connection of storage to another server after failure powervault
File1 is a PE and a file server. PowerVault houses all storage file server and is connected to a file1.
If file1 breaks down, it is possible to get an another EP and name File1, join to the domain, the Powervault to connect to this server from file1 and have everything up and running such as all actions with permissons and actions on Powervault intact?
Operating system is Windows 2003.
Tags: Dell Products
Similar Questions
-
Does not connect with the e-mail server after update.
Thunderbird ran an auto update yesterday. Then it just stopped working. It does not connect with the Comcast email server. An error message appears "Unable to connect" and "the connection was refused when attempting to contact live.mozilla.messaging.com. I don't want to uninstall and reinstall for fear of losing my emails and address book. How can we get Thunderbird set, there is no tool in the toolbar to enable the debugging and correction of program errors.
I use Thunderbird version 38.1.0.
Thank you.
The problem solved itself, Thunderbird has just started working. I followed the thread suggested by Christ1 and found none of it applied. No malware, no browser, no certificate error security block. I did, however, in Thunderbird, under Tools/Options/General uncheck the button for "When Thunderbird launches, show the Start Page in the message box." I do know that if this helped, Thunderbird still do not access Comcast mail for hours after that, even with several stops and restarts.
Until the next problem...
-
Cannot connect to share on another server with a short name only
We are having a problem with a SCCM server on windows 2008 R2 enterpeise and trying to connect to another Server 2003 \\aush-pen-xxx01\c$ and gets the error message the specified network name is no longer available. I can do a nslookup and ping the server very well. can map using the ip address and the fully qualified name fine. Can get to other thin servers. and also connect to other servers to the server aush-feather end. This works if the server, then it stops again. No errors in the event log. Tried to get other disks on the server and the same issue. I created another share with permisions for all and always the same question.
Any ideas?
- This is the C$ which is the part of the administrator and I can access other servers. I created a test share and get the same question even if share and security permissions are at the world. When I restart the SCCM server, it's good for a while, then I get the error again. I need for SCCM to access this share. Maybe some kind of smb or implementing caching perhaps?
Hello mrdamo,
Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
Please ask your question in the Technet Windows Server General category.
http://social.technet.Microsoft.com/forums/en-us/winservergen/threadsThank you
Marilyn
-
Updated XP PC to Windows 7 Pro 64 bit. First upgrade failed due to the bad version of Win 7. (Distorted version of seller). Correct version relocation has left two versions installed so I started reinstalling the correct version and reformat selected before continuing. (21/04/16) Installation proceeds correctly, validated and activated license, but the update function didn't work. One version on the disc after the previous action. Then I downloaded and installed IE 11 manually the version 11.0.9600 of Microsoft (same date) and then downloaded and installed MSE from Microsoft 4.9.218.0 version (same date). MSE updates have not downloaded initially until I ran Win update problems solving.
I have since run program sfc/scannow (without problems of integrity or repaired files), update Windows utility for troubleshooting and Fixit programs. I also stopped the update service, delete the appropriate configuration of software and restarted the service records. Still not connection with update server.
Download and install the following update manually. This greatly speeds up the update of Windows on new installations of Windows 7.
Installation and research updates is slow and high utilization of the processor occurs in Windows 7 and Windows Server 2008 R2
https://support.Microsoft.com/en-us/KB/3102810 -
Connect with php from another server
Hello. I have the following problem.
I use loadVars to communicate with a .php file. When the files flash is on the same domain url, say www.domain.com, as the communication between flash and php .php file works. When I put the flash file on a different domain than the .php file (something like flash - www.domain2.com and .php - www.domain.com) the communication process no longer works.
Someone can explain why or can give me a solution in order to run the FLA file from one server/domain other than the .php file and continue to communicate between these two?
Thank you very much.Thank you.
But I found solutions that use a crossdomain.xml to allow access to my swf on this area.
