Essbase start-up, the system of survey error "CSS initialization fails.

Similar Questions

• When you install SP2, the system displays code error 80073712

  "I tried several times to install the sp2, but the system allways gives me error 80073712i thinks that the problem of resources for" path to record "in the hard drive. Please let the me know how sucesfull to try. My system is Windows VISTAbasic SP1 . My e-mail is: * e-mail address is removed from the privacy *.

  * original title - when tryfor open-heart sp2 the system gives me error 80073712 *.

  How to solve the problems of Windows Vista and Windows Server 2008 service packinstallation

  http://support.Microsoft.com/kb/947366>

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/47d599e5-db9c-41AC-BA38-6224f42b191e>

• Orb is blocked at the start of the system on my Vista Ultimate SP2.

  Original title: Orb

  Hello

  Orb is blocked at the start of the system on my Vista Ultimate SP2, even if the box is checked in the setup of the system. What could be the reason? And there at - it a danger by unlocking it? If this is not the case, how can I put it so that it hangs every time you start?

  Thank you

  Hello
   
  1. When you say its blocked, that you get any message or it does not appear at startup?
   
  2. don't you perform a normal startup or selective startup?
   
  I suggest that you follow the steps below and check if the problem persists.
   
  Step 1:
   
  This can be caused by your security software, I would temporarily disable all security software and check if the ORB is blocked.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  If it works, then give exception in Firewall setting for the program.
  Orb is a third-party application, and if trust you him, you can add as an exception.
  WARNING OF THIRD PARTY SOFTWARE
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
  
  Let us know what happens in safe mode.
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• When I click on "Show data" in the physical layer, the system throws an error of that connection failed

  Hello experts.

  I've download a RPD on my local machine. I have already imported all of the tables used in this RPD on my local machine. I created the DSN (obiee_reports), and the test connection is successful.

  I created a pool of connections with the DSN (obiee_reports). However, when I try to "view data" in the physical layer, the system throws an error "connection failed". Also, I am unable to create any analysis.

  I m do not know what I missed. Please notify.

  Thank you and best regards,

  Serene

  If you use Oracle db then go to OIC as calling interface.

  HostName: port / ServiceName would be one that is suitable for use

• Whenever I start my computer, I get "0 x 80070006 initialization failed. The handle is invalid. »

  Whenever I start my computer, I get "0 x 80070006 initialization failed. The handle is invalid. "How can I fix it?

  Since my answer does not resolve your problem, please do not mark it as the answer.  I would like to deselect you.  Thank you.

  Try a clean boot of your PC and see if the error persists. Exactly how is determined by your version of WIndows and so far you have not updated this thread to let know us what version of Windows you are using.  Do now.  Click on modify under your original message and change the drop-down windows to indicate your version of Windows.

  You can also see items here: http://support.microsoft.com/search/default.aspx?mode=a&query=perform+a+clean+boot&spid=global&catalog=LCID%3D1033&1033comm=1&ast=25&ast=28&ast=30&ast=31&res=10

• C:\Windows\System32\***32.dll errors, from the start of the system and start the program.

  Hey. I received error messages and may not know whats going on. At the start of my laptop (Vista Premium 64, 2.0 ghz Core 2 Duo, 4 GB RAM, 250 GB hd), a series of error messages from reading: "* program title *-bad Image."      C:\Windows\System32\*Dllname here*.dll is not designed to run on Windows or it contains an error. Try to install the program using the origial installation media or contact your system administrator or support software provider. "The name of the cottage change programs and I get messages of 15 or more at the same time. The first so-called 'C:\windows\system32\fwcfg32.dll' error count, the next will say "khdtj9jg32.dll" and the final few say "dispex32.dll". Whenever I hit "ok" in the message, the name of the program window in the changes of the header. I tried to solve my problems (with no success) and do you have a file search for the files in the locations of scpecifed in error messages. I discovered the three files (fwcfg32.dll, khdtj9jg32.dll, dispex32.dll) do not exist in the system32 folder, but they do exist in the "syswow64" folder The system32 folder has files fwcfg.dll, khdtj9jg.dll and dispex.dll in if (note the "32" is not included in the file names). I was on my computer for 7 hours yesterday without problem, and everything I did was organize music files in my documents. I went online to look for something, then shortly after my computer slowed down upwards. He acted as if the RAM was complete (although he was not even 25% used), so I just rebooted my laptop in the hope that a RAM reset would fix it. Then restart I started to receiver messages error and also whenever I start a program. I scanned my system and removed 7 Trojan horses... even if I run Norton and Webroot SpySweeper somehow these got... that's not the point. I have a feeling easily, that played a helping hand to my troubles, and those who are deleted from my computer. Now, I have to recover from the disaster. Any suggestions? Thanks for your time!

