Cannot view or access my local network of 'my network places '.
Since the evolution of my router to router ZyWEL I can't diplay or access other computers on my local network. The entire network is invisible from all computers.
Mallorcan salvation,
Are a. When you facing this problem?
B. you get errors?
C. do you have a cable or a wireless network connection?
D. the router is not compatible with vista?
Have e. you checked if a firewall blocks the router?
First check to see if a firewall is blocking the router then try the procedure below.
Open Network Diagnostics by right-clicking the network icon in the notification area, and then click diagnose and repair.
Make sure that all cables are connected (for example, make sure that your modem is connected to a working jack or cable phone connection, either directly or through a router).
If you try to connect to another computer, make sure that this computer is turned on and that you have enabled file and printer sharing on your network. For more information, see networking of computers running different Windows versions.
If your computer has a wireless network adapter, Windows automatically detects wireless networks that are located nearby. To see a list of wireless networks that Windows has detected, click the Start button and then click on connection to. If Windows does not detect a network that you think is in range of your computer, open help and Support and search for "Solving problems finding wireless networks."
Try not the articles below.
The problems of finding computers on a home network
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-computers-on-a-home-network
Solve problems with computers not appearing is not in the network map
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-computers-not-appearing-on-the-network-map
Network connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
I hope this helps.
Bindu S - Microsoft Support
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
Tags: Windows
Similar Questions
-
ASA 5505 IPSEC VPN connected but cannot access the local network
ASA: 8.2.5
ASDM: 6.4.5
LAN: 10.1.0.0/22
Pool VPN: 172.16.10.0/24
Hi, we purcahsed a new ASA 5505 and try to configure IPSEC VPN via ASDM; I simply run the wizards, installation vpnpool, split tunnelling, etc.
I can connect to the ASA using the cisco VPN client and internet works fine on the local PC, but it can not access the local network (can not impossible. ping remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile, I created worked very well.
Here is my setup, wrong set up anything?
ASA Version 8.2 (5)
!
hostname asatest
domain XXX.com
activate 8Fw1QFqthX2n4uD3 encrypted password
g9NiG6oUPjkYrHNt encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 10.1.1.253 255.255.252.0
!
interface Vlan2
nameif outside
security-level 0
address IP XXX.XXX.XXX.XXX 255.255.255.240
!
passive FTP mode
clock timezone PST - 8
clock summer-time recurring PDT
DNS server-group DefaultDNS
domain vff.com
vpntest_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.252.0
access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.252.0 172.16.10.0 255.255.255.0
pager lines 24
Enable logging
timestamp of the record
logging trap warnings
asdm of logging of information
logging - the id of the device hostname
host of logging inside the 10.1.1.230
Within 1500 MTU
Outside 1500 MTU
IP local pool 172.16.10.1 - 172.16.10.254 mask 255.255.255.0 vpnpool
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server protocol nt AD
AAA-server host 10.1.1.108 AD (inside)
NT-auth-domain controller 10.1.1.108
Enable http server
http 10.1.0.0 255.255.252.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 10.1.0.0 255.255.252.0 inside
SSH timeout 20
Console timeout 0
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal group vpntest strategy
Group vpntest policy attributes
value of 10.1.1.108 WINS server
Server DNS 10.1.1.108 value
Protocol-tunnel-VPN IPSec l2tp ipsec
disable the password-storage
disable the IP-comp
Re-xauth disable
disable the PFS
IPSec-udp disable
IPSec-udp-port 10000
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list vpntest_splitTunnelAcl
value by default-domain XXX.com
disable the split-tunnel-all dns
Dungeon-client-config backup servers
the address value vpnpool pools
admin WeiepwREwT66BhE9 encrypted privilege 15 password username
username user5 encrypted password privilege 5 yIWniWfceAUz1sUb
the encrypted password privilege 3 umNHhJnO7McrLxNQ util_3 username
tunnel-group vpntest type remote access
tunnel-group vpntest General attributes
address vpnpool pool
authentication-server-group AD
authentication-server-group (inside) AD
Group Policy - by default-vpntest
band-Kingdom
vpntest group tunnel ipsec-attributes
pre-shared-key BEKey123456
NOCHECK Peer-id-validate
!
!
privilege level 3 mode exec cmd command perfmon
privilege level 3 mode exec cmd ping command
mode privileged exec command cmd level 3
logging of the privilege level 3 mode exec cmd commands
privilege level 3 exec command failover mode cmd
privilege level 3 mode exec command packet cmd - draw
privilege show import at the level 5 exec mode command
privilege level 5 see fashion exec running-config command
order of privilege show level 3 exec mode reload
privilege level 3 exec mode control fashion show
privilege see the level 3 exec firewall command mode
privilege see the level 3 exec mode command ASP.
