Context with IPSec VPN
Hi friends,
I have a question for the scenario below.
I need to create a Site-Site IPSec VPN in the firewall mode.
Is it possible to create the tunnel.
I have ASA 5510 Security Plus with Ver 8.3
Thanks in advance.
In your case, you ASA in multiple-context to allow VPN to the amp.
There is no problem with that.
The only restrictions are that an ASA in multiple context will not work as a VPN endpoint (apart from a tunnel admin)... but you can pass the traffic or VPN traffic as in ASAs in simple mode.
Federico.
Tags: Cisco Security
Similar Questions
-
Problem with IPSec VPN ISA500 &; login questions (multiple devices)
I have a Cisco ISA500, we use for connection with IPSEC VPN of some products apple (MacBook Pro and iPad). We can operate randomly once in a while, but it fails most of the time of negotiation. Someone at - it suggestions on what I can do to make this work?
I did test it on my Linux machine and it does not when I had configured default settings. I had to change the NAT Traversal for UDP CISCO on the Linux machine for the connection to work.
14/04/03 20:54:13 - WARNING - IPsec VPN: msg = 'groupname' [48] XXX.XXX.XXX.XXX #59: quick mode attempt fails, please check if IKE/transformation/PFS local are the same as remote site; (pluto)
2014-04-03 20:54:13 - WARNING - IPsec VPN: msg = 'groupname' [48] XXX.XXX.XXX.XXX #59: max number of retransmissions (2) reached STATE_AGGR_R1. (pluto)
2014-04-03 20:53:30 - warning - IPsec VPN: msg = 'groupname' [47] XXX.XXX.XXX.XXX #58: quick mode attempt fails, please check if IKE/transformation/PFS local are the same as remote site; (pluto)
2014-04-03 20:53:30 - warning - IPsec VPN: msg = 'groupname' [47] XXX.XXX.XXX.XXX #58: max number of retransmissions (2) reached STATE_AGGR_R1. (pluto)
2014-04-03 20:53:03 - WARNING - IPsec VPN: msg = 'groupname' [48] XXX.XXX.XXX.XXX #59: STATE_AGGR_R1: sent AR1, expected AI2.; (pluto)
2014-04-03 20:53:03 - WARNING - IPsec VPN: msg = 'groupname' [48] XXX.XXX.XXX.XXX #59: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:53:03 - WARNING - IPsec VPN: msg = 'groupname' [48] XXX.XXX.XXX.XXX #59: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:53:03 - WARNING - IPsec VPN: msg = 'groupname' [48] XXX.XXX.XXX.XXX #59: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:53:03 - WARNING - IPsec VPN: msg = 'groupname' [48] XXX.XXX.XXX.XXX #59: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:53:03 - WARNING - IPsec VPN: msg = 'groupname' [48] XXX.XXX.XXX.XXX #59: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:53:03 - WARNING - IPsec VPN: msg = 'groupname' [48] XXX.XXX.XXX.XXX #59: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:53:03 - WARNING - IPsec VPN: msg = 'groupname' [48] XXX.XXX.XXX.XXX #59: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:53:03 - WARNING - IPsec VPN: msg = 'groupname' [48] XXX.XXX.XXX.XXX #59: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:53:03 - WARNING - IPsec VPN: msg = 'groupname' [48] XXX.XXX.XXX.XXX #59: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:53:03 - WARNING - IPsec VPN: msg = 'groupname' [48] XXX.XXX.XXX.XXX #59: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:53:03 - WARNING - IPsec VPN: msg = 'groupname' [48] XXX.XXX.XXX.XXX #59: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:53:03 - WARNING - IPsec VPN: msg = 'groupname' [48] XXX.XXX.XXX.XXX #59: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:53:03 - WARNING - IPsec VPN: msg = XXX.XXX.XXX.XXX:43810 package: received vendor ID payload [Dead Peer Detection]; (pluto)
2014-04-03 20:53:03 - WARNING - IPsec VPN: msg = XXX.XXX.XXX.XXX:43810 package: received vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]; (pluto)
2014-04-03 20:53:03 - WARNING - IPsec VPN: msg = XXX.XXX.XXX.XXX:43810 package: regardless of the payload of unknown Vendor ID [16f6ca16e4a4066d83821a0f0aeaa862]; (pluto)
2014-04-03 20:53:03 - WARNING - IPsec VPN: msg = XXX.XXX.XXX.XXX:43810 package: received meth payload [draft-ietf-ipsec-nat-t-ike-02] Vendor ID = 107, but already using method 109; (pluto)
2014-04-03 20:53:03 - WARNING - IPsec VPN: msg = XXX.XXX.XXX.XXX:43810 package: received meth payload [draft-ietf-ipsec-nat-t-ike-02_n] Vendor ID = 106, but already using method 109; (pluto)
2014-04-03 20:53:03 - WARNING - IPsec VPN: msg = XXX.XXX.XXX.XXX:43810 package: received meth payload [draft-ietf-ipsec-nat-t-ike-03] Vendor ID = 108, but already using method 109; (pluto)
2014-04-03 20:53:03 - WARNING - IPsec VPN: msg = XXX.XXX.XXX.XXX:43810 package: received Vendor ID value = 109 payload [RFC 3947] method; (pluto)
2014-04-03 20:53:03 - WARNING - IPsec VPN: msg = XXX.XXX.XXX.XXX:43810 package: received vendor ID payload [Cisco-Unity]; (pluto)
2014-04-03 20:53:03 - WARNING - IPsec VPN: msg = XXX.XXX.XXX.XXX:43810 package: received vendor ID payload [XAUTH]; (pluto)
2014-04-03 20:52:20 - WARNING - IPsec VPN: msg = 'groupname' [47] XXX.XXX.XXX.XXX #58: STATE_AGGR_R1: sent AR1, expected AI2.; (pluto)
2014-04-03 20:52:20 - WARNING - IPsec VPN: msg = 'groupname' [47] XXX.XXX.XXX.XXX #58: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:52:20 - WARNING - IPsec VPN: msg = 'groupname' [47] XXX.XXX.XXX.XXX #58: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:52:20 - WARNING - IPsec VPN: msg = 'groupname' [47] XXX.XXX.XXX.XXX #58: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:52:20 - WARNING - IPsec VPN: msg = 'groupname' [47] XXX.XXX.XXX.XXX #58: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:52:20 - WARNING - IPsec VPN: msg = 'groupname' [47] XXX.XXX.XXX.XXX #58: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:52:20 - WARNING - IPsec VPN: msg = 'groupname' [47] XXX.XXX.XXX.XXX #58: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:52:20 - WARNING - IPsec VPN: msg = 'groupname' [47] XXX.XXX.XXX.XXX #58: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:52:20 - WARNING - IPsec VPN: msg = 'groupname' [47] XXX.XXX.XXX.XXX #58: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:52:20 - WARNING - IPsec VPN: msg = 'groupname' [47] XXX.XXX.XXX.XXX #58: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:52:20 - WARNING - IPsec VPN: msg = 'groupname' [47] XXX.XXX.XXX.XXX #58: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:52:20 - WARNING - IPsec VPN: msg = 'groupname' [47] XXX.XXX.XXX.XXX #58: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:52:20 - WARNING - IPsec VPN: msg = 'groupname' [47] XXX.XXX.XXX.XXX #58: attribute OAKLEY_KEY_LENGTH not preceded by the OAKLEY_ENCRYPTION_ALGORITHM attribute. Attribute OAKLEY_KEY_LENGTH. (pluto)
2014-04-03 20:52:20 - WARNING - IPsec VPN: msg = XXX.XXX.XXX.XXX:58320 package: received vendor ID payload [Dead Peer Detection]; (pluto)
2014-04-03 20:52:20 - WARNING - IPsec VPN: msg = XXX.XXX.XXX.XXX:58320 package: received vendor ID payload [draft-ietf-ipsec-nat-t-ike-00]; (pluto)
