console server and room of local connection

Similar Questions

• What is a proxy server and how do I connect to it?

  When you try to play something, I get a message on my screen saying: "Windows Media Player cannot play the file because a network error occurred.  The server may not be available.  Check that you are connected to the network and that your proxy settings are correct. »

  See if that helps
  http://support.Microsoft.com/kb/260023#appliesTo
   
  --
  ..
  --
  "Scojo007" wrote in message news: 29f1a373-f725-4e20-ab89-8f914fba7160...
  > When you try to play something, I get a message on my screen saying:
  > "Windows Media Player cannot play the file because a network error.
  > occurred. The server may not be available. Make sure you are
  > connected to the network and that your proxy settings are correct. »
  >
   
   

• When playing xbox live and someone turns on the laptop he loses the connection to the server and then resets modem

  when im playing left 4 dead 2 versus and kids turns to the top turn of the page to play counterstrike he says: interruption of the connection to the server and then resets my modem or router

  I had the Charter to come out, they ran the new line and I always have problem help me please

  Hello

  ·         What operating system do you use?

  Step 1:

  I suggest you to update the firmware of the router on the manufacturer's Web site and verify that it helps. For more information on how router update contact your router manufacturer's support site.

  Step 2:

  Try to assign the static IP address for an Xbox 360 and the laptop and check if it helps.

  To assign a static IP address for your laptop:

  one) click Start > Control Panel > network and Internet > network and sharing Center and click on change adapter settings.

  (b) select your network adapter. (if you have more than one list) Right-click on the adapter and choose 'Properties' from the list.

  (c) under "this connection uses the following items," click once on "Internet Protocol Version 4 (TCP/IPv4) to select it and then click on the button 'Properties'.

  (d) click the radio button for "use the following IP address:" enter the static IP address, you want to use in the IP address box.

  (e) press "Tab" when you are finished and that the "Subnet mask" value should automatically populate with the correct value.

  (f) Finally, you will need to enter the IP address of your default gateway and the IP addresses of your favorite servers and auxiliary DNS.

  (g) the default gateway is the IP address of your router. The DNS addresses are usually provided to you by your ISP.

  (h) click on 'OK' to save your changes, and then click 'OK' again on the local area network connection properties window. You have now assigned to your computer a static IP address in Windows

  To assign a static IP for Xbox:

  (a) turn on the console and press "Guide" on the controller to bring up the quick menu.

  (b) go to the 'Settings' tab, then open "System Settings." The dashboard opens and the 'System settings' menu.

  (c) select 'Network settings' in the menu new. Another list of menu options is displayed. Choose "Configure network." This opens the network configuration menu, where you can set a static IP address. Note your IP address, subnet mask and gateway.

  (d) change your settings 'IP' to 'Manual' instead of 'automatic '. This will allow you to manually select your IP address and other settings. It can also erase your current settings, that's why you need to write.

  (e) change the last three digits of the IP address. Enter the same numbers for the subnet mask and the gateway that you saved in step 3. Press 'B' to exit from the menu and save the changes

• How to get to the factory of local connections created within a foreign server in OSB

  Hi all
  
  I am facing a problem in my plan of config. We have a foreign server SIDES with the factory of following local connections:
  
  JMS/RibAqJmsXATopicConnectionFactory
  
  
  I use below in my configuration level:
  
  < cus:envValueAssignments >
  URI of the Service < xt:envValueType > < / xt:envValueType >
  < xt:location xsi: Nil = "true" / >
  < xt:owner >
  ProxyService < xt:type > < / xt:type >
  < xt:path > RLTPReturnToWarehouse/ProxyServices/ConsumeRIBRTWMessages < / xt:path >
  < / xt:owner >
  < xt: value xsi: type = "xs: String" xmlns: XS = "http://www.w3.org/2001/XMLSchema" > jms://localhost:7001 / jms. RibAqJmsXATopicConnectionFactory/jms.etASNInFromRIBToWH1 < / xt: value >
  < / cus:envValueAssignments >
  
  and I get the below error:
  
  [java]
  [java] Loading customization fichier./dev/OSBCustomizationFile.xml
  [java] Customization applied to the created only resources]
  [java] com.bea.wli.config.customization.EnvValueCustomization@553c13
  [java] Unexpected error: com.bea.wli.sb.transports.TransportException
  [java] Problem call WLST - Traceback (innermost last):
  [java] File "D:\VFUKScripts\DeploymentScripts\osb\import.py", line 200, in it?
  [java] File "D:\VFUKScripts\DeploymentScripts\osb\import.py", line 122, in importToALSBDomain
  [java] com.bea.wli.sb.transports.TransportException: has no research factory jms connection. RibAqJmsXATopicConnectionFactory
  
  
  what I'm missing here?

