Contact SIGNAL not found

Similar Questions

• IPhone unlocked 6 works on all carriers of the United Kingdom, but will not activate on mobile of delight that use EE network sim works in my 4S but 6 says not found carrier shows 3 bar on signal but will not activate the phone?

  uunlocked iphone6 works on all networks 4uk but does not work on mobile thegy delight use EE network it shows 3 bars of signal, but no name even sim card works fine in my 4S but bearer of 6 sows not found mobile delight just advise manual setting of the bu AFN will still not be enabled?

  any help appreciated MikeC

  Contact the carrier. In all cases the pleasure is not a carrier official iPhone.

• You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

  What does this message mean? I get when I click on the icon to evaluate files on another of our computers. "You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found. »

  The other computer has not been configured to allow remote access to this folder from your account.  You'll want to go to this other computer, right click on the folder that is shared and go to properties, then set the appropriate security settings to allow access.

• I received a phone call this morning and I have not found a way to contact you.

  * Original title: Robinson

  I m looking for a man who phoned me this morning, I don't remember his name was 'Robinson' or similar.

  Your best customer.

  (I have not found another way to communicate with you, sorry!)

  Contact me :)

  Hello

  1. Is that what you received a phone call claiming Microsoft?
  2. You have problems with your computer?

  Microsoft or our partners make unsolicited phone calls (also known as the telephone canvassing) you charge for security patches or software.

  I would like you to check out the links for more information.

  Avoid scams to phone for tech support

  How to combat scams to phone for tech support

  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support&WA=wsignin1.0

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information helps. If you have any questions, please let us know.

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A

• Device not found Airport Extreme

  We have an airport extreme connected generation via Ethernet to a switch that provides network access to our entire House (about 10-15 connections) via wifi access points all Ethernet hard wired (linksys + apple) and a direct wire to a PC. Airport extreme is the dhcp and is connected to a gpon fiber using PPPoE.

  The problem now is that the AirPort Extreme disappears from the airport on iOS Mac utility and Windows, it is found however the network and the Internet continues to operate normally on all connected devices. I can also continue ping on the router.

  I have reset the AirPort Extreme to the default settings, but the problem continued...

  I tried to unplug all devices and have AirPort Extreme only connected to him have the fiber but the problem persists...

  no idea how I can fix this problem?

  You describe a known problem with Back to My Mac which first appeared around July 13. The problem manifests itself in a message "Device not found" meant to be displayed in triangular AirPort your AirPort base station with a yellow icon utility, while the router of the device functions others continue to work normally.

  If you use an airport Time Capsule, backups will not work using that device or USB hard drive units connected to it.

  Apple will only be able to solve this problem, so all you can do is wait for them to do. If you want to contact them to tell them about it, using the contact Support link.

  There is a solution: on a Mac, open AirPort Utility and select file > configure other...

  For each of your routers Apple AirPort Base Stations serving their respective networks: its IP address and password (if you don't know either of them, read the Note that follows the horizontal rule below). Then, on the tab of the Basic Station , delete all the entries in the Back to My Mac using the 'negative' button, then click on Update.

  Which must be re-established appearance of this base station in AirPort Utility, as well as in a side bar of the Finder, if all shared disks are plugged on. It will also restore possibility of Time Machine to save on these discs, if this has also been a problem for you.

  If this seems to imply that you will not be able to use Back to My Mac until Apple fixes it, you are probably right. Well to diagnose problems of the CCMM is tedious work that I have not yet finished.

  Apple does not participate on this site except in a very limited way, so don't expect is not a response from them, here or elsewhere for that matter. We'll just have to wait for them to fix it.

• Work around for server not found problems on FF36

  I found a work around for all people with server not found problems with FF36.

  If you manually set your DNS network adapter to an external DNS server (as opposed to your local ISP) then the problem disappears. I set mine to use the google DNS servers:

   Preferred: 8.8.8.8
   Alternate: 8.8.4.4
  

  No idea why this works, but it is 100% success on my desktop PC, whereas before I could not connect to a Web page with FF36 without updating the multiple page and a lot of frustration, although FF35 was fine and back to FF35 turnover was as beautiful.

  Something has changed in FF36 and how it manages the DNS or the mode of operation with certain network cards.

  There is nothing to do with the Add - ons, profiles or software firewall as I tried all these things and that the DNS change makes a difference. I even copied on a full profile and directory of program files to work for Mozilla on my laptop which saw no problem and the problem still exists on the desktop, which is why I started watching the network adapater since everything between the working PC and no work was identical.

  I hope that this will help the developers to identify the real cause of the problem and fix it in the next version.

  AG - your problem looks different you had FF36 work.

  Considering that the problem of many of us that when we spend FF35 in FF36 we get a lot of server is found errors when you try to load Web pages.