processor mode privileged exec command to see the level 3
privilege command shell see the level 3 exec mode
privilege show level 3 exec command clock mode
privilege exec mode level 3 dns-hosts command show
privilege see the level 3 exec command access-list mode
logging of orders privilege see the level 3 exec mode
privilege, level 3 see the exec command mode vlan
privilege show level 3 exec command ip mode
privilege, level 3 see fashion exec command ipv6
privilege, level 3 see the exec command failover mode
privilege, level 3 see fashion exec command asdm
exec mode privilege see the level 3 command arp
command routing privilege see the level 3 exec mode
privilege, level 3 see fashion exec command ospf
privilege, level 3 see the exec command in aaa-server mode
AAA mode privileged exec command to see the level 3
privilege, level 3 see fashion exec command eigrp
privilege see the level 3 exec mode command crypto
privilege, level 3 see fashion exec command vpn-sessiondb
privilege level 3 exec mode command ssh show
privilege, level 3 see fashion exec command dhcpd
privilege, level 3 see the vpnclient command exec mode
privilege, level 3 see fashion exec command vpn
privilege level see the 3 blocks from exec mode command
privilege, level 3 see fashion exec command wccp
privilege see the level 3 exec command mode dynamic filters
privilege, level 3 see the exec command in webvpn mode
privilege control module see the level 3 exec mode
privilege, level 3 see fashion exec command uauth
privilege see the level 3 exec command compression mode
level 3 for the show privilege mode configure the command interface
level 3 for the show privilege mode set clock command
level 3 for the show privilege mode configure the access-list command
level 3 for the show privilege mode set up the registration of the order
level 3 for the show privilege mode configure ip command
level 3 for the show privilege mode configure command failover
level 5 mode see the privilege set up command asdm
level 3 for the show privilege mode configure arp command
level 3 for the show privilege mode configure the command routing
level 3 for the show privilege mode configure aaa-order server
level mode 3 privilege see the command configure aaa
level 3 for the show privilege mode configure command crypto
level 3 for the show privilege mode configure ssh command
level 3 for the show privilege mode configure command dhcpd
level 5 mode see the privilege set privilege to command
privilege level clear 3 mode exec command dns host
logging of the privilege clear level 3 exec mode commands
clear level 3 arp command mode privileged exec
AAA-server of privilege clear level 3 exec mode command
privilege clear level 3 exec mode command crypto
privilege clear level 3 exec command mode dynamic filters
level 3 for the privilege cmd mode configure command failover
clear level 3 privilege mode set the logging of command
privilege mode clear level 3 Configure arp command
clear level 3 privilege mode configure command crypto
clear level 3 privilege mode configure aaa-order server
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4
: end
Captures we can see packets going from the pool to the internal LAN, but we do not reply back packages.
The routing must be such that for 172.16.10.0/24 packages should reach the inside interface of the ASA.
On client machines or your internal LAN switch, you need to add route for 172.16.10.0/24 pointing to the inside interface of the ASA.
-
remote VPN and vpn site to site vpn remote users unable to access the local network
As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config
The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.
ASA Version 8.2 (2)
!
host name
domain kunchevrolet
activate r8xwsBuKsSP7kABz encrypted password
r8xwsBuKsSP7kABz encrypted passwd
names of
!
interface Ethernet0/0
nameif outside
security-level 0
PPPoE client vpdn group dataone
IP address pppoe
!
interface Ethernet0/1
nameif inside
security-level 50
IP 192.168.215.2 255.255.255.0
!
interface Ethernet0/2
nameif Internet
security-level 0
IP address dhcp setroute
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
passive FTP mode
clock timezone IST 5 30
DNS server-group DefaultDNS
domain kunchevrolet
permit same-security-traffic intra-interface
object-group network GM-DC-VPN-Gateway
object-group, net-LAN
access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 Internet
IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
enable ASDM history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
AAA authentication enable LOCAL console
LOCAL AAA authentication serial console
Enable http server
x.x.x.x 255.255.255.252 out http
http 192.168.215.0 255.255.255.252 inside
http 192.168.215.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic dynmap 65500 transform-set RIGHT
card crypto 10 VPN ipsec-isakmp dynamic dynmap
card crypto VPN outside interface
card crypto 10 ASA-01 set peer 221.135.138.130
card crypto 10 ASA - 01 the transform-set RIGHT value
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
the Encryption
sha hash
Group 2
lifetime 28800
Telnet 192.168.215.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
Console timeout 0
management-access inside
VPDN group dataone request dialout pppoe
VPDN group dataone localname bb4027654187_scdrid
VPDN group dataone ppp authentication chap
VPDN username bb4027654187_scdrid password * local store
interface for identifying DHCP-client Internet customer
dhcpd dns 218.248.255.141 218.248.245.1
!
dhcpd address 192.168.215.11 - 192.168.215.254 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Des-sha1 encryption SSL
WebVPN
allow outside
tunnel-group-list activate
internal kun group policy
kun group policy attributes
VPN - connections 8
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
kunchevrolet value by default-field
test P4ttSyrm33SV8TYp encrypted password username
username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
username kunauto attributes
Strategy Group-VPN-kun
Protocol-tunnel-VPN IPSec
tunnel-group vpngroup type remote access
tunnel-group vpngroup General attributes
address pool VPN_Users
Group Policy - by default-kun
tunnel-group vpngroup webvpn-attributes
the vpngroup group alias activation
vpngroup group tunnel ipsec-attributes
pre-shared key *.
type tunnel-group test remote access
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
: end
kunauto #.Hello
Looking at the configuration, there is an access list this nat exemption: -.
