How to connect 2 different adsl2 + line by different ISP

Similar Questions

• How to connect Apple TV to two different amplifiers?

  How to connect Apple TV to two different amplifiers?

  If you're talking about AppleTV 4 then there a single HDMI output only.

  You need either a HDMI switch or a divisor of direct HDMI to different amps (may not work at the same time due to HDCP) or see if an amp offers HDMI or optical output to the other depending on whether or not you want to distribute audio or video to the 2 amp.

  If you need a splitter/switch, it's an extra box and you might consider only 2 AppleTV, don't forget a rental on one will not be seen on the other.

• How can I get information off my office on my laptop when firewire connections are different?

  I have an old desk (2007) that won't start, it turns on but then stops. I went to Apple and they advised me to connect my computer laptop (2013)

  on my desktop with the firewire connection. My problem is the firewire ends are not the same on both computers.

  Laptop has HDMI and the Office has a connector with many small holes? (not tech saavy)

  I want to know how to connect the too to retrieve my information?

  You use a FireWire 400 to 800 adapter and/or a FireWire 800 adapter Thunderbolt.

  (141798)

• My verse ATT modem (non apple devices to use this modem} is connected to the ATT line, Time Capsule (iPhones, Macs Time Capsule use) via ethernet Uverse.) Non apple devices can collect data from iPhones or Mac using the time Capsule?

  My verse ATT modem ({use of devices not apple wifi of this modem} is connected to the ATT line, Time Capsule (iPhones, Macs use the wifi of the time Capsule) and connect to the Uverse modem via ethernet.)

  Both devices are set to the highest security and each uses separate passwords.

  Non apple devices can collect data from iPhones or Mac using the time Capsule?

  With a bit of work by someone who knows how to do such things, not Apple computers could read some files on the Mac if file sharing is configured on the network... devices non-Apple and... He knew the device passwords or administrator for Macs.

  Mac could also play the files on other Macs if file sharing has been implemented and the device password or admin was known.

  If you ask if a PC can read the files on the Time Capsule, the answer is Yes, without doubt, assuming that the PC knew the password of device for the time Capsule.

• How to connect a TOSHIBA 28W23 to the other PC?

  I posted this on a number of sites different forum but no one really knows the answer.
  Thus, its what

  If I have an old TOSHIBA 28W23 - how it connectable to an other PC gx270s?

  If someone has any advice id love it.

  It depends on the ports/plugs available.

  Don t know both devices but maybe your laptop supports a SCART.
  In this case you must use a cable SCART.
  Is the computer supports s-video port? If Yes, then you can use a cable SCART-s-video to connect the two devices.

• How to connect to the internet via the wireless?

  I just bought my first laptop Toshiba L10, and I'm unable to start, how do I connect to the internet using the wireless feature and no track? More frustrating is how can I connect to the internet in the first place, wireless.
  Help, please.

  Hi Phil,

  To answer your questions in full, it would be quite a task but here is my simple guide: -.

  1. connect to the internet

  1.1 choose an ISP (provider of Internet Sertvice) and get a CD with the software and the connection information.

  1.2 load the CD and follow the onscreen instructions to set up your login information.

  1.3 If you use dial-up connect your cable modem to your laptop and the other end to your telephone line.

  1.4 If you are using broadband services to connect your CODEC to your USB port and the other cable to your microfilter attached to your telephone line.

  1.5 DO NOT START YOUR INTERNET CONNECTION UNLESS YOU HAVE ANTIVIRUS RUNNING ON YOUR LAPTOP.

  1.6 Click START-> CONNECT TO-> the connection created in 1.2 above

  For the wireless connection, the procedure is similar braodly but you need a router or wireless modem connected to your telephone line and properly configured in Notepad you.

  Follow step 1.5 with a lot of attention. If you connect to the internet without anit-virus software and firewall appropriate, it will be only a few seconds before your laptop computer will be infected with a form of virus. Please be careful.

