Connection of two curved lines seamlessly

Similar Questions

• How to connect 2 different adsl2 + line by different ISP

  How to connect 2 different adsl2 + line by different ISP. We have two LANs, but we have just a printer and we want to share this printer. We have two different line ADSL but different ISP. How can we achieve this?

  Hello

  It is necessary to create the VPN connection.

  You have Windows XP Professional where your printer is installed and connected?

  If so, you can create VPN server in Windows XP Professional PC, wherever your printer is connected. Here's how:

  http://www.zdnetasia.com/configure-Windows-XP-Professional-to-be-a-VPN-server-39050037.htm

  Then, you need to configure modem ADSL (corresponding to your printer) - set port forwarding for port 1723 (PPTP) to the computer with the VPN server.

  You have to find your public IP address of the network where is installed printer - you can see in the ADSL modem (from configuration pages WWW) or open this page in the computer where is installed your printer:

  http://www.whatismyip.com/

  and you will see your public IP address.

  Then what to do – change one different internal subnet network - if one network has 10.0.0.0/24 second network must have another network addressing, for example, 10.0.10.0/24.

  And now set up connection on the computer you want to print - create the VPN connection to connect to the VPN server:

  http://support.Microsoft.com/kb/314076/en

  item 11. -write the public IP address.

  Name and password - use the user and the password of computer with WinXP Pro VPN server, which has the permition to incoming VPN connections.

  After successfully completing the VPN connection - click on Start - run and write \\x.x.x.x , where x.x.x.x is the IP address of the computer with printer and click OK. You'll see printers and shared files. Choose the printer share name and click on the name - the printer will install the drivers and then you can print a test page to the printer print test.

  LC

• Corner of mitre of two different line thicknesses

  Can someone advise please how to clean a corner with two different line thicknesses? When I Zoom lines mitre not as you wish, they both just to finish. The lines are a 10 PT and pt 2, drawn at the intersection at 135 degrees.

  Thank you very much

  Because they are not connected and have different stroke widths you can not get an angle.

  Convert the path traced thick contours (object > path > Outline Stroke) and adjust the end.

• Connectivity between two nodes of Virtual Box

  For a few days, I try to establish the network connectivity between two nodes OEL (Oracle Enterprise Linux) in Oracle Virtualbox. I tried everything I have found Google, but still nothing works, everytime I try to ping from one node to another node Hostname/IP is showing unknown host. All the advice everyone here will be great for me.
  
  Published by: 918868 on October 30, 2012 02:30

  When you create a virtual machine, by default VirtualBox allows virtual network card and selects the "Network Address Translation" (NAT) mode for it. In this way the guest can connect to the outside world using the networking of the host and the outside world can connect to services on the feedback that you choose to make visible outside of the virtual machine.

  This default configuration is good probably 95% of users of VirtualBox. VirtualBox is, however, extremely flexible in how it can virtualize networks. It supports multiple virtual NICs per virtual machine, the first four that can be configured in detail in the Manager window. Additional network cards can be configured on the command-line with VBoxManage.

  Source: http://www.virtualbox.org/manual/ch03.html#settings-network

  For more details, please see:

  Virtual networks
  http://www.VirtualBox.org/manual/CH06.html

  Concerning
  Girish Sharma

• Connect the two spreadsheets through a pl/sql function registered

  Hello
  Need help to connect the two worksheets using a stored function.
  
  Step 1:
  Created a function * (test_global) Pl/SQL * in which a table * (TWG) global * is inserted with lines based on criteria (via a call to a pl/sql procedure packed).
  The function returns the number of rows in the global table or 0 if no row is returned.
  The TWG was created using "On Commit preserve rows.
  
  Step 2:
  The function test_global has been saved to the Finder via the "PL/SQL functions to register.
  
  Step 3:
  Create a spreadsheet calculation - & gt; Sheet1 and included a Calculation (calc_global) that calls the test_global function.
  
  Step 4:
  Add another sheet of calculation - & gt; Sheet2 based on a query to select lines in the TWG where calc_global & gt; 0
  
  Step 5:
  Refreshed Sheet1 - & gt; displays the number of rows as * 5119 *.
  Refreshed Sheet2 - & gt; takes some time to run but returns no data
  
  Tried to:
  ) a calc_global link on Sheet1 with the help of sheet 2 links management, this does not work either
  (b) changed using the Pragma autonomous transaction function; gives an error that says no data returned by 1 sheet Sheet2.
  
  Please help with a solution, it seems that there are data in the TWG at the time Sheet1 is running need to display data in the sheet2 worksheet.
  
  Thanks in advance
  SP

  Hello

  You need to call test_global function once on Sheet1 that fit lines within the TWG. In Sheet2, you simply select the TWG and do not have the conditions of anywhere in this form. Try to run Sheet2 without calc_global > 0.

  Rod West

• Is it possible for a line chart display curved lines between the points?

  We have a demand interesting to build a line chart in OBIEE, where the points on the graph are connected by curved lines instead of the normal straights. The best way to describe it would be "serpentine". I saw this in a Cognos report, but I do not know if OBIEE for this. Maybe a setting in line.pcxml? Any ideas?

  Currently, we do not provide the organizational chart. Both options, you have to connect the dots in a line chart are either via a straight line or a curve of the step. A curved line would essentially be a form of a spline, with suitable smoothing algorithms.

  Rgds,
  Afonso
  BI product management

• My MBP boot with two horizontal lines at the start

  Hello

  I have a Macbook Pro (15 "mid 2015).

  2.5 GHz Intel Core i7

  OS X El Capitan

  (1) my MBP boot with two horizontal lines on a black screen after the apple logo.