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
But it is not applied in the States of nat.
Send the following command to the nat exemption to apply: -.
NAT (inside) 0 access-list sheep
Kind regards
Dinesh Moudgil
P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community
-
Easy VPN not able to access the local network
Hi guys,.
little hope can help me, I'll give you a run down on the config.
I have a border router that is a no. 2851 connected to the No. 2851 is a switch cisco 3750 running Routing inter - vlan with four VLANS.
I have easy VPN server on the edge router No. 2851 I am able to connect remotely from a client vpn cisco with a problem but I can't access the local network on the server, I tried everything with no luck.
I have a cisco VPN client installed on a 64-bit windows system 7 and I also tried with windows xp 32-bit system and still no luck.
Please I need help I need to get this race to end of trading today.
I will be copying and pasting the edge router config please if someone get review and see if the config is good.
You need to change your ACL PAT of standard to extend and to deny traffic to be translated to the Pool of VPN:
access-list 120 deny ip 10.10.10.0 0.0.0.3 10.10.50.0 0.0.0.255
access-list 120 deny ip 192.168.XX.0 0.0.0.255 10.10.50.0 0.0.0.255
access-list 120 deny ip 172.16.XX.0 0.0.0.255 10.10.50.0 0.0.0.255
access-list 120 deny ip 172.1X.20.0 0.0.0.255 10.10.50.0 0.0.0.255
access-list 120 deny ip 192.168.XX.0 0.0.0.255 10.10.50.0 0.0.0.255
access-list 120 allow ip 10.10.10.0 0.0.0.3 all
IP access-list 120 permit 192.168.XX.0 0.0.0.255 any
IP access-list 120 permit 172.16.XX.0 0.0.0.255 aniy
IP access-list 120 permit 172.1X.20.0 0.0.0.255 any
IP access-list 120 permit 192.168.XX.0 0.0.0.255 any
overload of IP nat inside source list 120 interface Dialer0
no nat ip within the source of the list 1 overload interface Dialer0
clear the ip nat trans *.
Hope that helps.
-
Cannot access our local network Web site
We have just added a Cisco ASA5510 to protect our network. Everything works except that no one in the local network can access our imail we site. Web site points to one of our public IP address, x.x.x.35 (we have access to the web site of outside and we can just? t do inside even after the addition of the ASA). Is it possible inside computers can access our web site using the public IP address? If not, my another option is to set up a record DNS pointing to the web site, for example 192.168.0.213 = www.chicagotech.net (name of the network domain is chicagotech.local)? I can? t find a way to do it. Any suggestions?
This is the Cisco ASA configuration.
ASA Version 7.0 (5)
!
ciscoasa hostname
domain default.domain.invalid
names of
DNS-guard
!
interface Ethernet0/0
nameif outside
security-level 0
IP address x.x.x.38 255.255.255.248
!
interface Ethernet0/1
nameif inside
security-level 100
IP address 192.168.0.250 255.255.255.0
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
nameif management
security-level 100
no ip address
management only
!
passive FTP mode
out_to_inside list extended access permit tcp any host x.x.x.34 eq www
out_to_inside list extended access permit tcp any host x.x.x.34 eq 8080
out_to_inside list extended access permit tcp any host x.x.x.34 eq 8383
out_to_inside list extended access permit tcp any host x.x.x.35 eq www
out_to_inside list extended access permit tcp any host x.x.x.34 eq smtp
out_to_inside list extended access permit tcp any host x.x.x.34 eq pop3
out_to_inside list extended access permit tcp any host x.x.x.34 eq 3389
out_to_inside list extended access permit tcp any host x.x.x.34 eq 13001
out_to_inside list extended access permit tcp any host x.x.x.35 eq 13001
out_to_inside list extended access permit tcp any host x.x.x.35 eq 3389
out_to_inside list extended access permit tcp any host x.x.x.35 eq pop3
out_to_inside list extended access permit tcp any host x.x.x.35 eq smtp
out_to_inside list extended access permit tcp any host x.x.x.35 eq 8383
pager lines 24
asdm of logging of information
management of MTU 1500
Within 1500 MTU
Outside 1500 MTU
ASDM image disk0: / asdm505.bin
don't allow no asdm history
ARP timeout 14400
Global interface (10 outside)
NAT (management) 10 0.0.0.0 0.0.0.0
NAT (Inside) 10 0.0.0.0 0.0.0.0
static (inside, outside) x.x.x.34 192.168.0.213 netmask 255.255.255.255
static (inside, outside) x.x.x.35 192.168.0.112 netmask 255.255.255.255
Access-group out_to_inside in interface outside
Route outside 0.0.0.0 0.0.0.0 x.x.x.33 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00
Timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
If inside users try to connect to the public IP address then, it won't work. How do fix you this depends on where is your DNS server.
