Connection U800W and projector to satellite

Similar Questions

• If anyone can help with my connection laptop and projector?

  I have an old projector which I easily connected to portable precedents and to bring up the image was simple, i.e. the click function + F4, but has no effect on my new laptop Toshiba.
  Could someone tell me please how to bring the image to the top of the image with my Toshiba laptop please?

  It will be interesting to know what model of laptop you have now.
  I presume that you have not read user manuals because it's always desctibed how to pass the LCD for external device.

  On computers laptop toshiba, it can be done with FN + F5. FN + F4 is for hibernation. Check it please small symbols on FN 1-12 keys.

• Satellite Pro L300-152 - unable to connect to TV, projector or a external monitor

  Hello
  Peuvent some please help?

  I bought a Satellite Pro L300-152, model without PSLB1E-01R015EN with Vista 32 bit a few months ago to replace an old Toshiba laptop not.

  The problem I have is that I can't connect external devices such as TV, projector, or a monitor.
  I used another laptop in the past with my TV and projector and have had no problems at all. I connected via the VGA port, as it is the only port with the exception of USB. Using a VGA cable, I tried all the settings that I have used in the past, but with no joy.
  I did the setting in the display settings and the FN + F5, but nothing comes up on the external screens except no signal.

  I tried to solve this problem for months and need help, please.

  Thank you
  Karl

  > When I try to update the bios driver I get a message: insydeflash the virsion or ROM file is not newer than the version of the BIOS?

  Strange what s... what version of BIOS is installed on your laptop?
  As much as I know at this time the European Toshiba page provides the version of 1, 50 - WIN update of the BIOS for this model of laptop.

• Satellite Pro C70 - could not get the image when it is connected to the projector

  This machine has been purchased for use in the classroom with projector and smart board. When it is connected to a monitor, the second screen works fine, but when it is connected to the projector DLP Epson, the computer screen and the projector are the two laptop PC empty of other manufacturers of work correctly when it is connected to the projector.

  Can you help me?

  Message has been modified: name of the laptop has been added to title

  What laptop do you speak?
  .. .and what operating system is preinstalled on this laptop?

  You use the pre-configured Toshiba system?

  Is the resolution of the screen for both devices (display and external monitor) set correctly?

• Satellite T110-11U: WLan connection dropped and very slow performance

  Hi people,

  I use a Satellite T110-11U running windows 7 Home premium.

  After having initially was very satisfied with its use, it now becomes more and more frustrating to use with wifi, with connections dropped and very slow performance.

  I have updated the BIOS and think I have updated all drivers wirelss, but could be the problem. It seems that wireless, software of management is at fault because the networks are detected, but not clinging.

  Any suggestion or tips to try will help save my sanity!

  Thanks for your help.

  John

  > have updated the BIOS and think I have updated all drivers wirelss, but could be the problem.
  If you need to make sure that you use the latest WLan driver.
  The driver can be downloaded here:
  http://APS2.toshiba-tro.de/WLAN/

  The laptop uses the Realtek RTL8191SE of WLan card.
  Please also reset the settings of the Wlan router. I had a lot of problems with my WLan and after the reset of the router, performance problems disappeared.

• Use of projector with Satellite Z830

  I tried in vain to connect to a projector on the VGA port. The screen died, and nothing comes up on the projector. I can manage to shut down the system using the 'flag' button and the arrow keys.

  However, I would use my Z830 Satellite with a projector to work, and my husband I would use it with an external display.
  Any tips?

  I presume that the projector is turned off when you connect it to your Satellite, right?

  When you turn on the projector in the same moment is just black display on laptop?

  One last thing: are you using the original operating system preinstalled that you got with your laptop?

• Apple tv to TV and projector

  Hello.  New to the community so this is.

  I want to connect to my apple tv to my TV and projector tv has HDMI connections and the projector has VGA connector.  Is there a product that allows you to connect both at the same time?

  At soon yall

  GUNIT1926

  I am told that a material separator must successfully split the output of Apple TV for you. It is important that it is a hardware solution, because a cable splitter will not work. I have not tested this solution myself, but others here have posted success.