-
VM does not start after moving to another server
Hi all
After our production server is down with a motherboard broken, we install another server (different hwardware) and installed vSphere 5.1. Existing virtual machines (database) (origin server) are on a raid (two drives raid 1) controller. We installed the RAID drivers in vSphere to make the database accessible (Areca RAID controller). Then, from the "Configuration" tab we opened the VM (browse the database) of the databases of the existing virtual machine, rightclickt to the servername.vmx folder and choose "add to the inventory. After that, the VM are added to the inventory of the VM client. The first time, we started the virtual machine, he asked if the virtual machine has been moved or copied. Because we did not know the correct answer, we choose "copied". He mentioned when we did not know the correct answer, choose "copy". After that, there are a lot of disk activity, but it ends in an error that it cannot find the vmdk file.
Power on virtual machine
MachineName.com
[File]
/vmfs/volumes/504dbfc2-bc271df0-F9B3-001e67339752/MachineName.COM_2.VMDK was not found.
Then the boot stops and nothing happends.
In the original situation all disk storage took place in the Bay of disks in the RAID controller, so there where no additional drives installed for storing the snapshot.
Help, please!
Have you added two virtual disks to the virtual machine? The _2 in the file name machinename.com_2.vmdk indicates usually that it's the second virtual disk on the virtual computer
-
CC update cannot connect to the server after 2% no idea why
I tried to download and install an update CC, but get a could not connect to the server after 2% message, ideas?
If you are facing difficulties to reach the activation server please see
http://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html
and
-
Local server connect to a domain license server
I have a server terminal server running under windows 2012 locally (domain a)
My license server is running on windows 2012 arrived in the area. Forest mode
I try to establish a connection between the 2 of them and it fails.
***
To identify possible licensing issues, the administrator for the server monserveur.com license credentials are required
***
When I provide a credentials area, it works and it reboot after failure. (No domain server)
I even try to use a local (not domain) administrator account to connect to the license (supported in domain) server and fail too.
I have no problem if you are using windows 2008.
Anyone experience this before?
Thank you
Rgds
Wang
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
Problem with internet connection 64-bit Windows Vista, unexplained intermittent failure.
original title: PROBLEM CONNECTING WINDOWS VISTA 64 BIT INTERNET - UNEXPLAINED INTERMITTENT OUTAGESOn HP a6542p PC with factory installed Windows Vista (64-bit), Vista operating system program does not take account of Internet broadband, which, in reality, a good connection. for the first 2 years of operation, the PC internet connection worked well, but a year ago, he started this OFF intermittent / WE internet problem. SOMETIMES, I can manage to temporarily restore the internet after running randomly across the machine diagnostic & installation programs available to the home screen, OR SOMETIMES also after running REGEDIT in the start (search) bar and watching the TCP/IP settings (do not change them, just watch), but the internet connection drops again after the machine is idle for a few minutes. I get very tired of the exercise Dog & Pony to run through the different random procedures & hoping that something will work. I tried the fix from Microsoft using a flashdrive D/L from the Windows site to my XP machine and tried a few manual corrections proposed on various websites, but nothing seems to work. I have no HP manufacturer disk to reload the Vista operating system. The connection is good, the cable is good, but Vista gives me contradictory information about the diagnosis, such as ERROR 815, and he tells me also a cable is disconnected (not true, the cable is plugged & good & works very well when the Vista connection is restored), while another diagnostic message indicates the internet connection is good, at the same time other messages say is not. What can I do to fix this problem in Vista? Personal e-mail is: * address email is removed from the privacy * -I will check that URL of Web site for the possible answer. Thanks in advance.
Imrand - Thanks for the tip, I tried it & it didn't work. However, I found an update of the HP driver for the network card Realtek in my machine, & after d/l this new driver, the problem seems to be fixed. The Web connection is still good after several cycles of closing & reboot. I'm not sure, because with this HP Vista PC, I can never be sure of anything, but I think the problem might be due to the rotating system off the NETWORK adapter in sleep mode, & so not put on when waking up. Diagnostics messages confused and contradictory pages of different screen Windows were of NO use, it looks like the internet connection was good (which it was), while the other would be at the same time say there is no connection due to the disconnection of the cable, while the other at the same time say that the DNS server broadband couldn't recognize my internet query. Total BS of Vista, which has compounded the problem than he was. I only am not surprised Microsoft abandoned the Vista operating system so fast, so many other users of Vista have similar internet connection problems. The user friendly and very stable XP operating system I have on an old PC of Insignia is my favorite. Microsoft had to quit with it, IMO.
