Control of the width of the table for printing

Similar Questions

• No control over the computer for printer 8600

  My printer 86600 suddenly has no control of the computer. For example, no option to scan and email, scan and save etc. What happened and how do I get that back.

  Thank you for that updated information.

  If you only have these options as you said, I would recommend uninstalling/reinstalling the HP software. Also, what is your operating system on your computer? Windows. Please follow these steps:

  First of all, please uninstall the software by following this document HP uninstalling the software of the printer. Then, you want to clean your Temp folder. Please follow this document here to help you.

  Now, install the full features on the site of HP software here. Choose your appropriate operating system and download the software. If you need help to install the software, I'll give you a document from HP on install the software of the printer on a wireless or wired (Ethernet) network.

  Please post your results again. Have a good night.

• How to collect statistics on the table for tables in a different schema

  Hi all
  
  I have a table in a schema, and I want to collect statistics for the table in a different schema.
  
  I gave GRANT ALL ON SCHEMA1. T1 TO SCHEMA2;
  
  And when I tried to run the command to collect statistics to help
  
  DBMS_STATS. GATHER_TABLE_STATS (OWNNAME = > 'SCHMEA1', TABNAME = > 'T1');
  
  The function will fail.
  
  Is there a way we can collect statistics of the table for tables in a schema into another schema.
  
  Thank you
  MK.

  You must grant analyze to schema2.

  SY.

• 1.5.4 - slow to expand the tables for oracle 9 connection

  Hello
  
  I have tried version 1.5.4 and have found that in developing the node tables in the Connections tab is extremely slow (about 3 min) for my oracle 9.2.0.6 connections.
  
  As with this [this bug: http://forums.oracle.com/forums/thread.jspa?threadID=867600 & tstart = 0] it's ok on a 10.2.0.3 connection.
  
  Expand the tables for the same connection in 1.5.3 is good too. I'm concerned that this latest version of the sql dev was not particularly well tested with oracle 9 abit.
  
  Oracle 9 is still a supported with sql developer version?
  
  Thank you
  Paul

  This issue is dealt with the last patch, ' check for update ' should take care of everything.

• My Canon Pixma 250 pull the paper into the machine for printing

  My printer will not pull the paper into the machine for printing. I tried to clean the roller, it won't even. Any suggestions to fix this?

  Hello

  I suggest you to contact Canon support for assistance.

  http://USA.Canon.com/Cusa/support

• HP deskjet 4515: changing the settings for print quality

  Hi all

  How can I set the print quality of my printer on my macbook to project quality and black color only

  Welcome to the community of HP, @ahmadzamzam 

  Here is an article for you to see which should help you to change the settings for print quality on your Mac. Please be aware of the ads on the article page and not click on them (or just close them).

  MacLife: How to optimize your print settings

  Good luck

• Remove the table for a photo table control framework

  Hello

  I need to create an array of 2D images. Due to the large amount of elements in the array, the width of the image is reduced to a minimum. However there are still a considerable gap between the 2 adjacent elements in the table (see the attached example), which is caused by the picture in the image control.

  I tried to affect the color of transparent photo frame, but even if it is invisible, it is still there. I tried to customize the control too, but I couldn't find a way to remove the framework (for classic and modern styles).

  (BTW, for the control of classical style, there is an option without color box control framework, but no option for 2D image control.) I need model/photos inside the element of control 2D image, so simple color 1 color box is not enough)

  Could someone help to suggest a way to remove the frame and optimize the density of space in the table? Thank you much in advance.

  PJI

  Hello, PJI,.

  You should be able to define the lower field in the area of the image of the control.

  -Right click Control and choose "Advanced Properties"-> "Customize.."

  -To the editor change order to 'Edit Mode'

  -from the menu, click on 'Window'-> 'display the parts.

  -In the part window, select the frame

  -set new values for top, left, height, and width, so that the image is behind the area of the photo

  I hope this helps.

  UliB

• Set the width of the table for TableView

  I create a new TableView with a few columns and I am trying to set the width of the entire table. I searched the API, but it only gives me setMaxWidth. I tried but it didn't work. Can anyone suggest me how to set the width of the tables.
  
