Connecting Wireless Router WRT160N error message

Similar Questions

• Whenever I have connect my system, the error message 'C:\Users\Dell\AppData\Roaming\mapnc.dll' does not exist.

  Whenever I have connect my system, the error message appears which displays

  "There was a problem starting, the specified module could not be found."

  and sometimes,.

  "C:\Users\Dell\AppData\Roaming\mapnc.dll" is not exist.

  How can I solve this problem? Please help me. The information system is given below,

  Name of the operating system Microsoft Windows 7 Ultimate
  Version 6.1.7601 Service Pack 1 Build 7601
  Manufacturer of operating system Microsoft Corporation
  System model Inspiron N5010
  System Type X 86-based PC
  Processor Intel (r) Core i5 CPU M 460 @ 2.53 GHz, 2528 Mhz, 2 Lossnay, 4 logical processors
  A09 BIOS Version/Date Dell Inc., 19/10/2010
  SMBIOS Version 2.6
  Physical memory (RAM) installed 4.00 GB
  1.86 GB available physical memory
  5.85 GB total virtual memory
  4.47 GB available virtual memory
  2.93 GB page file space
  Paging file C:\pagefile.sys

  Avira Antivirus Premium is also installed on the system. The error message from the last weak. However, the system had no no ill effect after that.

  Hello

  Thank you for writing to Microsoft Communities.

  1. have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned from the link and later a update on the State of the question.

  Method 1: Try to start the system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: If the issue does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.

  Please follow these recommended steps and post if you still experience the problem.

• I downloaded the free app Adobe Content Viewer, but when I try to connect, I get an error message "authentication failure". What should I do to fix?

  I downloaded the free app Adobe Content Viewer, but when I try to connect, I get an error message "authentication failure". What should I do to fix this?

  Did you go digitalpublishing.acrobat.com, connect with the Adobe ID and accept the terms of use? If this is not the case, do using a computer. You can't do this from a mobile device. This is not an automatic process, you must do it manually.

• Wireless not connect not not set error message in "error 1747: the authentication service is unknown".

  Original title: wireless connection does not

  So, I just got a laptop that has windows 7, I had to replace the internet and it keeps poping up with "error 1747: the authentication service is unknown." IV tried it get but nothing works not all boards

  Hello

  According to the description, I understand that your wireless connection is not working and give the error code that is "error 1747: the authentication service is unknown". I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem.

  These problems may occur if the Winsock registry keys are damaged or corrupted.

  Please follow the troubleshooting methods listed below to check if his help.

  Method 1:

  Winsock corruption can cause connectivity problems. To resolve this issue by using the Network Diagnostics in Windows 7, follow these steps:

  1. Click, and then click network.
  2. Click network and sharing Center.
  3. In the network and sharing Center , click diagnose and repair.

  Note You can also access the network and sharing Center in Control Panel.

  If the problem persists, please follow the next method.

  Method 2:

  To reset Winsock for Windows 7, follow these steps:

  1. Click on , type cmd in the Search box, right-click cmd.exe, click run as administrator, and press continue.
  2. Type netsh winsock reset at the command prompt, and then press ENTER.

     Note If the command is correctly entered, you will receive an error message. Retype the command. When the command is executed successfully, a confirmation is displayed, followed by a new command prompt. Proceed to step 3.

  3. Type exit and press ENTER.

  Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.

• hp officejet pro 8500 a - Wireless Network Setup Error Message premium

  I have my printer connected to my desktop via USB, and print very well. I want to connect the printer to the network wirelessly to other computers can ePrint. However, whenever I want to initaite the wireless configuration wizard, I get the following error message: wireless communication has been disabled. Contact your network administrator or the person who set up the printer.

  @khalidalkalla, please check your private message Inbox.

• PC cable loss of internet connection with router WRT160N V2

  I'm new to routers and I just added a router WRT160N (V2).  Wireless through my laptop is great. However, I have 1 PC connected physically to the router. The internet connection is sporadic on this PC. I have "wireless" internet service high speed and sometimes you click internet or check your emails, and there is no internet connection. It seems to be after the PC has been idle for a while. When you click on the internet icon PC on the router not even flashes her - it's like the PC and the router do not speak. If it does not connect, the connection is great. Any help would be appreciated!

  There is a known problem with intermittent connectivity and firmware to build 11 for the WRT160N V2. 11 is the current firmware on the Linksys site. Check if you have 11 build if your router is a V2.
  Downgraded to build 8 fits usually correct these deficiencies, but Linksys told several people that they do not have firmware version 8 to give end users.

  It's ONLY for the WRT160N V2 router. This firmware will not work on WRT160N V1.

  You can find it at http://audipages.com/router/

  Follow download them and instructions to downgrade firmware on this page.

• Unable to connect to the Internet error message, "(serveur DNS) does not". "

  Original title: connection to the Internet.

  I am really a novice in computer science.   The wifi signal is strong and I'm connected to the internet, but I can not connect or when I do connect it falls to me as soon as it connects.  Where is my problem?   the only statement I received is that the computer is configured correctly, but the device or resource (DNS server) does not.   Can anyone suggest what to do next?

  Hello

  This problem may if the router is not configured correctly or if the TCP/IP settings are incorrect.

  1. What is the brand and model of the computer?

  2. when, exactly, you get this error message?