Thanks for your help, Cimarron
-
DOUBLE DB: ORA-17629: unable to connect to the remote database server
[oracle@ora11g1 ~] $ export ORACLE_SID = sales
[oracle@ora11g1 ~] $ rman target sys/sales@sales
Recovery Manager: release 11.2.0.1.0 - Production Wed Jun 5 13:00:15 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SALES (DBID = 690066655)
RMAN > Connect auxiliary sys/salestby2@salestby2
connected to the auxiliary database: SALES (not mounted)
RMAN > CURRENT SPFILE DATABASE of TARGET duplicate FOR THE EVE OF the DATABASE
2 > DB_NAME SET = 'sales '.
3 > SET DB_UNIQUE_NAME = "salestby2".
4 > control_files='/u02/oradata/salestby2/control01.ctl','/u02/oradata/salestby2/control02.ctl SET'
5 > SET DB_FILE_NAME_CONVERT = "/ u02/oradata/sales /", "/ u02/oradata/salestby2 / '.
6 > SET LOG_FILE_NAME_CONVERT = "/ u02/oradata/sales /", "/ u02/oradata/salestby2 / ';
From duplicate Db 5 June 13
using the control file of the target instead of recovery catalog database
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID = 20 type of device = DISK
content of Script memory:
{
backup that copy reuse
TargetFile ' / auxiliary format of the u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsales
' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwsalestby2' targetfile
' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesales.ora' auxiliary format
' / u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora';
clone of SQL 'alter system set spfile = "/u01/app/oracle/product/11.2.0/dbhome_1/dbs/spfilesalestby2.ora";
}
execution of Script memory
From backup 5 June 13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID = 58 type of device = DISK
RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 05/06/2013 13:05:26
ORA-17629: unable to connect to the remote database server
ORA-17627: ORA-01017: name of user and password invalid. connection refused
ORA-17629: unable to connect to the remote database server
continue other job steps, not a not working will not re-run
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of Db in dual at 05/06/2013 13:05:27
RMAN-03015: an error has occurred in the script stored memory Script
RMAN-03009: failure of the backup command on the channel ORA_DISK_1 at 05/06/2013 13:05:27
ORA-17629: unable to connect to the remote database server
ORA-17627: ORA-01017: name of user and password invalid. connection refused
ORA-17629: unable to connect to the remote database serverWelcome to the oracle forums!
Please take the time to go through [url https://forums.oracle.com/forums/ann.jspa?annID=1535] FAQ PAGE
Always after 4 version oracle numbers and details of the OS.
Post any request outside has put between.
\Tags
Mark your questions answers if you give the answer
Password for the SYS user on primary and standby must be the same. Copy the master password for the backup server
SCP $ORACLE_HOME/dbs/orapwv112
-
the database error duplicate from one server to another server
Hello
I'm practicing duplicate database to a single database server to another server. Path material and pilot on 2 machines is the same. Here are my steps:
-Clone site:
1 change the listener.ora with content:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain) (PORT = 1521))
)
)
ADR_BASE_LISTENER = / u01/app/oracle
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = orcl)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/db_1)
(SID_NAME = orcl)
)
)
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = WE
2. stop and start receiving once again, show message as:
Service "orcl" has 1 instance (s).
Instance "orcl", status UNKNOWN, has 1 operation for this service...
The command completed successfully
3. create pfile from spfile file.
4. stop and startup nomount with pfile is new pfile create in step 3.
--------------------------------------- Source site
1 edit tnsnames.ora with content like:
VVCOREDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = vvcoredb)
)
)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = 10.254.1.235) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
)
)
2 run the command of rman like these:
RMAN > Connect target sys@vvcoredb
RMAN > target password database:
RMAN > Connect auxiliary sys@orcl
RMAN > database auxiliary password:
RMAN > DUPLICATE TARGET DATABASE for database orcl active spfile nofilenamecheck.
