connection initialization failed

Similar Questions

• Serial connection initialization failed, the selected port to COM8 is not available at this time. HotSync Manager will open the port when it becomes available.

  I use the Vista operating system, have a Palm 755 p smartphone and a computer portable 64-bit Dell.  I understand that Palm decided that they would not develop drivers for 64-bit, so I can't sync via USB to my computer and had to set up sync via Bluetooth.  (Seems easy, but since no one knew that this was the problem, it caused hours of phone/chat sessions.  But Palm is eager to accept money for the product for which they provide limited support).  In any case, I get the error message that is expressed in the question of the title / at least three times every time I refresh or starting a computer.  Do you know how I can eliminate this and retain the ability to sync the Palm to the computer?  It's as if synchronization manager thinks I'm syncing with usb and shows it not available because it is not configured to do so through that connection.  "Don't know - I would just like to safely eliminate this error message - and it would be a bonus if Palm would be their product and provide both drivers, but its doubtful."

  Hello

  (A) you must use the process of elimination and to discover the processes which create errors. So, put the computer to boot to verify that. Follow the steps in the link below to perform the clean boot. http://support.Microsoft.com/kb/929135
  Note: Please make sure that the computer is configured to start as usual by following step 7 of article http://support.microsoft.com/kb/929135 .

  See also the link below
  (i) http://forums.palm.com/palm/board/crawl_message?board.id=bluetooth_and_wifi&message.id=15712

  (II) http://forums.palm.com/palm/board/crawl_message?board.id=windows_hotsync&message.id=29572

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Impossible to mount the persistent drive - trying to deploy the first pool of offices and do not. -View composer agent initialization failed

  Hi all

  Complete errors:

  Discover the State of the agent (22) composer initialization error: cannot mount the persistent drive. Please check the VM parent if an existing drive uses the same drive letter. (expected 0 seconds)

  State matching: matching...

  By:xxx.xxx.xxx.local set up

  Attempted theft by:

  Error commissioning took place for Machine xxx: View Composer agent initialization failed

  I am currently deployment of VMWare view for the first time in a test environment and have hit a problem I have not been able to get around despite several searches on google and trial and error.

  Hoping that someone here could suggest something.

  View the VMWare versions are all 6.0.1.

  vCenter is on a device.

  VMWare view connection manager is on a 2012 R2 VM server.

  VMWare view dial is on a separate server 2012 R2 VM.

  I have a 2012 SQL on a separate server 2012 R2 VM Server installation.

  SQL databases have been set up for the composer to be able to reach it, it uses ODBC 64-bit via SQL Server Native Client 11.0.

  I tried troubleshooting by exchanging 32-bit, but this is not connected, it seems so 64 bit is correct.

  I have a windows 7 64-bit Enterprise Edition VM under my Golden image. There are VMWare tools on it and the VMWare agent on it.

  The virtual ipconfig/release performed top machine, he was then stop and a snapshot taken as my source.

  The problem is that when I go to deploy a pool of offices, I get the above error.

  If I connect to the VM created via vCenter readers persistent and temporary show very well.

  Based on the error, I tried different settings such as change the path for the reader of DVD VMs of D: to Z:, spread unique persistence and the temporary disks on multiple data-stores or data stores and even remove the drive of DVD of VMs completely. I have also looked at newspapers under composer view but find nothing to explain the behavior.

  SQL Server seems to work for configuration through the error logs and virtual machines are created and added to AD as expected.

  I must point out that the virtual machines are as linked clones.

  Can anyone offer a clue as to the cause or something, I can check it please, did everything I can think and Googling the error does not come to the top with something useful so far.

  Thank you

  IF you use an Agent 6.0.2 Please downgrade 6.0.1 agent and let me know the results

• Cannot install After Effects CS6 for Mac running Yosemite 10.10.3. Tried to run the update, does not. Tried the update of the application Manager initialization failed. Referred to as Support Advisor, abandoned.

  Cannot install After Effects CS6 for Mac running Yosemite 10.10.3. Tried to run the update, does not. Tried the update of the application Manager initialization failed. Referred to as Support Advisor, abandoned.

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• Essbase start-up, the system of survey error "CSS initialization fails.

  Hello
  I have been using the hyperion essbase in the past.
  Today, somebody removed the network cable on the servers. I put back them, but since then I am facing problem where I can't connect to the Essbase server.
  I tried to restart the essbase server. When the server starts, it first gives the warning:
  log4j: WARN no appenders could be found for logger (com.hyperion.css.common.CSSLo
  landing market).
  log4j: WARN Please initialize log4j correctly system.
  
