Constant 50% cpu on 8.1 window usage

Similar Questions

• Spoolsv.exe constant excessive CPU usage

  I am running Vista and after the upgrade to Office 2010, I have problems with spoolsv.exe following one of the 99% CPU all the time.  I have installed all the current updates, have you tried the "FixIt" and there is no persistent spool file in the spooler.  I also deleted all unnecessary printers just to remove any possibility there was a cause of the problem.  If I stop the service spooler CPU and when I restart the service remains low until I opened an application using a printer (Outlook, Word, Excel or practically anything else I opened).  Can anyone help?  Thank you!

  Hi ShermanJones,

  · What is the number and model of the printer that you are using?

  1. check any error code or error message in the event viewer: link: open Event Viewer: http://windows.microsoft.com/en-US/windows-vista/Open-Event-Viewer

  2 in safe mode, delete the printer and spool driver files. To do this, start Windows Explorer and delete all the files and folders in the following two folders

  Start your computer in safe mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

  Remove the printer and spool driver files:

  1. Click Start, type cmd and right click on cmd.exe, select run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. at the command prompt, type the following commands (press ENTER after each)

  3 Rename %systemroot%\System32\Spool\Printers Printers.old

  4 Rename %systemroot%\System32\Spool\Drivers\w32x86 w32x86.old

  5. output

• WUDFHost.exe excessive usage of memory and CPU in clean boot Windows 7

  I received occasional warnings that my memory is insufficient, despite a few open programs and 16 G installed. The Task Manager shows WUDFHost.exe consuming huge (but highly variable) amounts, generally well beyond 1 G and often 4 +, and also taking significant CPU resources. Problem persists restart and after disabling boot minimum all but Microsoft services. The machine is very new Dell Latitude E7450 processor and controller 64 bit running Windows 7 Enterprise Edition (service pack 1). All critical windows updates have been installed.

  After further investigation it appears this use of memory by increasing the WUDFHost continuously as long as the computer is running, even if the rest.

  You are right. It's the media base wireless.

  I updated my drivers of deployment with the cited drivers but the problem is still there. This could be linked with another installed driver that he was working on my test machine.

  I'll leave this disabling of the device until I find it.

  I'm happy to help.

  SEB

• Touchpad causing excessive use of CPU on Vostro 3558 (Windows 10)

  Hello.

  I am therefore unable to use Windows 10 because using the touchpad causes the process "System and compressed memory" to use more than 30% of CPU.

  I made a GIF showing what I mean:

  As soon as I start to scroll and move the pointer this process ("Sistema y memoria compartida" in Spanish, but it's the same, ntoskrnl.exe) raises my CPU usage, as you can see.

  I tried a lot of things, but I always have to go back to Windows 7 or Windows 8.

  -J' uses latest Touchpad drivers from the site Web of Vostro 3558.

  -J' tried 19.0.9.4 old synaptic drivers for Vostro 3558 by www.dell.com/.../DriversDetails

  -J' lastest synaptics.com generic drivers, tried both SMBus and IC2 versions, but they do not work at all (I even manually installed them in Device Manager).

  -This has happened the upgrade of Windows 8 to 10 of Windows and installs also in fresh Win10.

  Without drivers from dell (using default microsoft HID Driver and synaptics.com), I get no problems of use of CPU, but none of the gestures of course.

  I ask for help because I don't want to stay in Win7/Win8, and it drives me crazy.

  I fixed it messing with Vostro 3559 touchpad driver and driver Lenovo Yoga 3 1370.

  IN FACT, WINDOWS 8.1 HAS THE SAME PROBLEM, I HAVE NOT TRIED WINDOWS 10.

  THE STEPS I DID TO FIX IN WINDOWS 8.1;

  1. install the VOSTRO 3559 Windows 7 touchpad drivers:

  

  2. open Device Manager, open the section "Mice and other pointing devices" and right click on "Dell Touchpad" (it should be named only after having installed the drivers Vostro 3559). Select "Update driver software".

  3. click on "Let Me pick from a list of drivers on my computer"

  4. uncheck the "Show compatible hardware", go to "Synaptics" and select "Touchpad"

  

  5. now if you check your device manager there is NO HIGH CPU USE, BUT TOUCHPAD IS LAG like *, as on some XPS models.

  Now, why I did everything above? Because I can not install directly Lenovo Touchpad drivers without installing the first software of Vostro 3559. Synaptics software simply does not therefore not gestures.