2014-04-03 20:52:20 - WARNING - IPsec VPN: msg = XXX.XXX.XXX.XXX:58320 package: regardless of the payload of unknown Vendor ID [16f6ca16e4a4066d83821a0f0aeaa862]; (pluto)
2014-04-03 20:52:20 - WARNING - IPsec VPN: msg = XXX.XXX.XXX.XXX:58320 package: received meth payload [draft-ietf-ipsec-nat-t-ike-02] Vendor ID = 107, but already using method 109; (pluto)
2014-04-03 20:52:20 - WARNING - IPsec VPN: msg = XXX.XXX.XXX.XXX:58320 package: received meth payload [draft-ietf-ipsec-nat-t-ike-02_n] Vendor ID = 106, but already using method 109; (pluto)
2014-04-03 20:52:20 - WARNING - IPsec VPN: msg = XXX.XXX.XXX.XXX:58320 package: received meth payload [draft-ietf-ipsec-nat-t-ike-03] Vendor ID = 108, but already using method 109; (pluto)
2014-04-03 20:52:20 - WARNING - IPsec VPN: msg = XXX.XXX.XXX.XXX:58320 package: received Vendor ID value = 109 payload [RFC 3947] method; (pluto)
2014-04-03 20:52:20 - WARNING - IPsec VPN: msg = XXX.XXX.XXX.XXX:58320 package: received vendor ID payload [Cisco-Unity]; (pluto)
2014-04-03 20:52:20 - WARNING - IPsec VPN: msg = XXX.XXX.XXX.XXX:58320 package: received vendor ID payload [XAUTH]; (pluto)Hi rich,
What version of firmware you used before upgrade? You upgrade to 1.2.19 and now this works?
Thank you
Brandon
-
Easy VPN with IPSec VPN L2L (Site - to - Site) in the same ASA 5505
Hi Experts,
We have an ASA 5505 in our environment, and currently two IPSec VPN L2L tunnels are established. But we intend to connect with VPN (Network Extension Mode) easy to another site as a customer. Is it possible to configure easy VPN configurations by keeping the currently active IPSec L2L VPN(Site-to-Site) tunnels? If not possible is there any work around?
Here's the warning we get then tried to configure the easy VPN Client.
NOCMEFW1 (config) # vpnclient enable
* Delete "nat (inside) 0 S2S - VPN"
* Detach crypto card attached to the outside interface
* Remove the tunnel groups defined by the user
* Remove the manual configuration of ISA policies
CONFLICT of CONFIG: Configuration that would prevent the Cisco Easy VPN Remo success
you
operation was detected and listed above. Please solve the
above a configuration and re - activate.
Thanks and greetings
ANUP sisi
"Dynamic crypto map must be installed on the server device.
Yes, dynamic crypto is configured on the EasyVPN server.
Thank you
-
Problem with IPsec VPN between ASA and router Cisco - ping is not response
Hello
I don't know because the IPsec VPN does not work. This is my setup (IPsec VPN between ASA and R2):
my network topology data:
LAN 1 connect ASA - 1 (inside the LAN)
PC - 10.0.1.3 255.255.255.0 10.0.1.1
ASA - GigabitEthernet 1: 10.0.1.1 255.255.255.0
-----------------------------------------------------------------
ASA - 1 Connect (LAN outide) R1
ASA - GigabitEthernet 0: 172.30.1.2 255.255.255.252
R1 - FastEthernet 0/0: 172.30.1.1 255.255.255.252
---------------------------------------------------------------------
R1 R2 to connect
R1 - FastEthernet 0/1: 172.30.2.1 255.255.255.252
R2 - FastEthernet 0/1: 172.30.2.2 255.255.255.252
R2 for lan connection 2
--------------------------------------------------------------------
R2 to connect LAN2
R2 - FastEthernet 0/0: 10.0.2.1 255.255.255.0
PC - 10.0.2.3 255.255.255.0 10.0.2.1
ASA configuration:
1 GigabitEthernet interface
nameif inside
security-level 100
IP 10.0.1.1 255.255.255.0
no downtime
interface GigabitEthernet 0
nameif outside
security-level 0
IP 172.30.1.2 255.255.255.252
no downtime
Route outside 0.0.0.0 0.0.0.0 172.30.1.1------------------------------------------------------------
access-list scope LAN1 to LAN2 ip 10.0.1.0 allow 255.255.255.0 10.0.2.0 255.255.255.0
object obj LAN
subnet 10.0.1.0 255.255.255.0
object obj remote network
10.0.2.0 subnet 255.255.255.0
NAT (inside, outside) 1 static source obj-local obj-local destination obj-remote control remote obj non-proxy-arp static-----------------------------------------------------------
IKEv1 crypto policy 10
preshared authentication
aes encryption
sha hash
Group 2
life 3600
Crypto ikev1 allow outside
crypto isakmp identity address------------------------------------------------------------
tunnel-group 172.30.2.2 type ipsec-l2l
tunnel-group 172.30.2.2 ipsec-attributes
IKEv1 pre-shared-key cisco123
Crypto ipsec transform-set esp-aes-192 ASA1TS, esp-sha-hmac ikev1-------------------------------------------------------------
card crypto ASA1VPN 10 is the LAN1 to LAN2 address
card crypto ASA1VPN 10 set peer 172.30.2.2
card crypto ASA1VPN 10 set transform-set ASA1TS ikev1
card crypto ASA1VPN set 10 security-association life seconds 3600
ASA1VPN interface card crypto outsideR2 configuration:
interface fastEthernet 0/0
IP 10.0.2.1 255.255.255.0
no downtime
interface fastEthernet 0/1
IP 172.30.2.2 255.255.255.252
no downtime-----------------------------------------------------
router RIP
version 2
Network 10.0.2.0
network 172.30.2.0------------------------------------------------------
access-list 102 permit ahp 172.30.1.2 host 172.30.2.2
access-list 102 permit esp 172.30.1.2 host 172.30.2.2
access-list 102 permit udp host 172.30.1.2 host 172.30.2.2 eq isakmp
interface fastEthernet 0/1
IP access-group 102 to------------------------------------------------------
crypto ISAKMP policy 110
preshared authentication
aes encryption
sha hash
Group 2
life 42300------------------------------------------------------
ISAKMP crypto key cisco123 address 172.30.1.2-----------------------------------------------------
Crypto ipsec transform-set esp - aes 128 R2TS------------------------------------------------------
access-list 101 permit tcp 10.0.2.0 0.0.0.255 10.0.1.0 0.0.0.255
------------------------------------------------------
R2VPN 10 ipsec-isakmp crypto map
match address 101
defined by peer 172.30.1.2
PFS Group1 Set
R2TS transformation game
86400 seconds, life of security association set
interface fastEthernet 0/1
card crypto R2VPNI don't know what the problem
Thank you
If the RIP is not absolutely necessary for you, try adding the default route to R2:
IP route 0.0.0.0 0.0.0.0 172.16.2.1
If you want to use RIP much, add permissions ACL 102:
access-list 102 permit udp any any eq 520
-
Bypass the router upstream company ACL with IPSEC VPN
Hello
My headquarters has a routing infrastructure company. I want to configure a Site VPN to IPSEC as a solution of webvpn AnyConnect for my users through the company. If the security guys to create an ACL on the router upstream from my Cisco ASA 5585 to allow IPSEC between 28 (the stretch between my external interface of ASA and the trunk of PO on the upstream router) then I can send ip a whole between my inside interface subnet and subnet within the interface on the ASA distant (still on the company's infrastructure holding constant and correct routing. In short, if a packet is encrypted in an IPSEC packet, IPSEC is not filtered, you can send any traffic, even if it is AS restrictive on a router upstream of the LCA, correct?
