Charger works, but the battery is not charging upward

Similar Questions

• My laptop is plugged in, but the battery is not charging

  My system is win7 Ultimate, 32-bit operating system. My laptop is Toshiba Satellite - C600 - 02L, processor: Intel (r) Pentium (R) CPU, P600 1.87 GHz, 1.87 GHz... I bought it about a year and eight months ago.

  I noticed that the battery light is off. I checked the battery meter icon & he said the PC was plugged, but the battery was not in charge. In the Device Manager window, I found that a device was not working properly. The details of this device are:

  Device type: drivers Non Plug-and-Play

  Service name: MpKsl45a6e13d

  This device is not present, is not working properly or is not all its drivers installed. (Code 24).

  I don't know if this has nothing to do with the problem, but if so, what is the solution to this problem? Please help me solve this problem.

  Thank you.

  Hi Ronnie,.

  Thank you for your attention to this issue. Pls find below info from the battery.

  Battery: Battery information

  Rated capacity	48600
  Full last Charge	30272

  Concerning

  Hi Mustafa

  This information shows that your battery has 62% of the original capacity left. Even if it's a little weak, it is not at a critical point where the battery should be the cause of all the problems. The typical Li-ion battery will last for 1 to 3 years.

  I would recommend that you go to Toshiba Support forums and check to see if there is a utility to check the status of the material of the AC/charge circuit on this laptop. Here are a few links for your convenience.

  Toshiba support - home page:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Toshiba Support Forums:

  http://forums.Toshiba.com/

  Computer troubleshooting - Toshiba Forums: http://forums.toshiba.com/t5/Computer-Troubleshooting/ct-p/cat_troubleshoot

  Tell us what you find.

  Concerning

• Cannot use the internal mic. External microphone works but the sound is not very loud.

  Original title: microphone

  My microphone internal hp no longer works.  If I plug an external microphone into the socket, it will work, but the sound is not very loud.

  Hello

  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?

  Step 1: Try to run auto Locksmiths and check.
  Reference: http://support.microsoft.com/gp/hardware_device_problems

  Step 2: Set the default Microphone.

  a. go to Start and click on Control Panel.
  b. click on her, then a new window will open.
  (c) in the new window click on the "recording" tab and right-click in the window and click on Show disabled devices.
  d now check if the Microphone is listed there and right-click on it and choose Activate.
  e. Select the Microphone, and then click "set as default"

  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/record-sound

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I did a systematic update of the CC PS and PS now seems to work but the bridge is not.  I get a "CC could not update" and an error code 72.  Suggestions?

  I did a systematic update of the CC PS and PS now seems to work but the bridge is not.  I get a "CC could not update" and an error code 72.  What is the best solution?

  Thank you for your message.  I'm finally hung up with Adobe cat and after about 2 hours, the problem has been resolved.  Part of the problem was a corrupted Microsoft files.

  Ed

• (plugged in, load) but the battery is not charging

  Hello!

  I have a problem with my hp laptop Pavilion dv6 - 2190ev.

  The laptop cannot start if the charger is connected only (and the battery). It will only start if the battery is on. Also, the led and the laptop displays: (plugged in, load) but the battery won't charge!

  The battery and charger are ok, because I tried on another laptop and work there!

  So, the problem seems to be on the laptop. I also update the BIOS and the problem persists.

  Can someone help me solve this problem?

  Looks like you did a few good troubleshooting at this point.  One thing which is ofter overlooked in these questions is the motherboard.  Here is an article by HP, battery not power Notebook or hold a Charge.

  Please take a look.  There are suggestions for troubleshooting for the power supply, motherboard and battery, as well as links to other useful information. I'm sorry this isn't a simple solution, but you could just find very useful information in the article.

  Good luck with it,

• AC adapter does not work if the battery is not removed on my Satellite?

  A few days as my Satellite does not use electricity from the adapter: he wants to only use the battery (so after a few hours, it stops).

  Connect and disconnect the power supply when the notebook is on or before restarting, it doesn't change anything (if the battery is always in its place). The power adapter, cable spines,... seems in good conditions and I don't think they have problems because when I remove the battery and restart the laptop, the Satellite finally understands that he must use the power supply and not the battery. Then I can put the battery back in its place and load it... But if I unplug the AC adapter, the circus re - start.