  6. DOWNLOAD AND INSTALL THE WINDOWS 8.1 LENOVO YOGA TOUCHPAD DRIVERS 3

  

  Direct link:

  7. OPEN the DEVICE MANAGER AGAIN AND THE SAME THING, BUT THIS TIME WE will USE "LENOVO POINTING DEVICE" rather than "TOUCHPAD" OR "DELL TOUCHPAD"

  8. YOU're not in MEASUREMENT OF CLICK NOW AS a RESULT OF SWITCHING THE DRIVER, so YOU WILL NEED AN EXTERNAL MOUSE, OPEN TASK MANAGER AND CLOSE ALL SYNAPTICS and PROCESS RELATED of TOUCHPAD.

  9. GO TO C:\Program Files\Synaptics\SynTP AND OPEN SYNTPENH. EXE

  
  

  10. HERE, YOU HAVE A JOB ENTIRELY TOUCHPAD WITHOUT MAKING YOUR CRAZY CPU

  You don't need to do anything at the next start of Windows, it is already fixed.

  REFERENCE DELL FIX YOUR DRIVERS.

• Use of Photoshop CS6 constant 25% CPU with Nvidia (nvoglv64.dll) card

  Hello

  I use Adobe Photoshop CS6 (Cloud) and have the latest version installed. I have a high cpu problem when I want to zoom in the image, then sometimes the CS6 process cpu load is constant on 25%. I tried the graphic avancΘs in CS6 of light, normal, extended. With the setting of the light it doesn't happen so often, but sometimes he's there.

  My version of the driver is 310.90, but happen also with earlier versions, or with beta 313.96.

  My graphics card is a GeForce Gigabyte GTX 470 Super Overclock with two different monitors connected.

  Does anyone else have this problem?

  I want to buy a new Nvidia card in the near future, but it would be so good if the problem persists.

  Here you can see a screenshot of process Explorer.

  

  I can work more or less with CS6, that is not the problem, but the load constant cpu that bothers me.

  Maybe someone has any ideas to fix this?

  Thank you!

  Good bye

  Many Christmas thanks for your advice!

  In basic mode, the problem also sometimes.

  I tried almost everything to fix it. Reinstalling the driver; new installation of Windows 7 and CS6 to another disk; Another Geforce Graphics card - nothing helped.

  In the last days, I had the chance to get a new motherboard (Z68) with processor i7 2600 k. Before I had a P67 Board and an i5 processor 2600 k.

  I do not, but now it works like a charm. I can now use the maximum graphics settings in Photoshop CS6. :-D

  Maybe there is a problem with some drivers of the Council or the Council itself.

  Good bye

• Extremely high CPU with tabs open minimum usage?

  I just noticed that FF has a growing demand on the CPU... even on the start page... you can look at the use of the processor to climb.

  Nothing else ongoing, no updates or downloading... but continues to grow as if I were.

  I have usually 3 tabs open... Home (FF), Windows Live, and FB... over a period of 10-15 minutes... I see FF with an average of 600 + - beyond 1 GB of processor power... I solve this problem be frequently closing and reopening FF... but this isn't a long-term solution.

  Try to remove this add-on Bitdefender QuickScan 0.9.9.109, disable it perhaps not completely turn it off.

• Satellite P200 - 1EE 100% CPU with Toshiba Flash Cards usage

  Resource monitor shows 100% CPU usage constantly in recent weeks (no problem for the first 6 months that I have owned the machine) with 85 to 99% of my CPU used on 2 entries each shown as "Toshiba Flash Cards", no idea why and how I can sort this out as it slows everything down? Thank you very much

  Andy

  Hello

  The utility of Toshiba Flash Cards is a part of the Vista Toshiba value added package and it controls the functionality of buttons FN.
  Kody said already that it is advisable to reinstall the VAP to check if it would prevent the high utilization of the processor.

  You should also clean the operating system using the CCLeaner. After PPV remove you must run the CCLeaner to ensure that all of the VAP files have been deleted.

  Good bye

• Qosmio G20: CPU too high with video usage

  Hello

  I've got G20 (2.13 Ghz processor) and nVidia 128 MB GeForce Go 6600 and I noticed that when you run video that my CPU utilization goes up high enough. View tv goes up to about 80%, video in media player substantially the same, but the video clips on Web sites and sites with video banner Web can get up to 100%.

  I don't know if this normal that I had not really noticed before, but lately, with this hot weather, I found that on the days hottest occasionally my system stopped, probably because the fan may not follow.

  My question is if these ages CPU usage % are normal for this system, or I have some setting wrong that puts the load on the processor and not the graphics card. Can someone tell me if I can check how the video processing is done by the graphics card or how I can assure that this is the work and only in passing on overloading the CPU.

  Thank you very much.

  PS I am running the latest drivers video for this machine, obtained from the Toshiba draft.exe page.

  Hi William

  I had a lot of experiences with Qosmio G20 and activity of the CPU under pressure. With the use of the highest processor unit was never overheated just a little harder because of cooling fan.

