Connection Ethernet Port speed test

Similar Questions

• How to extract all the drives SAS/SATA and Ethernet port speed of the link command line?

  Hello

  Do you know if supports Windows OS built in order to extract all the SAS/SATA drives and ports Ethernet link speed?

  i.e. for SATA3 drive it show 6 Gbps, for DIS3 drive it will show 12 Gbps, to present the current link speed.

  i.e. for Ethernet 10 G, it will show 10 Gbit/s while the current connection speed is at 10 Gbps.

  I need the command to create a batch file to run bike test to check all connection speeds are correct in each cycle the system power runs, if the Windows operating system does not support built in order to achieve this, please send us any tool of 3rd - party with the support of the command line to do this.

  Thanks in advance.

  Jacky

  Hello

  This is a forum for Windows and you can't find the experts here, so your question will better suit in the TechNet forum where members of the community who have the expertise to help you. Check out the link and post your query:

  https://social.technet.Microsoft.com/forums/en-us/f4a3a72b-21e4-45fc-b623-eb1d99215c79/command-prompt-and-bat-files?Forum=w7itprogeneral

• Using the second ethernet port to connect to the printer?

  Hi I have a Mac Pro 2.1 old school and I'm wondering if I can connect to the network with an ethernet port and connect the latter to a printer?

  If so, how?

  Yosemite running.

  Thank you

  Physically, you use a port and a cable to connect to your network and use the second port and a second cable to connect directly to the printer. The printer must obviously have an interface Ethernet himself.

  However, you need to configure the second port on the Mac and the Ethernet port on the printer for each manually configured the TCP/IP addresses and these should be in a range of different network to your main network.

  If you the main network is something like 192.168.1.1 then your printer and the port on the Mac connection to this need to be in another network, such as 192.168.11.1.

  In theory, if the printer supports Hello aka. mDNS, then maybe you can get away with not having to configure TCP/IP addresses for the connection.

  The main reasons to use a second separate connection as this would be the performance or security, and frankly I don't think that's really relevant here. This would mean that no other computers on your network will be able to access the printer.

• Ethernet port on iMac 2013 does not connect

  iMac 2013 WiFi works, but slow (25 to 40 Mbps off potential 250 + Mbps. Somedays as fast as 179 Mbps wifi, but not lately) router misplacement slows me down and very hard to change the location of the router. Ethernet cable is good. Cable used to work with the iMac, but now it does not work. Not sure if hardware problem, or if the updates of the AOS has caused. Same cable works always with older macBook and iMac. 270 Mbps with the cable connected to the MacBook. A detailed visual inspection of the port does not bent pins. New looks.  Ports of the router has changed. Changing cables. Reset the router. You wonder if El Capitan or other updates might close port? How to re-enable?

  OS X El Capitan to 10.11.5

  iMac 21, 5 - uh 213

  Processor Intel Core i5 at 2.7 GHz

  8 GB 1600 MHz DDR3

  Broadcom 57766-A1:

  Name: ethernet

  Type: Ethernet Controller

  Bus: PCI

  Vendor ID: 0x14e4

  Device ID: 0 x 1686

  Subsystem Vendor ID: 0x14e4

  Subsystem ID: 0 x 1686

  Revision ID: 0x0001

  Width of the link: x 1

  BSD name: en0

  Kext name: AppleBCM5701Ethernet.kext

  Firmware version: 57766a - v1.13, 0x010e63c4

  Location: /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleBCM570 1Ethernet.kext

  mDNS capable unloading: 68:5 b: 35:7e:f8: ff

  Version: 10.2.0

  In addition, Apple Support recognizes that they broke the Ethernet Ports and suggest that if we:

  "Kernel Extension Configuration Data incompatible Version 3.28.1" we can fix it by going to the command line entries.  However, this version is not on my computer. I have 3.28.2 since 29/02/16 and articles 3.30.1 06/04/16 and 17/04/16.

  They say on the following link:

  If the Ethernet on your Mac has stopped working recently - Apple supports

  If you can connect to Wi - Fi, follow these steps to update to version 3.28.2

  1. Open the activity monitor, located in the Utilities folder of the Applications folder.
  2. Select the CPU tab in the activity monitor, and then type "up-to-date" in the search field. The process of softwareupdated should now be the only listed element.
  3. Open the Terminal application, which is also in your Utilities folder.
  4. Enter this command in a Terminal to upgrade to the current version of the extension of the "Incompatible Kernel Extension Configuration Data" kernel:

     sudo softwareupdate --background

  5. Enter the admin of your OS X user account password when prompted.
  6. Switch to the activity monitor. When using the processor (CPU %) of the process softwareupdated is reset, the extension of the core must be updated.
  7. Select restart in the Apple menu to reboot your Mac.