  I suggest you try the procedure described in the article and see if it helps.

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7
  http://support.Microsoft.com/kb/2779064/en-us

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Trying to install wireless router WRT160N

  Here's my network setup: cable modem adapter VOIP phone to a wired router to 2 desktops

  I plugged the ethernet cable from the modem cable in blue port 1 of the wireless router, plugged the blue cable on port internet and then connected to the WAN port on the VOIP adapter.  Also tried the reverse (ethernet cable to the Internet port, blue cable in port 1 and then to the WAN adapter VOIP port).  Or work of configuration and installation is not complete.

  The configuration above puts the router in front of the VOIP wireless and wired routers.  Should I put the router wirelessly between the VOIP adapter and wired router or maybe AFTER the wired router at the end of the network?

  I thought about it - the VOIP adapter must be first online... so now, my configuration is modem cable---> VOIP adapter--->--->---> computers wired router wireless router

  Thanks for trying to help anyway!

• Connect wireless router by the network to the gateway switch

  I have a wireless router is connected to a network switch that is connected to our gateway to Comcast. Devices connected to the wireless router can access the internet without any problem. However, some workstations connected to the switch receive an ip address in the range of the router (192.168.1.x). They cannot access the internet. Is it still a router problem or is it a problem to switch?

  The only way to devices connected to the switch can Gets an IP address from the server DHCP of ROUTER2 is if you have the LAN of ROUTER2 port connected to the switch instead of the WAN port.

  What router model Linksys do you have?

• Unable to connect video Vimeo. Error message says "mime type or video format is not supported.

  I am using a model with a full-screen video landing page, but I am unable to join Vimeo video to connect. Error message says "type mime or video format is not supported.

  I downloaded successfully on Vimeo however when published in the catalyst and preview the message error "type mime or video format is not supported." appears.

  What is a format problem? I want to emphasize I use a model of Museworld as I am not a designer or graphic artist just an another noob. @

  Hello

  This seems to be an error in Firefox:

  Firefox error: Ms type or video format not supported - articulate the Storyline Discussions - hero of E-Learning

  Please check if you are able to watch the video on Vimeo.

  Also, try using a different browser.

  It will be useful,

  Sonam

• Sidebar gadget / whenever I connect I get an error message indicating that google desktop did not start correctly

  I have a side bar to the right of the office, the problem is, whenever I try to click on an icon on the toolbar at the bottom, a vertical translulent [box, rectangle, border?] appears in the sidebar and the items on the toolbar at the bottom, me disabling click on the items on the toolbar.  Is it possible to resize or remove the [box, rectangle, border?]?

  ALSO, whenever I log in, I get an error message indicating that google desktop did not start correctly.  but I have not found a solution to this problem.  can someone help me?

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Use the Progam below to remove annoying boot for her entry to the problem of Google:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to connect to the Wifi router, no error message 'no Internet connection '.

  Original title: my laptop is not picking up wireless when there is a WiFi connection available. What's wrong?

  He said: "No Internet connections available" even when the router it onand I can get WiFi on other devices.

  Original title: my laptop is not picking up wireless when there is a WiFi connection available. What's wrong?

  He said: "No Internet connections available" even when the router it onand I can get WiFi on other devices.

  Delete networks all memory.

  Uninstall all the drivers for the wireless network.

  Reset.

  Install the latest drivers from support from the manufacturer of the computer's wireless network and the Web site to download drivers for your computer.

  Restart your wifi access point.

  Wireless Setup to connect to your wireless access point.

• Unable to connect to wireless internet with error message: "problem with wireless adapter or access point.

  Original title: I am trying to connect to my WiFi.

  I am trying to connect to my wifi but it keep saying there is a "problem with wireless adapter or access point. I tried the steps that he told me to do but still no help.

  Hello

  Thanks for posting your question in the community of Microsoft Windows. I understand that you are facing problems with your wireless internet connection. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. What is the brand and model of the computer?

  Method 1:

  Follow the steps in the link below.

  Of connection problems in Windows wireless and wired network: http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Follow the steps in the link below.

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 3:

  Follow the steps in the link below.

  How can I troubleshoot network card? :

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• 6 giving "cannot connect to wifi" iPhone error message

  MY iPhone 6 does not connect to my wifi at home. I did the reset network and I know the password is correct, but it keeps giving me this error "Unable to connect to the network" message every time I try. Any suggestions? Thank you!

  Restart your router by unplugging for 30 to 60 seconds, and then try to connect again.

• Wireless router WRT160N cable on the desk, I loose internet when the laptop is turned off.

  I have wrt160n v2 router wireless, it does not work for me.

  If my wireless XP laptop is only powered ON the Vista desktop internet wired connection works, I'm not wired or wireless using laptop computer, not on the internet, only power.

  If the laptop is turned off, I have no internet on the desktop, always connected via the router.

  The laptop is used and I didn't know if the without built-in thread was pretty new, so I bought a card to go in wireless.

  When everything is on everything is to play on the internet times two computers, but if you turn off the laptop I have to connect internet directly on the Office to continue in the internet.

  I started working with a tech support yesterday and they are difficult to understand. I had put in the new firmware and the problems persist.

  Can someone help me, I don't really have time to be on the phone for hours figure this all out.

  Thank you

  Jackie

  go to http://audipages.com/router/ and follow the instructions