  As you know Qosmio G20 is powerful multimedia and video unit problem described in your message is really strange. If you wrote that you don't l l notice that before, I assume your personal configuration is responsible for this. On this path, it is not easy to say why this is happening. Try to check the processes running and at the end all of them you don't need. On this way the CPU use should be much lower.

• No volumn Icon - no sound since replacing battery to the CPU, I have a Windows XP

  No icon volumn - no sound since replacing battery to the CPU. I have a Dell Windows XP.  I tried to solve this problem for more than 6 hours, it must help.  If I try to install an icon of volumn - message is - not installed Volume control program.  In the Web sites that I'm not sure that you can trust, they say I need a file Sndvol32.exe (?), or a microsoft update download driver (?).  My computer is 7-8 years, but I installed more Ram.   Appreciate your help.

  Windows Explorer is not to be confused with Internet Explorer (which I think you open).

  On your desktop, right-click on 'My Computer' and choose the second option in the menu drop-down (not on my XP PC, so don't remember his name). Who should then open WIndows Explorer and you can follow the instructions in my other post. Or double-click my computer, and you get a simpilar window.

  See you soon,.
  Jerry

• Iexplore.exe - USE HIGH CPU - 50% (dual processor) - Windows Vista Home Premium

  Help, please!

  My HP dv9000 is slow.  PLEASE LET ME KNOW WHAT INFO YOU NEED ME!  In the Task Manager, under the terms of 'process', it indicates that there are FOUR INSTANCES of internet explorer running, but I only have one window open (with a tab).  I hear my hard drive constantly running and it drives me crazy (and make me cry for my poor computer).  The 4 iexplore.exe (IE8) use respectively 110 000 - 82 300-78 000 - and 8000 K.  Is this normal?

  I don't know if we are more concerned by the "CPU" column or in the column "memory (private beach).  In the CPU column, HP Digital Imaging Monitor uses 50.  Is this normal?

  Please, I just want my computer to be able to relax.  I'm afraid it's going to explode (not literally, but that's what it looks like!).

  Thank you
  Elizabeth

  Hello Elizzee,

  Thank you for posting.  It seems you might have a form of hard-ware on your computer.  I have a useful link to a scan of the free system for viruses, malware and spyware listed below.

  http://OneCare.live.com/site/en-us/default.htm

  You can also do a full scan with your antivirus program on your computer installing later.

  Please let me know if this has been helpful for you.

  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Svchost.exe - k netsvcs process uses 50% CPU at startup of Windows 7 PC

  Hello

  Can someone advise? I have a 32 bit Windows 7 laptop and when it is on, svchost.exe - k netsvcs will run and make use of 50% or more of the CPU and finally up to several hours.

  It is a very annoying problem where even if I complete the process using the Task Manager, it reappears shortly after. A reboot also sees a resumption of the process.

  I traced this problem to the (wuauserv) Windows Update I had to turn off to avoid the recurring problem. But as this is not an optimal solution, I'd quite like to know how to solve this problem permanently.

  Thank you

  Martin O'Shea.

  The manual installation of updates that you have to change your update settings to never check the updates and restart the machine first.

  Make sure that KB3020369 is installed, otherwise install it manually.

  Win - 7 32-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=46827

  Win - 7 64-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=46817

  Then install manually KB3172605 M$ plays cat and mouse with this download to update if the link and the download does not work, you will need to use Internet explorer and get instead of the catalog

  http://catalog.update.Microsoft.com/v7/site/install.aspx

  https://support.Microsoft.com/en-us/KB/3172605

  Win-7 32-bit

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=53335

  Win-7 64-bit.

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=53332

  After your windows update settings back to what you had before, and manually check the updates and the rest should appear shortly.

  If you need Visual AIDS to refer to this

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-problems-read-this-first/28147a5f-B0B0-480b-bed9-834a2da7a375

• Difference in consumption of RAM/CPU to editions of Windows 7.

  I'll buy Microsoft Windows 7. I have a PC pretty weak i3 Intel with 4 GB of RAM, and my question is: is there a difference between the consumption of RAM of the editions to hardcode as an ultimate and lower than at home. And if there is such a difference what size is?

  Family Premium is not really lower. The main difference between Home Premium and

  Pro/Ultimate's security features, a maximum amount of RAM that can be used and a couple of

  various related functions.

  Home Premium is limited to 16 GB RAM max.

  -32 bit Windows does use less RAM idle than 64-bit. How much I don't know, but

  my 64 bit system "is inactive" with about 1.65 GB of RAM in use. It's with about 60 ongoing process,

  and I do not use AERO or it would be a little more.

  -32-bit Windows is not able to access more about 3.25 GB of RAM.

  EDIT: I think that if Pro/Ultimate use more cpu idling, there would be negligible.

  .

