connection to control center - default

Similar Questions

• 11R2 how to change IP in OWB_REPOSITORY_LOCATION and the default control center

  We are changing the IP address of the Server repository database OWB. Review of the locations tab, I found the default control center and OWB_REPOSITORY_LOCATION are configured with IP addresses, so I need to change the IP addresses in hostname in both entities. I think that I can not use the OWB_HOME/rtp/sql/UpdateLocation.sql script, so, how do?
  I would be grateful if someone points to the other questions I should check OWB point of view.
  
  Thanks in advance
  Carmen

  Carmen,
  Just change the address of WB_RT_SERVICE_NODES control centre.
  Don't take any attention to the value of hostname DEFAULT_CONTROL_CENTER in Design Center because this value is taken from the connection details in the window of loging (for display in the Design Center) (if you type in the address IP of Loging window you'll see IP address in the settings of DEFAULT_CONTROL_CENTER without taking into account the actual address stored in the repository OWB).

  Kind regards
  Oleg

• If I choose a parameter to the control center and later wish to return to "default" of security, how this is done? I'm afraid without knowing how by default.

  Could someone help me please? When in a Gmail message I clicked on 'Follow an element', Firefox has sent msg prevent that. If I had to choose a control center security setting to allow 'follow an element", but LATER wanted to default or go back to the Firefox command as it was, is - it possible? It is quite something to worry about to TAKE A LEAP (select a setting) not knowing how to go back. Yours truly, Amanda2.

  Normally, you see an icon at the far right of the address bar if an embedded menu is blocked.

  • https://support.Mozilla.org/KB/pop-up+Blocker

  You can control and manage permissions for the domain in the tab currently selected through these steps:

  • Click the address bar onthe Site identity button"(globe/lock)
  • Click the arrow to expand the safety message
  • Click on 'More information' to open ' tools > Page Info.
  • Click "Permissions" to inspect and change the permissions
  • Click on 'Security' to inspect and change passwords and cookies in a standalone window

  Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab.

• What is the default login for Control Center Beta?

  I tried all the connections that I've implemented in Orchestrator and none work.  All the return wrong username or password.  Anyone had any record of success in the control center?

  root +.

• RTC-5260: unable to connect to the control center

  Hello gurus,
  
  I get an error when I try to deploy my paintings, maps and dimensions
  
  RTC-5260: unable to connect to the control center, check it please you provided correct host, user, password, and Service name.
  RTC-5301: the Service control centre is not currently available.
  
  To find the errors, I ran the service_doctor.sql file and got the following response
  
  SQL > @C:\OraHome_2\owb\rtp\sql\service_doctor.sql

  there are errors in one or more packages PL/SQL and functions

  of the platform properties have been loaded properly
  Location of the platform were seeded correctly
  NLS messages have been loaded correctly

  at the service of the platform is not available
  There is an access problem to the startup of the service of the database script

  Server

  here is the detailed error that contains the name of the start

  script file:-

  starting Service "C:\OraHome_1\owb\bin\win32\run_service.bat" file is

  not available from the server of database on the instance of number 1

  Please make sure that the disk containing the file is visible in the

  database server

  is it you Please check that the database server account has access rights the

  file

  there is a problem with the connection to the repository information used to

  start the service of information

  here is the detailed error that contains the connection

  to the service:-

  can't access the owner of the database password repository

  Server

  Please check that this information is accurate
  If this information is correct, then please use the

  'set_repository_password.sql' script to reset the password stored
  
  PL/SQL procedure successfully completed.
  
  Can someone help me find the solution
  
  Thanks and greetings
  Pratik Lacoste
  DBA Oracle Jr

  I want just to know more about it then you can tell me the reason for the error...

  For example look at this thread
  Error when you try to deploy a DBLINK mapping
  or search on Metalink owb ora-01882

  Kind regards
  Oleg

• BlackBerry Smartphones blackberry 9000 mds on server and the device (mds control center)

  Hello

  I have the following problem. We use the SDM Service on the server to push the software programmed on a few blackberrys (e.g. 8800). All Blackberrys are saved on the server in the list of mds.

  The new Blackberry 9000 does not appear in the lists of mds. And after the activation of the SDM control center is not on the device. the control center of mds push automatically by group policies. but I can't found on the device. How can I make the blakcberry 9000 working with SDM on the Enterprise Server BES services?

  We use the 4.1.4.15 version.

  I'm sorry for my English. IM German.