  But he continues, and then prompt error
  
  [Fri Mar 18 17:06:02 2011] Local/ESSBASE0 / / / Error (1051429)
  Check Existence of Essbase product fails against the server of Shared Services with Er
  MMR [unable to connect to Shared Services, make sure that the Server Shared Services]
  is running and try again.]
  
  Fatal error: CSS initialization fails
  
  I checked the service of Shared Services, and it works well. My environment is a distributed environment, where shared (foundation) services are installed on a different machine than the Essbase Server
  
  Someone could also the problem... Please help

  Are you really sure that you can connect to shared services, if the service is in place it does not always mean that hss is fully executed, for example, there could be a problem in communicating with the relational repository.
  You should also have a look at SharedServices_Security_Client.log

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• "Connection server failed" constantly popping up on sites popular randomly and unable to use FF on Linux Mint 17.1

  As above, websites at random and many of those that I use, say "Connection server failed" and then I can't even go to the Web site. I use FF 35.01 on Linux Mint 17.1. This has never happened before... Pages work fine on another device or Chrome!

  I found my problem!

  I checked the link you gave me, but none of the error messages that are matched. So, I googled the error message, and he apparently had to do with the date of my computer. The date was one day! And what to do with some https sites... Here is how I fixed / solved my problem:
  http://www.genuinescope.com/blog/sec_error_ocsp_future_response/

  But thanks for helping me narrow my problem!

• I get a 'Secure connection' error failed with google stating "certificate contains the same serial number.

  When I click on a link to a google search, I get the "Secure connection" error failed in Firefox. He says, "please contact the administrator of the server or email correspondent and give them the following information: your certificate contains the same serial number for another certificate issued by the certification authority."

  I followed the instructions here:
  https://support.Mozilla.org/en-us/KB/certificate%20contains%20The%20Same%20serial%20number%20As%20another%20certificate
  and looked at this article:
  https://support.Mozilla.org/en-us/questions/1028103?ESAB=a & As = AAQ

  I uninstalled and reinstalled Firefox, deleted the entire folder profiles and reset Firefox. I see that the older (orphans) article points to my router. However, I have a new router and have updated their software. There is no button to add an exception (as stated in the article), so I can't just work around it. This problem does not occur with IE, so I have a hard time to believe that it is my router.

  How to solve this problem? I really want to change browser.

  Finally, I tracked the issue. The answer was found here:
  https://support.Mozilla.org/en-us/questions/1028985

  It turns out that Avast has a web shield that passes through its own verification of certificate https. Of course, this feature is not quite right and loses track of the certificates. Disable "https scanning" in the settings of Avast resolved the problem.

• shock wave. This application requires Xtra (text), which either do not exist or initialization failed, make sure that appropriate Xtras are in the Xtras folder

  Shockwave for Director 12.1.1.151 does not start, just with that. This application requires Xtra (text), which either do not exist or initialization failed, make sure that appropriate Xtras are in the Xtras folder. Reinstalled but made no difference. If you can help would be grateful. Thank you.

  I restored my computer to an earlier version, installed latest version of firefox and the Shockwave for Director, everything is fine now. Thanks for your help guigs2.

• Satellite C650-1CR - webcam initialization failed

  Hi all

  I can't have the built-in webcam to start.
  I downloaded and installed the latest version of bios and drivers webcam on toshiba website which invited cam to start to initialize.

  Now I have an error that says 'webcam initialization failed, please check your device... ". »

  The problem is that there is no registration for the webcam on the screen of the Device Manager.
  I am at a loss how do I get the webcam to work, any suggestions?

  Billy

  > The problem is that there is no registration for the webcam on the screen of the Device Manager.
  Usually the webcam must be listed in the device under imaging devices Manager
  In my case it USB video peripheral s it is the Chicony usb webcam.

  You have marked unknown devices with yellow exclamation?
  If Yes, then this is probably the cam

  As a last option, you can try to recover the laptop using the Toshiba Recovery disk that you have created... If all goes well...

• Engine initialization failed

  I'm under explore 7 and every so often when opeing a third or fourth screen I get an error message in menu bar 'engine initialization failed' page I'm on and then flashes and it is difficult to navigate the page. Any ideas on how to fix this

  What version of Internet Explorer you are using? Is this the last an IE9?
  If this isn't the case, update IE to the latest version available.