  (2) sometimes the screen suddenly became all glitch on the dry mouse 5-7 (2 - 3 times a day) the cursor moves and CPU rises from 4% to 13%

  

  What I did, reset the SMC, check mac by TechTool 8 - is shows OK.

  Please help, what happens? Someone at - it experience of something similar?

  Thanks for any help,

  Ivan

  Try a reset of the NVRAM:

  https://support.Apple.com/en-us/HT204063

  Ciao.

• My verse ATT modem (non apple devices to use this modem} is connected to the ATT line, Time Capsule (iPhones, Macs Time Capsule use) via ethernet Uverse.) Non apple devices can collect data from iPhones or Mac using the time Capsule?

  My verse ATT modem ({use of devices not apple wifi of this modem} is connected to the ATT line, Time Capsule (iPhones, Macs use the wifi of the time Capsule) and connect to the Uverse modem via ethernet.)

  Both devices are set to the highest security and each uses separate passwords.

  Non apple devices can collect data from iPhones or Mac using the time Capsule?

  With a bit of work by someone who knows how to do such things, not Apple computers could read some files on the Mac if file sharing is configured on the network... devices non-Apple and... He knew the device passwords or administrator for Macs.

  Mac could also play the files on other Macs if file sharing has been implemented and the device password or admin was known.

  If you ask if a PC can read the files on the Time Capsule, the answer is Yes, without doubt, assuming that the PC knew the password of device for the time Capsule.

• Try to set up a direct parallel connection between two computers in Windows XP Home edition

  I tried to set up a direct parallel connection between two computers in Windows XP. I have the right cable (CAT 5 Ethernet connection) and you can set up the connection on my own laptop, but when I go through the installer on another laptop it create new connection-establishment of advanced connection--> when the next window opens asking me to choose between "accept incoming connections" and "connect directly to another computer" (which I need to select) for the second option is grayed out and not can not be selected.

  The same thing happens when I try to implement the same connection between my laptop and the desktop we have. All of these computers are running on Windows XP service pack 2. I really need help with this because I'm about to start pulling my hair.

  Any help would be very, very, much appreciated.
  Thank you

  Hello

  Check it please this subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3423&messageID=11170

  I hope this will help you.

• Can damage the FPGA module if I connect accidentally two pins writing together.

  My current configuration has a PXI chassis with two FPGA modules.  Each FPGA module has an adaptation Module 6581 on that.  I would like to test the signal through my system path by having the user to move some cables that would be a reason for a return to the other looping FPGA.

  I fear, however, the risk of the user is not correctly as shown and somehow a channel available in writing that connects to another channel write-enabled.  This damage to the FPGA or adaptation modules?

  Hi Brian,.

  Your concerns are correct. We never want to connect two pins that are output voltage. If two pins are outputs digital mistakenly connecting them together may damage one or both nodes in output since there is nowhere to flow the potential.

  It is well to connect to two pins that read a voltage. If both pins running entry digital (reading of the pins), as there is no risk, nor pin would be likely to be damaged.

• Two vertical lines on my LCD screen

  Please, help me...

  Two vertical lines about 2 inches, width is one black and one white.

  They appear on my lcd screen in the middle of the left since the start. Always in the same position.

  Later, when the desktop appears, we the black remains black and a white becames an occasional color (or a combination of several mobile colors).

  I tried to use an external monitor, and I didn't have the problem.

  I tried with 'doctor test' PC hardware, but all the tests have been adopted.

  I would understand if the problem is the video driver, the LCD, the joint between the GPU and the motherboard, or the lcd. If the GPU is the problem, can I replace it without changing the motherboard or not?

  My PC is Thinkpad R60 9461-DXG and he is 2 years old.

  My BIOS version is 7CETD2WW (2.22)

  My OS is Windows XP pro SP3.

  My GPU is ATI Radeon X 1400

  My version of the video driver is 8.442.3.0 03/01/2008

  You can try replacing the cable of the screen first, then if that doesn't work the LCD.

  The manual on how to do these replacement is here.

  http://www-307.IBM.com/PC/support/site.WSS/MIGR-64200.html

• Fax HP Photosmart C410 connects to the telephone line at home instead of the dedicated fax number

  I have a Photosmart C410a.  The machine must be connected to the dedicated fax line, and number of this line was introduced in the fax header.  However, when tested using the FaxBack Service, fax back called the conduct of the House instead of connected to the fax line.  The machine is connected directly to the wall and there is no dispatcher, etc., with the home phone.  The telephone number doesn't have to all be typed them into the C410a.  Any thoughts you may have on what might be happening would be greatly appreciated.

  Best,

  Scott

  RESOLVED: The problem has been an error with the FaxBack service - my camera was working normally.  The best way to test your machine is either send/receive a fax with a friend or with HP customer support.

• can I send a fax without connecting to a phone line

  I plan to move to a 'verizon wireless' home phone that does not support faxes... Is there a way I can send a fax from my HP Officejet printer all-in-one without connecting to a phone line?

  Hello
  Unfortunately, it is not possible. Need to connect both devices to send a fax.

• The smartwatch can connect with two phones

  I am looking to buy Sony smartwatch, and since I have two android phones, I was wondering if it would be able to view the notifications from two phones?

  See you soon,.

  Dimitar

  Smart Watch can not be connected to two phones at the same time. So it will not be able to view notifications from two phones.

  What are your thoughts on this forum? Let us know by making this short film survey.

• Two leased lines

  Hai guys,

  I have two leased lines, and I have two routers in each location.can that I use two lines at the same time rented. If it is possible how to configure that. Please help me.

  Hai,

  In fact, my requirement is between the locations links never fails. That's why we want to use two lines leased between two locations. Whenever a link falls down this day there another link should appear automatically without manual deducted. How we can configure routers with a single door of entry. We have two series 2800 router also for each location. How I need to plug these routers physically.