Thank you!
Matt
CCNP
You are right, the router can not look in the VPN package. So anything that is transported inside the VPN, it bypasses security company-ACL.
For VPN traffic to your ASA, you need the following protocols/ports:
- UDP/500, UDP4500, IP/50 for IPsec
- UDP/443 for AnyConnect with SSL/TLS, TCP/443
-
site noncisco routers with IPSec VPN
Hello
I try to connect Router 2911 cisco routers noncisco (HP, TPlink) using ipsec site to site vpn with crypto-cards.
the problem is that vpn ensuring shows '#send error' if command "crypto isakmp identity dn" is used (we use it for authentication of certificate based for cisco vpn clients). When I remove the command, vpn works great with noncisco devices.
Please can you advice if there is no option on cisco ios to fix the problem.
Thank you
Giga
good,
try to use the isakmp profile something like below:
crypto isakmp profile test
function identity address 1.1.1.1 255.255.255.255under card crypto profiles isakmp as below:
test 1 test ipsec-isakmp crypto map
-Altaf
-
Using dynamic PAT with IPSec VPN
Hello
I will say first of all thanks for reading this post.
My goal is to create a dynamic PAT for 5 private host 1 ip address public, then to allow this ip address public 1 via an ipsec tunnel.
I have an ASA5555 running on code 9.2 (1). Here's what I have so far:
network of object obj - 12.12.12.12 {mapped address}
host 12.12.12.12
object-group, LAN {address}
host 10.0.0.1
host 10.0.0.2
host 10.0.0.3
host 10.0.0.4
host 10.0.0.5
NAT (inside, outside) dynamic source LOCAL obj - 12.12.12.12
First question - haven't set up that PAT correctly? I'm trying to PAT the local private addresses on the public address 12.12.12.12
Now I would use 12.12.12.12 as interesting traffic and leave it in a vpn tunnel:
access-list 1 extended permit ip host 12.12.12.12 object-group Remote_Network
This configuration seems correct? Is there another way to accomplish the same task?
Thank you for your time.
Looks good so far.
But if this PAT is only for VPN traffic, then you can change the policy-nat NAT rule:
nat (inside,outside) source dynamic LOCAL obj-12.12.12.12 destination static Remote_Network Remote_Network
-
IPSec VPN in the context of security... Static interface or not?
Hello
For the moment, I have a pair of ASA5510 in context configured Multiple. Everything is ok, but we use til now only the ACL functions.
Now, I would be interested in configuration 2 contexts, with IPSec VPN. A VPN by context. But I can't find any information if it would be possible to use a common interface for both contexts. My wish would be only to spare public IPs...
If I have to configure VPN 100 100 contexts, I need 100 public IPs?
Thanks to anyone who can give me a tip,
Kind regards
Olivier
Hello
If you have separate IP addresses on the same subnet, you can reach these interfaces to different contexts
You only configure a sub with a interface ID Vlan that is connected to the gateway of the ISP. You can join this subinterface settings as much as you want but the IP address on the interface must naturally be different in each context. To my knowledge ASA really prevent you from setting up the IP address if she sees him in a different context in the same subinterface.
-Jouni
-
Hi all
I find this compression of supporting IPPCP 2600XM for IPSec VPN. It seems that it is supported only with a VPN module, is it?
What would you say if I don't have module VPN, but the IPSec VPN configuration and compression for a connection low speed?
BTW, the IPSec VPN and "compress stac" can co-exist?
Also, what kind of compression support in 28xx with IPSec VPN?
Thank you very much.
MAK
MAK,
It depends on the installed vpn module. The previous support compression, but the compression is performed in software, not on the card, which offers only encryption. For this to work, you must run IOS 12.2 (13) T or later.
If your previous IOS running, you cannot use compression alongside encryption PURPOSE cards at all.
The latest maps AIM-VPN /? P II IPPC support in hardware.
More information is here:
http://www.Cisco.com/en/us/products/HW/routers/ps259/products_data_sheet09186a0080088750.html
This link displays information related to the release of functionality of software compression of 12.2 (13) T
Thus, the options you have depend on the IOS and the card BUT you have.
Beginning IOS and card without compression
12.2 (13) T and IOS beginning, hardware encryption software compression
Last map and supporting encryption and hardware compression IOS.
I'm unsure of the 2800 series, I expected that they support the latest novelty of compression and hardware encryption.
Andy
-
communications between IPSec VPN and AnyConnect SSLVPN
Hi all
I have 2 ASAs and interconnected with ipsec VPN.
one of the ASA has SSLVPN users to access intranet resources.
but do not know how to get inside the network on an another ASA
my network architecture is less to:
192.168.1.0/24---ASA1---Internet---ASA2---172.24.0.0/16
SSLVPN use 192.168.55.0/24 ip on the external interface
L2L IPSec VPN is established between ASA1 and ASA2
192.168.1.x could access 172.24.0.0/16 via NATing to of ASA2 inside the ip interface
But now I want 192.168.55.0/24 access 172.24.0.0/16, some set up but does not work...
Are there any suggestions?
Thank you very much
Hi the split tunnel, you add with the ASA2 network should allow vpn clients send the traffic through the tunnel when they want to reach the remote subnet.
Can add you this too
nonat_outside ip access list allow
NAT (outside) 0-list of access nonat_outside
Also in the config you have not added the crypto to ASA1 acl entry. who is 192.168.55.0 to 172.24.0.0
See if that helps
-
Need urgent help in the configuration of the Client VPN IPSec Site with crossed on Cisco ASA5510 - 8.2 (1).
Here is the presentation:
There are two leased lines for Internet access - a route 1.1.1.1 and 2.2.2.2, the latter being the default Standard, old East for backup.
I was able to configure the Client VPN IPSec Site
(1) with access to the outside so that the internal network (172.16.0.0/24) behind the asa
(2) with Split tunnel with simultaneous assess internal LAN and Internet on the outside.
But I was not able to make the tradiotional model Hairpinng to work in this scenario.
I followed every possible suggestions made on this subject in many topics of Discussion but still no luck. Can someone help me here please?