  Thank you.

  !! UPDATE!

  I had a contact with level 2 Support T-Mobile. They told me to download the latest firmware to the updatecenter of t-mobile (has not heard of so far), then install this software on a PC and install the MDS Runtime of this package to the devices.

  After the url of the download location, where I found the firmware:

  http://updateservice.t-mobile.NET/BlackBerry/download/download.do?ref=%2Fservices%2Fftp%2Fproftp%2FS...

  --> Download

  --> Installation for PC

  --> Start the Desktop Manager

  --> Connect Blackberry "BOLD"

  --> uninstall all the "fragments" of MDS duration of unit

  --> restart the Blackberry device

  --> Install MDS DURATION & MDS default Launcher (V 4.6.0.13)

  --> Restart device

  You're good...

  The "BOLD" today BBlackberry is a device registered and within seconds all of our MDS applications when pushed to the device and work perfectly.

  I hope this will help you too.

• How to reinstall Vaio control center

  I, too, have the touchpad problem where I constantly hit him and eventually typing some random paragraph above allows to disable the touchpad when typing transcripts (I am a court reporter). I recently upgraded to Windows 7 (64-bit) and my control center options are now limited and include more the possibility to enable/disable the touchpad.

  I looked in the downloads on this site and cannot determine the appropriate one. I found a single download that looked OK, but said I must be on Vaio care versions 5. something and I am on 6.3.0.09020.

  Also I saw on this forum that there is a possible combination of function keys F1 to toggle the touchpad. I'd like to be able to do instead of launching control center.

  Can someone help me create the combination of shortcut keys or download the appropriate driver or update including the control center? Thank you.

  Hello
  Welcome to the Forums of Discussion of the user.
  What model of laptop do you have?
  If you are not sure of your model please refer to this guide.
  http://eSupport.Sony.com/us/Perl/suppor... nfo_id = 264

  your model is released before the fall of 2007? If so your model may not have full support for windows 7, if this is the case check here for some tips on installing your driver.
  viewtopic.php? t = 8254 & f = 8

  However if your Touchpad is drifting I think I can explain what is happening. go to control panel and click on the mouse properties.

  is there a tab function?
  If so disable Web support and side and down scroll
  y at - it a section to enable or disable tapping?
  If yes Doubletap disable.
  If none of the above are present, what has happened is windows has installed the default properties on the USB mouse driver and replaced the Touchpad utilities. Because the Touchpad lacks these utilities to help control, sometimes it can move erratically you met.

  To solve this reinstall Notebook control and public services
  Reinstall the shared library

• Satellite A100-237: I don't have the Catalyst Control Center after the installation of the driver

  Hello

  I use a laptop Satellite A100-237. 1.83 GHz Core Duo, Ati Mobility Radeon X 1600 512 MB Hypermemory, 1.5 GB of RAM DDR2.
  My laptop seems to now use only the own 256 MB RAM (own RAM graphics card).
  I bought Need for Speed Carbon and installed on my laptop.

  When I tried to open the game, a blue screen appeared for less than 1 second and the system rebooted. Windows said it was a critical mistake and a stopped driver Windows XP for work, so the system is restarted.
  I searched on the net for this problem, and the people said that when they pilot updated the problem is resolved.

  I downloaded the 8.241 display driver (download file name: display_xp - 8241.zip) Toshiba - Europe.com.
  Driver installed, but when installing ATI Catalyst Control Center, at one time installation process continuing collapsed. I had to end the task after a while.
  He said that the driver is installed and system must be rebooted.

  Now the game works, which is not the problem, but I do not have the Catalyst Control Center. (Where I recently use to connect other screens to my laptop)
  How can I solve this problem?

  Sorry for the long letter,
  Thanks for the help.

  Hello

  As suggested above, you can try to restart the installation but I guess that you will not be able to install the graphics driver of ATI origin on the manufacturing site.
  You can try to use the omega site ot driver drivers Toshiba orginal...

  @aportakal
  Anyway, the ATI MOBILITY RADEON X 1600 is not a memory sheared graphics card and this is why this card does not use the part of the main memory. It supports a 256 MB own memory.

• Reinstall required for ATI Catalyst Control Center after the upgrade to Windows 8

  Updated my HP Pavilion dv7 - 70232cl to Windows 8.  I don't have any problems during the upgrade.  Now I'm asked to reinstall ATI Catalyst Control Center.  The message says that my version of ATI Catalyst Control Center is not compatible with this version of Windows.  Y at - it a patch for this problem that I can download?   Thanks, jk-3003

  And the AMD Catalyst Control Center depends on .NET 3.5 installed first, otherwise it will not install.