  I prefer not to do that since I could break it's worse and I 3.28.2 and beyond.

• He is an icon in the upper right corner on your internet connection speed test. is this malware

  He is an icon in the upper right corner on your internet connection speed test. is this malware

  You can attach a screenshot?

  • http://en.Wikipedia.org/wiki/screenshot
  • https://support.Mozilla.org/KB/how-do-i-create-screenshot-my-problem

  Use a type of compressed as PNG or JPG image to save the screenshot.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• How to extend the network and using the Ethernet port to connect an older computer without wifi capability

  I have a wireless network with my Time Capsule, but also I have an old computer without wifi capability. Is it possible to share the connection to this computer that connects an airport express (model A1264) to extend it and the computer thought that the ethernet port on the Airport express?

  Thank you.

  Yes

• my macbook pro 2015 lacks an ethernet port. How can I connect using ehternet?

  My macbook pro doesn't have an ethernet port. How can I connect my wifi is spotty, but the wire is good? Thank you!

  You will need an Ethernet to USB connection

  http://www.Apple.com/shop/product/MC704LL/A/Apple-USB-Ethernet-adapter

• is my function of co-dependency on my removed switched phone modem.no lights on the port, ethernet port net connect.

  Thank you ~ RELLIK ~ for your help check modem switched on the lights. DSL, sr100g.problem now extends to my ethernet port lights not on.some time ago I removed my mod.which of internal phone has been used for DIALUP.it prevented my lap.from start after dell logo splash screen.so I used an external modem QUESTION.IS MY PORT AND LIGHTS CO-DEPENDENCY ON MY OFF DIAL UP TV TELEPHONE MODEM ETHERNET?

  You should stick to a thread, or at least to copy texts from that earlier instead of making people to drive to the top of your thread earlier.

  It would also help greatly if you have formatted your messages using sentences and paragraphs.  It is very difficult to read this single run-on sentence:

  Thank you ~ rellik ~ I got the my dsl phone co.check, sr100g, and on.problem lights came now extends to my lap.port lights don't turn only not on.so here we go again! I will try to clean the pins, eight of them and see, then if it doesn't maybe goinside to check connections. HOWEVER! I ' M A LITTLE MISTIFIED ON ANOTHER TOPIC! I had a phone internal modem.actiontec.mp100mdf2.this to that I used. DIALUP INTERNET.discouvered the modem stopped lapt.from turning on.after dell logo splash screen.desided to disassemble and clean took out and decided, out of curiosity, to turn on the system and it came, I reversed and reconnect, modem usb external bad.bought, worked, BUT very good! COULD YOU ME TELL IF MY ETHERNET CONNECTION IS CODEPENDENT ON MY PHONE DELETED. MODEM? kentempo.

  or, in this case, this one:

  Thank you ~ RELLIK ~ for your help check modem switched on the lights. DSL, sr100g.problem now extends to my ethernet port lights not on.some time ago I removed my mod.which of internal phone has been used for DIALUP.it prevented my lap.from start after dell logo splash screen.so I used an external modem QUESTION.IS MY PORT AND LIGHTS CO-DEPENDENCY ON MY OFF DIAL UP TV TELEPHONE MODEM ETHERNET?

  To answer your question of capital letters: no, the behavior of your Ethernet card, including its lights, has nothing to do with your telephone modems, current or previous.

  • Open the Device Manager (start > run > devmgmt.msc > OK)
  • Click on the + to the left of network adapters to expand the category.
  • What devices are displayed?
  • Y at - it a warning next to your network adapter icon?  If so, double-click on and to report to what appears under the "device status".
  • Close the Device Manager and open the network connections (start > run > ncpa.cpl > OK)
  • You have an icon for "Local Area Connection"?
  • What is written on the line under the title "Local Area Connection"?
  • Right-click on the icon and select Properties
  • In the 'Général' tab there is a window titled "this connection uses the following items" - report anything that is listed in this window.

• My ethernet port is not working and I need another way to connect to my desktop to the modem

  My ethernet port was released at some point on my Compaq Presario and my old modem, I connected to the internet via a usb port. However, I had to replace the modem and now there is no usb port. I'm going to replace my router anyway, but I don't know what to do! Help!

  Your motherboard specifications are HERE you have 3 PCI slots for add-on cards. Probably a modem in one of them now, which can be removed or left. Always have 2 empty slots. Right PCI network card plugged into the slot and comes with a cd of drivers.