  HTH

• How to connect the cables to an AMD Radeon HD 7450 video card for two monitors individual work?

  I have a HP Pavilion p6-2360eo with the video card Radeon 7450 connected to a monitor of 23xi Pavilion.

  Now, I want to add a monitor of 23xi more, but I do not understand how to connect the cables to the video card to get two logical screen (different views on each monitor)

  Supposedly this monitor can connect to the video card, you have the HDMI connection.  Assuming that the first monitor is connected via DVI, then try a HDMI cable to the second.  I got this from the description of the video card on THIS page.

  Support up to two displays at the same time in these configurations: DVI, HDMI and VGA + HDMI (using the included adapter cable)

• How to connect satellite Pro L40-15 has to my TV?

  Hello

  I would use the laptop connected to my TV to watch movies. Can be connected using the TV as a monitor and what kind of cable would you use?

  Thank you
  Malc

  To connect the laptop to the TV is very easy. If you look at the user s manuals document you will find exact explanation how proceed.

  If I remember well your laptop should have S-Video output and video signal transfer port, you must use S-video cable. I hope your TV's S-Video IN port. If this isn't the case, you can use different cards.

  Please check this thread and read carefully reading written by Miro. He explained very detailed how to connect the laptop to the TV.

  If you have any other questions please post again.

• How to connect signals Ni SCB - 264 X

  We bought PXI switch 2532 with TB-2641. We also have
  bought burst of SCB-264 X. I have a question about the signal
  connections. SCB-264 X is supplied with only the connections of signals (C0, C1
  etc). But what of the ground for each signal. How to connect the
  mass of each signal signal.

  Thank you

  Kitenge

  Hi Kitenge,

  The connection TB-2641 block creates a configuration of matrix 8 x 64 1-wire for the NI PXI-2532.

  1 - wire configurations are typically used for single-ended signals: when he shared there or return a common ground.  In these configurations, the constant signal line is usually wired externally (not changed).

  If a part of your application requires switching differential signals (2-wire), you can use an additional column for tracking on the ground of each signal.  Similarly, additional lines are required.

  If all your application passes only signals from 2 threads, then the TB-2643 or TB-2644 may be more appropriate than the TB-2641.

  The connection TB-2643 block creates a matrix 4 x 64 2 wires.

  The connection TB-2644 block creates a 8 x 32 2-wire matrix.

  I hope this helps!

  Chad Erickson
  Switch Product Support Engineer
  NOR - USA

• 6009 USB + encoder Lika I41 - how to connect?

  Hello world

  I'm new to this forum and I'm new to Labview so. I started to learn a few weeks ago and I have to solve a few problems. I am not able to come up with my own, and that is why I ask. I went through very simple LabView courses and now I'm in more serious trouble.

  I have first - the NI USB-6009 device and an incremental encoder Lika I41-h-500ZCU46L2. He has 8-cable and is described here: http://www.lika.pl/pliki_do_pobrania/QR%20I28_I40_I41.pdf . And now - I know the basics on the encoders so the description of cables is understandable to me. I don't know how to connect it to the USB-6009? I need to do a VI that will count the pulses and the output of the camera each X impulses. But I want to start by counting pulses.

  Any help will be MUCH appreciated.

  P.

  Hi you can connect power 5V to encode. Connect to the encoder output to PFI0 encoder for the event USB6009 GND GND line do VI count on PFI0 and USB6009.

• How to connect incremental encoder to NI9411?

  Hello
   
  I need to connect an incremental encoder to a NOR-9411 digital input on a chassis cRIO module to use for high-speed triggering.  I'm having trouble to know how to connect the wires needed to the encoder until the 9411 correctly.

  The son of transport the following signals:
   
  A red
  B Green
  Z Brown
  + V blue
  OV-Orange

  I'm fairly inexperienced with the connection of the sensors to LabVIEW gear, then please let me know if I can provide more information on my installation.

  In addition, attached is the datasheet for the encoder.

