Connection with a portfolio of oracle

Similar Questions

• Unable to make the connection with oracle (database sqlserver) non-oracle

  We are unable to connect with the database of sql server after you have created the dblink to the oracle server.

  tnsping everything works very well between the oracle and SQL Server for database, database

  Please provide us with the solution for this problem.

  The problem is that the HS_FDS_CONNECT_INFO in theinit .ora bridge was not properly configured.

  Using the format-

  HS_FDS_CONNECT_INFO =//.

  has permits the connection works.

• Install Oracle 64-BIT ODBC connection with vCenter 5.0 question

  I'm running W2K8R2 64 bit and I am trying to connect to an ORACLE DB so I can install vCenter 5.0. I had the Oracle DBA create the DB, then I went into my ODBC on my server vCenter. I tried to create a system DSN and noticed that it there was only the SQL client. No problem, I went ahead and installed the 32 bit ODBC Oracle client\driver.     I went back, but he has not yet shown, after more research, I LEARNED that I had to go to C:\WINDOWS\SYSWOW64 and appear ODBC32. EXE that I did and I was able to connect to the DBs and see my TNS name and test connections with success. I then in vCenter 5.0 installation, but when I got the option to choose between SQL Express and the DSN names, I couldn't see my DB in the fall down... What don't get me?  I'm using using SQL, but the process is OK except that I do not see the DBs when the installation menu of vCenter dropdown, even though I was able to connect successfully to them through ODBC. ??

  In order to get listed in vCenter Server Setup, you must have created a 64-bit DSN, which requires a 64-bit Oracle Client. You can try to create a 64-bit DSN after you install the full client for 64 bit / instant client

• howmany oracle user to connect with the oracle server.

  Hi all
  
  howmany oracle user to connect with the oracle server.
  I want to search for above sentence.

  Select the user name, count (*) from v$ session group by user name;

• Oracle 8/discoverer 3.1 TNS to connect with Oracle 10g

  I installed 3.1 discoverer (which uses the language SQL 3 + version). I added the entry TNS server of Oracle 10 g.
  
  I need to connect to this server, and it gives me error of TNS.
  
  I tried to connect with SQL and TOAD, but the same error.
  
  Can anyone tell me the reason.
  
  Aqeel Nawaz

  The reason is probably that your client software is too old (and supported in the previous Millennium).
  Only 8.1.7.4 will work with 10 gr 2

  -------------------
  Sybrand Bakker
  Senior Oracle DBA

• How to activate the connection with sqlplus / as sysdba?

  Hello

  I downloaded the virtual appliance of the developer day since that's Developer Day - hands-on data application development

  Connection with sqlplus sys/oracle as a sysdba work

  But for our scripts, I need to connect to sqlplus / as sysdba (os user's oracle).

  If I try to open a session with / as sysdba I get this:

  [oracle@localhost ~]$ sqlplus / as sysdba
  
  SQL*Plus: Release 12.1.0.2.0 Production on Tue Nov 3 02:13:34 2015
  
  Copyright (c) 1982, 2014, Oracle.  All rights reserved.
  
  ERROR:
  ORA-01017: invalid username/password; logon denied
  
  
  Enter user-name: 
  

  How can I activate the oracle user to login with / as sysdba?

  Thank you

  Al

  It seems that I found the solution:

  http://www.stojanveselinovski.com/blog/2014/07/07/Oracle-12C-developer-days-VM/

  Very funny this TWO_TASK / ORACLE_SID. :-)

  CurrentY I can connect to sqlplus / as sysdba - I'm going to restore the virtual machine and try again if this is really the solution. :-)

• SQL dev to connect via odbc to non-oracle db

  Question asked to me regarding the use of sql dev to connect to a Turbo Image databsae running on a HP-3000 through odbc.  They have odbc drivers, but the front-end client is no longer supported and are looking for an alternative.  I've never used Dev of SQL to connect to a non-oracle database, but it seems as it should, maybe with the OTG for odbc.

  Ideas?

  We are a java application. Yes JDBC.

  And we offer only 3rd connectivity to help migration of Oracle. Currently we do not support Turbo-Image of database migration to Oracle.

  There are however several ODBC database generic tools out there.

• Problem of intermittent connection with ORA-12519: found appropriate TNS:no services manager

  Hello

  The users are connecting to the database using tnsentry in tnsnames.ora, everything is OK. I get complaints of intermittent connection with ORA-12519 problems. Sometimes, users are able to perform tasks on DB with no problems at all, and sometimes the error pops up.