  Is power off somewhere? Is there a place where you can choose: "always use the battery and not the power?

  I don't think so, it's a motherboard problem?

  Hello

  It is not easy to say why it happens. For me, this looks like an electronic malfunction of power supply.
  But it's only my suggestion to be 100% sure that some diagnostic tests are necessary.
  But the battery is ok and AC adapter works as well as you suggested.
  What you can do is to check your BIOS version and compare it with the BIOS that is available on the page. Is there a newer version, so you can try to update.
  Note: Be careful! Bad BIOS and update wrong procedure can damage the laptop.

  But if you use the latest BIOS, so I think it must be a hardware malfunction. In this case, the only way to find the bug is to ask the AEP from Toshiba in your country for help.

• Re: Satellite A300-21I trying to start but the screen does not light upward

  I have a laptop Toshiba Satellite A300-21I 15.4-inch around the age of 2 months.
  He walks yesterday and received a message (very short)-initialization failed, see the event log.

  Laptop computer tries to start but the display does not illuminate.
  No prior problems.

  The indices of anyone?
  Stanley

  Hello

  You are able to access the BIOS?
  You see a Toshiba start screen that usually appears at the beginning?

  What happens if you press F8 at the beginning of the boot process?

  Please provide more details!

• my computer is plugged in but the battery is not charging WHY?

  Why is my battery no load but plugged?

  Three reasons...

  1. The battery is getting old and not in good condition
  2. The power supply on the side of the machine has been fired and is no longer in contact
  3. Circuit of the charger inside the laptop does not work as it should.

  Which is more likely to apply to you?

• Speakers work, but the microphone does not after OS reinstalled (dv6)

  Sound is played through the speakers, but the Bay internal microphone and external microphone device receive no signal. Windows recognizes these devices, but the volume on the sound Panel Monitor is inactive. In addition, the webcam works fine.

  I just reinstalled the operating system and everything worked fine before this date. I installed the driver IDT High Definition CODEC (same driver as before) and the Device Manager indicates that it is up-to-date and functioning normally. I am running the same OS as soon as before reformatting (Windows 7 64-bit).

  Yes, these devices are turned on and yes I have checked the noise levels of these devices.

  Laptop model: HP Pavilion dv6t-6100 CTO Quad Edition Entertainment Notebook PC LM720AV

  Thanks in advance!

  Update: when I try to run Sound Recorder I get an error message: could not find an audio recording device.

  Solved! I ran HP Support Assistant, and he recommended that I have install a BIOS update, I did. After you restart, audio input is recognized.

• Printer HP Officejet Pro 8600 Plus works but the Scanner does not

  I recently bought a Toshiba laptop with Windows 7 Home Premium operating system.  My previous laptop is a Toshiba also upgraded to Windows 7 Home Premium operating system.  I have a printer HP Officejet Pro 8600 more all-in-one printer.  The printer/scanner works fine with my laptop more older but with the new laptop that I can't get to the printer.  I am not able to get the scanner to work.  I reloaded the software several times but the scanner still does not work.  The scanner works fine with laptop more old, even if it has the same operating system.  I get an error message that says "Scan of the computer is turned on.  You can start a scan from the printer.  Your computer is not listed as an available computer control panel of the printer.  If please restart your printer and try again. "Can anyone help with this?

  Hi ranjisamaraweera,

  Even though I'm MVP I represent Microsoft or speak. If I can and will speak
  as I think.

  The proper functioning of the printer and Scanner is the direct responsibility of the producer of material
  and no windows. There are hundreds of these devices that work correctly on Windows 7 if
  those who don't have no drivers and other interfaces which are not compatible to Windows 7 should be
  written correctly. Of course many older devices are not supported by their creators for later
  Versions of Windows. Microsoft passes but does not write drivers and interfaces
  Printers and Scanners need to function properly. So, the manufacturer and no one else, is totally
  Manager to see if there are interfaces and appropriate drivers.

  Many device makers do not write new drivers and interfaces for older hardware because either
  they cannot support the new methods or because they want to sell new hardware.

  Personally, I don't think that Microsoft is lying because they also say that device manufacturers have the
  Omos unique to provide the necessary compatible drivers and interfaces.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• My email ePrint works but the printer is not visible from my account management

  I have not used the management related to my Photosmart B110a recently. When I need to adjust the settings today my connection attempt was intercepted and I was moved to the 'new' system. I was asked to create a new password that allows me to connect, but my printer is not related to the account.