  Launch Control Panel, select programs, click programs and features, and then click on "Turn Windows features on or off".

  Check the first box - .NET Framework 3.5 (included .NET 2.0 and 3.0)

  Make sure you are connected to the internet, because you may have to download files from Ms.

  Once this is done install your driver AMD should be fine

• Sony Vaio SVE14A35CHX keyboard option missing in Vaio Control Center

  Hey,.

  I recently did a new install of Windows 8, everything wiped and installed 64-bit Windows 8. I also bought a new keyboard that has backlit keys. I know that the work of backlight, because when I force shut down the computer, just after it stops, the backlight turns on and stays on for a few seconds.

  I downloaded all the necessary drivers, put them on my USB and them installed on the laptop. I installed the driver to monitor the shared libraries after installation of all others and then installed the original Vaio Control Center and installed all updates for Vaio Control Center in page drivers.

  I have all the options, but I don't have the keyboard backlight option in Vaio Control Center.

  I spent hours searching the Web, but nothing helped. I know the works of backlight. This lights in the dark. It lights up for a brief moment on the power key to go to sleep. I don't know why this laptop does this.

  I checked then double the backlight flex cable is securley connected, and it is. There are no other problems with this other than the backlight on the keyboard.

  Any help would be appreciated. Thank you.

  I really appreciate the help guys gave me. I don't really have.

  I solved it I just give up and ordering a new keyboard. Installed myself. The problem solved itself as if by magic. However, the old keyboard, the backlight works in my friend's computer vaio.

• ATI Catalyst Control Center popping up a warning

  Problem with the ATI Catalyst Control Center popping up a warning whenever I connect

  Whenever I login I get a pop up with this message: ATI Warning: The Catalyst Control Center is not supported by the 28octobre your compatible graphics driver. Please update your ATI graphics driver or card from ATI enableyour using the display manager. I went to the display manager but could not know where or how to turn the ATI card. This message has just started to appear about two months after I downloaded some windows updates ago and signed on. I am running Windows Vista Raedon HD 2400 PRO.

  Hi waters choppy.

  See the link below for a thread on the forums of AMD with a similar question, try steps mentioned them.

  http://forums.AMD.com/game/messageview.cfm?CATID=260&ThreadId=105228

  If the previous step fails then uninstall all the drivers of graphics card and software the computer later download the updated driver for the site Web of AMD and check.
  http://www.AMD.com/us/products/desktop/graphics/ATI-Radeon-HD-2000/HD-2400-Pro/pages/ATI-Radeon-HD-2400-Pro-series.aspx

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• T400, cannot start the Catalyst Control Center - error 'GPU active not supported'.

  on a machine running vista business 64-bit current t400.

  last week all was hunky dory.  This week, when I try to open my ati catalyst (CCC) control center, I have the following error:

  "ATI catalyst control center cannot be started because the active gpu is not managed.

  I read a few posts on this problem from not using the ATI graphics card and being rather on the integrated graphics card.  indicate the positions I could reactivate CCC simply by clicking on the battery icon in the system tray and selecting "mode high performance" to force the machine to use the discreet graphics card.  After I do and then try to start the CCC, I get the same error as above.  at this point after switching to the mode high peformance, my device manager also lists "mobile Intel (r) 4 series express chipset family ' as my graphics again.  If I have left or right click on the battery icon in the status bar, I don't see any options for explicitly switching cards.

  the card driver intel 4 mobile is listed as being from ATI to version 8.520.4.4000.

  I'm not sure of my version of the driver for the ATI card.  and I don't know where to look for it.

  to my knowledge, nothing but a number of 'critical' windows updates have changed on my system between the time when CCC was working last week now.

  any suggestions on how to fix this?  and what it does to stop working?

  Thanks in advance for any help.