  P.S. ~ just like a note aside, I did several searches on the internet, including on the microsoft forums, for the names of 'fwcfg32.dll', 'khdtj9jg32.dll' and 'dispex32.dll'.dll files and got zero results.

  Hello

  It seems that you have an important infection using the below methods of OVERKILL checking that no one can program
  detect or remove malicious software. Only when you are 100% sure you're own doing the cleaning included below.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-my/default.htm?mkt=en-my

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Cleaning ONLY when you are sure that the system is clean:

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Cursor flashing at the start of the system and hard drive not working do not on the other computer

  Original title: I need help with my Hardrive

  Recently I had problems with a hard disk of computers. So I'm going to give guys the full story, I fell on this computer, it's actually my mums computer and it had a blue screen at startup error. I'm sorry, but I don't remember that the error was called on the top of my head, basiclly I quikly searched online and alll they say should use fixboot. So I did and the computer booted Windows XP very well. So the next day, when I was starting the machine (just to let you know, it would be the first start since I used fixboot, other than the right after that, I don't know if it would make a difference).

  In any case, while trying to start, there was just a slider, or as underscore that retain just flashing in top left corner. I thought that maybe I should reinstall windows on another partition so my files would be safe. I did it, the installation program had no problem with it, but when I booted up I got the same line of flashing underscore / cursor in the upper left corner.

  I thought that maybe I should back up the hard drive using my other computer so I tried to plug in the hardrive in my work computer and the hardrive started to heat up and as if it worked but any hardrive was getting into my computer, I refreshed it, started the computer upward once again, nothing.

  So my question is what is the problem with this hardrive and how I save? I'm ready to do anything, use the live CD, using another computer. I have precious moments of family on the hardrive.

  Thank you guys

  Hi Joemost,

  As you have important data on the hard drive. We recommend that you contact the vendor of hard drive to diagnose hard drive or visit the nearest tech store to save your data.

  There are chances that the boot files are missing on the computer and also you could have not connected the hard drive as a slave when you connected to the other computer. Once you have saved the data, you can repair the existing windows and check if it starts successfully.

  Try these steps to repair install Windows XP:
  a. start the computer using the XP CD. You may need to change the boot order in the BIOS OF THE system for the CD starts before the hard drive.
  b. on the "Welcome" screen, press ENTER to start the installation of Windows.
  c. accept the license agreement and Windows will search for existing installations of Windows.
  d. Select the XP installation you want to repair in the list, press R to start the repair.
  e. the installation program copies the necessary files to the hard disk and restart.  Do not press any key to boot from CD when the message appears. Setup will continue as if it were a clean install, but your applications and settings are preserved.
  f. when the installation is complete, check if Windows starts correctly.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows search service couldn't start. The system does not have the specified path. How can I fix it?

  I'm having a problem where IE takes up to five minutes for a web page.   I see the mistake of follow up in the event viewer:

  Log name: System
  Source: Service Control Manager
  Date: 14/08/2012 21:14:10
  Event ID: 7000
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Owner-PC

  Description:
  The research service Windows could not start because of the following error:
  The system does not have the specified path.

  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event ">"
   
     
      7000
      0
      2
      0
      0
      0 x 80000000000000
     
      391647
     
     
      System
      Owner-PC
     
   
   
      Windows Search
      %%d Ko
   
  

  When I run the program Microsoft FixIt Center I get 3 error messages that do not reach the difficulty.

  ---------------------------------------------------------------------------------------------------------

  (1) Windows Search is crashing or not fixed failing

  Windows Search crashes or breaks down after that that she has started.  In addition, an event ID 7042, 100 or 1000 is logged in the Windows event log, or the Windows Search Service is not running.

  (2) search Windows does not start and gives an error message no fixed

  Windows Search does not search results show and there is an error at startup.  A 3024 or event ID 1006 is logged in the Windows event log, or the Windows Search Service is not running.

  (3) Windows search shows no results not fixed

  Windows Search shows no results.  In addition, an event ID 7040 is logged in the Windows event log, or the Windows Search service is not running.

  ---------------------------------------------------------------------------------------------------------

  Someone at - it solutions?  Oh, I'm running Vista 32 Home SP2

  Thank you

  Hello

  Did you change to the computer?

  I suggest you to see the links and check.