  Thank you very much!

  Alex

  Hi Byrd,

  Thanks for the post and I hope that your well today.

  I'm afraid I'm not totally sure what is your problem.

  The NI 9411 manual can be found here: for additional reading.

  The manual explains how to connect unbalanced devices on the 9411.

  page 12:

  "An example of asymmetrical device is an asymmetrical encoder. Connect each of the encoder signals (phase A, phase B, and)
  the index) to one of the pins in a pair of pins of DI. Figure 5 shows the connections for an asymmetrical encoder. »

  In labVIEW, you can then create a DAQmx task to read all digital lines.

  Hope this helps to get started you,

• How to connect an additional monitor for the gateway all-in-one?

  Hello you all, I have a question I hope you a lot more smarter computer people can help me with. I have a friend who has a gateway all in one model #-ZX4931. It has a VGA port on the back. It has been also updated for Windows 10. I'm house sitting and dog looking for her in a few weeks

  I want to plug the additional monitor which by the way, it's a Dell (sorry) to work on a project I'am doing right now. I try to use the screen that she has on the All In One and I didn't like how my project came out looking

  I see on the back of its All In One, it has a VGA port. I Google several times and different words from Google, which told me that you cannot plug an additional external monitor for all in one PC, so I'm confused as to why there is a VGA port, if you couldn't plug the external monitor

  in any case, can someone please help me and give me details on how to connect an external monitor, in addition to its gateway all in one model #-ZX4931

  Looking at your specific model, I think you can try to connect an external monitor via the VGA port.

  Once you have connected the secondary monitor using the VGA port, press control + p and main Windows logo if you are able to extend or clone your desktop.

• I use the g5 U800 mobile.i need to know how to connect to internet from my mobile to pc.

  mobile g5 Internet connection for pc

  I use the g5 U800 mobile.i need to know how to connect to internet from my mobile to pc
  Hello
   
  You must have GPRS activated from your network service provider.
  
  To connect the phone to the computer, you need a PC suite installed on the computer. If the phone manufacturers have supplied PC suite CD, then install the software on the computer.
  The operating system on the computer and the mobile phone are different, so communication is not directly.  PC suite software acts as a mediator between the computer and the phone and helps to establish effective communication between the phone and the computer. If the CD is not provided, then look for in PC suite online and download it.
  
  Reference: Connect to the Internet via a mobile phone Bluetooth active
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-the-Internet-using-a-Bluetooth-enabled-mobile-phone
   
  Thank you

• How to connect a portable Sony Bravia TV Vista

  I want to connect my laptop to my tv (Sony Bravia, mod KDF - 50E3000), so that I can read documents of text on the screen or play games on the tv from my laptop.  I bought a HDMI VGA cable and hung the two units through this means of communication.  I also used an "S-vidéo" cable and got a few lines and movement, but no readable signal.  The TV's user manual says to change my signal video output on the laptop, but I can't find where to do.  Can you help me to get this accomplished?

  http://www.GeekWithLaptop.com/how-to-connect-laptop-to-TV

  http://www.online-tech-tips.com/computer-tips/how-to-connect-your-laptoppccomputer-to-your-TV/

  http://www.ehow.com/how_2377831_use-TV-monitor-laptop.html

  Read the info on the links above.

  See if that solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• How to connect multiple entry points?

  I created two entry points for my application according to the examples here and in the SDK documentation.

  Now my question is how to connect these two? I have a few assumptions and suggestions of my own listed below. I would be grateful if someone their checked or provided best practices. Thanks jeff

  -Store PERIOD: this is the method recommended for entry points Exchange State

  -GlobalEvents: need the registerting themselves as listeners globalevent?

  -IPC methods: because they are running in different processes, InterProcessCommunication should apply. The method available only here is a socket

  Using RuntimeStore or GlobalEvents are methods of the IPC. I prefer to use RuntimeStore, but I think the preference prevailing is for GlobalEvents.