  I finally thought to it.  and no new drivers or relocations were necessary.  at the end of the day, all I had to do was turn on version lenovo Power Manager (which appear in my taskbar like a horizontal green battery with the number of minutes of use remaining).  from there I can left click and access the menu that has the switchable graphics option where I can choose the economy of energy or high performance.  If a from there, I select high performance, I can then open CCC.

  the important thing please note this is to access this menu, you must be using power management program of LENOVO thinkVantage (sticking the Green battery on your taskbar icon), NOT windows built in the power manager, which appears as a vertical grey/blue /? battery in the tray system (at least on mine).  Once you have, you can explicitly pass the graphics cards.

  the strange thing is, I had been accessing CCC without explicitly switching the cards without problem until last week.  so in a way that the default setting should of spent high-performance energy saving, thus putting me on the integrated graphic card unless I went it manually.  weird.

  slide, thank you for your help.  I appreciate it.  and it is an interesting note on freeing more memory by disabling the switchable graphics.  I'll probably this give it a shot and see how I like it.  memory is never bad!

  Thanks again to everyone who helped.

• UNABLE TO START THE CATALYST CONTROL CENTER

  I CAN'T START THE CATALYST CONTROL CENTER

  Before I was using vista and everything worked fine, but when I installed win7, I wasn't able to run the program again and as a result, I can not the LCD TV as my second "monitor", or duplicate. Under display settings, there is only my monitor, so I can't change anything. I ve also connected my PC and my TV with an HDMI-HDMI cable, and on vista, I've had no problems, but now he doesn´t detect the cable. I think that's it.

  THX

  If in CCC, you go to Desktop & views, then click on detect displays, what happens?

  If this does not work I download latest CCC, uninstall the old CCC then install new CCC.

  Your monitor not detected needs a specific generic driver instead of PnP? If so, download and install that too.

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• Win7 always tries to connect by using the default profile for the Native WIFI

  Win7 always tries to connect by using the default profile for the Native WIFI
  I defined a new WIFI profile for my home WIFI network. I use a USB of NETGEAR WNA1100 adapter. The profile is configured to connect automatically. I also moved over the default profile for the Native WIFI. Win7 always tries to connect to the default Native WIFI profile and not the profile that I created. Also, when I restart Win7, the default profile for the native WIFI moves to the top of the Profiles list. Also, when I try to change the default Native WIFI profile to use security WPA2 - PSK (AES) instead of WEP, it allows me to make changes, but he comes back to WEP after it treats changes and attempts to connect to the network. How can I fix so that Win7 will use my profile to connect to my home WIFI network and not the Native WIFI as the default profile. Win7 still connect using the default profile of NativeWIFI despite installing a different profile in Control Panel 'Wireless Networks '. I know that I can edit this profile by default, but anyone know how tell Win7 to use a different profile than the default? I tried to change the positions of the profile so that I want to use is facing up, but no, still uses the default. If I try to remove it, it comes back.
  After removing the two profiles and adding the profile for my home network, Win7 automatically added the default profile for the return NativeWIFI. My profile is configured to automatically connect to the network using WPA2 - PSK (AES) security and the default profile for the NativeWIFI (use WEP security) is the Win7 Setup to manually connect. Also, Win7 puts the default profile for the NativeWIFI above my profile. Also, when I delete the profile by default the NativeWIFI, Win7 it always puts back and he goes over my profile. This is starting to resemble the Win7 manage wireless mechanism for allowing users to add and prioritize the profiles of school boards does not work. Here's another thing that happens: when I try to change the security for the profile default of NativeWIFI to WPA2 - PSK (AES) of WEP, Win7 allows me to make changes, but it is up to the WEP after it processes the changes and tries to connect to the network. This seems too much for me, it's a problem with Win7. If I could do this job, so I need not to set up a second profile.
  The adapter I use a NETGEAR WNA1100 works correctly and I use it without any problem. I have is with Win7 and the interface to 'manage wireless networks '. It will not honor the fact that the WIFI profile that I created for my home network must be connected to automatically I installed. He always wants to connect to the default profile NativeWIFI even if I set up my home network profile to connect automatically. I can do a manual connection for my home network without problem. It seems to me that it is a question of Win7.
  Kind regards
  QRP

  Thank you very much - Netgear seems to have finally accepted as the default network!  If all goes well it will stay like this

  MAS

• Message: Follow-up to Catalyst Control Center has stopped working

  Why my computer keep telling me that followed by Catalyst Control Center has stopped working: search online for solutions?

  Hello

  Check with Support ATI, their drivers and documentation online and ask in their forums
  for problems known. Update or reinstall the ATI drivers.

  Download the Catalyst Drivers here
  http://game.AMD.com/us-en/drivers_catalyst.aspx

  ATI - Forums
  http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11

  ATI - Support and drivers
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  ===============================================================

  Other troubleshooting methods:

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.