• Use the ethernet port to connect a pc

  Hello

  I intend to use my raspberry pi to do some projects, but is not close to the router (needs thought Ethernet connection - and before anyone asks I'm not able to use a wifi dongle to connect because of the requirements of the project size wise), but near my officejet 6700, can I use the Ethernet port on the printer to connect my raspberry pi to the network from that the printer is connected. I have to play with settings?

  Can anyone help

  Thanks in advance

  Martin

  No you can not use the Ethernet port on the printer.  It is only to connect the printer to a wired network.

• How can I configure two ethernet ports to connect to a VPN with Windows Server 2008?

  Something I can put in place, but im stuck with an error that I get is that I need two ethernet ports to configure vpn but why and how do I make it work I like

  original title: vpn windows Server2008

  In order to configure the VPN, you can take a look at:

  http://TechNet.Microsoft.com/en-us/library/cc725734 (WS.10) .aspx

• Why is my slower than wifi ethernet download speed when using the airport extreme?

  Hi all

  This is my first post here, so please bear with me. I currently own stunted 2011 Macbook Pro 13 inch and an extreme A1521 from the airport. My ISP has promised 50Mbps downloading and sending 10 Mbps. When I connect my MPro via ethernet/wi-fi to my modem I get as promised. When I connect my MPro via wi - fi to the extreme I get 48Mbps download download 9Mbps and it's ok. However, when I connect my MPro via ethernet to extreme I get 8-9Mbps download and 9Mbps. Anyone know how to fix this?

  If you check the 'fine print', your ISP has promised "up to" 50 Mbit/s and 'up to' 10Mbps.  The ISP might provide more than that during periods of slow activity, like the days of the week during the day, but much less during evenings when there are many more users on the Internet.

  When I connect my MPro via ethernet/wi-fi to my modem I get as promised

  I assume that you meant to check the Ethernet connection, you disable WiFi on Mac when you do this. And unplug the Ethernet cable when you check the speed of the WiFi, correct?

  If so, this tells you that the Ethernet port to both the modem and the Mac work properly, and WiFi work correctly as well.

  When I connect my MPro via wi - fi to the extreme I get 48Mbps download download 9Mbps and it's ok.

  If this tells you that the Ethernet connection between the modem and the AirPort Extreme works correctly, and wireless works fine on the AirPort Extreme.

  However, when I connect my MPro via ethernet to extreme I get 8-9Mbps download and 9Mbps.

  Well, you know that the Ethernet connection between the modem and AirPort Extreme works because you can register 48 Mbps Wireless.

  Thus, the possibilities are narrowed to two elements at this stage:

  (1) the Ethernet cable is defective or making intermittent contact. Try another Ethernet cable, to ensure.

  (2) If you have turned off AirPort Extreme and rebooted several times, and you know that the cable between the Mac and AirPort Extreme works properly, then you have reduced the question down to the Ethernet on the AirPort Extreme, which is probably defective switch.

  If you have not already done so, try other ports Ethernet on the AirPort Extreme.

  As a last resort, perform a reset material on AirPort Extreme and put up again. To perform the Hard Reset... power on AirPort Extreme for a few minutes, then hold it pushed in the reset button on the back of the unit (near the AC power plug) for 7-8 seconds and release. Allow a minute for the AirPort Extreme restart orange light flashing slow.

  I once went through two consecutive airport extremes with the same question about 8 months ago, so it can happen.

  If you're still having problems, then it is time to take the AirPort Extreme of Apple Store... If you have one near you... or contact the Apple Support directly by clicking on 'Contact the Support' in the upper right area of this web page.

  Good luck!

• Ethernet port disappears

  I'm on a MacBook Pro, end of 2013, El Capitan 10.11.3 running.

  Just today, I went to run a test using my Ethernet card rather than my wireless adapter and I couldn't connect.  I spent more than an hour to get to the next State:

  1. The operating system cannot see the Ethernet port.  If I run the system information report the Ethernet port is not listed.  Initially, I got the Ethernet port defined in my automatic position.  When I opened and went to advanced-> Hardware, I couldn't see my mac address and the configuration was virtually empty.
  2. After that a lot of research I restarted with the ethernet cable is connected and press command + r.  When the diagnosis came, I select Network Diagnostics.  There, I could see my card Ethernet, the mac address and the assigned IP address.  I disconnected the cable and saw the idle connection.  I reconnected it the cable and the returned connection active.
  3. I tried to reset the NVRAM using the Option + command + r + p, but without success.

  It is clear that the hardware is functional.