Then the result show below:
From Db double to 24-SEP-12
using the control file of the target instead of recovery catalog database
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID = 63 type device = DISK
content of Script memory:
{
backup that copy reuse
TargetFile ' / u01/app/oracle/product/11.2.0/db_1/dbs/spfilevvcoredb.ora' auxiliary format
' / u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora';
clone of SQL 'alter system set spfile = "/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora";
}
execution of Script memory
Backup to starting 24-SEP-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID = 74 type device = DISK
Backup finished 24-SEP-12
SQL statement: alter system set spfile = "/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora"
content of Script memory:
{
clone of SQL 'alter system set = db_name
"ORCL" comment =
"reproduce" scope = spfile;
clone to stop immediately;
startup nomount clone;
}
execution of Script memory
SQL statement: alter system db_name set = comment "ORCL" = "duplicate" scope = spfile
Instance Oracle to close
connected to the auxiliary database (not started)
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of Db in dual at 24/09/2012 17:44:12
RMAN-03015: an error has occurred in the script stored memory Script
RMAN-04014: failed to start: ORA-01261: parameter db_recovery_file_dest destination string cannot be translated
ORA-01262: Stat failed on a destination of the file directory
Linux-x86_64 error: 2: no such file or directory
I don't know what wrong with my pfile file? I said to correct my pfile site clone like this:
ORCL.__db_cache_size = 1476395008
ORCL.__java_pool_size = 16777216
ORCL.__large_pool_size = 16777216
ORCL.__oracle_base='/U01/app/oracle'#ORACLE_BASE the value of the environment
ORCL.__pga_aggregate_target = 1342177280
ORCL.__sga_target = 1979711488
ORCL.__shared_io_pool_size = 0
ORCL.__shared_pool_size = 436207616
ORCL.__streams_pool_size = 0
*.audit_file_dest='/U01/app/Oracle/admin/ORCL/adump '
* .audit_trail = "db".
* full = '11.2.0.0.0'
*.control_files='/u01/app/oracle/oradata/orcl/control01.ctl','/u01/app/oracle/flash_recovery_area/orcl/control02.ctl'
* .db_block_size = 8192
* .db_domain = "
* .db_name = "orcl".
*.db_recovery_file_dest='/U01/app/Oracle/flash_recovery_area/vvcoredb '
* .db_recovery_file_dest_size = 4070572032
*.diagnostic_dest='/U01/app/Oracle '
*. Dispatchers ='(Protocol=TCP) (SERVICE = orclXDB)"
* .memory_target = 3313500160
* .open_cursors = 300
* runoff = 150
* .remote_login_passwordfile = "EXCLUSIVE."
* .undo_tablespace = "UNDOTBS1.
Please suggest me I miss some steps when trying to duplicate database?
Any suggestions are welcome.
Thanks in advance!
P/s: sorry for my bad English.This error is because the location of the controlfile specified in your spfile is not present on your server to clone. Change the location of the parameter cntrolfile in spfil or create the same location on the server.
Published by: Slim on 24 Sep 2012 17:47
-
Dear friends,
So far I have saved in my local hard drive. Now, I am required to backup in another server.
How could I do?
My backup script:
DB_Backup.SQLDBBackup.bat set ORACLE_SID=db sqlplus/nolog @e:\Oracle_Backup_Data\Details\Script\DB\DB_Backup.sql
DB.rcvconnect sys/password as sysdba; alter system switch logfile; alter system archive log current; $Rman target sys/password CMDFILE e:\oracle_backup_data\Details\Script\db\DB.rcv LOG e:\oracle_backup_data\Details\Script\db\DB_outfile.txt;
Please guide meRUN { backup database format='e:\Oracle_Backup_data\Archived\DB\%U_%I_%T.bkp' tag="everyday_full_bkup" plus archivelog format='e:\Oracle_Backup_data\Archived\DB\Arch%U_%I_%T.arc' tag="arcbkp"; backup current controlfile; restore database validate; crosscheck backup; crosscheck archivelog all; } exit; exit;
Thank you!RMAN-03002: failure of command thus backup archivelog to 2011-06-14 15:05:31
ORA-19504: cannot create the file 'Z:\ORACLE_BACKUP_DATA\DB\ARCHALMESCHP_1_1_1970380511_20110614.ARC '.