• Satellite L750, webcam integrated - application - initialization failed

  I recently got a new Satellite L750 laptop with built in webcam as a gift by my parents, who live in the United Kingdom, so I can stay in touch with them to the Ireland. We had hoped to call each other via video calls, but I can't get the webcam in the laptop for work. I click on camera app Web displays a message saying "Web Camera Application initialization failed; Restart the computer or web camera. »

  I have tried to download the driver from the web camera on the toshiba site and have updated the BIOS, but it made no difference.

  What can I do to get it working?

  I assume that you want to use Skype or some other messenger, right?
  For this application, you must not start application pre-installed Webcam. You can even disable the start-up.

  Can you please check if cam is recognized and listed correctly in the Device Manager and check if some messenger recognizes cam.

  Please post comments and we can continue this discussion.

• Satellite Pro 490 CDT: THE BSOD VFAT DEVICE INITIALIZATION FAILED

  Hello...

  . Heres a beauty for you... I hope someone can help... here go us.

  Loan of laptop to grandson... came back... lots of files were missing.
  Managed to get the BIOS with ESC and F1... and got m/c start CD player. with W98 drive in

  ScanDisk fixed a lot, a lot of probs... then to start to reinstall W98.

  Stupid me thought that I wonder if he will now start without having to reinstall windows.

  Turned on / turned off... now I'm stuck.

  Immediately get the bluescreen...

  * VFAT DEVICE INITIALIZATION FAILED.*

  * A DEVICE OR RESOURCE REQD. BY VFAT IS NOT PRESENT OR IS NOT AVAILABLE. VFAT CANNOT CONTINUE TO LOADING.*

  * HALTED.* SYSTEM

  Computer portable primer not cd player where the BIOS has been the last value.
  Can I not access the Bios with ESC and F1 like last time.
  It doesn't matter what I do... I can't get this screen or boot in the bios.

  I hear the cd drive spin upward with the W98 CD in but still the same blue screen of death with the message above.
  If I can't go beyond that message or access the bios... what should I do please? /

  How can I get past this screen and reinstall windows

  I hope you can help...

  Thank you

  Hello

  The fact is that you have laptop for 10 years and I really wonder if anyone here has any experience with this good old classic.
  If you are unable to enter BIOS, the situation is quite serious. You may have Floppy drive for this laptop?

• Satellite L300 - T2FTP Windows sockets of initialization failed

  After login, I get the following message:

  T2FTP Windows sockets of initialization failed

  At the same time, the system issues a message that he has found a new unknown device and the driver must be installed.

  Before that I did NOT add a new hardware device.

  Click the button start only generates a message: Windows Explorer does not react.
  It is impossible to call any other routine.

  Unfortunately I can not find my recovery CDROM.

  Are there opportunities to save my system?

  Toshiba Satellite L300 model PSLB8E
  Windows VISTA-32 bit

  Hello

  I never met such a problem. Have you installed any programs recently? It seems that the software related issue. To be honest, it is sometimes easier to reinstall the operating system than to try to fix it.

• Satellite L350-264: webcam initialization failed

  I just bought a new L350-264 (PSLD4E).
  Built in web cam worked fine for a few days but now when I turn the laptop on an error says "the Web camera initialization failed.
  Please check your device and restart the application or computer.

  No other information is provided.
  I restarted the laptop and tried to open the camera menu utilities Toshiba, but the same error is returned.

  Can anyone help?

  Hello

  What do you think of born of the webcam software installation?
  Read about the error messages similar here and especially the user could resolve this reinstall the webcam software.

  The software can be downloaded from the European pilot of Toshiba page!

• Satellite L350 - Webcam initialization failed

  I'm new here so not sure if I'm posting in the right place.

  I have a Toshiba Satellite L350 (Windows 7) that I bought in January. Everything was fine until the last two weeks when my webcam suddenly stopped working and when I sign in Dungeon getting a webcam of the message initialization failed, please check your device and restart the computer or the camera.

  I went to settings and it says camera works, but it is not. I also have another pop up when I sign saying check Toshiba laptop stopped working (not sure what it is)

  Can anyone help please?

  Thank you
  Jan

  Hi Jan,

  I had the same question as my webcam didn't work and so I reinstalled the driver for the webcam that could solve my problem. You can download it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  But I recommend to remove the old version first. Then use CCleaner to clean the registry and then you can install the latest version on the Toshiba site.

  Toshiba laptop recording you can remove from Control Panel > Add/Remove programs.

  Check this box!