  2014-10-31 10:57:13.0000] DbConnection::connect > connect to: "TLSDB18/***@TLSABPD9"... Got exception: ORA-12519: found appropriate TNS:no services manager

  
  

  where, as this connection will smooth usually.

  
  

  tlswrk18@illin2492! TLS:tlswrk18 > sqlplus TLSDB18/***@TLSABPD9

  SQL * more: Production of the version 11.2.0.4.0 Fri Oct 31 08:34:17 2014

  Copyright (c) 1982, 2013, Oracle.  All rights reserved.

  Connected to:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production

  With partitioning, OLAP, Data Mining and Real Application Testing options

  
  

  Please help with this problem.

  The reason may lie with the number of affected processes. Review ORA-12519: appropriate service manager found TNS:no advice and

  https://adesquared.WordPress.com/2012/06/28/fixing-the-root-cause-of-ora-12519-tnsno-appropriate-service-handler-found/

• "Error 105: connection with a token to MaxUni" error when you add a server Essbase

  I was sent Hyperion Planning and Essbase 11.1.2.3 with Embedded WebLogic HTTP server under Windows 2008 Server R2. Then I applied the patch #17767309 (this is for server EAS - free 500). Then after connecting to the EAS web console as "admin", I added a knot of Essbase server and then trying to develop it, I get nothing underneath and the following message in the box at the bottom: "error 105: connection with a token to MaxUni.

  I have stopped all services of the EMP, deleted "tmp" folder "Oracle\Middleware\user_projects\domains\EPMSystem\servers\AdminServer" / I redeployed EAS server and Essbase using the EPM system configurator - it is the sequel to advice found in this thread: https://community.oracle.com/message/11325472#11325472

  Then I restarted all services of EPM and logged on to the console of Regional service as admin, once again, deleted and added an Essbase server again and I get the same "error 105: connection with a token to MaxUni ' when you try expand the Essbase server node again.

  How can I solve this? I'd appreciate a lot of clues!

  I saw something similar bez Essbase RTC was not updated to match the version of Essbase and EAS server. Download and apply the 17767299 hotfix that is Essbase RTC 500. This should solve the problem.

  THX

  Vivek

• Unable to connect with the listening port of the client

  [oracle@rac31 ~] $ lsnrctl status

  LSNRCTL for Linux: Version 11.2.0.1.0 - Production on March 21, 2014 03:33:30

  Copyright (c) 1991, 2009, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = LISTENER)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production

  Start date March 20, 2014 13:33:30

  Uptime 0 days 13 hours 59 minutes 59 seconds

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /u01/app/11.2.0/grid/network/admin/listener.ora file

  The listener log file /U01/app/Oracle/diag/tnslsnr/rac31/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = LISTENER)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=192.168.1.101) (PORT = 1521)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=192.168.1.111) (PORT = 1521)))

  Summary of services...

  Service '+ ASM' a 1 instance (s).

  Instance '+ ASM1' READY State, has 1 operation for this service...

  'Cars' service has 1 instance (s).

  Instance "rac1" READY State, has 1 operation for this service...

  Service 'racXDB' has 1 instance (s).

  Instance "rac1" READY State, has 1 operation for this service...

  The command completed successfully

  In my server in the Oracle_HOME/network/admin

  This is my entry in tnsnames.ora

  RAC =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = rac-scan)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = rac)

  )

  )

  I am able to connect with the command

  sqlplus system/password@rac

  However, when I give the same input on the client computer

  It does not work

  I am able to ping the host rac-scan successfully

  C:\Users\rgehi > ping rac-scan

  Ping rac - scan.oracle.com [192.168.1.113] with 32 bytes of data:

  Response from 192.168.1.113: bytes = 32 time < 1 ms TTL = 64

  Response from 192.168.1.113: bytes = 32 time < 1 ms TTL = 64

  Response from 192.168.1.113: bytes = 32 time < 1 ms TTL = 64

  Response from 192.168.1.113: bytes = 32 time < 1 ms TTL = 64

  Ping statistics for 192.168.1.113:

  Packets: Sent = 4, received = 4, lost = 0 (0% loss),

  Time approximate round trip in milli-seconds:

  Minimum = 0ms, Maximum = 0ms, average = 0ms

  C:\Users\rgehi > sqlplus system/password@rac

  SQL * more: Production of the version 12.1.0.1.0 Fri Mar 21 03:40:53 2014

  Copyright (c) 1982, 2013, Oracle.  All rights reserved.