If inside users use a DNS server on the external interface, and then you can have the ASA change the DNS response during its passage through the ASA. Just add the option "dns" on the end of your static controls so that they resemble the following:
static (inside, outside) x.x.x.34 192.168.0.213 netmask 255.255.255.255 dns
static (inside, outside) x.x.x.35 192.168.0.112 netmask 255.255.255.255 dns
If inside users use a DNS server on the inside, but this server responds with the public IP address, so you'll have to change within a file so that it points to your local IP address 192.168.0.21x. No other way around it, I'm afraid.
-
Slow connection XP and access to my network places
People,
has anyone suffered a slowdown of the connection and access to their favorite network since the installation of a media center?
After some research, I found that the network drive mapping may be to blame XP checks this before in check (?). So I removed those automatically created my network places and things improved, otherwise he would disappear into the ether for 5 minutes.
But there is still a delay in accessing the platform thanks to XP. Even if I cancel the drive mapping and it remap, it takes at least 5 minutes to respond. Once it does, and the directory on the hub is open, it seems OK, so there must be a problem with the initial comms that is delay things?
Curiously, sound when reasonably fast through the web interface.
Any help appreciated - it slowed all 5 computers on my network to the point where I'm about to turn off.
Okay, I think I got this insult out.
Seems XP or media center can not handle if you have many files in the \\mediahub\media\music directory. I had about 2500 files as well as dozens of directories in the music folder. So I moved all the files one level down (a deep folder) as the music folder. Instantly the music opened in about 2 seconds - low 90 seconds.
I had also turned off file sharing / print and a few other things, but I don't think it helped - I've got turn them back on and see.
So, the moral of the story is, break your music in folders rather than have a squillion MP3s at the level of the music root folder.
Hope this helps someone else.
-
Cannot access a local network of off Site 2 Site VPN
I have cisco ASA 5515-X and 8818 cisco router device
I configured vpn site-to-site. the cisco ASA is a new device but the router is a device in another location and contain several tunnel work, now the tunnel is up but I can't ping LAN on the site of the ASA firewall and some time tunnel at the end of the asa will disappear while it will show again at the end of the router
Here is the config of the SAA.
# show running-config
: Saved
:
ASA 9.1 Version 2
!
CITGroup hostname
activate the encrypted password of V9WHcFD3Zaeul5Lr
names of!
interface GigabitEthernet0/0
nameif outside
security-level 0
address IP A.A.A.A 0.0.0.0
!
interface GigabitEthernet0/1
nameif inside
security-level 100
address IP B.B.B.B 0.0.0.0
!
interface GigabitEthernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
management only
nameif management
security-level 100
IP 192.168.1.1 255.255.255.0
!
boot system Disk0: / asa912-smp - k8.bin
passive FTP mode
network obj_any object
subnet 0.0.0.0 0.0.0.0OFFICE of extended access list permit ip (IP local ASA) (local IP of the router)
outside extended access list permit tcp any any eq ssh
outside allowed extended access list tcp any host (local IP address of ASA) eq ssh
outside extended access list permit icmp any one
outside extended access list permit tcp host (the router's local IP) host (local IP address of ASA) eq sshpager lines 24
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
management of MTU 1500
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 713.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
Route outside 0.0.0.0 0.0.0.0 D.D.D.D 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.1.0 255.255.255.0 management
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set esp-aes-256 TEST esp-sha-hmac ikev1
Crypto ipsec pmtu aging infinite - the security association
crypto map outside_map 1 is the OFFICE address
card crypto outside_map 1 set k.k.k.k counterpart
outside_map 1 set transform-set TEST ikev1 crypto card
outside_map interface card crypto outside
trustpool crypto ca policy
Crypto ikev1 allow outside
IKEv1 crypto policy 1
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 2
preshared authentication
3des encryption
md5 hash
Group 2
lifetime 28800
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 0.0.0.0 0.0.0.0 inside
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
management of 192.168.1.2 - dhcpd address 192.168.1.254
enable dhcpd management
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
username admin password encrypted JtdUVwNnMzvEjPfJ
nairtime Fyp1BJjsayu55viz username encrypted password
tunnel-group k.k.k.k type ipsec-l2l
k.k.k.k group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:e658de2652c6702c61a0cc854a47415f
: endYou are missing a nat exemption, follow the example below, replace IP subnet object-group, depending on your environment.
object-group network local-ASA-lan
object-network 10.10.1.0 255.255.255.0object-group network remote-router-lan
object-network 10.200.0.0 255.255.255.0NAT source (indoor, outdoor) static local-ASA-lan lan-ASA-local destination distance-router-lan lan-router-remote control no-proxy-arp static
Thank you
Rizwan James
-
Cannot see SIN on my local network by its name (Linksys EA4500)
Hello
I just bought a new EA4500 and implemented at home. Most of the stuff worked like a charm, except one. I don't see my NAS Synology on my network domestic byt its name.
I have the router connected to the internet (local ISPS, PPPoE). I have the NAS connected by wire, two Windows 8 PCs connected wireless. There is also a TV (wired connection), a printer, some phones Windows and heightens. One of the PC does not see the SIN (the other can). It can connect to it by its IP address (in the browser, by ping), he can see his Media Server (I can play the music of the NAS in my Media Player), the TV sees the SIN as a DLNA media server... But the PC does not see the NAS by name.