  [java] com.bea.wli.sb.transports.TransportException: Failed to research connection factory jms. RibAqJmsXATopicConnectionFactory

  It seems that the JNDI you created for the ConnectionFactory is not reflected in the server.

  Connect to the WLS Console > summary of the servers > server_name > view JNDI tree
  Go to the JNDI tree and see if your JNDI is visible here. If it isn't then, reboot the server and check again.
  If you are able to find in the JNDI tree, then run the customization file.

  If you have changed the existing JNDI properties (which have a small symbol exclamatory) then any change to those who do not appear until all servers in the cluster are restarted.

  If it still does not work, then recreate a new connection with a different name and then try again. It should then work.

  Thank you
  Patrick

• I put my cRIO 'DHCP' to 'local connection' and lost contact with her.

  I put my cRIO 'DHCP' to 'local connection' and lost contact with her.

  I changed the location setting labelled '2' to post a link-local only, so I think I hit save to '3 '.  So, I have had no contact with my cRIO network.

  I tried;

  Hit the reset button

  A MAX of opening closure

  Go to safe mode

  Lift the switch to reset IP

  Power cycling the cRIO

  Directly from the host to my target of cat 5 cable running

  None of it worked, and I have no contact with my cRIO.

  

  This is what MAX looks like now.  How can I fix?

  

  It turns out that I had more of a problem.  Corrupt drivers, 255 in many in my subnet mask, overly complex LAN, use server control... you get the idea.  So I just deleted all software, disassembled everything and more from scratch.  Now back to the top and work.

  Thanks for the tips everyone, all the pieces and peace where it is useful to help me see the bigger picture.

• Disable the protocols and encryption algorithms in VMware View connection server and security

  Hello

  In my recent deployment, I had a customer request to disable some protocols and encryption at the Server VMware View connection and security. I read some articles and found that this has been achieved by editing the locked.properties file. But when we have edited and replaced the file, users could not connect to the virtual desktop, so came back to us backwards and desktop computers worked fine.

  I found a few articles that we don't need to edit the locked.properties file in VMware view Horizon 6. If someone has done this please guide me through. Here are the details of the protocols and encryption algorithms that should be disabled

  Diffie-Hellman key

  Enable SSL v2/V3 and TLS 1.1 and 1.2

  Disable the RC4 encryption algorithm

  Select the secret of transfer (if possible)

  
  

  VMware view 6 is the connection to the server and security server.
  

  
  

  Thank you.
  

  Hello

  I implemented the following steps (from the manual):

  1. update the JCE policy files to take in charge the high-strength Cipher Suites

  You can add some cipher suites of high resistance for greater assurance, but first you must update the local_policy.jar and US_export_policy.jar files to each server instance and the security strategy for JRE 7 see connection to the server. You update these policy files by downloading the files to extend JCE (Java Cryptography) unlimited strength political jurisdiction from the Oracle Java SE download site 7.

  If you include some high-strength cipher suites in the list and you do not replace the policy files, you cannot restart the VMware view Horizon connection to the Server service.

  Policy files are located in the directory C:\Program View\Server\jre\lib\security from VMware.

  For more information on the download of the JCE unlimited strength jurisdiction policy 7 files, see the Oracle Java SE download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html.

  After you update the policy files, you need to create backups of the files. If you upgrade the instance of the view connection server or security server, any changes you have made to these files can be replaced, and you may need to restore the backup files.

  2. the changes that policies of global acceptance with ADSI Edit

  • Start the ADSI utility on your computer see connection to the server.
  • In the console tree, select Connect to
  • In the selection or type a unique name text box or a naming context, type the unique name
    DC, DC = vdi is vmware, DC = int.
  • In the type or select a text field or the server box, select or type localhost: 389 or the name of a fully qualified domain (FQDN) of the server computer to connect to port 389 followed view.

  For example: localhost: 389 or mycomputer.mydomain.com:389

  • Expand the tree of the ADSI Editor, OU = properties, select OU = Global, then select OU = common in the right pane.
  • On the object CN = common, Global = UO, UO = properties, select each attribute that you want to change and enter the new list of security protocols or cipher suites.
    I used the following settings:

  EAP-ServerSSLCipherSuites: \LIST:TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA256

  EAP-ServerSSLSecureProtocols_ \LIST:TLSv1.1,TLSv1.2

  It is not the highest possible, but they work with all the features of our customers.

  • Restart the service of VMware view Horizon connection server (server connection and security).

  This is not Activate secret transfer (if possible) , but other points are covered.

  If anyone can give a tip to activate the transfer secret, I would be grateful.