Here is the race-Conf with Normal Client to Site IPSec VPN configured with no access boarding:
LIMITATION: Cannot boot into any other image ios for unavoidable reasons, must use 8.2 (1)
race-conf - Site VPN Customer normal work without internet access/split tunnel
:
ASA Version 8.2 (1)
!
ciscoasa hostname
domain cisco.campus.com
enable the encrypted password xxxxxxxxxxxxxx
XXXXXXXXXXXXXX encrypted passwd
names of
!
interface GigabitEthernet0/0
nameif outside internet1
security-level 0
IP 1.1.1.1 255.255.255.240
!
interface GigabitEthernet0/1
nameif outside internet2
security-level 0
IP address 2.2.2.2 255.255.255.224
!
interface GigabitEthernet0/2
nameif dmz interface
security-level 0
IP 10.0.1.1 255.255.255.0
!
interface GigabitEthernet0/3
nameif campus-lan
security-level 0
IP 172.16.0.1 255.255.0.0
!
interface Management0/0
nameif CSC-MGMT
security-level 100
the IP 10.0.0.4 address 255.255.255.0
!
boot system Disk0: / asa821 - k8.bin
boot system Disk0: / asa843 - k8.bin
passive FTP mode
DNS server-group DefaultDNS
domain cisco.campus.com
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group network cmps-lan
the object-group CSC - ip network
object-group network www-Interior
object-group network www-outside
object-group service tcp-80
object-group service udp-53
object-group service https
object-group service pop3
object-group service smtp
object-group service tcp80
object-group service http-s
object-group service pop3-110
object-group service smtp25
object-group service udp53
object-group service ssh
object-group service tcp-port
port udp-object-group service
object-group service ftp
object-group service ftp - data
object-group network csc1-ip
object-group service all-tcp-udp
access list INTERNET1-IN extended permit ip host 1.2.2.2 2.2.2.3
access-list extended SCC-OUT permit ip host 10.0.0.5 everything
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq www
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any https eq
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq ssh
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 no matter what eq ftp
list of access CAMPUS-LAN extended permitted udp 172.16.0.0 255.255.0.0 no matter what eq field
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq smtp
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq pop3
access CAMPUS-wide LAN ip allowed list a whole
access-list CSC - acl note scan web and mail traffic
access-list CSC - acl extended permit tcp any any eq smtp
access-list CSC - acl extended permit tcp any any eq pop3
access-list CSC - acl note scan web and mail traffic
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 993
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq imap4
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 465
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq www
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq https
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq smtp
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq pop3
access-list extended INTERNET2-IN permit ip any host 1.1.1.2
access-list sheep extended ip 172.16.0.0 allow 255.255.0.0 172.16.0.0 255.255.0.0
access list DNS-inspect extended permit tcp any any eq field
access list DNS-inspect extended permit udp any any eq field
access-list extended capin permit ip host 172.16.1.234 all
access-list extended capin permit ip host 172.16.1.52 all
access-list extended capin permit ip any host 172.16.1.52
Capin list extended access permit ip host 172.16.0.82 172.16.0.61
Capin list extended access permit ip host 172.16.0.61 172.16.0.82
access-list extended capout permit ip host 2.2.2.2 everything
access-list extended capout permit ip any host 2.2.2.2
Access campus-lan_nat0_outbound extended ip 172.16.0.0 list allow 255.255.0.0 192.168.150.0 255.255.255.0
pager lines 24
Enable logging
debug logging in buffered memory
asdm of logging of information
Internet1-outside of MTU 1500
Internet2-outside of MTU 1500
interface-dmz MTU 1500
Campus-lan of MTU 1500
MTU 1500 CSC-MGMT
IP local pool 192.168.150.2 - 192.168.150.250 mask 255.255.255.0 vpnpool1
IP check path reverse interface internet2-outside
IP check path reverse interface interface-dmz
IP check path opposite campus-lan interface
IP check path reverse interface CSC-MGMT
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 621.bin
don't allow no asdm history
ARP timeout 14400
interface of global (internet1-outside) 1
interface of global (internet2-outside) 1
NAT (campus-lan) 0-campus-lan_nat0_outbound access list
NAT (campus-lan) 1 0.0.0.0 0.0.0.0
NAT (CSC-MGMT) 1 10.0.0.5 255.255.255.255
static (CSC-MGMT, internet2-outside) 2.2.2.3 10.0.0.5 netmask 255.255.255.255
Access-group INTERNET2-IN interface internet1-outside
group-access INTERNET1-IN interface internet2-outside
group-access CAMPUS-LAN in campus-lan interface
CSC-OUT access-group in SCC-MGMT interface
Internet2-outside route 0.0.0.0 0.0.0.0 2.2.2.5 1
Route internet1-outside 0.0.0.0 0.0.0.0 1.1.1.5 2
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication enable LOCAL console
Enable http server
http 10.0.0.2 255.255.255.255 CSC-MGMT
http 10.0.0.8 255.255.255.255 CSC-MGMT
HTTP 1.2.2.2 255.255.255.255 internet2-outside
HTTP 1.2.2.2 255.255.255.255 internet1-outside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs set group5
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
Crypto map internet2-outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
crypto internet2-outside_map outside internet2 network interface card
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
Crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca xyzxyzxyzyxzxyzxyzxyzxxyzyxzyxzy
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as
quit smoking
ISAKMP crypto enable internet2-outside
crypto ISAKMP policy 10
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
Telnet 10.0.0.2 255.255.255.255 CSC-MGMT
Telnet 10.0.0.8 255.255.255.255 CSC-MGMT
Telnet timeout 5
SSH 1.2.3.3 255.255.255.240 internet1-outside
SSH 1.2.2.2 255.255.255.255 internet1-outside
SSH 1.2.2.2 255.255.255.255 internet2-outside
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal VPN_TG_1 group policy
VPN_TG_1 group policy attributes
Protocol-tunnel-VPN IPSec
username ssochelpdesk encrypted password privilege 15 xxxxxxxxxxxxxx
privilege of encrypted password username administrator 15 xxxxxxxxxxxxxx
username vpnuser1 encrypted password privilege 0 xxxxxxxxxxxxxx
username vpnuser1 attributes
VPN-group-policy VPN_TG_1
type tunnel-group VPN_TG_1 remote access
attributes global-tunnel-group VPN_TG_1
address vpnpool1 pool
Group Policy - by default-VPN_TG_1
IPSec-attributes tunnel-group VPN_TG_1
pre-shared-key *.
!
class-map cmap-DNS
matches the access list DNS-inspect
CCS-class class-map
corresponds to the CSC - acl access list
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
CCS category
CSC help
cmap-DNS class
inspect the preset_dns_map dns
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum: y0y0y0y0y0y0y0y0y0y0y0y0y0y
: end
Adding dynamic NAT for 192.168.150.0/24 on the external interface works, or works the sysopt connection permit VPN
Please tell what to do here, to pin all of the traffic Internet from VPN Clients.
That is, that I need clients connected via VPN tunnel, when connected to the internet, should have their addresses IP NAT'ted against the address of outside internet2 network 2.2.2.2 interface, as it happens for the customers of Campus (172.16.0.0/16)
I am well aware of all involved in here, so please be elaborative in your answers. Please let me know if you need more information about this configuration to respond to my request.