If I have a list of the devices connected on the router, I can see the NAS and its name. But the PC can't. What's wrong?
Both computers have enabled file sharing. I have same SSH was to the NAS ind successfully ping the PC by name. For full disclosure, the PC has VMWare installed with the Windows 7 virtual machine.
I does no settings to the router other than using the Cisco Connection Wizard and disabling wifi comments.
Thank you very much for your suggestions.
Thank you. Any reboot didn't help. It happed to resolve itself eventually. I've been playing with the wifi and FIPS set parameters (and not defined). Then it worked. No idea if it was a coincidence.
-
Unable to access the local network with VPN with some ISPS
Hello
We have a VPN Remote Access IPSEC with an ASA5505. Install VPN it correctly but can not access the inside or the ASA to my office.
But at home with another Internet service provider, it works! You can access inside.
We are trying with other ISP and it works with 2 and does not work with the other 2!
Office we also have an ASA5505, but we have another VPN other sites that work properly.
Any ideas?
Thank you and sorry for my English.
Add...
ISAKMP nat-traversal crypto
That should do the trick! Please rate if this can help.
-
secondary use on local network
Hello!
Is it possible to use secondary on LAN?
I found a same topic, but there was only a suggestion to use the remote control...
BTW, is it possible? or not?
A secondary and a remote control are two different beasts. A school is not an independent entity - it's a front VI oppose and as such must reside on the façade of a VI. That it cannot be used on a local network. The VI which houses the high school, however, can be.
-
Simulator of impossible to connect to the local network services
Hi all.
I'm sure this has been answered somewhere, but I can't.
I have the sim card of the installed 0.9.3 Playbook and (especially) work. It accesses the internet just fine, apps to load and run thin.
However, what I can't do is access of local network services. I tried even by its IP address and just make mistakes.
I don't have a DNS server on my local network right now, but could create one, if it helps.
Any suggestions?
Hey,.
try to change the adapter settings in your VMware Player for 'bridge' and restart it. This will give you an actual IP your simulator of the router connecting all your networked computers and the Simulator and he will be treated like any other computer. hope that helps. Good luck!
-
ASA 5505 VPN remote cannot access with my local network
Hello guys, I have a problem with my asa 5505 remote VPN access to the local network, the VPn connection works well and connected, but the problem is that I can't reach my inside connection network of 192.168.30.x, here's my setup, please can you help me
ASA Version 8.2 (1)
!
!
interface Vlan1
nameif inside
security-level 100
192.168.30.1 IP address 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 155.155.155.10 255.255.255.0
!
interface Vlan5
No nameif
no level of security
no ip address
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
inside_nat0_outbound list of allowed ip extended access any 192.168.100.0 255.255.255.240
pager lines 24
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
IP local pool vpn-pool 192.168.100.1 - 192.168.100.10 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
Mull strategy of Group internal
attributes of the Group mull strategy
Protocol-tunnel-VPN IPSec
username privilege 0 encrypted password eKJj9owsQwAIk6Cw xxx
VPN-group-policy Mull
type mull tunnel-group remote access
tunnel-group mull General attributes
address vpn-pool pool
Group Policy - by default-mull
Mull group tunnel ipsec-attributes
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
!
global service-policy global_policy
context of prompt hostname
Yes, you will need to either configure split tunnel so that internet traffic goes out through your local Internet service provider, GOLD / directed by configuration current you are tunneling all traffic (internet traffic Inc.) to the ASA, then you will need to create NAT for internet traffic.
To set up a tunnel from split:
split-acl access-list allowed 192.168.30.0 255.255.255.0
attributes of the Group mull strategy
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split-acl
I hope this helps.
-
Cannot access the local admin page after first start
Hello
I am not able to access my newly purchased RN202, SN 45Y2535W003FC. I just plugged the power cable and turned on, but the power light keeps blinking even after hours. The NAS will connect to my local network with the ip 192.168.178.32 and ends by RAIDar under this address. However, the local admin under https://192.168.178.32/admin and https://192.168.178.32 page (even with http://) is not accessible. The connection is not accepted (cannot be connect-page in the browser). Also access more ReadyCLOUD is not possible, because the NAS cannot be discovered. Currently, there are no hard drives in the NAS. I also tried to insert a HARD disk already formatted in combination with a factory reset, but it does not work with the same result. It's already a replacement unit by my retailer the first device showing the same behavior, so I excluded a technical defect. What I am doing wrong? Any help would be greatly appreciated.
Best regards
Patrick Schmidt
OK I found the solution by myself. Without a HARD disc inserted the NAS will not start correctly. As mentioned, I already tried to insert a HARD drive and then do a factory reset. Now, I saw that I have is to not properly place the HARD disk. If you open the lock on the grid (the thing in which you put the HARD drive), then you can not insert in the case completely and do not connect the connector of power und data. Maybe a little more detailed manual on it (for Dummies like me) would be useful. Argh...
