Connection at the vRO 7.0.1 device with Jenkins LTS worm. 1.609.1

Similar Questions

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• Microsoft Office 2007 (Word, Excel, Outlook) slow when connected to the network, but fast when not. with windwos vista

  Microsoft Office (Word, Excel, Outlook) and printer slow when connected to the network, but quickly when not. with windwos vista, I have reintall the operating system, but still the same. Environment Network (Win server)

  Hello

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in Windows Vista IT Pro Technet Forums network.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro/

  I hope this helps.

• I upgraded from Dreamweaver CS4 to CS6. but now "a Technical error occurred - cannot connect to the host. I spent hours with the technician of the host and we can't find the error. I reinstalled DW4 and it connects to accommodate perfectly. Anyone else se

  I upgraded from Dreamweaver CS4 to CS6. but now when I want to download, I "MFP error - cannot establish a connection to the host. I spent hours with the technician of the host and we can't find the error. I reinstalled DW4 and it connects to accommodate perfectly. Anyone else seen this problem?

  Mac OS 10.8.5

  
  None of these issues are causing the error in DW CS6. We double-checked all of them and we did everything right. Also I have exactly the same SiteSetup in DW CS4 and that works perfectly well. Might need to factor 6 which did not exist in the 4? Something that is not in the SiteSetup but in a hidden dialog box?

  I can also download my host using Fetch, a third party FTP. And like I said that DW CS4 works very well. So the problem is not with my host, sound with DW CS6 in particular.

  You are most likely missing something fairly simple (some goofy box cache you in some menus random). The best way to solve this problem, without playing 20 questions...

  1 open the site in DWCS4 and go to Site > Manage Sites > export to create a your site settings .ste file.

  2. close DWCS4 and open DWCS6

  3. go to the Site > Manage Sites > Import to import the .ste file to create a new site at DWCS6

  This will create an exact copy of your CS4 settings in CS6. If it still does not work, let know us and someone should have another idea for you.

• My mobile mouse 3000 does not work even with new battery, no green light on USB, when connect to the system, it says unknow device USB

  the system says: one of the USB connected to the computer with multifunctioned, and windows does not recognize it.

  Hello

  · What is you receive the exact error message?

  Follow the steps in the links below and check if this can help: Troubleshoot failures in the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Troubleshoot the failure to find new mouse connected to your USB port: http://support.microsoft.com/kb/223256

• Cannot view or connect to the Wifi network of 5 GHz with Time Capsule from Apple 5th generation

  I have a new Apple Time Capsule 2 TB with 802.11ac network support. I have setup my base station in order to disseminate the 2.4 GHz and 5 GHz network SSID. I have 2 apple (iPad Mini and Macbook Pro) time devices can see and connect to Terminal 5 GHz network however I have also a Lenovo Vibe P1 phone (dual band wifi supported) and Samsung Galaxy Tab S compressed (dual band wifi supported) and these devices cannot see or connect to the network of 5 GHz of Base Station. I also have a Cisco router that has a dual-band support and all my devices can see and connect to the network of 5 GHz of this router.  So I wonder why I have this problem with time capsule?

  I have reset my base twice station and it is a new device purchased last month.

  Any help or suggestion is appreciated.

  Did you use the SMB compatible names for everything...?

  That is to say the alphanumeric short, without spaces and Pure...

  for example base station name... TCgen5

  name TCwifi wireless

  Have you also used the password corresponding to these requirements... but can be between 8 and 20 characters.

  If so, then you must give a different name to 5 GHz and delete the password and test... If it's not yet connect the test manually on channels 36, 44, and 149 for example if you are in the USA...

• iPhone 5 s to connect with blue tooth in the car for hands-free calling does not connect to the speaker, it works very well with the iPhone 5. How to solve this problem?

  IPhone 5 IOS 9.2 (13 c 75) I can log in my car with Blue Tooth to make phone calls, but it does not connect to the speaker. To establish the connection with the car, the procedure has been completed correctly. With the iPhone 5 it works perfectly correct.

  How to solve this problem? Is there someone who has the same problem?

  Howdy,

  Thank you for using communities Support from Apple.

  I see you try to get your iPhone to interface with the stereo in your car via Bluetooth.  For setting this up, please follow the steps below.

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Help to connect your iPhone, iPad or iPod touch with your car radio

  See you soon.

• PC can connect to the printer, but Mac cannot even with updated drivers.

  We have an HP Photosmart Premium C309g, which is connected to a Cisco Linksys EA2700 wireless router. The printer connects easily to the PC with windows 7. However on macs with Lion, the printer will be displayed when you type the IP address in the browser. However when you try to load the printer it does not appear. If you use the IP address to load it does not connect to the printer. He used to work. The only changes are a new PC and a new wireless router. I tried to update the drivers and software on the Mac. It did not help. Still the same problem.

  Hello

  Unlike Windows, peripheral Apple uses Hello (which is based on the multicast) to connect with the HP device over the wireless network.

  As far as I'm aware routers Linksys not configured for multicast by its default value.

  Try the following and check to see if that can help you:

  1. Enter the router from your browser homepage.
  2. Enter in the Security tab,
  3. Check filter multicast.
  4. CLCK save changes.
  5. Reboot the router and check any change.