ORA-27040: create file error, cannot create the file
04002 - OSD: could not open the file
S/O-error: (OS 3) the system cannot find the path specified.It seems that there is problem with authorization to map the drive.
-
cloning/copying an old r11 environment to another server (Windows)
Hi all
We are runing 11.0.3 (multi-level) under windows.
DB, simultaneous Manager, the report server on a server
Forms Apache Server, WEB, on another node.
We are facing some curruption of disc and a few hardware problems. So I need to clone my system to the other server.
Can someone help me to clone R11 to another server on the windows machine.
concerning
MusaddaqHere's 11.0.3 cloning process
=====================Helios, he seeks 11.0.3 version cloning, correct me if I'm wrong any of the steps, I use the same procedure for one of our 11.0.3 instance EBS.
I am pasting the note here, then you can try to clone:
There is an internal memo to make a clone on the 11.0.x, release but it is not supported. Please make sure that you have a good backup.
==============================================================================================================================================================
===================
Note 91985.1 Step by step on cloning the ORACLE_HOME (including DB) and APPL_TOP:
=================================================================================
Cloning an instance of Oracle Application version 11 on a separate UNIX Machine
==============================================================================Goal
---------Provide a method of cloning an Oracle Applications version 11 APPL_TOP,.
an ORACLE_HOME 8.0.X and database files included.Scope of Application &
-------------------It takes a high level of experience with Applications for this document.
Related documents
-----------------Oracle Applications version 11 for UNIX manual of Installation (part No. A57983-02)
Assumptions
-----------You have already installed Oracle Applications version 11 and a 8.0.X
ORACLE_HOME/database and all works fine.If you clone the APPL_TOP and ORACLE_HOME of quite another
UNIX box, you must make sure that the target operating system is the
same and is patched up to the same level as the source area, you are
cloning of.Measures for Clone
--------------1. on the target area, create a user and the user who owns the APPL_TOP who
has the ORACLE_HOME files and database files (will be applmgr and)
Oracle, respectively for the purposes of this document). Create an environment
file for each of these users by specifying environment variables
referenced in the Oracle version 11 for the Installation of UNIX Applications
Manual.Example of variables for the oracle user:
LD_LIBRARY_PATH
ORACLE_HOME
ORACLE_SID
TWO_TASK (if applicable)
PATH
TERM
JRE_DIRExample of variables for user applmgr:
APPL_TOP
LD_LIBRARY_PATH
NLS_DATE_FORMAT
NLS_LANG
NLS_NUMERIC_CHARACTERS
ORACLE_HOME
PATH
ORACLE_SID
TWO_TASK (if applicable)
TERMNote: Many of the following steps are since the white paper of the bridges D.
'Copy of a database'. A copy of this is located at the end of this document.2 plug the sources such as the oracle user machine and the newspaper is
svrmgrl or SQL * more as SYSDBA and SYSOPER DBA role he conceded.
Run the following command:SQL > ALTER DATABASE BACKUP CONTROLFILE TO TRACE;
The trace will be found at the the USER_DUMP_DEST value which is
defined in the init.ora file. (An example of this trace file is located
d. bridges of paper at the end of this article.)3. make a list of all data files and redo log files:
SQL > SELECT file_name FROM dba_data_files;
SQL > SELECT Member FROM v$ logfile;4. stop your database cleanly. Run each to do the following:
SQL > shutdown normal;
SQL > shutdown immediate;
SQL > shutdown transactional;5 A this point, anything that creates a process of operating system must
be lowered neatly on the Source area. Examples are: Forms Server
Process, process of Web server, concurrent managers and the database listener.6. make zip files of all APPL_TOP, ORACLE_HOME files and database files
files (datafiles and redo logs) on the Source area.7 FTP files zipped above the target area. Also ftp on the trace file
that was created in step 2 above, you will be using it again in step 8.8. unzip all the files in the new $APPL_TOP, $ORACLE_HOME locations.