-
AnyConnect client can not access local network
Hello
I have a problem with the Cisco anyconnect. Once clients are connected they cannot access anything whatsoever, including their default gateway.
Pool of the VPN client is on the same subnet as the LAN (139.16.1.x/24). Local network clients can access DMZ, VPN clients can ping computers on the local network, but they cannot access the DMZ.
I guess that any rule providing that traffic is absent but I m new with Cisco ASA and I m totally lost. I read as much as I could on this topic, but I do not understand which rule is necessary.
Thank you very much in advance for your support.
ASA release 9.4 (1)
!
ciscoasa hostname
activate the encrypted password of WmlxhdtfAnw9XbcA
TA.qizy4R//ChqQH encrypted passwd
names of
mask 139.16.1.50 - 139.16.1.80 255.255.255.0 IP local pool Pool_139
!
interface GigabitEthernet1/1
nameif outside
security-level 0
192.168.1.100 IP address 255.255.255.0
!
interface GigabitEthernet1/2
nameif inside
security-level 100
IP 139.16.1.1 255.255.255.0
!
interface GigabitEthernet1/3
nameif DMZ
security-level 50
IP 172.16.1.1 255.255.255.0
!
interface GigabitEthernet1/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet1/5
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet1/6
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet1/7
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet1/8
Shutdown
No nameif
no level of security
no ip address
!
Management1/1 interface
management only
nameif management
security-level 100
11.11.11.11 IP address 255.255.255.0
!
passive FTP mode
network obj_any object
subnet 0.0.0.0 0.0.0.0
internal subnet object-
139.16.1.0 subnet 255.255.255.0
network dmz subnet object
subnet 172.16.1.0 255.255.255.0
wialon Server external ip network object
Home 192.168.1.132
wialon-Server network objects
Home 172.16.1.69
Wialon-service-TCP object service
destination tcp source between 1 65535 21999 20100 service range
Wialon-service-UDP object service
destination service udp source between 0 65535 21999 20100 range
network of the NETWORK_OBJ_139.16.1.0_25 object
subnet 139.16.1.0 255.255.255.128
outside_acl list extended access permit tcp any object wialon-Server eq www
outside_acl list extended access allowed object Wialon-service-TCP any wialon-server object
outside_acl list extended access allowed object Wialon-service-UDP any wialon-server object
pager lines 24
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 DMZ
management of MTU 1500
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
NAT (inside, outside) static source any any static destination NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 non-proxy-arp-search to itinerary
!
network obj_any object
dynamic NAT (all, outside) interface
internal subnet object-
NAT dynamic interface (indoor, outdoor)
wialon-Server network objects
NAT (DMZ, external) service wialon Server external ip static tcp www www
Access-group outside_acl in interface outside
Route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
identity of the user by default-domain LOCAL
Enable http server
http 11.11.11.0 255.255.255.0 management
http 139.16.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
service sw-reset button
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
domain name full ciscoasa.srdongato.null
E-mail [email protected] / * /
name of the object CN = srdongato
Serial number
Proxy-loc-transmitter
Configure CRL
Crypto ca trustpoint ASDM_Launcher_Access_TrustPoint_0
registration auto
full domain name no
name of the object CN = 139.16.1.1, CN = ciscoasa
ASDM_LAUNCHER key pair
Configure CRL
trustpool crypto ca policy
string encryption ca ASDM_TrustPoint0 certificates
certificate 09836256
30820381 30820269 a0030201 02020409 83625630 0d06092a 864886f7 0d 010105
05003050 31123010 06035504 03130973 72646f6e 6761746f 313 has 3012 06035504
05130b4a a 41443139 32323033 34343024 06092, 86 01090216 17636973 4886f70d