  This means that I can't manage it. The e-mail address accepts documents for printing and prints on the printer, but I now need to add new addresses of e-mail senders.

  How can I regain control of the management of my printer?

  I deleted my print printer wireless settings and added. Disappointed but time is too important. In general a superstar HP - thank you.

• I need to buy a new battery, but the battery is not on the merchant's Web site.

  1. number and product name

  Laptop HP G62 - 359-CA

  2 operating system installed (as appropriate

  Microsoft Windows 7 Home Premium 64-Bit

  Processor Intel (r) Pentium (r) CPU P6100 @ 2.00 GHz, 1999 Mhz, 2 Lossnay, 2 logical processors
  

  3. error message (if any)

  Low battery level
  

  4. all changes made to your system until the problem occurred

  None
  

  5. in the title of the topic, include a brief and accurate description of the problem and your product information (e.g., product name of your laptop, laptop computer, printer and other device, etc.)

  My laptop battery life is horrible. Ive done some research and it seems that everyone with the same laptop as I is to have the same exact type of the problem. I had the laptop in autumn 2010. I'm looking for on the site hpshopping.ca and im not finding any other spare parts for this laptop. I'm young and I don't have a job yet, so I'm not able to buy a new laptop. If someone else knows where I could purchase a new replacement battery for my laptop? Thank you!

  Hello:

  According to the service manual for your laptop on the link below, you have the choice of 2 batteries.

  Please see Chapter 3, page 3-8, article 16.  Part # 593554-001 would give you more time between charges.

  http://h10032.www1.HP.com/CTG/manual/c02542455.PDF

  You can order one on the link below.

  http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=898770C04DED4DA28D5C1F34CBF9EA5D

  Paul

• Re: Apex 3.0 insert function works, but the trace is not found

  I have an existing application that I created with Apex 3.0. It allows users to search records using several different criteria, and it allows them to update the records.
  I've added a feature that allows the user to insert a new record. The insert allows the user fill in a dozen fields. Behind the scenes, he uses triggers to get the next value for the key and set the stamp id and time user updated. It also sets a flag that is used in the select query.
  
  The insert works fine. Whenever I have to add a record, I can view using SQL developer.
  
  However if I try to search for a record that was inserted using the application, the application never finds the record.
  
  In SQL Developer I run the same query that the application is running. I always get the records that have been added.
  
  If I compare the records that have been added by using the application with existing records on the table, the data looks like.
  Any thoughts?
  
  Thank you
  
  Published by: 975204 on March 29, 2013 13:22
  
  Published by: 975204 on March 29, 2013 13:23

  Hello???

  Say, we do not know what to call it, you 975204 of the user. Could you change your ID to a name? Have you read https://forums.oracle.com/forums/ann.jspa?annID=1324?

  When checking for problems of this kind, it is acceptable to use SQL Developer - or any other tool to find an error. But if you can't find the errors, the next step should ALWAYS be to the query in the APEX in the workshop of SQL > SQL command window. And do not change the bind variable for literals in the query - paste the query in exactly as you, bind variables and all. This is a much better test of what you actually go apex. At least this is my experience.

  Kind regards
  Howard

• I changed the batteries in the keyboard. Mouse works but the keyboard does not work.

  I changed the batteries in the keyboard (wireless laser 4000 desktop computer), the mouse works fine but cannot type on the keyboard. Any ideas? Thank you

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/838398

  It will be useful.

• View heavy client work - but the HTML is not - using security server

  However, I better start a new thread after the marathon to get the heavy customer talk via security DMZ server... everything works fine now.

  I am now test HTML experience via the same security server... and get quite like I was getting with the thick client.  I cross any authentication, it says connection to the office and that's it.  Later says that the server has taken too long to respond.

  I now have a complete list of the rules of the firewall in any way.

  Clearly port 8443 is open from the Internet to the DMZ security server.

  I checked the rules and scanned, and apparently they let all ports open between the DMZ and internal both directions in our network...   I checked and 22443 is open on the desktop...

  Can someone tell me what I should look for the next please?

  Thank you

  Bill

  Make sure you go through all the steps exactly - config http://www.vmware.com/pdf/horizon-view/horizon-view-html-access-document.pdf