• Constant stop - 0xF4 on new generation - Windows 7 errors

  Hi all

  I get the BSOD 0xF4 at least once or twice a day. I can boot Windows without problem. It appeared to a next day to up my new build and running.

  I tried to put back all the cards, memory and cables without result. All the drivers appear to be up-to-date. The system has crashed twice now by watching videos on youtube if that helps?

  The last verification error was: 0x000000f4 (0xfffffa800a677b30, 0xfffffa800a677e10, 0 x 0000000000000003, 0xfffff800023818b0)

  Link (via skydrive) minidump files:

  https://SkyDrive.live.com/redir.aspx?CID=8be30cc366a306d7&RESID=8BE30CC366A306D7! 393

  System details:
  CPU: Intel Core i7 2600 k
  Motherboard: ASRock Extreme 3 Gen 3
  RAM: Kingston HyperX 1600 Mhz DDR3 2 x 4 GB (KHX1600C9D3X2K2/8GX)
  GFX CARD: 1280 MB MSI GTX 570 Twin Frozr III
  Primary transmission: 120GB OCZ Vertex 3
  Secondary drive: Western Digital Caviar Black 1 TB (WD1002FAEX)
  OS: Windows 7 Home Premium

  Hello

  Results verified BlueScreenView WinDBG / DumpCHK.
  
  The Bug_Check were all F4 wininit.exe or CAUSE csss.exe which are components of Windows
  which means something else hunt in error.

  BugCheck F4, {3, fffffa800abf8b30, fffffa800abf8e10, fffff800023dc8b0}
  Probably caused by: wininit.exe
  FAILURE_BUCKET_ID: X64_0xF4_C0000005_IMAGE_wininit.exe
  BUCKET_ID: X64_0xF4_C0000005_IMAGE_wininit.exe

  BugCheck F4, {3, fffffa800ac60b30, fffffa800ac60e10, fffff800023868b0}
  Probably caused by: csrss.exe
  FAILURE_BUCKET_ID: X64_0xF4_IOERR_IMAGE_csrss.exe
  BUCKET_ID: X64_0xF4_IOERR_IMAGE_csrss.exe

  ------------------------------------------------------------------------------------------------------------

  See this article:

  You receive various Stop error messages in Windows 7 or in Windows Server 2008 R2 when
  you try to resume a computer that has a large hard drive SATA.
  http://support.Microsoft.com/kb/977178

  -----------------------------------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  ================================================================

  BCCode: F4 0x000000F4

  Check and reinstall the cards memory and cables (at both ends where possible) actually remove and
  replace - do not just tight. On a laptop computer on all you can do is reinstall the memory and possibly check
  the contacts/connection to the hard drive. Memory could be the problem, so if you have more than 1
  stick swap them in and out to see if the problem follows a stick or try the new memory. Antivirus/anti-
  spyware/security programs have been known to cause or have a role in this matter.

  More general patch updates day and low level chipset BIOS drivers and other software to control.
  Also check the wiring on the hard drive.

  BCCode: F4 0x000000F4<-- read="" this="">
  * 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

  ==================================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen
  of death "crashes and displays the information about all crashes in one
  Table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista (also Windows 7) Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Crescent of cpu and memory under windows 2003

  Hello

  I have a windows Server 2003 R2 SP2 virtual machine with 1 cpu and 4 GB of memory.

  Can I increase cpu 1 to 4

  In the past, I've increased cpu 2 to 4 on similar without any problem, but not sure machines ranging from 1 to 4 cpu

  In the past, take action:

  Turn off the virtual machine

  Take snpshot

  increase the number of cpu 2 to 4

  increase of 2 to 4 GB memory

  Start the virtual machine

  Check Device Manager to make sure that the additional processors are visible

  Check the additional memory is visible

  Remove the snapshot

  Instant return if the process fails

  What also vmware WARNING "change the number of CPUs after the guest OS was isntalled can make your virtual machine unstable."

  Thank you

  Hello

  I did this operation, hundreds of times, no problems at all. Problem may occur when you reduce several CPU single-processor. Going from simple to several CPU no problem at all. Of course good to have a clone\snapsot of virtual machine before you make any change :-)

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• LED constant name does not match between window Panel and attribute popup

  Edit a range of gui (file .uir) in CVI, I double click on a LED and change the name of the constant.  The name in the Panel summary attribute on the right of the IDE indicates the wrong name.  What causes this?  I had copied and pasted the other LEDs before editing their names.  It seems that the copy and paste operation has confused CVI.

  I used CVI 10.0.0.  I called support and the support engineer was able to reproduce the bug on 10.0.0, but not on 10.0.1.  So I upgraded, and the bug disappeared.  I think that the problem occurred in version 10.0.0 when I exceeded 256 LEDs.