  I do this:
  
  private TableView < XYZ > table = new TableView < XYZ > ();
  
  table.setMaxWidth (600);
  table.setLayoutX (15);
  table. Resize (40, 40);
  
  But nothing has really changed width of the entire table.
  
  Thank you.

  Column resizing policy is what you are looking for.

• How to create the column of the table for long-form Master detail relationship

  Apex 4.1

  Oracle 11g

  I created a form master detail and see the main table hotel_list and table hotel_mapping as detailed below.

  Hotel_list

  ID HOTEL_NAME

  1 Holiday Inn

  Hotel Hilton 2

  Hotel_mapping

  ID HOTEL_NAME MAPPING_NAME

  1 Inn Holiday Inn Select hotel

  2 holiday hotel Holiday Inn Select

  3 hotel Holiday Inn Holiday Inn Hotel

  4 Hilton Hotel Hilton Hotel chain

  Hotel Hilton 5 HiltonHotel

  Table Hotel_name Hotel_list is a linked table Hotel_mapping

  When I add a line to the Hotel_mapping table for the selected row in the hotel_list table, mapping_name of column is null, therefore impossible to create the relationship between the main table and the secondary table.

  I would like to know, how to create the relationship?

  Thank you very much

  Best regards

  Yong Huang,

  simple step see creating a form detailed master with APEX - Assistant Master retail

  and check how to maintain the relationship between two tables,

  simple return the packaged application «Sample of Masters details»

  and try to understand this concept...

  In your example, use Hotel_list.ID as a foreign key in the table Hotel_mapping

  and maintain the relationship with the column ID...

  and choose the display type of the column Hotel_list.ID in table Hotel_mapping as List(Query Based LOV) select.

  otherwise the best way is to create sample on oracle.apex.com

  I hope this helps...

  Leave.

• Do we need the intermediate database if a single execution in real-time duplicate controls with the connector for Siebel Disqualification?

  Still confused:

  Do we need a staging database? We want only to perform real-time duplicate checks.

  Documentation (Guide to integration of Siebel, Oracle® Enterprise Data quality customer Data Service Pack, Version 9.0, April 2013) is not quite clear about this:

  "The staging database is used by the Siebel connector as a staging area for the transfer of data between Siebel and Disqualification when running batch through Data Quality Manager of Siebel." (p. 19)
  

  "The interface in real time of the Disqualification is also used for the batch cleaning tasks (normalization): Siebel sends each record selected for treatment to the Disqualification by batch cleaning web services." (p. 6)
  

  «Double the lot identification and quality of data health check jobs (either full or incremental batch) use interface batch Disqualification.» In this case, the candidate registers for correspondence or health checkups are written to the database shared staging, Disqualification executes a batch on these records and - if pairing - rewritten matches, Siebel picks up and uses to link together the records. "(p. 6)

  
  

  However, for a design it is necessary to plan in advance, if a database is required or not.

  Any suggestions?

  Hello

  The staging database is used only for temporary storage where the interface between Siebel and Disqualification batch is used. It is not necessary at all if only using the interface in real time. Note that some of the 'batch' in Siebel tasks actually use the interface in real time - this applies to all data in batch cleaning jobs in Siebel and also for the workflow "UCM lot" which is in fact orchestrated by calling web services Disqualification.

  In general, the batch interface is only used where Disqualification is attached to Siebel CRM (instead of UCM). Because DQ Siebel lots do not call survival (so that you can only link to potential duplicates together).

  Note that the tables key used for the selection of the candidates belong to the Siebel database in the form of standard tables (S_DQ_CON_KEY and S_DQ_ACC_KEY). They are not in the database shared staging. The staging database is used ONLY for the data transfer for treatment in batches. It seems that you are not intending to use this interface.

  Also note that Disqualification still needs its own repository database, but if you use only a Disqualification in real-time (and not, for example, by using a Disqualification to batch migrate data in Siebel using the interface of the EIM), it should probably not push the database this hard.

