so my computer crashed completely it keep having 000000 on whole screen
So my computer has 00000 on the screen and then it goes to another screen that has the codes but you can tell a bit what it says on it like normal reboot so I support on enter and then it returns to the screen 0000 again. I can't get to the screen to restore the computer. It's an HP a6077c please help
Hello
If a PC make sure the video cable is tight on both ends.
Check with HP, their drivers support and documentation online and ask in the Forums of HP for
known issues.
Support HP & drivers
http://welcome.HP.com/country/us/en/support.html
Contact HP
http://welcome.HP.com/country/us/en/contact_us.html
HP forums
http://h30434.www3.HP.com/PSG/
=========
You can use Mode without fail - repeatedly tap F8 that you start? If so, these should help:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html
Autoruns - free - see what programs are configured so that it starts automatically when
your system boots and you connect. Autoruns also shows you the complete list of the registry
and where applications can configure Auto-start for the files settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
================================================================
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html
-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) or the event for a second or less
time of the BSOD or event to provide more information about the possible cause - see TIP.
MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it a bit before and after the time of the event or BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html
------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
application goes down has occurred in your system. The information breaks down is extracted from the .wer
the files created by the Windows Error Reporting (WER) of the operating system component of each
time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.html
I hope this helps.
Tags: Windows
Similar Questions
-
my pc seems to have picked up some malware some body called on this subject there is say my computer crashed completely within 72 hours but I was still 20 minutes in bed at a time can help you
Hello paulfletcherza,
It's a scam; don't worry about this.
Microsoft does not contact you and / or allow someone else to contact you.
-
When you feed on desktop, the monitor displays the introductory hp screen, but crashes right there. No response from the keyboard when trying to diagnose (F9) or setup (f10). Hard drive removed and reconnected. Removed and reinstall the memory. Removed and reinstall the CMOS battery. No change. Fans work well. Tried to access the recovery CD, but the computer never gets beyond the introductory hp screen. Any suggestions?
Hello
If you can not enter the bios with the HDD installed then the hard drive is faulty.
Even if the disk hard is not initialized or not formatted with no boot record, modified records boot etc... You should always be able to enter the bios.
Caused by a virus? Not this type of error that the issue is before the hard drive is requested at startup.
-
My pagefile.sys has completely disappeared. This all started when the power failed and my computer crashed.I get the message that he was away, I went to the performance and settings and tried to change custom settings & re-start.No matter what I do, nothing works. I lost several hours of visiting sites for tips and nothing seems to help.I was told when re-boots WinXP it creates the new file pagefile.sys and I should delete the pagefile.sys file may be corrupted on the C drive.So I put the folders to show hidden files and delete pagefile.sys. I have re-set and tried to recover with no success.There is now absolutely no pagefile.sys on my C drive. Anyone know how I can get back my pagefile.sys?I want to get my virtual memory works again?Thank you very much in advance!
I'd start first with the chkdsk/r.
Don't forget - if you have a factory installed recovery Partition, fixmbr will scan it as the Master Boot Record that written XP will equal not the MBR installed by the factory, so first run chkdsk /r (did I say that already)?
Here are some instructions:
http://pcsupport.about.com/od/fixtheproblem/SS/RCONSOLE.htm
Where people have no XP bootable media, here are my instructions:
If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.
This is not the same as recovery disks that might have come with the acquisition of the system store.
You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.
The ISO bootable image file you need to download is called:
xp_rec_con. ISO
Download the ISO from here:
http://www.mediafire.com/?ueyyzfymmig
Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:
When you install ImgBurn, DO NOT install the Ask toolbar.
Here are some instructions for ImgBurn:
http://Forum.ImgBurn.com/index.php?showtopic=61
It would be a good idea to test your bootable CD on a computer running.
You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive. These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.
When you start on the CD, follow the instructions:
Press any key to boot from CD...
Installing Windows... going to pronounce.
Press 'R' to enter the Recovery Console.
Select the installation that you want to access (usually 1: C:\WINDOWS)
You may be asked to enter the password (usually empty).
You should be in the folder C:\WINDOWS. It's the same as the
C:\Windows folder that you see in Solution Explorer.
The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.
For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:
A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.
In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.
Running chkdsk is fine, even if he finds no problem. It won't hurt anything to run it.
Assuming your boot drive is C, run the following command:
CHKDSK C: /r
Let chkdsk finish to correct the problems, he could find.
It may take a long time for chkdsk complete or they seem to be "stuck". Be patient. If the HARD drive led blinks always, chkdsk is something. Keep an eye on the amount of the percentage to be sure that it is still making progress. It may even seem to go back sometime.
You must run chkdsk/r again until it finds no error to correct.
Remove the CD, and then type "exit" to exit the RC and restart the computer.
You have not to set the BIOS to boot the disk HARD since the CD won't be.
-
How can I keep having to login everytime I turn on my computer?
How can I keep having to login everytime I turn on my computer?
How can I keep having to login everytime I turn on my computer?
How to automatically log on a user account to Windows 7 startup
http://www.SevenForums.com/tutorials/377-log-automatically-startup.htmlTake a look at the tutorial above.
PLEASE read the WARNING section first, before you run the tutorial.
t-4-2
-
My computer crashed so I did a complete reconstruction. Creative cloud installed, installed Photoshop CC again (I have the license for it). I wanted to update that I did in Photoshop CC (2015) now my licensed copy of Photoshop is in a trial version and I have to buy again? Am I missing somethiMy computer crashed, did a complete reconstruction. Creative cloud installed, installed Photoshop CC. Wanted update me I did in Photoshop CC (2015) now my licensed copy of Photoshop is in a trial version and I have to buy again? Am I missing something?