  The next issue will be to connect your projector because is not HDMI. There are devices sold by Apple for this purpose, but to comply with the regulations that will not work with HDCP protected content.

  HDCP

  HDCP compatible converters only allow you to watch HDCP protected content such as the iTunes Store. Not compliant converters exist, but we cannot treat them in the terms of use for these communities.

  Resolution and report l / h

  I'm not aware of any converters that dimensionnera the release of the Apple TV, any TV or projector that serves ideally will be widescreen and support resolutions of 720 p (Apple TV 2), 720 p/1080 p (Apple TV 3), although Apple TV has a 4:3 resolutions number, it takes in charge, but they are not available if the TV is not rebroadcast.

  DAC

  Most of the types of HDMI to HDMI connectors no or converters do not carry audio, in this case, you may also convert your optical output into an analog signal using a DAC. If you are considering an Apple TV 4, it doesn't have an optical output then you need another adapter to extract audio and HDMI from a HDMI source.

  HDMI to HDMI + Audio (example only - not a recommendation or a suggestion that it is suitable for your situation)

  DAC (example only - not a recommendation or a suggestion that it is suitable for your situation)

• 4th generation Apple TV connected to the projector

  I have an Apple TV 4th generation connected to a projector with a Kenex of HDMI to VGA with Audio for the 4th generation.  Whenever I want to play Netflix or HBO NOW I get a black screen. I can only here the sound and I get a black screen.  It works fine when I use other applications.

  What can I do to fix this?

  I would really enjoy HBO NOW and Netflix with this number.

  I think that your card does not support HDCP on the HDMI connection, which is required by these suppliers copy protection. Because you want to convert it to VGA, this isn't surprising, because an enterprising hacker could extract the digital video stream. Most of these adapters are sold "educational purposes", not the home entertainment, and that's why. That said, if you look diligently, you can find a suitable adapter. The educational goal of the KENIMBENI is actually mentioned on the Apple store page http://www.apple.com/shop/product/H9139VC/B/kanex-atv-pro-x-hdmi-to-vga-adapter-avec-audio-prise supported, as well as a comment by the user that it cannot handle the HDCP.

• A WI - FI connection does not work on Satellite C50-A-179

  Hi all!

  I am owner of laptop Toshiba Satellite A-C50-179 (PSCGAE) with Windows 8, and recently I tried to install Connectify on it.

  However, Microsoft Virtual WiFi Miniport Adapter was missing on the laptop and given this Connectify couldn't work. I tried to activate/install somehow using advice found on the internet. The suggestion was to reinstall the driver for the wireless adapter.

  I uninstalled the driver original and reinstalled again after you download from Toshiba Web site ([here | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 7934 & selSh ortMod = 3969 & language = 13 & selOS = 40 & selType = 97 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 97 & page = 1 & ID = 86778 & DISO = 40 & driverLanguage = 42])

  I'm sure that I downloaded and installed the right driver for the right card that is "Qualcomm Atheros AR956x Wireless Network Adapter". I made prior to installation to verify all the information on the adapter and the driver.

  However, after the relocation wifi stopped working completely:

  -l' icon/network adapter wireless connection 'Control of the network connections and Internet\Network' is there but it does not behave as it should, it looks like a generic and not specific to a network connection icon - basically, it does not represent the actual adapter and got the name of it in the note;

  WiFi - option in Windows 8 settings menu-changes PC network settings has completely disappeared (bluetooth option is still there and so is the flight mode option);

  -wifi can be turned on by pressing on activate in the menu of RIGH click that generic network connection I mentioned, but it will not pick up any signal and will find all the same connections so it is certainly.

  There is no yellow exclamation point in Device Manager list and the wireless adapter is thus, to act and to pretend as if everything is fine and working properly.

  I tried troubleshooting, installing the driver using Windows Update, the installation and update of its properties menu driver in Device Manager and all kinds of things like that, but none of this has helped and wifi still doesn't work.