  Kind regards

  Mike

• name of the table for work

  Hi all

  in MAINTENANCE SUPER USER--eAM WORK ORDER DEFINITION 
  
  when the work order form is opened AND when work order say MWO_10928 is given and find is clicked
   a new form opens 
  in the bottom of the form there is operations tab,when the operations tab is clicked another form is opened in the bottom of which is Materials tab
  (at this point when i check recod history i get table name  as WIP_OPERATIONS_V )
  for which another form  is opened
  
  can anyone provide me the table name to get the data in this form 

  thanking in advance
  kindly Guide

  Hello

  Prescription operations data & hardware are fetching views: WIP_OPERATIONS_V & WIP_REQUIREMENT_OPERATIONS_V respectively.

  Display data: WIP_OPERATIONS_V comes jointly from base tables: BOM_DEPARTMENTS, BOM_STANDARD_OPERATIONS, WIP_OPERATIONS and MFG_LOOKUPS.

  Display data: WIP_REQUIREMENT_OPERATIONS_V comes jointly from base tables: MTL_SYSTEM_ITEMS_KFV, WIP_OPERATIONS,.
  WIP_REPETITIVE_SCHEDULES, BOM_DEPARTMENTS, MFG_LOOKUPS.

  I think that you should check the definitions of these views.

  HTH
  Sanjay

• Is there a control of the expression for the opening of a string?

  Hello

  Just curious, is there a control of the expression that allows a user to enter a string that could be read by the expression?  I don't see on the submenu Sub "> Effects options for expressions", but thought I would see if anyone has any ideas how to proceed without having to reference an external text file.

  Thank you for your time and help!

  -Laz

  Yes, it's possible, of course, and to make things even less intrusive, I couldn't access comment a layer attribute rather than rename them the current layer.

  But in my situation I am desirous of an AE to select artist in a closed set of channels.  I don't want to enter their own data for fear that there is something wrong with the formatting, etc.  I'd rather have a drop down of sorts for the selection.  Thus, creating null items in the project Panel, naming them with unique names, then dragging in the model and by applying an expression control 'Control of the layer' layer in quesiton, AE artist can choose one of these layers, and then my script can read the value of the control layer name.

• Error when calling sous-modèle with the table for the invoice

  I have an invoice template setup and I need to call different tables based on which company they are run for. Calling the separate from the headers and footers of model sub works fine but when I try to use the approach of template void for the body of the invoice I get an error of caused by: oracle.xdo.parser.v2.XMLParseException: element 'when' not found in ' xsl: choose '.
  
  During the validation of the model sub I get error of * [031111_102337143] [] [ERROR] [line 427.180] illegal closure context XSL table: xsl: choose *.
  
  I think I have to use a different model for the body because a given business xml is one completely different structure than the others, but also the structure of the table.
  
  
  Any help would be greatly appreciated as this is the critical moment
  
  Thank you

  I sent you the modified model. Take a peek inside.

  Thank you
  BIPuser

• How to insert huge records in the table for the practice.

  Hello
  
  I created a new database in my personal inbox. Now, I want some specimen for different practical feature of oracle 10g. I need at least 1,00,000 records with different lines and columns.
  any buddy tell me of any request or package that can create the table and insert unique records in this table.
  
  Looking for valuable advice.
  
  Thank you

  Can be dbms_random.string, dbms_random.value and dbms_random.random can help.

• How do to accumulate data acquired in the table for a real-time XY graph plotting

  I have current and voltage values which I would like to draw the graph XY.

  Problem is that these are 1 d signals.

  1. Please tell me how I can earn these value in table, so I can have my XY trace.

  2. is there another way to plot in time real graphic XY of the acquired values.

  (I use NI 9205 analog module. I can see real-time signals i.e. time vs current and voltage time vs on my front.

  I need voltage vs current values in real time).

  You can help.

  Thank you.

  Try something like this...

  Notes:

  • If you simulate "as soon as possible", you put a period inside the loop.
  • As the table grows forever, you will be eventually run out of memory.
  • Since the x and y of the simulation is at the same frequency, all points will be on the same line.