Thank you & best regards
MAXS
Hello
If possible, I'd like to see that a TCP connection attempt (e.g. http://www.google.com) in the ASDM logging of the VPN Client when you set up the dynamic NAT for the VPN Pool also.
I'll try also the command "packet - trace" on the SAA, while the VPN Client is connected to the ASA.
The command format is
packet-tracer intput tcp
That should tell what the SAA for this kind of package entering its "input" interface
Still can not see something wrong with the configuration (other than the statement of "nat" missing Dynamics PAT)
-Jouni
-
ISA500 site by site ipsec VPN with Cisco IGR
Hello
I tried a VPN site by site work with Openswan and Cisco 2821 router configuration an Ipsec tunnel to site by site with Cisco 2821 and ISA550.
But without success.
my config for openswan, just FYI, maybe not importand for this problem
installation of config
protostack = netkey
nat_traversal = yes
virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12,%4:!$RIGHT_SUBNET
nhelpers = 0
Conn rz1
IKEv2 = no
type = tunnel
left = % all
leftsubnet=192.168.5.0/24
right =.
rightsourceip = 192.168.1.2
rightsubnet=192.168.1.0/24
Keylife 28800 = s
ikelifetime 28800 = s
keyingtries = 3
AUTH = esp
ESP = aes128-sha1
KeyExchange = ike
authby secret =
start = auto
IKE = aes128-sha1; modp1536
dpdaction = redΘmarrer
dpddelay = 30
dpdtimeout = 60
PFS = No.
aggrmode = no
Config Cisco 2821 for dynamic dialin:
crypto ISAKMP policy 1
BA aes
sha hash
preshared authentication
Group 5
lifetime 28800
!
card crypto CMAP_1 1-isakmp dynamic ipsec DYNMAP_1
!
access-list 102 permit ip 192.168.1.0 0.0.0.255 192.168.5.0 0.0.0.255
!
Crypto ipsec transform-set ESP-AES-SHA1 esp - aes esp-sha-hmac
crypto dynamic-map DYNMAP_1 1
game of transformation-ESP-AES-SHA1
match address 102
!
ISAKMP crypto key
address 0.0.0.0 0.0.0.0 ISAKMP crypto keepalive 30 periodicals
!
life crypto ipsec security association seconds 28800
!
interface GigabitEthernet0/0.4002
card crypto CMAP_1
!
I tried ISA550 a config with the same constelations, but without suggesting.
Anyone has the same problem?
And had anyone has a tip for me, or has someone expirense with a site-by-site with ISA550 and Cisco 2821 ipsec tunnel?
I can successfully establish a tunnel between openswan linux server and the isa550.
Patrick,
as you can see on newspapers, the software behind ISA is also OpenSWAN
I have a facility with a 892 SRI running which should be the same as your 29erxx.
Use your IOS Config dynmap, penny, you are on the average nomad. If you don't have any RW customer you shoul go on IOS "No.-xauth" after the isakmp encryption key.
Here is my setup, with roardwarrior AND 2, site 2 site.
session of crypto consignment
logging crypto ezvpn
!
crypto ISAKMP policy 1
BA 3des
preshared authentication
Group 2
lifetime 28800
!
crypto ISAKMP policy 2
BA 3des
md5 hash
preshared authentication
Group 2
lifetime 28800
!
crypto ISAKMP policy 3
BA 3des
preshared authentication
Group 2
!
crypto ISAKMP policy 4
BA 3des
md5 hash
preshared authentication
Group 2
!
crypto ISAKMP policy 5
BA 3des
preshared authentication
Group 2
life 7200
ISAKMP crypto address XXXX XXXXX No.-xauth key
XXXX XXXX No.-xauth address isakmp encryption key
!
ISAKMP crypto client configuration group by default
key XXXX
DNS XXXX
default pool
ACL easyvpn_client_routes
PFS
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac FEAT
!
dynamic-map crypto VPN 20
game of transformation-FEAT
market arriere-route
!
!
card crypto client VPN authentication list by default
card crypto VPN isakmp authorization list by default
crypto map VPN client configuration address respond
10 VPN ipsec-isakmp crypto map
Description of VPN - 1
defined peer XXX
game of transformation-FEAT
match the address internal_networks_ipsec
11 VPN ipsec-isakmp crypto map
VPN-2 description
defined peer XXX
game of transformation-FEAT
PFS group2 Set
match the address internal_networks_ipsec2
card crypto 20-isakmp dynamic VPN ipsec VPN
!
!
Michael
Please note all useful posts
-
Problem Cisco 2811 with L2TP IPsec VPN
Hello. Sorry for my English. Help me please. I have problem with L2TP over IPsec VPN when I connect with Android phones. Even if I connect with laptop computers. I have Cisco 2811 - Cisco IOS software, 2800 Software (C2800NM-ADVIPSERVICESK9-M), Version 12.4 (2) T2, (fc3) SOFTWARE VERSION. I configured on L2TP over IPsec VPN with Radius Authentication
My config:
!
AAA new-model
!
!
AAA authentication login default local
Ray of AAA for authentication ppp default local group
AAA authorization network default authenticated if
start-stop radius group AAA accounting network L2TP_RADIUS!
dhcp L2tp IP pool
network 192.168.100.0 255.255.255.0
default router 192.168.100.1
domain.local domain name
192.168.101.12 DNS server
18c0.a865.c0a8.6401 hexagonal option 121
18c0.a865.c0a8.6401 hexagonal option 249VPDN enable
!
VPDN-group sec_groupe
! Default L2TP VPDN group
accept-dialin
L2tp Protocol
virtual-model 1
no authentication of l2tp tunnelsession of crypto consignment
!
crypto ISAKMP policy 5
BA 3des
preshared authentication
Group 2
!
crypto ISAKMP policy 55
BA 3des
md5 hash
preshared authentication
Group 2ISAKMP crypto key... address 0.0.0.0 0.0.0.0
invalid-spi-recovery crypto ISAKMP
ISAKMP crypto keepalive 10 periodicals
!
life crypto ipsec security association seconds 28000
!
Crypto ipsec transform-set esp-3des esp-sha-hmac L2TP
transport mode
Crypto ipsec transform-set esp-3des esp-md5-hmac 3DESMD5
need transport mode
!!
!
crypto dynamic-map DYN - map 10
Set nat demux
game of transformation-L2TP
!
!
Crypto map 10 L2TP-VPN ipsec-isakmp dynamic DYN-mapinterface Loopback1
Description * L2TP GateWay *.
IP 192.168.100.1 address 255.255.255.255interface FastEthernet0/0
Description * Internet *.
address IP 95.6... 255.255.255.248
IP access-group allow-in-of-wan in
IP access-group allows-off-of-wan on
no ip redirection
no ip unreachable
no ip proxy-arp
NAT outside IP
IP virtual-reassembly
IP route cache policy
automatic duplex
automatic speed
L2TP-VPN crypto card
!interface virtual-Template1
Description * PPTP *.
