Consolidation of project without transcoding

Similar Questions

• Series Toshiba 40RL933G - no subtitles on DLNA without transcoding

  Hi guys,.
  I have 2 40rl933g TV. I used USB to play any good movies.
  I install me a DLNA server, put all the parameters needed, but failed to play subtitles via DLNA without transcoding.

  All advice if it is possible to play the media + subtitles via DLNA without having need of transcoding (and use high CPU :))

  See you soon
  Yasen

  Hello

  Operating instructions (page 53), you can find this note:

  + To select the subtitle and audio language (* USB ONLY *) press subtitle to select you preferred language subtitles. +

  + Note: this function is not available depending on the content. +

  In my opinion, this means that subtitles are available only to play movies from USB device and it also depends on the content you are playing

• Check in a project without media

  Hi all.

  Probably a very simple answer to this question, but something I have not been able to work on myself.

  I currently have a library containing a single project which takes up 100 GB of storage on my external HARD drive.

  This project is complete, so I want to archive in case it is needed in the future.

  I reduced the size of the library en masse by deleting files of rendering.

  Now, I created a library called "Library Archive" on another external drive, then selected the initial project, and then file > copy to the library project.

  I select the 'library of the archives', I did not checked 'include proxy support' etc, but it does increase the size of my library of archives to 7 GB.

  I want to only save the project without any media - if I need to use the project in the future, I can re-import the original media.

  Is there a simple way to do this?

  Thank you.

  MMake a new library on the same drive as the original.  In the properties of the Library set an external file to the media. Copy the project that you want to check in the new library.

• Collect project without changing the file structure?

  Hi all, anyone know if there is a way to collect a project without overlapping of images in a folder (film)? I organize my pictures in a folder with the files to the appropriate subcategory, I work, but like to use collect in order to reduce my folder of images at the end, as often, I have tons of items to choose from that I, or items left behind by the previous revised project, in the end, States I always end up with a folder of images in a folder of images. (I know that I have worked with all my images to the same level as my project, but what a waste.) I don't work that way.)  How other to face this? Looks like there must be a simple way that I'm not aware of. Thank you for your comments!

  If you just want to clean up your ASP project so that only the images used in the project remains in the project Panel, then simply use the Reduce function. The collect function has no option to recreate the same folder structure you have in the AE project Panel.

  If you want to manage the content of your files by removing the assets then you must use the collect function and then find a way to reorganize the structure of your file on your hard drives. I only use the collect function when I say someone to work on a project that has been approved. If they have access to the original images I'll let worry about duplicates on their own system.

  For all of my clients, all assets (videos, photos, pictures, scripts, notes, project management, billing - everything to do with this customer) go into specific folders and the original documents and the revised documents are never deleted. I have a carefully designed project of numbering and system files I used for many years going back to my days of working with film. Basically I have folders arranged like this by job under each customer number so I can watch my logs of project or an invoice or an e-mail with the project included number and go directly to resources for this job years later.

  • Docs
    • Invoices
    • Scripts
    • Production notes
    • Search
  • Video
    • The original film Date data / scenes
    • Intermediaries / scenes
    • Rendering of effects / scenes
    • 3D rendering / scenes
  • Audio
    • Production date / scenes
    • Scratch titles
    • Audio processing / scenes
  • Project files
    • After Effects / scenes
    • First / scenes
    • Illustrations
      • Air currents
      • Approved

  You get the idea. Personally and I learned this the hard way, I have never intentionally remove any work product or communication that I used to create any work for any client, I just organize files in a way that puts all the work approved in the approved appropriate folder and that the customer has access to the work approved.

• I could leave Media Composer of Avid to Adobe first Pro CS6.   Here are some of the questions: 1. With Adobe first Pro CS6, would I be able to import images from my Canon G30 video camera WITHOUT transcoding?  2-. I would be able to pay and get the fo

  1-. With Adobe first Pro CS6, would I be able to import images from my Canon G30 video camera WITHOUT transcoding?  2-. I would be able to pay and get phone assistance from Adobe?  3-. I would be able to create DVD or disc Blu Ray in stereo or surround sound?   4-.  I have a collection of software from NewBlue.  He will work with the Prime Minister?  Thanks for the info.  Bert

  1. I don't know, but go to first import Formats html 0 http://help.adobe.com/en_US/premierepro/cs/using/WSd79b3ca3b623cac97fa024001235833a568-800

  2 - as far as I know, Adobe does not provide telephone support, only this forum

  3. you use the reminder grouped to create a DVD or BluRay http://forums.adobe.com/community/encore/content

  4 - If the plugin is specifically designed for PPro CS6, so ask the provider

• Delete a source code control RoboHelp project, without opening HR

  Hello

  I use HR 11 and Visual Studio source code control.

  I need to take an archived version of my HR project and open it to the changes that are not in the current project.

  When I unpack my archive, it automatically links to the source code control and downloads the latest version of the project.

  It supersedes the current source code control project and even change the mapping of the source control path must match the project archives.

  So what I need to be able to do, is open my archives project without source code control interface. Is there a file I can edit linking the project to source code control? I can't even open the project in HR because it distracts the mapping of source control.

  Thank you.

  It is fairly easy to do. See Rick's excellent post: October 2004 - ban witchcraft do not forget to remove the CPD file however.

  Kind regards

  Willam

• How to set CC at the beginning of the project without using the CC button?

  How to set CC at the beginning of the project without using the CC button? I want CC which by default and allow users to turn off if they do not need.

