer. When asked leave to replace the automatically detected drivers (usually newer). It worked for me. (on Thinkpad Yoga)

• When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  Hello

  With Docking Station, you can connect all the cables for printer, keyboard and mouse, adapter directly to the charging station.

  So whenever you use a laptop, you have just dock the laptop on the docking station and not need to re connect all cables again.

  This will help you when you move frequently with the laptop.

  Docking station will save your time, outside any other aspect, that it has to offer.

  Zaki.

• Venue 11 keyboard connected to the docking station

  The place of meetings 11 keyboards can communicate with the Tablet when it is in the docking station?

  With the way the place of sessions 11 is in the docking station, it would be quite difficult to have a connected keyboard because he wouldn't level with your office.  If you use the docking station, shouldn't you already have an existing configuration of the Office you can take the keyboard and mouse of?

• sound on laptop lost when it is connected to the docking station

  laptop connected to the docking station and audio comes through the audio connection [headphones] on docking station.  No sound on computer

  Hello

  ·         If it works well before? If so, remember to do recent changes on the computer before this problem?

  When you connect the laptop to the docking station, the default audio output device will automatically change to the docking station. Similarly, in the case of plug in the headphones on laptop. I suggest you to check if the audio device by default from computer speakers is properly defined. Follow these steps:

  a. click the Start button, select Control Panel, click hardware and soundand then click sound.

  b. click the read tab make sure that the correct default audio device is selected. (For most users, the default audio device is pregnant.)

  c. If your default device is not set to the right audio device, on the read tab, select the appropriate device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, click OK.

  d. on the read tab, select the playback device, click set upand make sure that the configurations are set correctly.

  If the sound settings are set correctly and that your speakers are already set as default device, go to "Check if an audio driver is installed" now.

  e. Select the audio device you want as audio device by default, and then click set as default.

  f. click OK to save your settings.

  For your reference, follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Windows removes the internet conntction system. Connected directly to the modem. Have tried to go through just wifi. the same problem. Only happened for several weeks.

  Windows deletes internet conntction after a few minutes. The netgear and control panel says I'm always connected. Must reboot to get reconnected to the windows system. Connected directly to the modem. Have tried to go through just wifi. The same problem. Only happened for several weeks.

  Hi Sailortdt,

  Welcome to Microsoft Community where you can find the answers related to Windows.

  According to the description, it looks like you are facing a problem with network connectivity.

  It would be awesome if you could answers to these questions in order to help you further.

  1. have you made changes on the computer before this problem?

  2. you receive an error message or error code?

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• T410 does not connect to the docking station

  I have a Lenovo T410 and a docking station 4338. When I tried to join the computer to the docking station last night, he would not go. I don't see any obstruction or something wrong with the plug on each unit; the computer can't accumulate up as before.

  I have another station host I can try, which should help to determine which device is the problem, but I won't have access to him until next week.

  Have someone has encountered a problem like this? Any suggestions to correct?

  I compared the two docking stations and identified the problem. There are two plastic hooks built into the base, one to the right of the connector, one left and below. In a station works correctly these hooks are discarded because the computer is inserted, then spring back, now in place.

  On my post of malfunction the hooks were stuck, prevent the computer from insertion.

  I was able to fix the problem by pushing hooks with my finger, which take them off. If they stick once again I can try a Lube graphite.

• the door of the metal piece in the battery compartment that connects to the positive terminal of the battery fell - how to connect them

  The metal piece on the door has come loose, so the positive end of the battery can't touch to give the power of the mouse.  I need a picture of the configuration or a diagram of how this piece of silver can be attached to the door of battery on Microsoft Wireless Mobile Mouse 3000 model 1359

  Hello

  If there is a warranty issue, he has a 3-year warranty.

  Wireless Mobile Mouse 3000 - has a 3 year warranty
  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=113&active_tab=systemRequirements

  Microsoft Hardware Warranty Info.
  http://www.Microsoft.com/hardware/warranties.mspx

  You have 90 days while it is under warranty and if support from the date of the first event (call)
  defective they usually replace it free of charge for you in the United States.

  Hardware support of MS and warranty claims
  1-800-936-5700

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Unable to connect a Windows Vista system to the wireless network.

  Hi my friend has vista on her laptop

  Hi my friend has vista on her computer hp laptop and try to connect to wireless, the router is the work that we already have a toshiba windows 7 and a computer hooked apple laptop but cannot get his hook up which can make? On a side note, the only way I could hang up was to disable the security on my router, but it's only one thing soberly.

  Hi my friend has vista on her computer hp laptop and try to connect to wireless, the router is the work that we already have a toshiba windows 7 and a computer hooked apple laptop but cannot get his hook up which can make? On a side note, the only way I could hang up was to disable the security on my router, but it's only one thing soberly.

  The methods and capabilities to connect wireless depend more material especially involved and software/drivers for the said material.  I could suggest your friend update that make drivers for hardware devices for their particular & model of wireless device and see if that helps to connect to your network.

• 'iPhone Messages' icon appearing in the Dock

  I experienced this with Yosemite as well.  Don't remember what level it is resolved, but things were fine until I upgraded to El Capitan.  The 'Message' icon won't stop appearing on the left side of the bar on my Dock.  I did the following on the advice found in searches:

  -Open iMessage and disabled my account (this is what all our mobile devices are connected using)

  -Open system preferences... Notifications, click on "Messages" on the left pane, select 'None' and unchecked all boxes to 5 check

  -restarted

  Inevitably, as soon as a member of the family gets a text, the "Messages of the iPhone" sticker reappears.  It's ridiculous, and it's maddening.

  I hope someone has a solution...

  Thank you

  WoodlandsAggie wrote:

  The 'Message' icon... appearing on the left side of the bar on my Dock.

  Hmm, this is interesting because it is usually an enabled icon who lives not in the Dock will appear on the right side (before the divvider).

  And you clicked the control icon > remove the dock and he comes back?

• Apple Mail window does not appear when I click the icon in the Dock

  When you use Apple Mail, if I reduce the window, she collapses in the Mail dock icon.  When I single click on the Mail dock icon, nothing happens. In Safari and Photo, reopen their windows.  After clicking on the dock icon, Mail is the application to the front, so I can't click on window > Inbox to reopen the window.

  I do not use the Mission control, if it is not as if the window on another virtual desktop.  Is this a bug in the mail?

  MacBook Pro (15-inch, mid-2012)

  El Capitan 10.11.2

  Thank you!

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest by putting in place one of your e-mail accounts. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.