Connecting ps3 with ps3

Similar Questions

• Satellite Pro A100: Why can not connect Internet with the net card

  I can't connet Internet whith this net card, but I always connect it with a wireless network card

  Hello

  I put t know why you can not connect to the internet, but we need to study a little.
  Have you checked if the network card has been properly installed? The network adapter appears in Device Manager correctly?

  What do you use to connect to the internet; Modem or router WLAN?
  Have you checked the TCP/IP protocol if the IP address setting has been configured to automatically get?

  Check if there is an active firewall

  As you can see, there are a lot of restrictions and everything must be checked!

• M30: Connect only with 42.6 K - how to increase speed

  My M30 connect only with 42.6 K speed. I have try all options to increase the speed, but the success. If anyone has the solution, please send me email to [email protected].

  I try the other series on my telephone line and connect them to the speed of 52 to 54K. Desktop even connect at 54K.

  Hello

  Go to Device Manager and choose the modem. Then do a right click and properties.
  You will find many tabs. Please check if the port of Maximum speed in the Modem tab option is set to the highest value.
  In addition, you can check the button in the Advanced tab settings in Advanced Port the controller must also be on the high (max).

  Please check these possibilities.

  Good bye

• What do I have to remove the battery from my PC when I connect it with the cable?

  So that the battery do not damaged.
  What do I have to remove the battery from my PC when I connect it with the cable?
  Tell me what I need to do for that battery not damaged

  Hi mate,
  Don t worry, just use your machine and leave your battery in your machine, because an electronic load look at your battery, so no damage will be caused.

  You know, technology is in fact at a good level and I think it s ok to operate your machine with cables and battery SET. :

  Greetings

• Problem connecting wireless with my Tecra A8

  Hello

  I have problem connecting WiFi with my laptop Tecra A8. When I opened my laptop, it does not connect to the wireless network.
  I tried several ways to solve this problem.
  I updated for active connections, then I click on the Connect button after you select my wireless LAN, but it doesn't connect.
  Or I restart my computer, but it doesn't connect.
  However, it connects to the network wireless in anytime after about 15 minutes.

  Also when I tried to connect to the network wireless at home, but I couldn't t connect. I removed the password for the connection. Then I connected without any problem.
  I wonder that there is no problem with installation? Or my wireless card doesn't work?
  Can someone help me?

  Thank you

  > Also when I tried to connect to a home wireless network, but I couldn't t connect. I removed the password for the connection. Then I connected without any problem.

  According to the statement, all looks like that you try to use a password for encryption wrong!

• Pavilion g6: Atheros connection issues with Arris Modem

  Hi, I had the same problem with my laptop and Atheros network card, windows 7, it can not connect to the network with Arris modem but it works with other modems. I downdoaded the driver from the link you provided here, and it worked, my laptop connected to the network without problems, but after a month it stopped connecting to the network, I downloaded the driver again, but it did not work.

  @s_z,

  Hello and thanks for posting back.  Here is a link to a solution to problems of common connection to the problems of Atheros WLAN Driver and connection.

  Atheros WLAN Driver corrects connection issues with many new routers (Linksys, Netgear, D-Link, etc...)

  Please let me know how things are going.  Thanks again for posting and have a great day.

• Anatel Sony wireless mouse connects erratically with cursor. Battery life is very good. It also seems

  Anatel Sony wireless mouse connects erratically with cursor. The battery life is very good. The cursor problem also seems to be making the top and down arrows on my wired keyboard. When the cursor is engaged the arrows will work. When the cursor does not connect correctly the arrows do not work. The surace the mouse is on doesn't seem to be a factor.

  
  

• On the Sync Palm m500 using connection series with a dock under Windows 7

  Palm: m500

  Link: Serial (cradle)

  OS: Windows 7

  Problem: Palm Desktop 4.1.4 cannot be installed and does not synchronize Palm Desktop 6 using the serial connection.

  How can I synchronize the m500 using connection series with a version of PD under Windows 7?

  Nevermind, helped http://forum.brighthand.com/sync-windows-palm-os/261651-synching-legacy-pim-databases-palm-desktop-v-6-2-a.html .

• I have connection problems with Skype video chat (Internet Explorer 8 - Windows XP pro). What I haveto do to fix this?

  I have connection problems with Skype video chat (IE 8 - XP pro.) What should I do to correct this?

  Hello

  go to skype.com and make sure you have the latest version of their software.

  Kind regards.

• Internet connection shared with Xbox

  I need to restart my internet connection shared with my Xbox everytime I turn it on to connect to Xbox Live.  How can I keep this happen and more keep the Xbox all the time?

  Hi JohnnyBz,

  I suggest you send your query in Xbox live forum to get the best support that this is a dedicated forum for Xbox live. Link: http://forums.xbox.com/

  With regard to:

  Samhrutha G S - Microsoft technical support.

• Windows keeps connect me with a temporary account

  I use windows vista and everytime I log in, I try to connect with my account that it connects me with a temporary. I tried a disconnection and rear connection, but the same thing happens. What should I do to stop this!