  How to restore the connection in the operating system?  I tried to add manually the ethernet card, but because the operating system does not see the adapter is not available to add manually to the location.

  I need help solving this problem.

  Hi George:

  Found this information. See if she can relate to you. http://9to5Mac.com/2016/02/28/Apple-confirms-OS-x-update-broke-Ethernet-port-on-some-Macs-heres-how-to-fix/

  Kim

• The bridge network to the ethernet ports

  I have an Airport Extreme base station for my wireless at home. The problem I have is that the base station is not near a few features, that I need to hard wire. I read that you can set up a network bridge and if I understand correctly, this concept, it's like setting up of another wireless device, but this second device provides you with the required Ethernet ports for connectivity. Is it possible to do with the Airport Express secondary device?

  Most of the other posts that I read said to extend the wireless range, but the range of my base station is not the issue. I just need a couple on the way ports. I've heard this can slow down the entire network however. Is this feasible? All known reserves? Advice is appreciated.

  Is it possible to do with the Airport Express secondary device?

  Yes

  Most of the other posts that I read said to extend the wireless range, but the range of my base station is not the issue. I just need a couple on the way ports. I've heard this can slow down the entire network but

  It all depends on if you configure the AirPort Express to "extend" the network... which will lower the maximum speed potential of the network by all 40-50%...or...whether that you set up the base AirPort Express for simply to 'join' the network... which causes a decrease in the speed of the network... but it will provide 2-port Ethernet for wired devices.

  If you need more than 2 ports Ethernet on the Express, you can add an Ethernet 5 port, 8-port switch, etc., to create as many ports as you need.

  Don't know what kind of speed you need for the Ethernet ports, but they are limited to 100 Mbps, then that would be the maximum speed available ports Ethernet on the Express.

• UDP communication via secondary ethernet port on the cRIO-9074 problem.

  Hi guys.

  I connected my host pc running LV 2010 my cRIO-9074 port using a main ethernet crossover cable. I want to use the second port ethernet on the cRIO-9074 to read UDP messages, and I want to access these messages on my host. UDP messages are sent from a local network, but for testing I also use a second pc running LV 2010 to send UDP messages.

  I configured the ethernet on the cRIO-9074 ports according to this tutorial: "knowledge base 4E0DGASK: Configure the Ports of double Ethernet on real-time controllers'." " My host and primary ethernet port belong to 'Subnet A' while the second port and the second computer, sending UDP messages belong to 'Subnet B' (at the end of my post I will list the masks of ip addresses and the subnet).

  For simplicity, I used the VI´s of this example as a basis for UDP communication. The "UDPServerOnRemoteTarget.vi", which broadcast messages UDP, will run on the secondary computer. The "UDPClientOnRemoteTarget.vi", which reads messages UDP, will work on my host pc.

  Now, in the 'UDPServerOnRemoteTarget' VI, you must specify two IP addresses (port # remained unchanged at 3363):

  1: the IP address of the ethernet port that will be broadcast UDP messages.

  2: the IP address of the ethernet port that will receive the messages.

  In the #1 case I put the IP address to the IP address of the ethernet on the secondary pc port.

  At the #2 I tried to set the intellectual property: a) IP address of the secondary ethernet port on the cRIO, b) IP address of the ethernet on my host computer port and c) IP address of the primary ethernet port on the cRIO.

  None of the parameters produced results. I also tried to change the port number, which did not help.

  However, if I bypass the cRIO and connect the host pc and the secondary computer directly (by using a cable crossed a regular cat5 ethernet cable), I am able to send and receive UDP messages (the two stand-alone always are on different subnets). I guess that this at least excludes any fault in the VI´s code.

  Does anyone know what I'm doing wrong here? Is it possible at all to read the UDP messages that are sent to the secondary ethernet port on the cRIO my host pc?

  I have searched the entire site OR and forums, but didn't come through all that solved my problem. Most of the other tutorials configuration resembling my case is to import the device sends UDP messages in the project, but which is clearly not possible in my case, or is it?

  My IP settings are:

  cRIO 9074:

  Primary ethernet port: 169.254.62.215

  Secondary ethernet port: 192.168.0.102 (static)

  Host PC: 169.254.58.4

  Secondary PC: 192.168.0.144 (static)

  SubnetMask on all ports are the value 255.255.0.0

  I hope someone out there can help me out.

  Kind regards

  Phat

  Solved.

  Stupid mistake. I was running the VI on the host instead of the cRIO pc, which explains why direct communication between the computers worked. Everything works well when it is compiled for the cRIO.

  Kind regards

  Phat