You are now finished with the source area. Every process can safely be made
Save this box. The rest of the book refers to the target area.9. changing the
init .ora file on the target area (usually located in the)
Directory$ ORACLE_HOME/dbs) to reflect the structure of your new directory.
(D. bridges paper below gives examples of what should generally be)
changed in the environment).10 change the track of file that you created in step 2 to take account of your new directory
structure.11 start server manager (svrmgrl) and run the trace of the file against your
database.Example: svrmgrl (internal connect)
Svrmgrl > @tracefile.trc12 edit listener.ora and tnsnames.ora files to reflect your new
environment. These files must be in the $ORACLE_HOME/network/admin
Directory.13 put in place the process of listening and trying to connect to SQL * more to test
connectivity to the database. Make sure the applmgr and oracle
environment of the users can connect to SQL * more.14 create a link to the technology stack in the ORACLE_HOME. Example of elements to
be related:CD $ORACLE_HOME/procbuilder/lib; f ins_procbuilderv8.mk install
CD $ORACLE_HOME/browser20/lib; f ins_browser20v8.mk install
CD $ORACLE_HOME/forms45/lib; f ins_forms45wv88.mk install
CD $ORACLE_HOME/rdbms/lib; f ins_rdbms.mk install15. There are several configuration files that need to be changed so that
the Web server in order to work on the new box. The recommended method for
change the host name in the configuration files is to uninstall, then
Reinstall the Web server using the oracle Installer.16. Enter the area of the target as the applmgr and run adadmin. Choose from the
Option "reissue Applications programs. If you have changed the directory
structure for your APPL_TOP on the target from the Source area, you
will also have to choose recreate your environment file.This is a good place to open a SQL * Plus the term and log in as the APPS
user. Once you connect to SQL * more run the following query as a system of
Search for invalid objects in the database:SQL > select owner, object_type, object_name in dba_objects
When status = 'INVALID';If all objects are returned that belong to the user apps need to recompile the
APPS schema in adadmin.17 follow chapter 4 of the manual version 11 install and configure the
webserver.18 start concurrent managers. The name of the node in the-> simultaneous
Manager-> administer form should take the new machine dynamically
target name of the area.If the competitor-> Manager-> form to administer the node name is
No poster, at the prompt, type UNIX:uname - a (this will return the machine think his name)
The UNIX administrator at this stage you will need to reconfigure
the target area to register the correct node for this box.19. you must now change the profile options that could have been
affected by cloning. Examples: RRA:URL, WEB_AGENT, and
HELP_SYSTEM_BASE_URL.20 start your forms and Server Web server process after sourcing (running)
your new file of environment under the directory $APPL_TOP.21 change the static html page or set up your dynamic cartridge and
to connect to your applications on the target area.Copy of a database
==================
By Dave BridgesMove a database from one location to another is conceptually very simple.
However, you must be extremely careful or the migration fails. There are
two basic ways - a logical and a physical examination - to move a database.The logical method is to create a new empty database in the new location
(target database), perform a complete export of the original database (source
(database), and then import the source database in the target database.
This article assumes that you have decided not to use this approach. For more information
on export and import, please see the Oracle Server Utilities
Guide for your particular server.The physical approach involves the cloning of the source database. This method is
very similar to a backup of the database offline. The steps are:1 back up the source database control file in a trace file.
2. a list of all your data and redo log files.
3. perform a "clean" source database shutdown.
4. copy all the files of database redo log files, file init.ora and trace file
(from step 1) the location of the source to the target location.
5. change the file init.ora target and the trace file.
6. start the target instance.
7. re-create the control file, retrieve and open the database.Each of these steps is explained in the following instructions.