  Sometimes they load and then they stop loading and then if you click Refresh a lot that they sometimes then charge again, or you have to wait a minute or two and then they load.

  For some reason any using an external DNS server {see # 698286 answer _{~ J99}} has stopped this problem completely, as does return to FF35.

  We need an expert on to Mozilla DNS resolution to focus on this. [*] ^{See my note under ~ J99} Seems to me that you use an external DNS server adds some latency to name resolution and maybe this is necessary for the network card in the PC that encounter this issue to resolve the addresses of Web page.

  Obviously something changed in FF36 FF35 to cause this problem. I'm open to Mozilla contact me by E-mail if they want me to try something else to help pin it down.

  *

  change Note the John99
  Mozilla can consider WHETHER we are able to provide evidence to support this. We must be able to complete a report of bug with right steps to reproduce (STR). Developers should be able to see themselves the problem before we can expect to focus on this.

• Performance of Time Capsule and "device not found".

  I am now on my 2nd TC average weeks because I thought the first was broken-, but I get the same questions on the second >

  1. A Wi - fi connection is very intermittent.  Seat 3 feet of the TC, I can get 450Mbps on my iPhone 6 and 5 minutes later her stockings to 2Mbps or less (measured on the Wi - Fi Sweetspot app).  Similarly, the speed of connection internet test ranging from 20-30Mbps until 0.3Mbps not it depending on the strength of the wifi.
  2. Air utility sometimes connection works and see the TC.  But often it is not.  First he asks the password, maybe 2 or 3 times.  Can I get a yellow triangle showing on utility AP with "Device not found" and the only option is to Forget.  The TC IS still there, but since I use it for ethernet and wifi internet access still works because I am always online.

  So, what speeds SHOULD I get the Wi - Fi, 3 feet of the TC - I would have thought higher?

  Why WiFi speed decreases considerably, sometimes in the same place?

  Why the Airport utility is not the device, when it is still there?

  Is this a general problem with TCs?  Is this another duff, one back?

  Thank you

  Update you the firmware to 7.7.7 in the TC?

  If all tests performed 7.7.7 then downgrade the firmware to 7.7.3 as he could work much better.

  If it still fails I just return it.

  They seem to vary a lot in quality of construction. Some work OK but many have problems... and when you Exchange to the same store you get another from the same lot.

  There are a lot of articles on wireless diagnosis.

  for example, from your Mac.

  Use Wireless Diagnostics helps you troubleshoot Wi - Fi on your Mac - Apple Support

  Follow the wireless in a few days... and use ethernet if possible... Wireless is never a reliable substitute for ethernet.

  iOS

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

  A lot of wireless issues with each new version of iOS... he could so your phone that is the problem, not only the TC.

  https://www.YouTube.com/watch?v=j4qgH8uyOk0

  You should check how wireless is around you and the intensity of the signal of all devices.

  I also need to know the exact of the TC configuration and your network if you want to find the problem. Although problems with the Wi - Fi in the TC would be not at all unusual.

• Contacts will not sync via iCloud - once again!

  I get are leaning on the previous, mostly by now quite old, posts on this topic, but have not found answers that helped me.

  I have an iPhone 5s and a Mac mini with Mountain Lion (10.8.5). I have Contacts selected in iCloud on both devices, but the Contacts now does not synchronize anyway.

  I looked in iCloud.com. My contacts are there, but they are as they appear on my iPhone and they were on my Mac, a few days ago, not as they appear now on my Mac after some additions and changes.

  What can I do?

  On the iPhone, tap settings > iCloud > Contacts.

  Disable the Contacts then turn it back on.

  On Mac, open System Preferences > iCloud. Clear the Contacts check box, and then reselect it.

  Give a few minutes of re iCloud synchronize data.

• Contacts does not synchronize to a device Android on Skype version 7.14.0.305

  Hello

  I am running with a Samsung Galaxy S4 on Android version 5.0.1.

  My problem:

  I came across a problem where my Skype contacts are not synchronized to my Skype Android's version. It shows probably 1/4th of my contact list and for each contact on my list appears not as a contact and that they should be added.

  What I tried:

  I tried to uninstall and reinstall Skype on my device four times

  I tried logging with my Skype ID and my ID Microsoft

  Under S4 settings > accounts I tried to synchronize my contacts like this

  I would like to know if it is something that is on my end and what should I so how do to try to solve this problem. I searched through many threads different media like this, many of them from 2012 to 2014 and so far I have not found one thing that works.

  Thank you.