636f6173 612e7372 646f6e67 61746f2e 6e756c6c 31353132 30353036 301e170d
5a170d32 33333535 35313230 32303633 3335355a 30503112 30100603 55040313
09737264 6f6e6761 30120603 55040513 31393232 30333434 0b4a4144 746f313a
2a 864886 30240609 f70d0109 6973636f 02161763 6173612e 7372646f 6e676174
6f2e6e75 6c6c3082 0122300d 06092 has 86 01010105 00038201 0f003082 4886f70d
010a 0282 010100d 2 295e679c 153e8b6a d3f6131d 8ea646e3 aa0a5fa9 20e49259
ca895563 7e818047 033a4e8f 57f619e9 fa93bfd5 6c44141f b0abf2c0 8b86334e
bac63f41 99e6d676 c689dcf7 080f2715 038a8e1b 694a00de 7124565e a1948f09
8dbeffab c7c8a028 741c5b10 d0ede5e9 599f38fe 5b88f678 4decdc4b b 353, 6708
cfa2fbce f58be06e 18feba56 4b2b04a1 77773ec6 5c58d2ed d7ca4f17 980f0353
138bfe65 1b1165e6 7b6f94bb ab4d4286 e900178c 147a6dba 2427f38e e225030f
0a66d1eb 5075c57e 6d77e5bb 247f5bc3 8d3530f0 49dedf2d 21a24b5f daa08d98
690183cf e82a6b8d 5e489956 c5eecdbc 7fc2365c b629a52b 126b51e2 18590ed5
c9da8503 a639f102 03010001 a3633061 300f0603 551d 1301 01ff0405 30030101
ff300e06 03551d0f 0101ff04 86301f06 04030201 23 04183016 80143468 03551d
dec79103 0a91b530 1ada7e47 7e27b16d 4186301d 0603551d 0e041604 143468de
c791030a 91b5301a da7e477e 27b16d41 86300d 86f70d01 01050500 06 092 a 8648
003cdb04 03820101 8ef5ed31 c05c684b ad2b0062 96bfd39a ecb0a3fe 547aebe5
14b753e7 89f55827 3d4e0aa8 b8674e45 80d4c023 8e99a7b4 0907d 347 060a2fe4
fa6e0c2f 3b9cd708 a539c09f 7022d2ee fb6e2cf6 82b0e861 a2839a71 1512b3ec
e28664e9 732270c 9 d1c679d9 1eaf2ad5 31c3ff97 09aae869 88677a3d b 007, 5699
ecb3032e 2dd0f74f 81f9a8fb 79f30809 723bbdbf dfef4154 5ad6b012 a8f37093
481fa678 b44b0290 23390036 042828f3 5eefdc43 ebe52d26 78934455 9b4234a9
4146 166e5adc b431f12f 8d0fbf16 46306228 731c bfeebc43 34 76984 d2e6ebbc
88ca120a 96838694 d4f32884 963e7385 987ec6b0 dfa28d49 05ba5fa8 641bcfc7
ff92ac3c 52
quit smoking
string encryption ca ASDM_Launcher_Access_TrustPoint_0 certificates
Certificate 0 is 836256
308202cc a0030201 0202040a 0d06092a 83625630 864886f7 0d 010105 308201b 4
05003028 06035504 03130863 61736131 13301106 03550403 6973636f 3111300f
130a 3133 392e3136 2e312e31 31353132 30353036 35363236 5a170d32 301e170d
35313230 32303635 3632365a 30283111 55040313 08636973 636f6173 300f0603
61311330 11060355 0403130 3133392e 31362e31 2e313082 0122300d 06092 has 86
4886f70d 01010105 00038201 0f003082 010 has 0282 010100e7 a5c16e86 16c15a10
e018b868 bac7271a 30f1a3f8 ecb9c6b8 3ed4b1ad c9468f5e 287f2a7a 644f1496
c43a061e da927d09 a755b53e ed7c6a66 f2f1fb1e f944345c 86e08ce0 891c99b3
13101ab3 04963fad f91f987f 99f22a89 cd1e8c5a 5e4c026d 2cadd7b7 6620bbd1
b4a5135b 24ec886f fa061a06 dd536e96 1e483730 756c 4101 23f83a8d 944a7fbe
93c51d56 32ac0d17 ceb75f63 0ae24f07 f2c54e83 5b84ff00 16b0b899 c925c737
1765b 066 23 b 54645 bc419684 d09dd130 c1479949 68b0a779 df39b078 6fb0deb9
758b14c3 f0801faf f0ad60e1 a018ffba d769f867 3fe8e5fc 88ccc5b2 2319f5d4
617a78c4 74e7a64b 5c68276c 06ea57c1 d0ffce4b 358c4d02 03010001 300 d 0609
2a 864886 05050003 82010100 dff97c9f 4256fd47 8eb661fd d22ecea4 f70d0101
589eff09 958e01f1 a435a20e 5ed1cf19 af42e54d d61fc0ab cb2ee7ac 7fcb4513
1a44cc86 1e020d72 3a3f78d2 4 d 225177 857093d 9 f5fcf3c7 6e656d2b 54a0c522
f636b8cf 33c5ae34 ea340f32 85dff4c1 50165e7a e94de10b ced15752 0b3a76c1
2a50777b 20291106 a1a8a214 a 8 003716 680c15d4 ac3f7cc7 378f8f5f 38e3403f
f958c095 e549c8ed 4baf8cc5 bdcd230e 260754ea 953c3a4c eb01fef5 62b97e01
9f82ce6b f479dbdd 000c45af 8758b35f b4a958ee 32c4db3f 2ddc7385 dc05b0e3
78b609ba a9280841 2433ae87 5dd7a7c2 d5691068 1dc0eddc c23f99c5 3df8b1a5
aadbd82a 423f4ba8 563142bf 742771c 3
quit smoking
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 activate out of service the customer port 443
Crypto ikev2 access remote trustpoint ASDM_TrustPoint0
Telnet 139.16.1.0 255.255.255.0 inside
Telnet 11.11.11.0 255.255.255.0 management
Telnet timeout 5
without ssh stricthostkeycheck
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
dhcpd outside auto_config
!