Note: The following instructions assume (1) you already have the server
installed in the location of the target, (2) all parameters are already set
environmental target and (3) If you use NT, you must
already created and started the services necessary for the target
database.1 back up the source database control file in a trace file. To connect to
the source via open or SQL database * more using an account that has the
SYSDBA and SYSOPER DBA role he conceded. Run the following command:SQL > ALTER DATABASE BACKUP CONTROLFILE TO TRACE;
This will create a text file that we will use later. This file will be
written in the subdirectory named by the value of the USER_DUMP_DEST
parameter.2. a list of all data files and redo log files. It is absolutely
essential to know about the names and locations of all the files of data and redo
the log files. To do this, run the following queries:SQL > SELECT file_name FROM dba_data_files;
SQL > SELECT Member FROM v$ logfile;
The first query will give the path and name for each of your
data files. The second query will give the same information to redo all the
the log files. Be sure to save this information for future reference.3. perform a "clean" source database shutdown. A clean shutdown is
are necessary to ensure that all data files and control files
synchronized with the latest transactions. What follows
commands give you a clean shutdown:normal stop;
stop immediately;
Shutdown transactional;Note: The shutdown transactional is not available in Oracle7.
4. copy all the files of database redo logs trace and the init.ora file
target file to the location of the source to the location. With the help of the
information collected in step 2, copy all the data source and redo log files
files to the target location. Also copy the file init.ora and the
trace file generated in step 1 to the location target.5. change the target init.ora file, and the trace file. Using a text editor
revise the init.ora file to reflect the new values for the target
database. It will be change the paths indicated in the settings
as CONTROL_FILES USER_DUMP_DEST, BACKGROUND_DUMP_DEST and all
another parameter that specifies a path/file location (see annex 1
below). Similarly, we must change the trace file. This file contains
the CREATE CONTROLFILE command we will use in step 7. You
will have to change the paths for all data files and redo log files
to reflect their new location (see attachment 2 below).6. start the target instance. Once the init.ora file is changed, you can
Start the instance. However, since we do not have control files.
You must use the following command:startup nomount;
7. re-create the control file. Once the instance is started, you can create
your control files. If you saved your file of track under mytrace.trc, you can
now create the command files by running this file as follows:@mytrace.trc
This script will create the control files, perform a database recovery
to resynchronize the control file with the rest of the database, and
Open the database.Now, your target database must be open and consistent. There may always be
some remaining tasks you need to perform, such as the creation of a password for the new file
database or create/update a listener on the node target. These tasks are
beyond the scope of this discussion.Attachment 1. Example of init.ora file
-----------------------------------Here is an example of the init.ora file.
Are entries that need to be changed to reflect the location of the target file
identified by a '<-- edit="" this'="">init.ora
AQ_TM_PROCESSES = 1
background_dump_dest = G:\orant\rdbms80\trace<-- edit="">
compatible = 8.0.5.0.0
control_files = ("G:\orant\database\ctl1home.ora",<-- edit="">
"G:\orant\database\ctl2home.ora")<-- edit="">
db_block_buffers = 200
DB_BLOCK_SIZE = 2048
db_file_multiblock_read_count = 8
DB_FILES = 1020
db_name = home
dml_locks = 100
log_buffer = 8192
log_checkpoint_interval = 8000
log_checkpoint_timeout = 0
max_dump_file_size = 10240
process = 50
Remote_login_passwordfile = exclusive lock
SEQUENCE_CACHE_ENTRIES = 10
sequence_cache_hash_buckets = 10
shared_pool_size = 6500000
sort_area_size = 65536
user_dump_dest = G:\orant\rdbms80\trace<-- edit="">Attachment 2. Example of trace file
--------------------------------Here is a sample of the output of the command alter database backup
controlfile to trace.Are entries that need to be changed to reflect the location of the target file
identified by a '<-- edit="" this'="" entry.="" edit="" this'="">Clone.TRC
1999.10.08.10.49.07.171
# The following commands will create a new control file and use
# to open the database.
# Data used by the Recovery Manager will be lost. Additional logs may
# be required for the media recovery of offline data files. Use this
# only if the current version of all newspapers online is available.
STARTUP NOMOUNT
CREATE NORESETLOGS NOARCHIVELOG CONTROLFILE REUSE DATABASE "HOME".