  Hi again,

  If you have a Standard Action, then just add a literal Assign cpCmndCC with 1 line. You can also follow what says Lieve, just add a short blade and apply the action on the second slide. Also if you have objects on the slide which advance to the next slide and then not using OnExit measures.

  Thank you!

• Delete specific files of a project without deleting

  A common operation in the lab I work in is:

  Take a basic VI and change it to specific experimental purposes. The way we have done in the past is using the "save under...". "and selecting: 'Open additional copy' (and adding this file to the unique project that we use for all our work of LabView; probably a silly thing to do from the outset, only seen one project). However, we recently encountered a few problems with this (surprise, surprise) because a user has modified a Subvi, which was referenced by several rappclc. So, we decided instead start using individual projects and duplicate any relevant hierarchy to avoid changing the common files.

  The first time that we tried to do this, we used "save under...". "and"Double hierarchy,"then save the new files on a new project. However, the duplicate files were added somehow the original project as well. The result is that there are several conflicts that whenever files are responsible for each project. The obvious way to solve this problem is to delete the overlapping of the original project, but I can find no way of simply remove them without deleting the files! This is a serious nuisance. Any ideas anyone?

  RF-

  Thanks for the reply. I guess that's the way of the brute force to go, I was wondering if there was a more generally including remove the individual references, or several files. Thanks also for pointing out the mess of the icon.

  -jph

• 2015.3 - How to archive a project without proxies?

  Does anyone know how to exclude Proxy copy of images of projects archived using Project Manager?

  I mean, it's - the proxy files are not copied anymore, but when I open the project checked - it tries to connect to the proxy files that no longer exist. Is there a correct workflow to get rid of these before check-in?

  I'd appreciate any help!

  There is currently no way to permanently detach Proxies, but there is a way to stop the LinkMedia dialog asking for Proxy clips. When you receive the dialog box link media asking the location of proxy servers, click on offline everything and then save your project. When you reopen the project, he should ask is no longer for the missing Proxy clips.

• Convert CC CS6 project without having access to the CC

  I have a few CC project that I need to record until CS6, but I don't have access to the CC 2014, 2013 or 2012 if is there any type of free software or online converter that can do this? What I find just shows how to export from AE CC. I don't have the project files.

  If you have a perpetual license on a computer that doesn't run later versions or CS6 then you must ask for help. If you have a CC subscription you have access to all applications of CS6 forwards that are running on your system free of charge.

• How can I change a layer of text in an After effects project without opening it in After effects?

  Hello Adobe, I am a student of web developer, and I want to build a Web site that can help change the text layers of an animation made by After effects for Flash Professional

  so, how can I obtain or export an editable video project I can change by coding? I am a beginner in multimedia.

  Thank you

  Which is outdated Tech XFL has been scrapped and still, there were no significant work on the export of XML from the EI project. You must use scripts like pt_OpenSesame for projects to export to an editable text intermediate file or create your own set of tools, possibly including both expressions.

  Mylenium

• Audition project without mixing or rod import, import simply?

  Hello

  I have a project at the hearing and a video project in first.

  Separate them projects but for reasons that I will not go, I want to change them all at the same time. It would be so easy, if I could just import the audio project in first.

  Neither one will be finished first and so I can not work with mixed materials I want to change them at the same time. Like any normal audio and video work in first.

  Sometimes, the video must be moved to the sound, sometimes the sound is moved along with the video.

  Simple, I want to be able to import the project multitrack hearing as it is. Why this can be done I'm sure that will remain a mystery.

  Is there a way around this?

  Like in another xml format, then in the first?  I haven't found a way yet.

  Thanks remainz

  The option to export XML FCP in hearing working in 2014 the first but not the previous version.

  Fixed.

• Remove the application project without deleting

  I have an application with only 1 project, but it uses another another application as a library project. To develop easily, I added the project to the application, but I no longer need so I want to remove the project from my application, but the project should not be deleted.
  When I right click on the project, I don't see that delete the project, nothing that looks to close project or something...

  Select the project that you want to delete in the application browser, press the DELETE key and you will see another dialog box that asks you if you want to remove the project from the application (workspace) or remove it completely. In your case, option 1 is what you want to do.

  Timo

• I bought creative cloud for my class for Flash CS6 not knowing there is a difference and now I need to Flash CS6 how do I change? I can't complete my project without him.

  I bought creative cloud for my class for Flash CS6 not knowing there is a difference and now I need to Flash CS6 how do I change?

  Check the option 'Download previous Versions':

  https://helpx.Adobe.com/creative-cloud/help/install-apps.html

• RH7: PDF Generation of the project without going through Word

  All,
  I have a user who is try the trial of RoboHelp 7 and wants to know when to generate PDF output, is there a way to bypass the creation of a Word document and go straight to the PDF document. Word is still used this way to get a printed Documentation doesn't matter if a PDF file is made or not?
  
  Any info would be much appreciated.
  
  Thank you
  Greg

  Leon and everyone,
  Thanks for all your suggestions and comments. The HR user is dead set against using Word to generate the PDF file. In other research, we found RH7 and Flare to use Word as an intermediary in the generation of the PDF file. However, importing files FrameMaker in RH7 briefly gave us hope that the problem has been resolved by issuing to FrameMaker and PDF format. Much to our surprise, we found the RH7 can import FrameMaker files but cannot export to FrameMaker files.

  The user is in a different business unit and does not use HR. Since the release of FrameMaker is important to them, RH7, don't meet their needs.

  Thanks again for all your help.

  Greg Davis
  Senior technical editor
  Suitable ERP