  ERROR:

  ORA-12545: Connect failed because target host or object does not exist

  I installed oracle client on my desktop

  and I made entries in the tnsnames file

  However when I connect to the database to rac with scan it works sometimes...

  not always...

  so I'm in search mode and finally, after many moons a lot and light years away, I found the following

  Here's what I did

  # - scan

  192.168.0.127 rac31 - scan.oracle.com rac31-scan

  192.168.0.128 rac31 - scan.oracle.com rac31-scan

  192.168.0.129 rac31 - scan.oracle.com rac31-scan

  I put three ip addresses in the host with the same name rac31-scan file

  then I put the same ip addresses in my windows hosts file

  Here are the entries

  192.168.0.127 rac31 - scan.oracle.comrac31-scan

  192.168.0.128 rac31 - scan.oracle.com rac31-scan

  192.168.0.129 rac31 - scan.oracle.com rac31-scan

  but in the (windows 7 pc) client tnsnames file has just one entry

  It's here

  RAC1 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = rac31-scan)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = RAC)

  )

  )

  and now when I connect from the client... it connects without any problems.

  I have tried more than 10 attempts without problem

  BINGO!

• Connect with sqlplus tnsname alias thorugh his gel

  10 gr 2 oracle 10.2 on Windows Server 2003 R2, the database database worked for awhile now and not specific changed have been made but now I try to access the database via sqlplus may not connect with all valid users, and I have ne error message, it seems that the database cannot connect to sqlplus via a tns alias name it freezes and even local connection working

  How to solve these problems

  All very much appreciated

  Thank you

  While ensuring services for oracle and listener, I found that oracle service has been run with a domain user account so that the listener is running in the local system user account.

  When we also changed the user domain account auditor account, then restarted the listener, we have seen labour NETCA. The connection to the base through TNS works also.

• 11.1.2.3.003 Essbase / EAS 105 error: connection with a token to MaxlJni

  Recently, I have patched to 11.1.2.3.003 for my Essbase, EAS and APS. I can connect Smart mode very well so I guess that APS works according to the needs. Even if after patched my Essbase and EAS to 11.1.2.3.003, I get this error when you try to log on to INJURED since the web url 105: connection with a token to MaxlJni. I know that this is relevant to an error, a person had in an earlier version Re: error when you try to connect to the Essbase Server. Does anyone have advice or suggestions outside of roll back the patch?

  John,

  The common thing oracle fails to mention in their readme files, redeploy.

  After the redeployment of the applicable modules I bounced so services.

  I am now able to connect to the Regional service.

• SQL * PLUS connects with SQL &gt; question

  People,

  I'm confused on the command. / sqlplus with Oracle database.

  According to my understanding,. / sqlplus connected with SQL > using option 3: sysdba, sysoper, sysasm.

  I connect with SQL > to run the rel853.sql script to create a table PSOPRDEFN but a field "OPERPSWDSALT" did not appear in the table PSOPRDEFN although it is in the Create Table statement.

  I connect with SQL * in the directory/home/user/OracleDB_Home/bin as below:

  
  $ export SYSTEM_PASS = AccessId/mypass

  $ export ORACLE_HOME = / home/user/OracleDB_Home

  $ export ORACLE_SID = HRCS90

  $. / lsnrctl start LISTENER

  $. / AccessId/mypass sqlplus as sysdba

  SQL > startup

  SQL > @/opt/PT8.53/scripts/rel853.sql

  SQL > select OPERPSWDSALT in the AccessId.PSOPRDEFN;

  It returns: "OPERPSWDSALT": invalid identifier.

  
  I checked the table PSOPRDEFN that the OPERPSWDSALT field did not appear in the table PSOPRDEFN.

  I tried the sysoper option as below:

  $. / sqlplus AccessId/mypass as sysoper

  SQL > startup

  SQL > @/opt/PT8.53/scripts/rel853.sql

  SQL > select OPERPSWDSALT in the AccessId.PSOPRDEFN;

  It returns: "OPERPSWDSALT": invalid identifier.

  The sysoper error is the same thing with sysdba error.

  I tried the sysasm option as below:

  $. / sqlplus AccessId/mypass as sysasm

  He returned: connection refused.