  The problems with the search

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-searching

  Improve Windows searches using the index: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance

• In Vista, doing the system restore, get error "unspecified error occurred when using System Restore.

  My system restore keeps coming back with the error, unspecified error occurred when using System Restore. Cannot change files. Also, after that I am unable to use my avast antivirus. All the sheilds on my Avast are lost. I; m not computer saavy so please help me

  Hello

  You can be infected with the Malware

  malware stops normally you use the system restore protect themselves remove you

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If not, try Safe Mode do a system restore

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Attempts to resolve the deadlock 'hpqddsvc' at the start of the system. Anyone else?

  Vista SP1 Home Premium 32 bit OS. I noticed sevveral weeks that when I booted my system there was a delay time for my internet connection set up - there was a blue 'x' on the network in the menu bar lower right. I went to look at the log of the problem. Here's where I see whenever I turned on my system there was a blocking error "hpqddsvc. The first time it happened was on 21-02-09. I went to my list of updates of Windows installed and there was an update that is installed on the same day. Should I uninstall this update of Windows? I tried to send this info to the center of MS resolution as indicated on the page of the system, but it was not a resolution on this particular issue in the file.
  If anyone else has experienced this problem, please respond with advice on how to proceed. Thank you

  Hi 59Harley

  Thanks for your post on the Forum in Vista.

  Before you uninstall the update of Windows, I'll try to disable HP Services that start automatically.  Most of the HP services need not be started during startup.

  1. on the keyboard, hold down the Windows key and press R (Windows key is between the CTRL and Alt keys)
  2. in the run box, type MSCONFIG.  (not case sensitive)
  3. go to the Startup tab
  4. uncheck all entries from HP.
  5. click apply and then OK.
  6. restart your computer.

  Please post back and let us know if this solved your problem. Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• L875D-10th satellite no longer starts after the system update

  Hello

  After a Windows Update yesterday my system unbootable - little matter what I try!

  And I tried many things to get it started again.

  think like:

  -Passage uefi depents csm and back on trial
  -Different installation DVD original Windows (Win 7/8 x 64 & x 86)
  -Different USB key
  -Erase the HDD on an external PC
  -Reset the UEFI with F9 while inside - system breaks down right!
  -Remove the BIOS battery and battery hand while it is also removed from power like 2 hours
  -Replace the DVD with another
  -Tested external RAM and HDD - ok status

  I can access the menu of boot with UEFI himself (channels here is saved and system restarts), but past that I just get a black screen with backlit, on NumLock no longer, have powerdown to reset.
  At startup, I see the Toshiba Logo.

  Is there an external means to completely reset the UEFI next to Load Defaults while in there?

  Any other suggestions I can do?

  (Sorry for my bad English and greetings from the Germany)

  Hello

  > Is there an external way to completely reset the UEFI next to Load Defaults while in there?

  There is no other method to change the mode of the UEFI.
  You must do it in the BIOS (press F2)

  In order to boot from the external environment or to install systems as Windows 7 or other, need you to change disable secure startup and must pass the CSM UEFI.

  In which case you would use the Toshiba recovery media, these changes are not necessary.
  Have you tried to reinstall the system using the Toshiba Recovery Disk or Flash Recovery USB stick?
  Did you create this recovery media in the past?

• restart of the computer from standby when I press start on the system unit, but not when a scheduled task is started

  Windows XP Professional SP3, updates, motherboard Asus P4P800 series (2006). The original system dates back to 2002, but there have been many additions and replacement upgrade. More recently, 2011, two old hard drives have been replaced (XP had destroyed itself requiring a reinstallation), with a much larger and HD, and the cpu has been replaced by a 3 GHz one.

  I've configured the BIOS to enable the use of standby mode (standby). I wanted to be able to run scheduled backup jobs early in the morning, a little before I wake up normally. The goal was to conserve energy. Whenever I leave the computer for more than an hour or two, I put it in sleep mode. In recent years, that it worked well.

  Scheduled tasks are still, in fact, more surely than ever. But now, when I press the Start button on the system unit, the operating system is restarted rather than restore the State of the system at the time of Eve. This happened almost constantly for maybe a week. I was always a guard never enter sleep mode when I'm aware of any application running who has not completed a requested operation (save a file, defragment a disk, etc.).

  I searched on the basis of knowledge, but not found any problems like that. There has been no hardware changes, no new devices; only change of important software (but it is difficult to see how it might be relevant) was the resettlement of Java Runtime Environment 6.x to support the help of OpenOffice. Although I have not checked, I am reasonably sure that all drivers are up-to-date.

  No idea why this should suddenly become a problem or how to fix?