dhcpd address 172.16.1.69 - DMZ 172.16.1.69
dhcpd dns 87.216.1.65 87.216.1.66 DMZ interface
dhcpd option 3 ip 172.16.1.1 DMZ interface
dhcpd enable DMZ
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL-trust outside ASDM_TrustPoint0 point
SSL-trust ASDM_Launcher_Access_TrustPoint_0 inside point
Trust ASDM_Launcher_Access_TrustPoint_0 inside the vpnlb-ip SSL-point
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-3.1.12020-k9.pkg 1
AnyConnect profiles Wialon_client_profile disk0: / Wialon_client_profile.xml
AnyConnect enable
tunnel-group-list activate
Disable error recovery
internal GroupPolicy_Wialon group strategy
attributes of Group Policy GroupPolicy_Wialon
WINS server no
value of 192.168.1.1 DNS server
client ssl-VPN-tunnel-Protocol ikev2
by default no
WebVPN
AnyConnect value Wialon_client_profile type user profiles
dynamic-access-policy-registration DfltAccessPolicy
wialon_1 Wy2aFpAQTXQavfJD username encrypted password
wialon_2 4STJ9bvyWxOTxIyH encrypted password username
remote access to Wialon tunnel-group type
attributes global-tunnel-group Wialon
address pool Pool_139
Group Policy - by default-GroupPolicy_Wialon
tunnel-group Wialon webvpn-attributes
enable Wialon group-alias
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:447ec315ae30818a98f705fb1bf3fd75Hello
You don't have NAT exemption the DMZ network to the pool of VPN traffic.
Please try to add the following statement to run:
nat (DMZ,outside) 1 source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 route-lookup
Also please delete the existing instruction manual nat "non-proxy-arp" statement, because it can cause problems like you the ip subnet address pool is identical to that of the Interior of the network.no nat (inside,outside) source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 no-proxy-arp route-lookup nat (inside,outside) 1 source static any any destination static NETWORK_OBJ_139.16.1.0_25 NETWORK_OBJ_139.16.1.0_25 route-lookup
Cordially Véronique -
VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK
I tried to set up a simple customer vpn using this document
VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK BEHIND "RA"...
6.3 (5) PIX version
interface ethernet0 car
Auto interface ethernet1
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
activate the encrypted password of VmHKIhnF4Gs5AWk3
VmHKIhnF4Gs5AWk3 encrypted passwd
hostname VOIPLABPIX
domain voicelab.com
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
access-list 101 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 101 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 102 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0
access-list 102 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0
pager lines 24
Outside 1500 MTU
Within 1500 MTU
IP address outside 208.x.x.11 255.255.255.0
IP address inside 172.10.2.2 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
IP local pool voicelabpool 172.10.3.100 - 172.10.3.254
history of PDM activate
ARP timeout 14400
NAT (inside) - 0 102 access list
Route outside 0.0.0.0 0.0.0.0 208.x.x.11 1
Route inside 172.10.1.0 255.255.255.0 172.10.2.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
http 172.0.0.0 255.0.0.0 inside
http 0.0.0.0 0.0.0.0 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
Crypto ipsec transform-set esp-aes-256 trmset1, esp-sha-hmac
Crypto-map dynamic map2 10 set transform-set trmset1
map map1 10 ipsec-isakmp crypto dynamic map2
client authentication card crypto LOCAL map1
map1 outside crypto map interface
ISAKMP allows outside
ISAKMP identity address
part of pre authentication ISAKMP policy 10
ISAKMP policy 10 encryption aes-256
ISAKMP policy 10 sha hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
vpngroup address voicelabpool pool cuclab
vpngroup dns 204.x.x.10 Server cuclab
vpngroup cuclab by default-field voicelab.com
vpngroup split tunnel 101 cuclab
vpngroup idle 1800 cuclab-time
vpngroup password cuclab *.
Telnet timeout 5
SSH 208.x.x.11 255.255.255.255 outside
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 172.10.1.2 255.255.255.255 inside
SSH timeout 60
Console timeout 0
username labadmin jNEF0yoDIDCsaoVQ encrypted password privilege 2
Terminal width 80
Cryptochecksum:b03a349e1ac9e6022432523bbb54504b
: end
Try to turn on NAT - T
PIX (config) #isakmp nat-traversal 20
http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml#Solution1
HTH
Maybe you are looking for
-
I can ' use my computer (broken screen)
Hello evrybody I have a complicated proplem my laptop screen is broken and I use it with an external screen but my proplem now that I changed accedently output VGA option and I can't get it back on the screen outside as I don't see what happens when
-
I have 200 + channels to settle permanently, at a rate of 10 Hz. The client requires an AVERAGE value of each channel, between a START time and a STOP time, perhaps several minutes apart. What I do is put a COUNT to 0 and clear a buffer [] SUM of 200
-
How can I recover my laptop stolen
The police caught the guy.
-
How do I move focus left/right/up/down
Imagine that you have created a customized with 5 place BitmapFields Manager placed like this: ..... [ ] [ ] [X] [ ] ..... [ ] where 'X' represents the selected field. Now normally, if you move the trackball, the focus would go in linear order in
-
When I was younger, and I wanted to play again for some reason, I've played the game age of Mythology. I spent some time making the installer to make it work, then I tried to play the game. As the intro to fantasy has been done and the main menu was