• Unable to connect to the administration via the regional service console server after 11.1.2.2 installation

  Hi gurus,

  I have installed and configured the services foundation, eas and essbase in windows 2003 server, afteEA r configuration I have observed that there are no tables for eas schema then I found that it was a bug and applied patch and set up again it has been successfully configured.

  When I tried to connect to the administration via the regional service console server. He States unable to connect to the administration server. everything else works.

  I see only 4 services in services.msc

  Oracle hyperion configuration manager

  EMP web server application

  opmn services

  OSH services

  all services are started with the exception of oracle hyperion configuration manager. I tried to start, but it does not start... is - this service has an impact on the administration server.

  I checked the logs, I can't find anything in easserver.log.

  any suggestions?

  Kind regards

  Kumar

  Looks like you have deployed web applications to a single managed server that is running on a port by default of 9000, then try to add the server to the Regional service as servername:9000

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Change the id vlan of the Service Console and now can't connect

  Hello

  My ESX 3.5 server was with a Service Console PG and a PG VMotion on vSwitch0. There are 2 physical NIC assigned to the vSwitch, which are transmitted to the 2 physical network switches.

  Guys id assigned netoeking vlan 200 to 2 ports on the 2 natachasery physical switches is connected. In the VI client, if I change the properties of vSwitch0-> Console of Service and the value of the vlan 200, I completely lose connectivity to the host. I can't ping the IP address SC longer. I have a keyboard/screen connected to the host and when I connect to the SC, I can't ping the default gateway of the SC or whatever it is.

  I used esxcfg-vswitch to set of the SC vlan id 0 (all) and bingo!, I can speak to the host again and he can talk. The network guys arrure me, they put the vlan id = 200 on the OK physical switch ports. So what goes wrong?

  FWIW, we also have an ESX4 from same host configured the host to 3.5 and it communicates very well. It's the SC a vlan = 200 and issued for the same physical switches.

  George.

  the switch port config are not the same between the hosts of working and non-working.  See http://kb.vmware.com/kb/1003806 for example config

• Android web server and local

  Hello

  First of all, quick summary of my configuration:

  • 6 devices - 3 Android and iOS 3 devices all connecting via wireless
  • LAN with my own Web server and DNS. All Web sites are configured to work outside virtualhost such as mysite.local and can be access in the browser on my desktop and all devices
  • My own local server weinre works again since all devices
  • My own PC with Chrome and and extension edge inspect
  • All devices can connect on board to inspect without any problem and in a position to use synchronized browsing Web sites on the internet

  I just upgraded to the full version of creative cloud and now I can view is more Web sites on my LAN in edge inspect but ONLY on my Android devices. I would absolutely swear that my Android devices to connect but for some reason, they cannot now and I get a message "Web Page not available". In addition, it shows the IP of my desktop (I guess this is how to inspect dashboard works?) as the address that it is unable to connect. On the back of this, I tried to connect to this IP address in the Android browser but nothing happened, and I turned off the firewall on my desktop PC but still no luck. Finally, I tried everything Android devices on their own without the connected devices iOS, but also with all 6 are connected and it's the same thing every time.

  Anyone able to help?

  Thanks in advance,

  Chris

  Hi Chris,

  OK, got it. I'm sure that I know what goes wrong. In iOS, the .local domain names management is automatic, but we had to in Android code in a solution for this particular situation. In iOS, .local refers to the local computer, so when the Android client sees that URL to enter, she replaces part se1united.local of the URL with the IP address of the machine running edge inspect. In most cases, that works, but in your case, it seems that you are in fact trying to refer to a third machine whose IP address must be resolved in dialogue with your own domain name server. The code native iOS that runs properly and is not our code custom Android.

  So there is a problem with our Android app, but I suspect the fix for this will not be easy. In the meantime, there should be some simple solutions, you can choose from your side which must make things work correctly with applications Android and iOS.

  1. In Chrome, try referring to your site with the following URL: http://192.168.1.50/ OR
  2. Rename your server from se1united.local to something that does not include the part ".local" domain name

  I think that is one of those who should work fine.

  Let us know if you have any other questions or problems,

  Mark

• Unable to connect to Essbase on Regional service Console server because of error 1042006

  Hello
  
  I installed the whole EPM 11.1.1.3 on Windows x 64 platform. When I try to connect the server essbase through the Regional service console, I get the following error:
  
  Essbase Server: localhost com.essbase.eas.essbase.defs.ServerCommands.Connect December 28, 2010 17:39:08 IST
  Error: 1042006: error network [10061]: unable to connect to [localhost:1423].
  The customer has expired waiting to connect to Essbase Agent using the TCP/IP protocol.
  Check your network connections.
  Also, make sure that the values for server and port are correct
  
  I checked the CFG file, which shows the correct port as well. I can connect to the Administration of Essbase server located on the same machine, but do not know why I get this error message. Below I have pasted the contents of the CFG file, in case where someone wants to cross check it out.
  