IP unnumbered Loopback1
IP access-group L2TP_VPN_IN in
AutoDetect encapsulation ppp
default IP address dhcp-pool L2tp peer
No keepalive
PPP mtu Adaptive
PPP encryption mppe auto
PPP authentication ms-chap-v2 callin
PPP accounting L2TP_RADIUSL2TP_VPN_IN extended IP access list
permit any any icmp echo
IP 192.168.100.0 allow 0.0.0.255 192.168.101.0 0.0.0.255
IP 192.168.100.0 allow 0.0.0.255 192.168.3.0 0.0.0.255
allow udp any any eq bootps
allow udp any any eq bootpc
deny ip any any journal entryRADIUS-server host 192.168.101.15 auth-port 1812 acct-port 1813
RADIUS server retry method reorganize
RADIUS server retransmit 2
Server RADIUS 7 key...Debugging shows me
234195: * 3 Feb 18:53:38: ISAKMP (0:0): received 93.73.161.229 packet dport 500 sport 500 SA NEW Global (N)
234196: * 3 Feb 18:53:38: ISAKMP: created a struct peer 93.73.161.229, peer port 500
234197: * 3 Feb 18:53:38: ISAKMP: new position created post = 0x47D305BC peer_handle = 0x80007C5F
234198: * 3 Feb 18:53:38: ISAKMP: lock struct 0x47D305BC, refcount 1 to peer crypto_isakmp_process_block
234199: * 3 Feb 18:53:38: ISAKMP: 500 local port, remote port 500
234200: * 3 Feb 18:53:38: insert his with his 480CFF64 = success
234201: * 3 Feb 18:53:38: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
234202: * 3 Feb 18:53:38: ISAKMP: (0): former State = new State IKE_READY = IKE_R_MM1
234203: * 3 Feb 18:53:38: ISAKMP: (0): treatment ITS payload. Message ID = 0
234204: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234205: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69
234206: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234207: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 164
234208: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234209: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 123
234210: * 3 Feb 18:53:38: ISAKMP: (0): provider ID is NAT - T v2
234211: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234212: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 221
234213: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234214: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 194
234215: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234216: * 3 Feb 18:53:38: ISAKMP: (0): provider ID is DPD
234217: * 3 Feb 18:53:38: ISAKMP: (0): looking for a key corresponding to 93.73.161.229 in default
234218: * 3 Feb 18:53:38: ISAKMP: (0): success
234219: * 3 Feb 18:53:38: ISAKMP: (0): pair found pre-shared key matching 93.73.161.229
234220: * 3 Feb 18:53:38: ISAKMP: (0): pre-shared key local found
234221: * 3 Feb 18:53:38: ISAKMP: analysis of the profiles for xauth...
234222: * 3 Feb 18:53:38: ISAKMP: (0): audit ISAKMP transform 1 against policy priority 5
234223: * 3 Feb 18:53:38: ISAKMP: type of life in seconds
234224: * 3 Feb 18:53:38: ISAKMP: life (basic) of 28800
234225: * 3 Feb 18:53:38: ISAKMP: 3DES-CBC encryption
234226: * 3 Feb 18:53:38: ISAKMP: pre-shared key auth
234227: * 3 Feb 18:53:38: ISAKMP: SHA hash
234228: * 3 Feb 18:53:38: ISAKMP: group by default 2
234229: * 3 Feb 18:53:38: ISAKMP: (0): atts are acceptable. Next payload is 3
234230: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234231: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 69
234232: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234233: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 164
234234: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234235: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 123
234236: * 3 Feb 18:53:38: ISAKMP: (0): provider ID is NAT - T v2
234237: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234238: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 221
234239: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234240: * 3 Feb 18:53:38: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 194
234241: * 3 Feb 18:53:38: ISAKMP: (0): load useful vendor id of treatment
234242: * 3 Feb 18:53:38: ISAKMP: (0): provider ID is DPD
234243: * 3 Feb 18:53:38: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
234244: * 3 Feb 18:53:38: ISAKMP: (0): former State = new State IKE_R_MM1 = IKE_R_MM1234245: * 3 Feb 18:53:38: ISAKMP: (0): built the seller-02 ID NAT - t
234246: * 3 Feb 18:53:38: ISAKMP: (0): lot of 93.73.161.229 sending my_port 500 peer_port 500 (R) MM_SA_SETUP
234247: * 3 Feb 18:53:38: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
234248: * 3 Feb 18:53:38: ISAKMP: (0): former State = new State IKE_R_MM1 = IKE_R_MM2234249: * 3 Feb 18:53:38: ISAKMP (0:0): received 93.73.161.229 packet 500 Global 500 (R) sport dport MM_SA_SETUP
234250: * 3 Feb 18:53:38: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
234251: * 3 Feb 18:53:38: ISAKMP: (0): former State = new State IKE_R_MM2 = IKE_R_MM3234252: * 3 Feb 18:53:38: ISAKMP: (0): processing KE payload. Message ID = 0
234253: * 3 Feb 18:53:38: crypto_engine: create DH shared secret
234254: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_DH_SHARE_SECRET (hw) (ipsec)
234255: * 3 Feb 18:53:38: ISAKMP: (0): processing NONCE payload. Message ID = 0
234256: * 3 Feb 18:53:38: ISAKMP: (0): looking for a key corresponding to 93.73.161.229 in default
234257: * 3 Feb 18:53:38: ISAKMP: (0): success
234258: * 3 Feb 18:53:38: ISAKMP: (0): pair found pre-shared key matching 93.73.161.229
234259: * 3 Feb 18:53:38: crypto_engine: create IKE SA
234260: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_SA_CREATE (hw) (ipsec)
234261: * 3 Feb 18:53:38: ISAKMP: receives the payload type 20
234262: * 3 Feb 18:53:38: ISAKMP: receives the payload type 20
234263: * 3 Feb 18:53:38: ISAKMP (0:5912): NAT found, the node outside NAT
234264: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
234265: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM3 = IKE_R_MM3234266: * 3 Feb 18:53:38: ISAKMP: (5912): lot of 93.73.161.229 sending my_port 500 peer_port 500 (R) MM_KEY_EXCH
234267: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
234268: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM3 = IKE_R_MM4234269: * 3 Feb 18:53:38: ISAKMP (0:5912): received 93.73.161.229 packet dport 4500 4500 Global (R) MM_KEY_EXCH sport
234270: * 3 Feb 18:53:38: crypto_engine: package to decipher IKE
234271: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT (hw) (ipsec)
234272: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH
234273: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM4 = IKE_R_MM5234274: * 3 Feb 18:53:38: ISAKMP: (5912): payload ID for treatment. Message ID = 0
234275: * 3 Feb 18:53:38: ISAKMP (0:5912): payload ID
next payload: 8
type: 1
address: 192.168.1.218
Protocol: 17
Port: 500
Length: 12
234276: * 3 Feb 18:53:38: ISAKMP: (5912): peer games * no * profiles
234277: * 3 Feb 18:53:38: ISAKMP: (5912): HASH payload processing. Message ID = 0
234278: * 3 Feb 18:53:38: crypto_engine: hash generate IKE
234279: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234280: * 3 Feb 18:53:38: ISAKMP: (5912): SA authentication status:
authenticated
234281: * 3 Feb 18:53:38: ISAKMP: (5912): SA has been authenticated with 93.73.161.229
234282: * 3 Feb 18:53:38: ISAKMP: (5912): port detected floating port = 4500
234283: * 3 Feb 18:53:38: ISAKMP: attempts to insert a peer and inserted 95.6.../93.73.161.229/4500/ 47D305BC successfully.