  Basically, the laptop seems to think that the adapter is not working properly and everything is fine HW and SW wise, but in reality it is not. I don't really know what I should try, I don't want to reinstall the entire operating system, because I'm afraid (or I) would mess everything up even more (wasting yet more pilots).

  I'm running on a cable internet connection now, and I'm happy it's working (I really need the laptop for work and I can't afford to lose for a day, not to mention some more)

  Could someone help me please?
  Any ideas how to solve this problem and make the wifi working again?
  I will be really grateful for any advice.

  Thank you, Miko31.

  Problem is that Toshiba does not support the third party software and if the problem occurred after installing Connectify you should contact support and ask for help. I mean they know how their software works and perhaps a workaround solution that can help you.

  This software is not known to me, but I can imagine there are now a few conflicts. What should do? It is not easy to say. Try to remove the preinstalled software and clean the registry entries.

  In the worst case, you must reinstall OS and reuse for laptop with factory settings.

• HP Pavilion Slimline s5-1414 connection LCD monitor & projector problem

  I bought a HP Pavilion Slimline s5-1414 with Windows 8, for my church, which came standard with 2 DVI ports. I attach a LCD monitor to 1 Port and a projector to another. Start the computer and both screens remained blank. I disconnect me the projector, restart the computer and the monitor running normally. I then connect the projector in the other port and it works as expected. However, when I restart the poster blank rest until I have do as above. I also reset the BIOS to the default settings, and both screen and projector came fine. Yet once, when I restarted, same problem. I manually set the resolution for both devices. Problem remains - every time that I reboot, displays may not run until I disconnect the projector, reboot, and after successful reboot, reconnect the projector. Any suggestions?

  Thank you for running these tests and getting back to me. I think that it is prudent to exclude at this stage of material. I have two options for you to try.

  I would like you to reinstall the graphics driver.

  Press the Windows key + Q to bring up the search

  Type 'unit'

  Click on Device Manager

  Expand graphics cards

  Double-click Intel

  Click the driver tab and click the uninstall

  Restart the computer

  Windows will automatically detect the missing driver and reinstall it on reboot. Once you are in the start screen of Windows, shutdown, connect two screens (a screen and a projector or two monitors, anyway) the computer turn on and I would like to know what the results are.

  I would also try both screens set before to turn on/off mode safe. You may need to press and hold the ESC key lighting to get the option come up, instead of SHIFT F8 as set out in section. Take a look at this article to get the procedure start mode safe. Let me know what you find

• Laptop screen disabled when connecting to a projector

  Original title:

  Hello, I am trying to connect to a projector Acer H5360 to my computer dv9750 Pavilion laptop under Vista Home Premium using an HDMI cable.

  Whenever I connect the projector, or noting happens and typing FN + F4 I can have my proposed office or automatically after a certain time, my office is planned (without typing anything). In both cases, the office disappears from the screen of my laptop (!)
  The only way to have my laptop active screen is again by disconnecting the HDMI cable AND it's not completely deterministic: it happens that the laptop screen remains inactive after extraction of the HDMI connector and until the power is cycled
  My question is how can I configure the system to always reflect the tower to the projector screen, whenever the projector is attached, while leaving the tower still active screen? before, during and after the setting of the projector.
  I would add only that I did not imagine it's be so complicated to just fix a projector. For example, when I move the same projector with the same cable to my xoom Tablet I just see projected! without doing anything more than the * physical connection *.

  How many times do you have to press the key combination?

  FN + F4 key combination is to switch between monitors. Try pressing the fn + f4 several times until you get show both monitors ON.

  When the monitor of the laptop is turned OFF and the projector is on, press the key combination, the projector must be OFF and the monitor of the laptop must be turned on. By pressing the key combination twice turns the laptop screen and the projector. There should be no instance that both will turn OFF.

  If it does not try to activate your dual display:
  Right click on the desktop-> Output To-> Intel Dual Display Clone-> notebook + monitor. It can vary in defense on your installation, I use a laptop HP and Acer LCD as a second monitor.

  Multiple monitors: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

• Connect to a projector option does not.

  Dear concerned,

  I work for an NGO, and we purchased licenses for Windows 7. Now, one day I'm in transition all computers from Windows XP to Windows 7.