  Kind regards

  Shlomi

• Debug the application Air iOS on device with Flash CS6?

  Hello

  Is it possible to debug an iOS to Air on the device application to get all messages from trace()?

  I use Flash CS6 with the AIR SDK 16.

  Thank you

  Go into settings of publication:

  

  -Select the fast publication for the debugging device and select your WIRELESS LAN adapter IP list

  -Install IPA on your device
  -In Flash CS6, go to debug panel-> begin Remote Debug Session > ActionScript 3.0

  You will see:

  Waiting for player to connect...

  in the Panel output

  Now launch your application on your device. Do not forget that you in the same WiFi network with your desktop computer. If Flash CS6 impossible to connect to the device and still wait - try to disable the firewall.

• Connection to the machine to ESX4 Wizard fails with "connection refused".

  Environment: ESX 4 server, hosting VMware Studio 2.0 (final version), will deploy device created in the same ESX host.

  -

  ---

  In my profile generation, generation settings section, I chose VMware ESX/ESXi 4.x and entered the Connection Wizard...

  Host, Port, user, password fields are filled.

  Connection test fails with the following message is displayed:

  Failed: error connecting to the server " " https://x.x.x.x:443/sdk/vimService ': connection refused

  My initial inspection is that it is probably caused by the server proxy/ISA on our network. It is know to cause some problems with https connections and some browsers. I am not sure that it is the first cause, but this is my first guess.* *.

  There are balls that can confirm?

  Is it possible to force a non-secure http connection?

  No, it's not a way to connect by using http.

  Try the following:

  stop /etc/init.d/VAMI-SFCB

  http_proxy = / opt/vmware/sbin/vami-sfcbdhttp://your_proxy:proxy_port;

  Now, try the user interface.

  Vishwas

• How to connect to _old_ Sync one and only device with the new operating system

  Howdy,

  I own a "device" (laptop) and have used Sync to store my bookmarks and passwords online as a way of not having to worry about backups for these courses of frequent relocations due to the OS-experiences etc.

  Yesterday, my HARD drive crashed hard, so I set up another and a new OS installed (Qubes R2).

  Now costs 32 FireFox that accompanies the installation won't let me not reconnect to my old data synchronization.

  No other devices available (or systems USB - life) with recently synchronized data locally.

  It seems to me strange _VERY_ that due to certain policies to force people to start using an account of FireFox, I must now be deprived of my current Favorites and passwords, even if I _DO_ toxic Apple bite and create an account.

  WTF is the logic here?

  See you soon,.
  Pudsy

  The 'logic' is that Sync has always intended to be used to synchronize several installations of Firefox, never to be used as a 'backup service' as you did. Plus the fact that the transition to the new version of sync with Firefox accounts, started 5 months ago (for users of the Release - version and about a year for pre-release nightly testers).

  You can try to install a version of Firefox 28 [or an earlier version] of Firefox and see if you can connect to synchronize to recover your data.

  I do you, you can upgrade to Firefox 32 and then update your sync account.
  Synchronize your bookmarks Firefox, history, passwords, etc.

• Connect to the printer error code 'Operation failed with error 0x00000002 ".

  I'm unable to connect my network printers

  Hello

  We will try this solution I found in another thread.

  1. Click on the Windows key + R, type services.msc and press ENTER.
  2. Scroll down to "Print Spooler" and then right-click and select Properties.
  3. Make sure that the startup type is automatic, then click on stop and then start it.

  Thank you

  Legaede

• My HP 5510 is connected to the wireless network, but cannot communicate with the printer?

  I connect a HP all in one Photosmart 5510 to an ATT Uverse wireless network. It says printer is connected and printer tests are all good.., but still when I try to print, I get an error message saying that cannot communicate with the printer, make sure that it is attached to the network?

  I restarted services, restarted..., still the same case. It says its connected, but do not connect or print. Very frustrating...

  What operating system?

  If Windows, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

• I am using windows 7 and my computer laptop wifi does not connect to the modem. It worked correctly with the other modems. I had the prob with the new modem provided by optus. can someone help me please?

  my computer laptop wifi works with other modems. and my modem works with other laptops. they have one problem with each other.

  I don't know why, please help me...

  Hello Omar.

  Thank you for keeping us posted.

  It seems that you did not try the method 2 and 3 after running the troubleshooter from network. Please, try it both ways and see if that solves the problem.

  Reply with the results. We will be happy to help you.

• Unable to connect to the device RS-232 USB to the Windows XP client adapter

  My configuration:

  VM Player version 6.0.7 build-2844087

  Windows 7 64 bit host

  Comments Windows XP 32-bit

  USB Serial Port of MOXA cover 1110

  Latest drivers installed for MOXA to the host and guest

  VMware settings for USB controller is: USB USB 2.0 compatibility

  Drive shows the MOXA cover 1110 removable device, non-connected status. When you try to "Connect (disconnect from the host)" gives the error message: "the connection of the USB MOXA cover 1110 device failed. Driver error".»

  Can give you some ideas what to do please?

  Solved. The reason: USB 3.0 controller is not connected, but through a port USB port 2.0 controller works.