234284: * 3 Feb 18:53:38: ISAKMP: (5912): IKE_DPD is enabled, the initialization of timers
234285: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE
234286: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM5 = IKE_R_MM5234287: * 3 Feb 18:53:38: ISAKMP: (5912): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication
234288: * 3 Feb 18:53:38: ISAKMP (0:5912): payload ID
next payload: 8
type: 1
address: 95.6...
Protocol: 17
Port: 0
Length: 12
234289: * 3 Feb 18:53:38: ISAKMP: (5912): the total payload length: 12
234290: * 3 Feb 18:53:38: crypto_engine: hash generate IKE
234291: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234292: * 3 Feb 18:53:38: crypto_engine: package to encrypt IKE
routerindc #.
234293: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_ENCRYPT (hw) (ipsec)
234294: * 3 Feb 18:53:38: ISAKMP: (5912): lot of 93.73.161.229 sending peer_port my_port 4500 4500 (R) MM_KEY_EXCH
234295: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE
234296: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_R_MM5 = IKE_P1_COMPLETE234297: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_INTERNAL, IKE_PHASE1_COMPLETE
234298: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE234299: * 3 Feb 18:53:38: ISAKMP (0:5912): received 93.73.161.229 packet dport 4500 4500 Global (R) QM_IDLE sport
234300: * 3 Feb 18:53:38: ISAKMP: node set-893966165 to QM_IDLE
234301: * 3 Feb 18:53:38: crypto_engine: package to decipher IKE
234302: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT (hw) (ipsec)
234303: * 3 Feb 18:53:38: crypto_engine: hash generate IKE
234304: * 3 Feb 18:53:38: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234305: * 3 Feb 18:53:38: ISAKMP: (5912): HASH payload processing. Message ID =-893966165
234306: * 3 Feb 18:53:38: ISAKMP: (5912): treatment protocol NOTIFIER INITIAL_CONTACT 1
SPI 0, message ID =-893966165, his 480CFF64 =
234307: * 3 Feb 18:53:38: ISAKMP: (5912): SA authentication status:
authenticated
234308: * 3 Feb 18:53:38: ISAKMP: (5912): process of first contact.
dropping existing phase 1 and 2 with 95.6 local... 93.73.161.229 remote remote port 4500
234309: * 3 Feb 18:53:38: ISAKMP: (5912): node-893966165 error suppression FALSE reason 'informational (en) State 1.
234310: * 3 Feb 18:53:38: ISAKMP: (5912): entry = IKE_MESG_FROM_PEER, IKE_INFO_NOTIFY
234311: * 3 Feb 18:53:38: ISAKMP: (5912): former State = new State IKE_P1_COMPLETE = IKE_P1_COMPLETE234312: * 3 Feb 18:53:38: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
234313: * 3 Feb 18:53:39: % s-6-IPACCESSLOGRL: registration of limited or missed rates 150 packages of access list
234314: * 3 Feb 18:53:39: ISAKMP (0:5912): received 93.73.161.229 packet dport 4500 4500 Global (R) QM_IDLE sport
234315: * 3 Feb 18:53:39: ISAKMP: node set-1224389198 to QM_IDLE
234316: * 3 Feb 18:53:39: crypto_engine: package to decipher IKE
234317: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT (hw) (ipsec)
234318: * 3 Feb 18:53:39: crypto_engine: hash generate IKE
234319: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234320: * 3 Feb 18:53:39: ISAKMP: (5912): HASH payload processing. Message ID =-1224389198
234321: * 3 Feb 18:53:39: ISAKMP: (5912): treatment ITS payload. Message ID =-1224389198
234322: * 3 Feb 18:53:39: ISAKMP: (5912): proposal of IPSec checking 1
234323: * 3 Feb 18:53:39: ISAKMP: turn 1, ESP_3DES
234324: * 3 Feb 18:53:39: ISAKMP: attributes of transformation:
234325: * 3 Feb 18:53:39: ISAKMP: type of life in seconds
234326: * 3 Feb 18:53:39: ISAKMP: life of HIS (basic) of 28800
234327: * 3 Feb 18:53:39: ISAKMP: program is 61444 (Transport-UDP)
234328: * 3 Feb 18:53:39: ISAKMP: authenticator is HMAC-SHA
234329: * 3 Feb 18:53:39: CryptoEngine0: validate the proposal
234330: * 3 Feb 18:53:39: ISAKMP: (5912): atts are acceptable.
234331: * 3 Feb 18:53:39: IPSEC (validate_proposal_request): part #1 of the proposal
(Eng. msg key.) Local INCOMING = 95.6..., distance = 93.73.161.229,.
local_proxy = 95.6.../255.255.255.255/17/1701 (type = 1),
remote_proxy = 93.73.161.229/255.255.255.255/17/0 (type = 1),
Protocol = ESP, transform = esp-3des esp-sha-hmac (UDP Transport),
lifedur = 0 and 0kb in
SPI = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 0
234332: * 3 Feb 18:53:39: map_db_find_best found no corresponding card
234333: * 3 Feb 18:53:39: ISAKMP: (5912): processing NONCE payload. Message ID =-1224389198
234334: * 3 Feb 18:53:39: ISAKMP: (5912): payload ID for treatment. Message ID =-1224389198
234335: * 3 Feb 18:53:39: ISAKMP: (5912): payload ID for treatment. Message ID =-1224389198
234336: * 3 Feb 18:53:39: ISAKMP: (5912): ask 1 spis of ipsec
234337: * 3 Feb 18:53:39: ISAKMP: (5912): entrance, node-1224389198 = IKE_MESG_FROM_PEER, IKE_QM_EXCH
234338: * 3 Feb 18:53:39: ISAKMP: (5912): former State = new State IKE_QM_READY = IKE_QM_SPI_STARVE
234339: * 3 Feb 18:53:39: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
234340: * 3 Feb 18:53:39: IPSEC (spi_response): spi getting 834762579 for SA
of 95.6... to 93.73.161.229 for prot 3
234341: * 3 Feb 18:53:39: crypto_engine: hash generate IKE
234342: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
234343: * 3 Feb 18:53:39: crypto_engine: create Security Association IPSec (by QM)
routerindc #.
234344: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IPSEC_KEY_CREATE (hw) (ipsec)
234345: * 3 Feb 18:53:39: crypto_engine: create Security Association IPSec (by QM)
234346: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IPSEC_KEY_CREATE (hw) (ipsec)
234347: * 3 Feb 18:53:39: ISAKMP: (5912): establishing IPSec security associations
234348: * 3 Feb 18:53:39: from 93.73.161.229 to 95.6 SA... (f / i) 0 / 0
(93.73.161.229 to 95.6 proxy...)