  
  CFG File indicates the following:
  
  ; The following entry specifies the full path to the JVM. DLL
  ; JvmModuleLocation D:\Hyperion\common\JRE\Sun\1.5.0\bin\client\jvm.dll
  BPM_Oracle_DriverDescriptor "MERANT 5.2 OEM 32-BIT Oracle Wire Protocol.
  BPM_DB2_DriverDescriptor "MERANT DB2 Wire Protocol BITS 32 5.2 OEM"
  BPM_SQLServer_DriverDescriptor "MERANT 5.2 OEM 32-BIT SQL Server Wire Protocol.
  BPM_SQLServer_DriverDescriptor "SQL Server."
  ; BPM_Netezza_DriverDescriptor "NetezzaSQL".
  BPM_Teradata_DriverDescriptor "Teradata.
  BPM_ORACLEBI_DriverDescriptor 'Oracle BI Server'
  ; AuthenticationModule CSS
  ; AGENTPORT 1423
  ; SERVERPORTBEGIN 32768
  ; SERVERPORTEND 33768
  ; AGENTDESC hypservice_1
  AGENTPORT 1424
  SERVERPORTBEGIN 32768
  SERVERPORTEND 33768
  AGENTDESC hypservice_1
  
  
  Ideas that would be really useful.
  
  Thank you
  AJ

  There is a clue in the error message and the CFG file you posted.

  The error message:
  ...
  Unable to connect to [localhost:1423].
  ...

  CFG file indicates:

  ...
  ; AGENTPORT 1423
  ...
  AGENTPORT 1424
  ...

  The port default (1423) is commented out and changed in 1424. Your EAS connection must use port 1424 and not default to 1423.

  Try to use "localhost:1424" (without the quotes) in the Essbase server field when you add the Essbase server to EAS.

  Published by: Robert Armstrong on December 29, 2010 13:25 - typo

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions?

  Im having trouble with my iphone 16 GB ios 9.3.3 5s (G 13, 34) receive error code 22 tries to connect to the server, and nowhere suggestions? I have tried almost everything turn power switch wifi in the middle and doing it to try to track down the problem in the Device Manager and im completely disgusted

  Have you tried turning off and back on again?

• After update my iPad iOS 9.2.1 to 9.3 live 2 I can't connect to the activation server and does not have the latest version of iTunes to activate

  I downloaded the update to iOS over-the-air 9.3 and installed. Setup cannot connect to the server to activate the ipad2. The message is to try again in a few minutes or connect to iTunes to activate. Yes, I have the most recent and current iTunes version, so this isn't the issue. iTunes recognizes the iPad as my ipad2, but cannot do what he done to be able to use iTunes to activate it. I have 2 iPads. iPad 2 and iPad 4th generation. iPad 4th generation downloaded on-line and updated and active and install without problem. IPad2 updated and not can not connect to the server to activate and I connect to iTunes to activate as the message says, but iTunes cannot activate because it sees my ipad2 and that's all that. Of course, I'll try again once activate WiFi tomorrow but any suggestions would be greatly appreciated.

  Thand you

  same problem with you jerryenea. This seems to happen ipad 2 only? my itunes cannot check my ipad

• Open a local copy or move on the server, and then disconnect while the task is running until the end

  RNOS6 running on RNDU600 +.

  Looking to start a local copy or move of the large collection of files on the server, and then disconnect the PC while the task is running until the end. For example, to move a branch of several hundreds of GB of small files from one share to another, or copy them to a share.

  Seems to make my PC (in wireless) is inefficient as each file seems to have sent to the PC first, then return to the NAS.

  Is there a way of ordering on the NAS, so that it can continue the operation even if the PC is disconnected?

  Have you tried to make using the web administration page?

• Bytes of TCP IP and subset of bytes for the connection of server and clients

  Hello

  I have a problem on the server and the client connection using the TCP/IP protocol. In the client, I have 41 cases, 1 case of timeout, others are for the case of button when they are pressed and then the LED on the server will be to market and if a click again the led will be off. But when I reached cases 10, 11, 12 up to the 41 (key case), that the LED lights if you click only once, but when he double clicked then the light does not turn off. So, how you solve the problem? Is this subset or bytes to read because the first subset is 1 case but no 10 to 41 will not work, but I change the subset in 2 then the case works for don't light the LED, but it do not work to turn the LED off.

  I also download the vi in this for reference.

  the user name for the client is the user and the password is pass.

  Thank you

  Hi ican.

  you have not changed the customer. See the attached picture. The error in the server side, it's that the 4 was connected on the two functions of split to the length. See Server for the necessary difference image.

  Mike