  The problem I have is that on most of the PC like my computer laptop (Dell Latitude D610), Dell Optiplex GX 520, Compaq Evo D510 Small Form Factor option to connect to a project does not work. Earlier, these systems to connect with the projector when it had XP on them but since after Win 7 its does not work. Even in the resolution of the screen I can't connect to a projector or Windows + P option to connect to the external display.

  I have no idea how to solve this problem. Kindly guide me to get out of this problem.

  Kind regards

  Fahad.

  Your systems are quite old. There may be no Windows 7 graphics drivers for them.

  If you do not have Windows 7 installed for the graphics hardware that they will not work with a resolution VGA Standard and the conduct of the second monitors or projectors graphics drivers will not be possible.

• Problem with the resolution when you connect to a projector

  I regularly used my laptop connected to a projector via a cable VGA for PowerPoint and video clips view in Windows Media Player.   It is automatically detected and adjusted for different sizes of screen of the laptop screen (1366 x 768) and projector (1024 x 768) and projected with success.   Recently I connected the laptop to a second monitor - also 1024 x 768 - instead, and even once, it fits perfectly.

  It suddenly stopped setting for the resolution of the projector; When I go to the resolution of the screen, the option to set the resolution of the second screen is grayed out.   No matter if I use extend or duplicate, he insists that the two screens are 1366 x 768.   This has happened with two projectors, all two used to work properly.   I also tried different VGA cables.  The end result is that the image of the projector is hurry to tray.

  I can connect fine to the second monitor via the VGA port and sometimes with different resolutions for both screens.   I can also connect to a TV via an HDMI cable.   I can't try a HDMI cable for the spotlight as it is ceiling mounted, and the other is old and is not an HDMI connection.

  I checked the drivers and they seem to be up to date.

  My laptop is a Dell Latitude running Windows 7.   The graphics card is an Intel HD Graphics 3000.   I tried many suggestions already given on these forums without success.   The real puzzle is that it was working fine and nothing I can draw has changed except that I connected on the other monitor.

  Hi Tony,.

  Thanks for the reply with the status of the issue. I'm sorry to know that the issue is still unresolved, your efforts to solve this problem are much appreciated.

  I suggest to follow the method below and check if that helps:

  Method 1: Perform a system restore.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  System restore WARNING: when you use the system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Method 2: Uninstall all hidden devices:

  Step 1: See the article below to activate the devices hidden in Device Manager.

  Look at a hidden devices

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  Step 2: After you enable hidden devices, remove devices from Device Manager.

  1. press start.

  2. type device manager in the start search box.

  3. Select Device Manager in the search result.

  4 uninstall everything that are grey also uninstall the drivers to display completely.
  5 restart the computer and install the drivers to view the manufacturer's Web site.

  Hope this information helps, just reply to the State of the question to get help.

  Hi Rizwan

  Unfortunately, I do not have a restore point old enough until the problem occurred.   I have not found any that was relevant in hidden devices, but in normal Device Manager mode when I clicked on "monitor" it opened a "Generic PnP" entry even when there was no extra monitor or projector fixed.   When an additional monitor has been attached, there were two of these entries.   I disabled them both, and I found that I can now adjust the resolution of a second monitor to a different setting of the laptop screen.

  Thanks for your help.

  Tony

• Unable to connect to a projector

  original title: connect to a projector

  Dear friends,

  Please open the link http://windows.microsoft.com/en-US/windows7/Connect-to-a-projector     
  I can't use this option in my laptop, my hardware of the laptop works very well. same first popup Windows + P also do not do it please help me.
  OS is authentic.

  Then the input on the TV should be located on the port of c.p.,.

  Windows + P and use in dual display.

  See if you work in these menus does nothing,

  

  

• I use hyperlinks of Keynote, but they are not working when I connect to a projector AV. Any ideas?

  I use hyperlinks of Keynote, but they are not working when I connect to a projector AV. Any ideas?

  Hyperlinks don't work in the presentation on the projection screen, not 'View presenter' on Mac to display.