MAXLOGFILES 32
MAXLOGMEMBERS 2
MAXDATAFILES 30
MAXINSTANCES 1
MAXLOGHISTORY 112
LOGFILE
GROUP 1 ' G:\ORANT\DATABASE\LOGHOME1. ORA' SIZE 1 M.<-- edit="">
GROUP 2 ' G:\ORANT\DATABASE\LOGHOME2. ORA' SIZE 1 M<-- edit="">
DATA FILE
' G:\ORANT\DATABASE\HOMESYS. DBF',.<-- edit="">
' G:\ORANT\DATABASE\HOMERBS. DBF',.<-- edit="">
' G:\ORANT\DATABASE\HOMEUSER. DBF',.<-- edit="">
' G:\ORANT\DATABASE\HOMETEMP. DBF',.<-- edit="">
' G:\ORANT\DATABASE\HOMEINDX. DBF'<-- edit="">
;
# Recovery is required if any of the data files are restored backups.
# or if the last stop was not normal or immediate.
RECOVER THE DATABASE
# Database can now be opened normally.
ALTER DATABASE OPEN;
================================= ================================================================================
================================================================If you need assistance with the cloning of your instance, you will need to contact Oracle Con
relativeme.Edited by: 3Amigos December 13, 2010 01:39
-
Connection with the Apple ID server problem
iCloud on my ASUS ZENBOOK can not connect. It always returns a connection error message: there is A PROBLEM CONNECTING WITH THE APPLE ID SERVER.
My laptop is an ASUS model UX303L (64-bit) running Windows 10 Home, Version 1511.
Key points:
(1) I have connected to my very well through several iPhones iCloud account, multiple iPads, an iMac and another ZBOX PC running the same version of Windows 10. (Confirms that it is not a problem of "User" with me trying to use the wrong password).
(2) from my laptop problem, I can connect to the internet fine iCloud - Chrome and Firefox version by.
(3) I have the latest version of iTunes on the laptop, which starts very well and logs in my iTunes store (.. .in the Australia). [This is interesting, because I guess that both iTunes and iCloud connect to the same server Apple ID to check the details].
(4) I made sure that Windows is completely up to date, and that my office 2013 is also entirely up-to-date, with a full stop/restart of the laptop to make sure that nothing is installed in half.
(5) I uninstalled iCloudand reinstalled from a new download. Did not help.
(6) before the iCloud upgrade to the latest version there is + 2 weeks (I'm now on the 5.2.1.69 Version), iCloud worked perfectly, including the good synchronization of Outlook calendar and favorite contacts on different browsers. I want to try and reinstall the old version - see if that restores me to my nirvana earlier, but I couldn't find anyway to do.
Suggestions as to best 'next steps', I can take would be highly appreciated...
I have exactly the same problem... is there any help for us?
So far, I've been forced to use Windows 7
-
trying to connect a computer to a server cannot connect to windows home server runnin 2011
trying to connect a computer to a server that is running Windows Home Server 2011 but I keep an error message saying an another software installation is in progress or a restart is pending... and neither is the case then it will not download the connection software on the computer I want to save them on the server
Pookie
Server are better to ask questions on TechNet
http://social.technet.Microsoft.com/forums/en-us/categories/
Maybe you are looking for
-
HP OfficeJet Pro 8600, connected to the local network but cannot print printer on the same local network. Work tried fixing it but all attempts fail. Firewall disabled. Printer recognizes the router's LAN. Was also pointed out that the port does not
-
Map of HDMI AMD A8 Pavillion desktop
I just got a desktop Pavilion with AMD A8, Windows 7, model p7-1235. I want to get a HDMI card to show stuff on my computer on my TV with an HDMI input. What is the best card for this configuration at a reasonable price?
-
HP Deskjet 2540: Scanner Communication cannot be established.
My scanner does not work. I am connected by USB. I've tried everything suggested by HP print and Scan doctor. I tried to uninstall and reinstall the software for the device, but it still does not work. I'm very angry because it worked fine for 3 mont
-
I changed my password but cannot connect. When I reset the password they send an e-mail to my other email account, but there is no text tell me how to change it. He repeats to me just 'loading '. frustrating
-
Cannot view or access my local network of 'my network places '.
Since the evolution of my router to router ZyWEL I can't diplay or access other computers on my local network. The entire network is invisible from all computers.