  Problem solved by operators of Skype.
  More info: http://heartbeat.skype.com/2016/09/problems_with_accessing_contac.html

• I have not found my video rental

  I have not found my video rental

  See the article-

  About rent movies on the iTunes Store - Apple Support

  You can contact iTunes Support cat - they will solve the problem!

  https://www.Apple.com/support/iTunes/WW/

• Pro 608: HP 608 Pro will not boot-Boot device not found

  I got my new Pro 608 and installed my software after upgrade to Windows 10. Do okay, but the next day, nothing works!

  Keep saying that Boot Device not found!

  Not sure but it could be HP shield encryption does not work well? now, he cannot read the HD? or HD shot?

  I tried to restore default - but still does not work. Now other bios diagnostics no longer work. That is to say he's corrupt!

  Tried to update the bios, but doesn't seem to work. The bios still say 7/2015. I tried to update the bios 9/2015. Also used 7/2015 bios, bios Diagnostics but still does not.  I use a USB port and a connector USB Belkin C - I think not that it really is booting from the USB key to install the Bios.  I set the Bios to activate the firmware-C update.

  Sue, the best thing you can do since it is a new Tablet is contact HP Support directly for warranty repair.

  Most likely, they will replace the unit.

  Contact HP worldwide | HP® official site

• Skype name not found

  I tried to add 3 different friends that the nicknames I know and I cannot for some reason any.

  I get 'not found Skype name' and 'no matches found' for the display name.

  What happened to the old way of looking for people? I haven't used Skype for a while, but I remember adding of contacts was easier. Did you have to change and make it more complicated and frustrating? I mean, there is nothing wrong with that, you do it on purpose just to annoy people?

  Have you checked your status? It is "online"?

• ProBook 450 G2, core-i5: operating system not found

  Hello

  I expanded the partition of my C drive with force to upgrade to windows 10 since an iso file... then after restarting, I am facing the problem "an operating system is not found. Please remove storage external use... »

  I tried to boot from the start menu by pressing F9 while restarting, but no solution met! I also tried to boot from EFI file, but does not because no options that are there found.

  The disc is also OK, checked the BIOS settings option.
  
  Now what to do?

  Spoiler (Highlight to read)

  Asif_Ahmed_Joy

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post about the operating system not found since the Win10 Upgrade failed and tried to help.
  
  One of the things that happened during the upgrade:

  (1) it mostly completed but failed in the writing of the new boot loader files

  (2) it failed early in the upgrade, screw up your PC as well

  Allows to process 1) first - by recreating the bootloader files.

  You need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  Once you have that, please download and create the Win10 installation media from this link: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10
  
  Note that when you download and build install media, the default tool corresponding to what is already installed on your PC (as in home for the House, and 64-bit to 64 - bit).  While you CAN change these settings, are NOT. If you do, the media that results will be different and will force you to enter a NEW product code.
  
  Boot from the media that you have created and follow the instructions in this link: http://www.tenforums.com/tutorials/2294-advanced-startup-options-boot-windows-10-a.html
  
  You will need to go to the Advanced Options screen and click on startup repair.  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  If this does not work, then we are on option 2) - which is not good news.

  While Microsoft says there is no risk in the upgrade of Win10, because they allow you to believe that you can always return to your BONES and the original installation program within 30 days, the ugly fact of the matter is that the Win10 GoBack feature turned out to be unreliable - and when she fails, she can let machines in a State corrupted - that does not always happen , but it happens often enough to be a problem and you will get no warning beforehand that he goes to the trash your PC!
  
  If this is not enough, the Win10 upgrade is known, in some cases, corrupt partition recovery stored by the OEM that built the original machine.  It's pretty much guarantee that no HP recovery will work.

  What will work restores your computer to its original factory state using HP recovery media.
  
  It is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!
  ---------------------------------------
  However, HP customer care is generally not available on weekends, so you will have to wait until Monday to contact them.
  ---------------------------------------

  Don't forget to read through the material in the linked thread before attempting the recovery: http://support.hp.com/us-en/document/c00707939
  
  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Re: New SD-R6472 satellite 1800-100 - player target not found

  Hi fans of Toshiba

  I have a Satellite 1800-100 and bought a Player DVD SD-R6472
  I downloaded the SD-R6472 csel changer program but cannot execute it.
  It says "target drive is not found.

  I have already download the latest version of the bios

  Anyone know what to do next?
  It would be much appreciated if someone could help me on this

  Best regards
  Chris

  There is a simple explanation; the firmware that you use is simply not compatible with your SD-R6472 drive.

  I don t think you will succeed to Flash the drives settings.
  Is that these tools is not available on the Toshiba page and I doubt that any software 3rd party would be able to do this

  Before you buy a CD/DVD drive, you must make sure that such ODD would be compatible with your laptop.
  In my manual, I have found information on compatible players.
  Maybe your user manual would provide info on the STRANGE compatible too
  If this isn't the case, then you should contact the Toshiba ASP for information on compatible CD/DVD players.

  Have a nice Weekend