  
  Someone told me this connection as SYS causes this error. If not a sysdba, sysoper, or sysasm, use the command. / sqlplus AccessId/mypass cannot connect with SQL >.

  
  My question is:

  
  First of all, why is what OPERPSWDSALT did not appear in the PSOPRDEFN table while it is in the CREATE TABLE statement?

  
  Seocond, if not use SYS which is one of the 3 options, how to run the command. / sqlplus AccessId/mypass to connect with SQL > so that CREATE TABLE PSOPRDEFN correctly?

  Thank you.
  

  user8860348 wrote:

  People,

  Hello. Thanks much for the reply. I just do the commands below:

  $ export SYSTEM_PASS = AccessId/mypass

  $ export ORACLE_HOME = / home/user/OracleDB_Home

  $ export ORACLE_SID = HRCS90

  $. / lsnrctl start LISTENER

  $. / AccessId/mypass sqlplus as sysdba

  SQL > show user;

  Its release: the USER is "SYS".

  SQL > connect AccessId/mypass

  Its output:

  Error: ORA - 01034:ORACLE not available

  ORA-27101: shared memory realm does not exist

  64 - Linux_x86 error: no such file or directory.

  As we see above, unable to connect to the Oracle database AccessId.

  My question is:

  What to do on AccessId, so that it can connect to the Oracle database?

  Thank you.

  so much for the use that you refuse to actually use COPY it PASTE & so that we can see the whole session.

  In the past, you did

  > SQL > startup

  Maybe the database is out of order & must be started.

  do exactly as below (line by line)

  ID

  sqlplus

  / as sysdba

  startup

  connect AccessId/mypass

  COPY the results from above then PASTE all back here

• Establish a connection with the server

  Hello
  
  Read the docs and came across two ways to establish a connection with the server of a customer.
  
  ' (1) easy login:-sqlplus hr@\"//mymachine.mydomain:port/MYDB\.
  (2) name of network service:-sqlplus hr@MYDB.
  
  While establishing a connection to a server, we use sql * net services (if not jdbc or odbc), which should be present at the server end and the customer. So what is the fundamental difference between the mechanisms of above two connections?
  
  
  
  
  Thank you and best regards,
  Saidi.

  See http://www.orafaq.com/wiki/EZCONNECT.

  The difference is described in the first line.

  ----------
  Sybrand Bakker
  Senior Oracle DBA

• Problem with Greek characters in Oracle 11 g

  Hello
  
  I have an Oracle 11 g only express Edition installed on my Windows 7 64 bit machine, and I store the Greek characters inside.
  
  The characters appear well on SQL Developer.
  
  But when I connect it to my php using PDO I get? instead of Greek characters.
  
  I've set nls_lang in the GREEK_GREECE register. EL8MSWIN1253
  
  But when I run select * from nls_database_parameters, I get the following.
  
  NLS_LANGUAGE AMERICAN
  NLS_TERRITORY AMERICA
  NLS_CURRENCY $
  NLS_ISO_CURRENCY AMERICA
  NLS_NUMERIC_CHARACTERS.,.
  AL32UTF8 NLS_CHARACTERSET
  NLS_CALENDAR GREGORIAN
  NLS_DATE_FORMAT DD-MON-RR
  NLS_DATE_LANGUAGE AMERICAN
  NLS_SORT BINARY
  NLS_TIME_FORMAT HH.MI. SSXFF AM
  NLS_TIMESTAMP_FORMAT-DD-MON-RR HH.MI. SSXFF AM
  NLS_TIME_TZ_FORMAT HH.MI. SSXFF AM TZR
  NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI. SSXFF AM TZR
  NLS_DUAL_CURRENCY $
  BINARY NLS_COMP
  NLS_LENGTH_SEMANTICS BYTES
  NLS_NCHAR_CONV_EXCP FAKE
  NLS_NCHAR_CHARACTERSET UTF8
  NLS_RDBMS_VERSION 11.2.0.2.0
  
  Also, when I connect with the pdo function I use this command: $pdo_string = 'oci:host ='. $this-> server.'; dbname ='. $cette database->.'; = AL32UTF8 charset';
  
  Any ideas on that?
  Any help will be appreciated.
  
  Mike

  There is no csscan or csalter to XE. You are not allowed to use them. XE is Unicode only by its design. Instead of trying the methods not supported, why not just store Greek in Unicode (AL32UTF8) as it should.

  -Sergiusz