234349: * 3 Feb 18:53:39: spi 0x31C17753 and id_conn a 0
234350: * 3 Feb 18:53:39: life of 28800 seconds
234351: * 3 Feb 18:53:39: ITS 95.6 outgoing... to 93.73.161.229 (f / i) 0/0
(proxy 95.6... to 93.73.161.229)
234352: * 3 Feb 18:53:39: spi 0x495A4BD and id_conn a 0
234353: * 3 Feb 18:53:39: life of 28800 seconds
234354: * 3 Feb 18:53:39: crypto_engine: package to encrypt IKE
234355: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_ENCRYPT (hw) (ipsec)
234356: * 3 Feb 18:53:39: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
234357: * 3 Feb 18:53:39: map_db_find_best found no corresponding card
234358: * 3 Feb 18:53:39: IPSec: rate allocated for brother 80000273 Flow_switching
234359: * 3 Feb 18:53:39: IPSEC (policy_db_add_ident): 95.6..., src dest 93.73.161.229, dest_port 4500234360: * 3 Feb 18:53:39: IPSEC (create_sa): its created.
(his) sa_dest = 95.6..., sa_proto = 50.
sa_spi = 0x31C17753 (834762579).
sa_trans = sa_conn_id of hmac-sha-esp, esp-3des = 1165
234361: * 3 Feb 18:53:39: IPSEC (create_sa): its created.
(his) sa_dest = 93.73.161.229, sa_proto = 50,.
sa_spi = 0x495A4BD (76915901).
sa_trans = sa_conn_id of hmac-sha-esp, esp-3des = 1166
234362: * 3 Feb 18:53:39: ISAKMP: (5912): lot of 93.73.161.229 sending peer_port my_port 4500 4500 (R) QM_IDLE
234363: * 3 Feb 18:53:39: ISAKMP: (5912): entrance, node-1224389198 = IKE_MESG_FROM_IPSEC, IKE_SPI_REPLY
234364: * 3 Feb 18:53:39: ISAKMP: (5912): former State = new State IKE_QM_SPI_STARVE = IKE_QM_R_QM2
234365: * 3 Feb 18:53:39: ISAKMP (0:5912): received 93.73.161.229 packet dport 4500 4500 Global (R) QM_IDLE sport
234366: * 3 Feb 18:53:39: crypto_engine: package to decipher IKE
234367: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_DECRYPT (hw) (ipsec)
234368: * 3 Feb 18:53:39: crypto_engine: hash generate IKE
234369: * 3 Feb 18:53:39: CryptoEngine0: CRYPTO_ISA_IKE_HMAC (hw) (ipsec)
routerindc #.
234370: * 3 Feb 18:53:39: ISAKMP: (5912): node-1224389198 error suppression FALSE reason 'QM (wait).
234371: * 3 Feb 18:53:39: ISAKMP: (5912): entrance, node-1224389198 = IKE_MESG_FROM_PEER, IKE_QM_EXCH
234372: * 3 Feb 18:53:39: ISAKMP: (5912): former State = new State IKE_QM_R_QM2 = IKE_QM_PHASE2_COMPLETE
234373: * 3 Feb 18:53:39: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
234374: * 3 Feb 18:53:39: IPSEC (key_engine_enable_outbound): rec would notify of ISAKMP
234375: * 3 Feb 18:53:39: IPSEC (key_engine_enable_outbound): select SA with spinnaker 76915901/50
234376: * 3 Feb 18:53:40: IPSEC (epa_des_crypt): decrypted packet has no control of her identity
routerindc #.
234377: * 3 Feb 18:53:42: IPSEC (epa_des_crypt): decrypted packet has no control of her identity
routerindc #.
234378: * 3 Feb 18:53:44: IPSEC (epa_des_crypt): decrypted packet has no control of her identityAlso when I connect with the phone, I see HIS Active and IPsec tunnel is mounted, but the wire of time tunnel is down and phone connects.
I hope that you will help me. Thank you.
Hi dvecherkin1,
Who IOS you're running, you could hit the next default.
https://Tools.Cisco.com/bugsearch/bug/CSCsg34166/?reffering_site=dumpcr
It may be useful
-Randy-
Evaluate the ticket to help others find the answer quickly.
-
IPsec VPN with Cisco AnyConnect and 1921 ISR G2 router
Hello
Is it possible to establish a remote access VPN IPSec using Cisco Anyconnect client with router Cisco ISR G2 1921.
If someone does share it please the sample configuration. as I've been on this topic since last week a.
My Cisco rep recommended I have not try AnyConnect a router ISR or ASR. So I used an Open Source client. Don't say that AnyConnect won't work, just the route I took on my project. I work good known configuration for a 1921 with strongSwan as a Client. It is with IPSEC and IKEV2 using certificates for authentication.
-
IOS IPSEC VPN with NAT - translation problem
I'm having a problem with IOS IPSEC VPN configuration.
/*
crypto ISAKMP policy 10
BA 3des
preshared authentication
Group 2
ISAKMP crypto keys TEST123 address 205.xx.1.4
!
!
Crypto ipsec transform-set esp-3des esp-sha-hmac CHAIN
!
!
Map 10 CRYPTO map ipsec-isakmp crypto
the value of 205.xx.1.4 peer
transformation-CHAIN game
match address 115
!
interface FastEthernet0/0
Description FOR the EDGE ROUTER
IP address 208.xx.xx.33 255.255.255.252
NAT outside IP
card crypto CRYPTO-map
!
interface FastEthernet0/1
INTERNAL NETWORK description
IP 10.15.2.4 255.255.255.0
IP nat inside
access-list 115 permit 192.xx.xx.128 0.0.0.3 ip 172.xx.1.0 0.0.0.3
*/
(This configuration is incomplete / NAT configuration needed)
Here is the solution that I'm looking for:
When a session is initiated from the "internal network" to the "distance IPSEC - 172.xx.1.0/30 ' network I want the address scheme '10.15.0.0/16' NAT translation deals with '192.xx.xx.128/30' before forwarding via the IPSEC VPN Tunnel.
For more information, see "SCHEMA ATTACHED".
Any help is greatly appreciated!
Thank you
Clint Simmons
Network engineer
You can try the following NAT + route map approach (method 2 in this link)
http://www.Cisco.com/en/us/Tech/tk648/tk361/technologies_tech_note09186a0080093fca.shtml
Thank you
Raja K
Maybe you are looking for
-
FIREFOX rejected MY EMail ADDRESS AS MY USER NAME WHY?
Why a user name cannot be the normal full e-mail address?
-
Libretto U100 in Germany are no longer available?
Hi Fans of Libretto U100, Looks like the Libretto U100 is no longer available in Germany. There is no stores more offering a Libretto U100, even the page Web of Toshiba libretto has been removed. Do any of you know if there will be a successor to the
-
NWZ-s544 updated license information
On the 5 weeks, I had this camera, I learned only to use it for 2 weeks. Whenever I try to play my music a box appears and says "can NOT PLAY. PLEASE CONNECT TO in accordance with THE SOFTWARE LICENSE INFORMATION AND updated"I registered the product
-
need bios pwd reset for Pavilion 15-n013dx win8 halt-code 65925557
need bios pwd reset for Pavilion 15-n013dx win8 serl # [redacted for privacy] halt-code 65925557 A used Guigou the laptop computer and the password of the bios. I see that you have a way to run the stop code to an access code. It's an allmost new
-
high-definition audio Sigma's usage but no sound.
high-definition audio Sigma has check mark green and in-use bu if I test sounds there is no sound what so ever... Why?