  Hello

  I suggest you follow these methods and check.

  Method 1: View the steps suggested in the following link.

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

  Method 2: Use the Powercfg.exe utility to restore the default power mode

  You can use the Powercfg.exe utility to copy the power mode of the user by default to the currently logged user profile. You can do this because eating patterns are only related to individual user accounts. To copy the default user schema using the Powercfg.exe utility, follow these steps:

  1. click on Start, click run, type cmdand then click OK.

  2. at the command prompt, type the following command and press ENTER:
  powercfg /RestoreDefaultPolicies

  Method 3: How to perform the check and clean boot if the problem persists.

  http://support.Microsoft.com/kb/310353

  NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.

  I hope this helps!

• Can we prevent the popup Scheduler task Service at the start of the system for a scheduled task to run periodically?

  When I have any task scheduled to run periodically (for example, daily, weekly), the Task Scheduler Service dialog box always appears on the logon screen if the computer was turned off at the time of day the task should run. From my experiences, it seems as the process that determines a spot missed his scheduled time does not consider that the PC is turned off. There seems to be no way to prevent this. Even when a task is scheduled to run at the system startup and periodically, the dialog box appears when the login screen appears.

  This analysis is correct?

  I have three tasks in Task Scheduler. I didn't know anything about the task scheduler until I started having the popup. The first time I looked at Task Scheduler these three tasks have been implemented as follows.

  Adobe Flash Player Updater - Annex: every 1 hour (s) 03:05 for 24 hour (s) on every day...

  GoogleUpdateTaskMachineCore - Annex: Run when the user login

  GoogleUpdateTaskMachineUA - Annex: every 1 hour (s) 20:51 24 hour (s) on every day...

  I have no idea how or when it has been implemented in this way, but I only started to receive this dialog box by the end of 2011. Would it have happened during an Adobe Flash Player update or update of Google?

  I changed the calendar. I've now set up three tasks to run at startup of the system. The popup appears now. Is there a reason why I have to trigger these tasks once per hour?

  CSF

  You don't need these tasks scheduled at all.

  You can go to each site and look for updates when you want.

  If you have installed google something he will continue to try to catch up, and if you have installed adobe you can disable automatic updating.

• Aspire One D257-13478 does not start after the system BIOS flash.

  I gave my child a D257 - 13478 new ASPIREONE.

  It came with Windows7 starter - was very slow, crippled and crashed a lot.

  After a while, I have re-formatted the HARD drive to remove Windows-resources-pork-7, and I installed Windows XP Professional (SP3).

  After which, the netbook has been much faster, and I could navigate with 5 windows open browser (FireFox) and NEVER receive (not RESPONDING), as I was always getting with Windoze 7. He's been good for 5 months.

  Anyway, it worked fine except that I could not find driver XP for [CODE 10] Broadcom wireless card,.

  so we were not using WiFi.

  Today I read the suggestion to update my BIOS to correct [CODE 10 number}. I went to acer link and downloaded the BIOS of the Organizer, RAN the EXE and the netbook went to restart.

  When the ACER logo appears, a blue screen flashed QUICK, and the netbook RESTARTS again.

  Asking me to start Windows normally just repeat what's happening above

  When I choose Safe Mode... drivers will charge up to Mup.sys and then the system just REBOOTS.

  When I try the last good Configuration known, same thing.

  Enter the system (F2) shows, Version of the system Bios configuration utility: v1.15

  It used to be all about v1.10.

  .................................................

  Then. What is my next step?

  Will be my HD reformatting and reinstall WIndowsXP DIFFICULTY this problem?

  or

  How can I RESET my Bios to v1.10 (when everything was fine).

  No software to use on a USB key to solve this problem? (because theres no CD don't drive of course)

  Thanks in advance.

  Hi MOne

  The flash will have changed the BIOS settings, so go in the BIOS settings and verify that the setting of the HARD drive is in AHCI mode. If it still does not start XP, then it is worth trying to format & reinstall Windows from scratch.

• XP hang on to the restoration of the system during installation error: no changes have been made to your computer to choose another restore point restart the system restore

  Original title: XP hang up to the restoration of the system during the installation

  During the configuration of the system in the process of getting XP to hung up on the screen of the system restore

  The message says:
  No changes have been made to your computer
  To choose another restore point, restart System Restore
  To restart System Restore, click Home
  The jury of the mouse and the button doesn't work so I can't click Home tab
  Help

  Hello

  Why you try to run the system restore?

  Step 1: Check if you are able to complete the restore of the system in safe mode.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

  For more information, please see the following article.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796