Using creative cloud | Applications creative Cloud back to update evaluation Mode to 2015 CC
-
My computer crashed and having to reinstall 11 elements. Still, I have the authorization code, but can't find my disc. Where can I find on the line to reinstall? I checked with Adobe online, but can't find the download for this product. Help!
http://www.Adobe.com/downloads/other-downloads.html can help
-
Hello. I bought creative suite and it downloaded on my computer, however, a few days my computer crashed and I got of him having wiped, and so I lost access to the creative suite. I was wondering if there is a way I can re - download programs using my serial number?
-
My old PC crashed and I recently bought a new PC. However, I can't seem to activate my Photoshop CS2 on my new computer that I need to find a way to deactivare my old computer crashed. How can I disable without having access to my old computer?
You will not be able to activate the Photoshop CS2 you have on your drive. Adobe closed the activation servers.
You can, however, download the Photoshop package from the following Adobe page. Follow the specific instructions provided here and remember that you can not use your original serial number.
Error: Unavailable activation server | CS2, Acrobat 7, pass a hearing 3
-Christmas
-
I have Photoshop CS4 and I need to reinstall from CD after a computer crash and reinstall Windows 7 but it will not reinstall.
This could be to uninstall because it used entirely from the control panel of Windows 7. Can anyone help?
Uninstall what you can the normal way via the Control Panel, and then use the CS cleanup tool. Then try to reinstall. You might want to try an installation download rather than the disc if it continues to fail.
Adobe Creative Suite cleanup tool
helps resolve installation for CS3 thru CS6 and creative cloud problems
http://www.Adobe.com/support/contact/cscleanertool.html
CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
-
After the hard drive failed, I changed my computer and reinstalled LR5. I've updated LR5 a few weeks before my computer crashed, so for you my serial number is up-to-date. After reading some tutorials, I'm suspecting this disabling was not made before reinstalling... Recommendations on resettlement in this case?
You actually have a renewal LR5 problem or ask yourself what you need to do?
Download and install the update LR 5.6 from here: http://www.adobe.com/downloads/updates
Enter your LR 5 serial number and you should be ready. If something doesn't work, then, please describe the problem in detail.
-
Computer crashes randomly...
Computer began to 'hang up' or randomly freeze for periods of a few seconds to a few minutes when you use Windows Mail, Internet Explorer, Firefox, etc.
I tried to do a "restore" to factory settings on the advice of the manufacturer of the computer, but I keep having the same problems. Any advice or assistance would be greatly appreciated that I've already lost a week trying to fix this aggravating problem.Hello
What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
a small box in the lower-left - show for all users can check only).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
they loaded and much more. This exceptionally effective utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to startup automatically when your system boots and you
opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
start the settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
The command - line String, product name, file Version, company name, location in the registry or the file system,
and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
each driver in the list, additional useful information is displayed: load address of the driver, description,.
version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
own the software and drivers and all other main drivers that you have.Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
(Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Always check in the Device Manager - tab drivers version you install actually shows up. This
because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
pilot - reboot - check that it is installed and repeat if necessary.Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
I keep having a problem with this error message. Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. I tried everything the internet suggested but it continues to wreak havoc... Help, please... John.I cannot give other details that it has become very annoying
See "hang out":
-
iTunes keeps having an error 443
iTunes keeps having an error 443, but when I go to the store, there is no problem that anything does not work I can buy songs. I thought it was weird. I went to the computer and iTunes is configured to allow incoming connections. I even deleted and then added no changes he'll tell still occasionally 443 iTunes error unable to connect to the store.
I'm having this same problem on 2 different machines, desktop or laptop. No problem accessing the shop but the box appears repeatedly when ITunes is open but hidden (listening to the radio in the background).
-
RTFTrack has stopped working message followed computer crash
I have a Lenovo Edge 15 (got 11/03/15). Recently, when using SKYPE, making a video call, a box has developed indicating that RTFTrack has stopped working. The screen becomes white, then the computer crashes. So my call is disconnected, my computer restart and I have to log in again, open SKYPE, etc. What happened 5 times in the last three weeks. What can I do to fix this?
Apparently RTFTrack is from Realtek Semiconductor and RTFTrack appears in my Start Menu and begin to start my computer.
I appreciate your help with this. Thank you.
I updated my driver of the camera from the 20/03/15 update driver on Lenovo's Support page for my 15 Edge and the problem has not yet appeared. I'm keeping my fingers crossed.
Maybe you are looking for
-
How to open a new tab? None of these options work for me.
I tried:1. by clicking on the icon "+" next to my active tab2. go to "file-> new tab."3. using the hotkey "Ctrl - T".4. restart Firefox5 restart my computer (Windows 7 laptop)6. all the updates download-> restart my computer... Opening a link on the
-
Cannot use the network after the first time backup volume machine
Hello After the update to OS 10.11.4 my MACs are unable to use the network backup volume more. The volume of time machine is a device (RAID of LCM InXtron Taurus-S) external USB connected to a server of iMac (also running OS 10.11.4). Four MACs use t
-
Lenovo G500 blocked "Lenovo splash screen.
Hello I have Lenovo g500 core i7 ram6 ati radeon 8750 1 tb hard drive. It was like a month, this laptop hangs at the splash screen. I live in Iran and that the laptop is made in China. I searched the forums and found the solution 'removing the batter
-
No printer in the print, only icon in the "Add printer" Wizard dialog box
Windows XP Professional - Version 2002 - Service Pack 3 What would cause the print dialog box does not show printer, only the icon of the Add Printer Wizard? This occurs in only one (Eclipse) application on the PC. There are 20 printers in printers a
-
VN7 - 791 G-76GA questionable form to the seller
Hello community, first post here, I recently bought a couple of new laptops Acer E-series for a few friends on the market and were overall very pleased with the quality and performance, so in my search for a new laptop found an Acer Nitro that I am i