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  These problems and similar bugs can help:

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  A temporary profile is loaded after you connect to a Windows Vista-based system
  http://support.Microsoft.com/kb/947242

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  -----------------------------------------------

  Try these to erase corruption in the case where it plays a role.

  1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  3. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Other methods:

  Use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK then go back
  and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the same for others
  accounts that may be difficult. If necessary you can also reset your password in the accounts.
  Do not forget to leave your Admin account and the other to the desired level.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I forgot my password to connect you with my email address on my Facebook account

  original title: forgotten password

  I forgot my password to connect you with my email address on my Facebook account. When I tried to change my password, I received a link to go to my other email with my blackberry. When I went online to Facebook login and tried to put in my password, it made a new account with a different password. I'm so confused as how to cancel this second account that I didn't want in the first place and how do to just change my password with my old registration email address so I can be on Facebook as before.

  To help with this problem, please go to Facebook Help Center .  They can help you better than we can in the Windows Vista forum. Boulder computer Maven
  Most Microsoft Valuable Professional

• connection Bluetooth with the mobile phone cannot be established

  HP pavilion laptop g6 with windows 7.

  connection Bluetooth with the mobile phone cannot be established, all drivers were dated until, when it is associated with my phone samsung smart, driver downloads and everything is ready for use.but when click the smart phone

  It shows offline and it said no device ID is given,

  What to do, please help

  my portable BT device is defective? or some other problem, has also tried to connect other phones too, but same problem.

  Rgds,

  Hello

  I just want if sure that you have the right driver installed from this first link provided in the answer from the Support Engineer. If you click this link, then clikc the first option 'Use the device in Windows 7 Troubleshoot utility' need you a paragraph with a link to the appropriate driver.
  I will link here just to make sure.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?swlinkmsg=200&cc=us&DLC=en&docName=c01590950&LC=en&product=5068623&softwareitem=ob-76382-1
  It's the right driver you need. Please verify that this is the one that you have installed and do we know the results.

• Connection problems with atheros ar9002wb-1ng

  I have 2 computers laptop toshiba satellite.  I just updated my router to Belkin ac1200 wireless router.  I'm having connection problems with my satellite l750, with atheros ar9002wb-1ng wireless network adapter - keeps disconnecting with a signal strength low however the other satellite I with a realtek rtl8188ce wireless lan has an excellent signal strength and works very well - how to fix this?   I'm not very techno so easy instructions please.  Thank you.

  Hi Jak,

  Welcome to Microsoft communities.

  I understand that the wireless connection is disconnected.

  1. don't you make recent changes that caused the problem?
  2. any message/error code?

  Try the steps in the following methods and check the status of the issue.

  Method 1:

  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Configure the computer to clean start State to check software conflicts and check the status.
  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 of the article mentioned above.

  Method 3:

  Wi - Fi and in Windows network connection issues.
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Please report if you are still having the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.

• I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router. Can someone help me with the settings that could take care of this problem?

  I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router.  Can someone help me with the settings that could take care of this problem? I have a Dell netbook and a laptop HP working with the router so I know it works.  The Nook also works in a Barnes & Noble store it seems so that the works of Nook.  I have a similar problem with a LG Vortex phone where I can't do the wi - fi connection.

  Please post on the Support forums technical Nook for help because it is not a Windows 7 problem...

  http://bookclubs.barnesandnoble.com/T5/nook-technical-support/BD-p/nooksupport

  .. .also than that...

  http://www.barnesandnoble.com/u/nook-support-connectivity/379002491/

  Don't forget the network encryption type, IE. WPA2/WPA and key/password / password must match the wireless router/access point.

  See also this about WPA2 on the MN-700...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-connect-to-MN-700-wireless-router/1789978f-7C90-4686-A956-2d17eb79960d

• I get the message when you set up a new user "a temporary user profile is loaded because Windows was not able to connect you with your local profile."

  Dear all,

  I have a Windows PC in my office. Because of some configuration issue, I deleted the domain user and tried to connect to the system with the same user credentials. It identify you with the credentials of the user, but I get a message saying: "a temporary user profile is loaded because Windows was not able to connect you with your local profile."
  This system is joined to the domain and the profile is an Active Directory user.
  Here are the details of the event ID:

  Details Product: Windows operating system Event ID: 1515 Source: Userenv Version: 5.2 Symbolic name: EVENT_PROFILE_DIR_BACKEDUP Message: Windows has backed up this user's profile. Windows will automatically try to use the saved profile the next time the user connects. Explanation A temporary user profile is loaded because Windows was unable to connect with your local profile. A possible cause of this is if your local profile has been corrupted or that you no longer have the correct privileges for profile records. Note: Any changes made to the temporary profile is lost once you disconnect. User action Search the profiles additional events in the event log for more information on the reason why this happened or contact the system administrator for further assistance.

  There is currently no article for this specific error Microsoft Knowledge Base or an event message. For more information on other technical support options, you can use to find answers online, see http://support.microsoft.com/default.aspx.

  Please, help me to create the same user profile in the system with formatting system.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/947215

  It will be useful.